From: Yu Zhao <yu.zhao@intel.com>
To: jbarnes@virtuousgeek.org
Cc: linux-pci@vger.kernel.org, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org, Yu Zhao <yu.zhao@intel.com>
Subject: [PATCH v10 2/7] PCI: restore saved SR-IOV state
Date: Fri, 20 Feb 2009 14:54:43 +0800 [thread overview]
Message-ID: <1235112888-9524-3-git-send-email-yu.zhao@intel.com> (raw)
In-Reply-To: <1235112888-9524-1-git-send-email-yu.zhao@intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
---
drivers/pci/iov.c | 29 +++++++++++++++++++++++++++++
drivers/pci/pci.c | 1 +
drivers/pci/pci.h | 4 ++++
3 files changed, 34 insertions(+), 0 deletions(-)
diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c
index e6736d4..3bca8f8 100644
--- a/drivers/pci/iov.c
+++ b/drivers/pci/iov.c
@@ -128,6 +128,25 @@ static void sriov_release(struct pci_dev *dev)
dev->sriov = NULL;
}
+static void sriov_restore_state(struct pci_dev *dev)
+{
+ int i;
+ u16 ctrl;
+ struct pci_sriov *iov = dev->sriov;
+
+ pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &ctrl);
+ if (ctrl & PCI_SRIOV_CTRL_VFE)
+ return;
+
+ for (i = PCI_SRIOV_RESOURCES; i <= PCI_SRIOV_RESOURCE_END; i++)
+ pci_update_resource(dev, i);
+
+ pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz);
+ pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl);
+ if (iov->ctrl & PCI_SRIOV_CTRL_VFE)
+ msleep(100);
+}
+
/**
* pci_iov_init - initialize the IOV capability
* @dev: the PCI device
@@ -179,3 +198,13 @@ int pci_iov_resource_bar(struct pci_dev *dev, int resno,
return dev->sriov->pos + PCI_SRIOV_BAR +
4 * (resno - PCI_SRIOV_RESOURCES);
}
+
+/**
+ * pci_restore_iov_state - restore the state of the IOV capability
+ * @dev: the PCI device
+ */
+void pci_restore_iov_state(struct pci_dev *dev)
+{
+ if (dev->sriov)
+ sriov_restore_state(dev);
+}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 2eba2a5..8e21912 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -773,6 +773,7 @@ pci_restore_state(struct pci_dev *dev)
}
pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
+ pci_restore_iov_state(dev);
return 0;
}
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 451db74..b24c9e2 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -216,6 +216,7 @@ extern int pci_iov_init(struct pci_dev *dev);
extern void pci_iov_release(struct pci_dev *dev);
extern int pci_iov_resource_bar(struct pci_dev *dev, int resno,
enum pci_bar_type *type);
+extern void pci_restore_iov_state(struct pci_dev *dev);
#else
static inline int pci_iov_init(struct pci_dev *dev)
{
@@ -230,6 +231,9 @@ static inline int pci_iov_resource_bar(struct pci_dev *dev, int resno,
{
return 0;
}
+static inline void pci_restore_iov_state(struct pci_dev *dev)
+{
+}
#endif /* CONFIG_PCI_IOV */
#endif /* DRIVERS_PCI_H */
--
1.6.1
next prev parent reply other threads:[~2009-02-20 6:54 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-20 6:54 [PATCH v10 0/7] PCI: Linux kernel SR-IOV support Yu Zhao
2009-02-20 6:54 ` [PATCH v10 1/7] PCI: initialize and release SR-IOV capability Yu Zhao
2009-03-06 20:08 ` Matthew Wilcox
2009-03-06 22:03 ` Randy Dunlap
2009-03-06 23:31 ` Duyck, Alexander H
2009-03-07 2:38 ` Greg KH
2009-03-10 1:19 ` Yu Zhao
2009-03-11 4:36 ` Greg KH
2009-03-09 8:12 ` Yu Zhao
2009-02-20 6:54 ` Yu Zhao [this message]
2009-03-06 20:09 ` [PATCH v10 2/7] PCI: restore saved SR-IOV state Matthew Wilcox
2009-02-20 6:54 ` [PATCH v10 3/7] PCI: reserve bus range for SR-IOV device Yu Zhao
2009-03-06 20:20 ` Matthew Wilcox
2009-03-09 8:13 ` Yu Zhao
2009-03-09 18:09 ` Randy Dunlap
2009-03-09 18:11 ` Matthew Wilcox
2009-02-20 6:54 ` [PATCH v10 4/7] PCI: add SR-IOV API for Physical Function driver Yu Zhao
2009-03-06 20:37 ` Matthew Wilcox
2009-03-06 21:48 ` Randy Dunlap
2009-03-09 8:29 ` Yu Zhao
2009-03-07 2:40 ` Greg KH
2009-03-09 8:25 ` Yu Zhao
2009-03-09 19:39 ` Greg KH
2009-03-10 1:37 ` Yu Zhao
2009-03-11 4:34 ` Greg KH
2009-02-20 6:54 ` [PATCH v10 5/7] PCI: handle SR-IOV Virtual Function Migration Yu Zhao
2009-03-06 21:13 ` Matthew Wilcox
2009-03-09 8:28 ` Yu Zhao
2009-02-20 6:54 ` [PATCH v10 6/7] PCI: document SR-IOV sysfs entries Yu Zhao
2009-03-06 21:16 ` Matthew Wilcox
2009-03-06 22:35 ` Randy Dunlap
2009-02-20 6:54 ` [PATCH v10 7/7] PCI: manual for SR-IOV user and driver developer Yu Zhao
2009-03-06 21:17 ` Matthew Wilcox
2009-02-24 10:47 ` [PATCH v10 0/7] PCI: Linux kernel SR-IOV support Avi Kivity
2009-02-25 1:36 ` Yu Zhao
2009-03-06 19:33 ` Matthew Wilcox
2009-03-08 14:30 ` Avi Kivity
2009-03-08 15:01 ` Matthew Wilcox
2009-03-09 0:45 ` Greg KH
2009-03-09 3:42 ` Yang, Sheng
2009-03-09 4:35 ` Yang, Sheng
2009-03-09 13:45 ` Avi Kivity
2009-03-06 19:44 ` Matthew Wilcox
2009-03-07 2:34 ` Greg KH
2009-03-10 1:11 ` Yu Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1235112888-9524-3-git-send-email-yu.zhao@intel.com \
--to=yu.zhao@intel.com \
--cc=jbarnes@virtuousgeek.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox