From: Sheng Yang <sheng@linux.intel.com>
To: Avi Kivity <avi@redhat.com>,
Marcelo Tosatti <mtosatti@redhat.com>,
Anthony Liguori <anthony@codemonkey.ws>
Cc: kvm@vger.kernel.org, Sheng Yang <sheng@linux.intel.com>
Subject: [PATCH 07/10] kvm: expose MSI capability to guest
Date: Mon, 2 Mar 2009 16:29:30 +0800 [thread overview]
Message-ID: <1235982573-6932-8-git-send-email-sheng@linux.intel.com> (raw)
In-Reply-To: <1235982573-6932-1-git-send-email-sheng@linux.intel.com>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
---
qemu/hw/device-assignment.c | 112 ++++++++++++++++++++++++++++++++++++++++---
qemu/hw/device-assignment.h | 7 +++
2 files changed, 112 insertions(+), 7 deletions(-)
diff --git a/qemu/hw/device-assignment.c b/qemu/hw/device-assignment.c
index fc05ac7..089c5b7 100644
--- a/qemu/hw/device-assignment.c
+++ b/qemu/hw/device-assignment.c
@@ -265,7 +265,8 @@ static void assigned_dev_pci_write_config(PCIDevice *d, uint32_t address,
}
if ((address >= 0x10 && address <= 0x24) || address == 0x34 ||
- address == 0x3c || address == 0x3d) {
+ address == 0x3c || address == 0x3d ||
+ pci_access_cap_config(d, address, len)) {
/* used for update-mappings (BAR emulation) */
pci_default_write_config(d, address, val, len);
return;
@@ -299,7 +300,8 @@ static uint32_t assigned_dev_pci_read_config(PCIDevice *d, uint32_t address,
AssignedDevice *pci_dev = container_of(d, AssignedDevice, dev);
if ((address >= 0x10 && address <= 0x24) || address == 0x34 ||
- address == 0x3c || address == 0x3d) {
+ address == 0x3c || address == 0x3d ||
+ pci_access_cap_config(d, address, len)) {
val = pci_default_read_config(d, address, len);
DEBUG("(%x.%x): address=%04x val=0x%08x len=%d\n",
(d->devfn >> 3) & 0x1F, (d->devfn & 0x7), address, val, len);
@@ -328,11 +330,13 @@ do_log:
DEBUG("(%x.%x): address=%04x val=0x%08x len=%d\n",
(d->devfn >> 3) & 0x1F, (d->devfn & 0x7), address, val, len);
- /* kill the special capabilities */
- if (address == 4 && len == 4)
- val &= ~0x100000;
- else if (address == 6)
- val &= ~0x10;
+ if (!pci_dev->cap.available) {
+ /* kill the special capabilities */
+ if (address == 4 && len == 4)
+ val &= ~0x100000;
+ else if (address == 6)
+ val &= ~0x10;
+ }
return val;
}
@@ -637,6 +641,96 @@ void assigned_dev_update_irqs()
}
}
+#if defined(KVM_CAP_DEVICE_MSI) && defined (KVM_CAP_IRQ_ROUTING)
+static void assigned_dev_update_msi(PCIDevice *pci_dev, unsigned int ctrl_pos)
+{
+ struct kvm_assigned_irq assigned_irq_data;
+ struct kvm_irq_routing_entry gsi_entry;
+ AssignedDevice *assigned_dev = container_of(pci_dev, AssignedDevice, dev);
+ uint8_t ctrl_byte = pci_dev->cap.config[ctrl_pos];
+
+ memset(&assigned_irq_data, 0, sizeof assigned_irq_data);
+ assigned_irq_data.assigned_dev_id =
+ calc_assigned_dev_id(assigned_dev->h_busnr,
+ (uint8_t)assigned_dev->h_devfn);
+
+ if (ctrl_byte & PCI_MSI_FLAGS_ENABLE) {
+ gsi_entry.u.msi.address_lo = *(uint32_t *)(pci_dev->cap.config +
+ PCI_MSI_ADDRESS_LO);
+ gsi_entry.u.msi.address_hi = 0;
+ gsi_entry.u.msi.data = *(uint16_t *)(pci_dev->cap.config +
+ PCI_MSI_DATA_32);
+ gsi_entry.type = KVM_IRQ_ROUTING_MSI;
+ gsi_entry.gsi = kvm_get_irq_route_gsi(kvm_context);
+ kvm_add_routing_entry(kvm_context, &gsi_entry);
+ if (kvm_commit_irq_routes(kvm_context) < 0) {
+ perror("assigned_dev_enable_msi: kvm_commit_irq_routes");
+ assigned_dev->cap.state &= ~ASSIGNED_DEVICE_MSI_ENABLED;
+ return;
+ }
+ assigned_irq_data.guest_irq = gsi_entry.gsi;
+ assigned_irq_data.flags = KVM_DEV_IRQ_ASSIGN_ENABLE_MSI;
+ } else {
+ assigned_irq_data.guest_irq = assigned_dev->girq;
+ }
+
+ if (kvm_assign_irq(kvm_context, &assigned_irq_data) < 0)
+ perror("assigned_dev_enable_msi");
+ if (assigned_irq_data.flags & KVM_DEV_IRQ_ASSIGN_ENABLE_MSI) {
+ assigned_dev->cap.state |= ASSIGNED_DEVICE_MSI_ENABLED;
+ pci_dev->cap.config[ctrl_pos] |= PCI_MSI_FLAGS_ENABLE;
+ } else {
+ assigned_dev->cap.state &= ~ASSIGNED_DEVICE_MSI_ENABLED;
+ pci_dev->cap.config[ctrl_pos] &= ~PCI_MSI_FLAGS_ENABLE;
+ }
+}
+#endif
+
+void assigned_device_pci_cap_write_config(PCIDevice *pci_dev, uint32_t address,
+ uint32_t val, int len)
+{
+ AssignedDevice *assigned_dev = container_of(pci_dev, AssignedDevice, dev);
+ unsigned int pos = pci_dev->cap.start, ctrl_pos;
+
+ pci_default_cap_write_config(pci_dev, address, val, len);
+#if defined(KVM_CAP_DEVICE_MSI) && defined (KVM_CAP_IRQ_ROUTING)
+ if (assigned_dev->cap.available & ASSIGNED_DEVICE_CAP_MSI) {
+ ctrl_pos = pos + PCI_MSI_FLAGS;
+ if (address <= ctrl_pos && address + len > ctrl_pos)
+ assigned_dev_update_msi(pci_dev, ctrl_pos - pci_dev->cap.start);
+ pos += PCI_CAPABILITY_CONFIG_MSI_LENGTH;
+ }
+#endif
+ return;
+}
+
+static void assigned_device_pci_cap_init(PCIDevice *pci_dev)
+{
+ AssignedDevice *dev = container_of(pci_dev, AssignedDevice, dev);
+ int next_cap_pt;
+ struct pci_access *pacc;
+ int h_bus, h_dev, h_func;
+
+ pci_dev->cap.length = 0;
+ h_bus = dev->h_busnr;
+ h_dev = dev->h_devfn >> 3;
+ h_func = dev->h_devfn & 0x07;
+ pacc = pci_alloc();
+ pci_init(pacc);
+ dev->pdev = pci_get_dev(pacc, 0, h_bus, h_dev, h_func);
+ pci_cleanup(pacc);
+#if defined(KVM_CAP_DEVICE_MSI) && defined (KVM_CAP_IRQ_ROUTING)
+ /* Expose MSI capability
+ * MSI capability is the 1st capability in cap.config */
+ if (pci_find_cap_offset(dev->pdev, PCI_CAP_ID_MSI)) {
+ dev->cap.available |= ASSIGNED_DEVICE_CAP_MSI;
+ pci_dev->cap.config[pci_dev->cap.length] = PCI_CAP_ID_MSI;
+ pci_dev->cap.length += PCI_CAPABILITY_CONFIG_MSI_LENGTH;
+ next_cap_pt = 1;
+ }
+#endif
+}
+
struct PCIDevice *init_assigned_device(AssignedDevInfo *adev, PCIBus *bus)
{
int r;
@@ -692,6 +786,10 @@ struct PCIDevice *init_assigned_device(AssignedDevInfo *adev, PCIBus *bus)
if (r < 0)
goto assigned_out;
+ pci_enable_capability_support(pci_dev, 0, NULL,
+ assigned_device_pci_cap_write_config,
+ assigned_device_pci_cap_init);
+
return &dev->dev;
assigned_out:
diff --git a/qemu/hw/device-assignment.h b/qemu/hw/device-assignment.h
index 0fd78de..39d73d9 100644
--- a/qemu/hw/device-assignment.h
+++ b/qemu/hw/device-assignment.h
@@ -81,6 +81,13 @@ typedef struct {
unsigned char h_busnr;
unsigned int h_devfn;
int bound;
+ struct pci_dev *pdev;
+ struct {
+#define ASSIGNED_DEVICE_CAP_MSI (1 << 0)
+ uint32_t available;
+#define ASSIGNED_DEVICE_MSI_ENABLED (1 << 0)
+ uint32_t state;
+ } cap;
} AssignedDevice;
typedef struct AssignedDevInfo AssignedDevInfo;
--
1.5.4.5
next prev parent reply other threads:[~2009-03-02 8:29 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-02 8:29 [PATCH 0/10 v4] MSI/MSI-X capability in userspace Sheng Yang
2009-03-02 8:29 ` [PATCH 01/10] kvm: Replace force type convert with container_of() Sheng Yang
2009-03-02 8:29 ` [PATCH 02/10] Make device assignment depend on libpci Sheng Yang
2009-03-02 8:29 ` [PATCH 03/10] Figure out device capability Sheng Yang
2009-03-03 12:50 ` Marcelo Tosatti
2009-03-04 3:04 ` Sheng Yang
2009-03-02 8:29 ` [PATCH 04/10] Support for " Sheng Yang
2009-03-03 12:42 ` Marcelo Tosatti
2009-03-04 2:56 ` Sheng Yang
2009-03-04 13:57 ` Marcelo Tosatti
2009-03-02 8:29 ` [PATCH 05/10] kvm: user interface for MSI type irq routing Sheng Yang
2009-03-02 8:29 ` [PATCH 06/10] kvm: libkvm: allocate unused gsi for " Sheng Yang
2009-03-02 8:29 ` Sheng Yang [this message]
2009-03-02 8:29 ` [PATCH 08/10] Add MSI-X related macro to pci.c Sheng Yang
2009-03-02 8:29 ` [PATCH 09/10] kvm: add ioctl KVM_SET_MSIX_ENTRY_NR and KVM_SET_MSIX_ENTRY Sheng Yang
2009-03-02 8:29 ` [PATCH 10/10] kvm: enable MSI-X capabilty for assigned device Sheng Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1235982573-6932-8-git-send-email-sheng@linux.intel.com \
--to=sheng@linux.intel.com \
--cc=anthony@codemonkey.ws \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox