public inbox for kvm@vger.kernel.org
 help / color / mirror / Atom feed
From: Alexander Graf <agraf@suse.de>
To: kvm@vger.kernel.org
Cc: joro@8bytes.org, anthony@codemonkey.ws, avi@redhat.com
Subject: [PATCH 03/12] Add helper functions for nested SVM v6
Date: Fri, 21 Nov 2008 16:14:33 +0100	[thread overview]
Message-ID: <1227280482-25361-4-git-send-email-agraf@suse.de> (raw)
In-Reply-To: <1227280482-25361-3-git-send-email-agraf@suse.de>

These are helpers for the nested SVM implementation.

- nsvm_printk implements a debug printk variant
- nested_svm_do calls a handler that can accesses gpa-based memory

v3 makes use of the new permission checker
v6 changes:
- streamline nsvm_debug()
- remove printk(KERN_ERR)
- SVME check before CPL check
- give GP error code
- use new EFER constant

Signed-off-by: Alexander Graf <agraf@suse.de>
---
 arch/x86/kvm/svm.c |   85 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 85 insertions(+), 0 deletions(-)

diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index d7bf0a6..dabb8fa 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -48,6 +48,15 @@ MODULE_LICENSE("GPL");
 
 #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
 
+/* Turn on to get debugging output*/
+/* #define NESTED_DEBUG */
+
+#ifdef NESTED_DEBUG
+#define nsvm_printk(fmt, args...) printk(KERN_INFO fmt, ## args)
+#else
+#define nsvm_printk(fmt, args...) do {} while(0)
+#endif
+
 /* enable NPT for AMD64 and X86 with PAE */
 #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
 static bool npt_enabled = true;
@@ -1162,6 +1171,82 @@ static int vmmcall_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int nested_svm_check_permissions(struct vcpu_svm *svm)
+{
+	if (!(svm->vcpu.arch.shadow_efer & EFER_SVME)
+	    || !is_paging(&svm->vcpu)) {
+		kvm_queue_exception(&svm->vcpu, UD_VECTOR);
+		return 1;
+	}
+
+	if (svm->vmcb->save.cpl) {
+		kvm_inject_gp(&svm->vcpu, 0);
+		return 1;
+	}
+
+       return 0;
+}
+
+static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
+{
+	struct page *page;
+
+	down_read(&current->mm->mmap_sem);
+	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
+	up_read(&current->mm->mmap_sem);
+
+	if (is_error_page(page)) {
+		printk(KERN_INFO "%s: could not find page at 0x%llx\n",
+		       __func__, gpa);
+		kvm_release_page_clean(page);
+		kvm_inject_gp(&svm->vcpu, 0);
+		return NULL;
+	}
+	return page;
+}
+
+static int nested_svm_do(struct vcpu_svm *svm,
+			 u64 arg1_gpa, u64 arg2_gpa, void *opaque,
+			 int (*handler)(struct vcpu_svm *svm,
+					void *arg1,
+					void *arg2,
+					void *opaque))
+{
+	struct page *arg1_page;
+	struct page *arg2_page = NULL;
+	void *arg1;
+	void *arg2 = NULL;
+	int retval;
+
+	arg1_page = nested_svm_get_page(svm, arg1_gpa);
+	if(arg1_page == NULL)
+		return 1;
+
+	if (arg2_gpa) {
+		arg2_page = nested_svm_get_page(svm, arg2_gpa);
+		if(arg2_page == NULL) {
+			kvm_release_page_clean(arg1_page);
+			return 1;
+		}
+	}
+
+	arg1 = kmap_atomic(arg1_page, KM_USER0);
+	if (arg2_gpa)
+		arg2 = kmap_atomic(arg2_page, KM_USER1);
+
+	retval = handler(svm, arg1, arg2, opaque);
+
+	kunmap_atomic(arg1, KM_USER0);
+	if (arg2_gpa)
+		kunmap_atomic(arg2, KM_USER1);
+
+	kvm_release_page_dirty(arg1_page);
+	if (arg2_gpa)
+		kvm_release_page_dirty(arg2_page);
+
+	return retval;
+}
+
 static int invalid_op_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
-- 
1.5.6


  reply	other threads:[~2008-11-21 15:14 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-21 15:14 [PATCH 00/12] Add support for nested SVM (kernel) v6 Alexander Graf
2008-11-21 15:14 ` [PATCH 01/12] Clean up VINTR setting v6 Alexander Graf
2008-11-21 15:14   ` [PATCH 02/12] Move EFER and MSR constants to generic x86 code v6 Alexander Graf
2008-11-21 15:14     ` Alexander Graf [this message]
2008-11-21 15:14       ` [PATCH 04/12] Implement GIF, clgi and stgi v6 Alexander Graf
2008-11-21 15:14         ` [PATCH 05/12] Implement hsave v6 Alexander Graf
2008-11-21 15:14           ` [PATCH 06/12] Add VMLOAD and VMSAVE handlers v6 Alexander Graf
2008-11-21 15:14             ` [PATCH 07/12] Add VMRUN handler v6 Alexander Graf
2008-11-21 15:14               ` [PATCH 08/12] Add VMEXIT handler and intercepts v6 Alexander Graf
2008-11-21 15:14                 ` [PATCH 09/12] Allow read access to MSR_VM_VR v6 Alexander Graf
2008-11-21 15:14                   ` [PATCH 10/12] Allow setting the SVME bit v6 Alexander Graf
2008-11-21 15:14                     ` [PATCH 11/12] Only allow setting of EFER_SVME when CPUID SVM is set v6 Alexander Graf
2008-11-21 15:14                       ` [PATCH 12/12] Accelerate nested SVM by emulating parts of GIF=0 v6 Alexander Graf
2008-11-21 16:53                         ` Avi Kivity
2008-11-21 16:58                           ` Alexander Graf
2008-11-21 17:07                             ` Avi Kivity
2008-11-21 17:14                               ` Alexander Graf
2008-11-21 17:18                                 ` Avi Kivity
2008-11-21 17:35                                   ` Alexander Graf
2008-11-21 15:23               ` [PATCH 07/12] Add VMRUN handler v6 Muli Ben-Yehuda
2008-11-21 15:26                 ` Alexander Graf
2008-11-21 15:35                   ` Alexander Graf
2008-11-23  8:06                     ` Muli Ben-Yehuda
2008-11-23 13:48                       ` Alexander Graf
2008-11-23 15:09                         ` Muli Ben-Yehuda

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1227280482-25361-4-git-send-email-agraf@suse.de \
    --to=agraf@suse.de \
    --cc=anthony@codemonkey.ws \
    --cc=avi@redhat.com \
    --cc=joro@8bytes.org \
    --cc=kvm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox