From: Avi Kivity <avi@redhat.com>
To: linux-kernel@vger.kernel.org
Cc: kvm@vger.kernel.org
Subject: [PATCH 21/42] KVM: VMX: Enhance invalid guest state emulation
Date: Mon, 16 Nov 2009 14:19:22 +0200 [thread overview]
Message-ID: <1258373983-8693-22-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1258373983-8693-1-git-send-email-avi@redhat.com>
From: Mohammed Gamal <m.gamal005@gmail.com>
- Change returned handle_invalid_guest_state() to return relevant exit codes
- Move triggering the emulation from vmx_vcpu_run() to vmx_handle_exit()
- Return to userspace instead of repeatedly trying to emulate instructions that have already failed
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
---
arch/x86/kvm/vmx.c | 44 ++++++++++++++++++++------------------------
1 files changed, 20 insertions(+), 24 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 4635298..73cb5dd 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -107,7 +107,6 @@ struct vcpu_vmx {
} rmode;
int vpid;
bool emulation_required;
- enum emulation_result invalid_state_emulation_result;
/* Support for vnmi-less CPUs */
int soft_vnmi_blocked;
@@ -3322,35 +3321,37 @@ static int handle_nmi_window(struct kvm_vcpu *vcpu)
return 1;
}
-static void handle_invalid_guest_state(struct kvm_vcpu *vcpu)
+static int handle_invalid_guest_state(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
enum emulation_result err = EMULATE_DONE;
-
- local_irq_enable();
- preempt_enable();
+ int ret = 1;
while (!guest_state_valid(vcpu)) {
err = emulate_instruction(vcpu, 0, 0, 0);
- if (err == EMULATE_DO_MMIO)
- break;
+ if (err == EMULATE_DO_MMIO) {
+ ret = 0;
+ goto out;
+ }
if (err != EMULATE_DONE) {
kvm_report_emulation_failure(vcpu, "emulation failure");
- break;
+ vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
+ vcpu->run->internal.suberror = KVM_INTERNAL_ERROR_EMULATION;
+ ret = 0;
+ goto out;
}
if (signal_pending(current))
- break;
+ goto out;
if (need_resched())
schedule();
}
- preempt_disable();
- local_irq_disable();
-
- vmx->invalid_state_emulation_result = err;
+ vmx->emulation_required = 0;
+out:
+ return ret;
}
/*
@@ -3406,13 +3407,9 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu)
trace_kvm_exit(exit_reason, kvm_rip_read(vcpu));
- /* If we need to emulate an MMIO from handle_invalid_guest_state
- * we just return 0 */
- if (vmx->emulation_required && emulate_invalid_guest_state) {
- if (guest_state_valid(vcpu))
- vmx->emulation_required = 0;
- return vmx->invalid_state_emulation_result != EMULATE_DO_MMIO;
- }
+ /* If guest state is invalid, start emulating */
+ if (vmx->emulation_required && emulate_invalid_guest_state)
+ return handle_invalid_guest_state(vcpu);
/* Access CR3 don't cause VMExit in paging mode, so we need
* to sync with guest real CR3. */
@@ -3607,11 +3604,10 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu)
if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked))
vmx->entry_time = ktime_get();
- /* Handle invalid guest state instead of entering VMX */
- if (vmx->emulation_required && emulate_invalid_guest_state) {
- handle_invalid_guest_state(vcpu);
+ /* Don't enter VMX if guest state is invalid, let the exit handler
+ start emulation until we arrive back to a valid state */
+ if (vmx->emulation_required && emulate_invalid_guest_state)
return;
- }
if (test_bit(VCPU_REGS_RSP, (unsigned long *)&vcpu->arch.regs_dirty))
vmcs_writel(GUEST_RSP, vcpu->arch.regs[VCPU_REGS_RSP]);
--
1.6.5.2
next prev parent reply other threads:[~2009-11-16 12:19 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-16 12:19 [PATCH 00/42] KVM updates for the 2.6.33 merge window (batch 1/2) Avi Kivity
2009-11-16 12:19 ` [PATCH 01/42] core, x86: Add user return notifiers Avi Kivity
2009-11-16 12:19 ` [PATCH 02/42] x86: Fix user return notifier build Avi Kivity
2009-11-16 12:19 ` [PATCH 03/42] x86: Fix user return notifier put_cpu_var() invocation Avi Kivity
2009-11-16 12:19 ` [PATCH 04/42] KVM: Don't wrap schedule() with vcpu_put()/vcpu_load() Avi Kivity
2009-11-16 12:19 ` [PATCH 05/42] KVM: x86 emulator: Add 'push/pop sreg' instructions Avi Kivity
2009-11-16 12:19 ` [PATCH 06/42] KVM: x86 emulator: Introduce No64 decode option Avi Kivity
2009-11-16 12:19 ` [PATCH 07/42] KVM: Don't pass kvm_run arguments Avi Kivity
2009-11-16 12:19 ` [PATCH 08/42] KVM: Call pic_clear_isr() on pic reset to reuse logic there Avi Kivity
2009-11-16 12:19 ` [PATCH 09/42] KVM: Move irq sharing information to irqchip level Avi Kivity
2009-11-16 12:19 ` [PATCH 10/42] KVM: Change irq routing table to use gsi indexed array Avi Kivity
2009-11-16 12:19 ` [PATCH 11/42] KVM: Maintain back mapping from irqchip/pin to gsi Avi Kivity
2009-11-16 12:19 ` [PATCH 12/42] KVM: Move irq routing data structure to rcu locking Avi Kivity
2009-11-16 12:19 ` [PATCH 13/42] KVM: Move irq ack notifier list to arch independent code Avi Kivity
2009-11-16 12:19 ` [PATCH 14/42] KVM: Convert irq notifiers lists to RCU locking Avi Kivity
2009-11-16 12:19 ` [PATCH 15/42] KVM: Move IO APIC to its own lock Avi Kivity
2009-11-16 12:19 ` [PATCH 16/42] KVM: Drop kvm->irq_lock lock from irq injection path Avi Kivity
2009-11-16 12:19 ` [PATCH 17/42] KVM: Return -ENOTTY on unrecognized ioctls Avi Kivity
2009-11-16 12:19 ` [PATCH 18/42] KVM: Move assigned device code to own file Avi Kivity
2009-11-16 12:19 ` [PATCH 19/42] KVM: x86 emulator: Add missing decoder flags for 'or' instructions Avi Kivity
2009-11-16 12:19 ` [PATCH 20/42] KVM: x86 emulator: Add pusha and popa instructions Avi Kivity
2009-11-16 12:19 ` Avi Kivity [this message]
2009-11-16 12:19 ` [PATCH 22/42] KVM: SVM: remove needless mmap_sem acquision from nested_svm_map Avi Kivity
2009-11-16 12:19 ` [PATCH 23/42] KVM: Activate Virtualization On Demand Avi Kivity
2010-03-17 21:57 ` Dieter Ries
2010-03-17 22:02 ` Alexander Graf
2010-03-17 22:40 ` Dieter Ries
2010-03-17 22:47 ` Alexander Graf
2010-03-18 7:11 ` Dieter Ries
2010-03-18 7:17 ` Alexander Graf
2010-03-19 2:26 ` Dieter Ries
2010-08-08 12:02 ` Serge Belyshev
2010-08-16 13:24 ` Alexander Graf
2010-08-16 13:49 ` Serge Belyshev
2010-08-16 14:13 ` Alexander Graf
2010-03-18 5:41 ` Michael Tokarev
2010-03-18 7:04 ` Dieter Ries
2009-11-16 12:19 ` [PATCH 24/42] KVM: remove duplicated #include Avi Kivity
2009-11-16 12:19 ` [PATCH 25/42] KVM: SVM: reorganize svm_interrupt_allowed Avi Kivity
2009-11-16 12:19 ` [PATCH 26/42] KVM: SVM: don't copy exit_int_info on nested vmrun Avi Kivity
2009-11-16 12:19 ` [PATCH 27/42] KVM: SVM: Remove remaining occurences of rdtscll Avi Kivity
2009-11-16 12:19 ` [PATCH 28/42] KVM: fix lock imbalance in kvm_*_irq_source_id() Avi Kivity
2009-11-16 12:19 ` [PATCH 29/42] KVM: Separate timer intialization into an indepedent function Avi Kivity
2009-11-16 12:19 ` [PATCH 30/42] KVM: Kill the confusing tsc_ref_khz and ref_freq variables Avi Kivity
2009-11-16 12:19 ` [PATCH 31/42] KVM: Fix printk name error in svm.c Avi Kivity
2009-11-16 12:19 ` [PATCH 32/42] KVM: Fix hotplug of CPUs Avi Kivity
2009-11-16 12:19 ` [PATCH 33/42] KVM: remove pre_task_link setting in save_state_to_tss16 Avi Kivity
2009-11-16 12:19 ` [PATCH 34/42] KVM: x86: Refactor guest debug IOCTL handling Avi Kivity
2009-11-16 12:19 ` [PATCH 35/42] KVM: x86: disable paravirt mmu reporting Avi Kivity
2009-11-16 12:19 ` [PATCH 36/42] KVM: x86: Rework guest single-step flag injection and filtering Avi Kivity
2009-11-16 12:19 ` [PATCH 37/42] KVM: x86: include pvclock MSRs in msrs_to_save Avi Kivity
2009-11-16 12:19 ` [PATCH 38/42] KVM: SVM: Notify nested hypervisor of lost event injections Avi Kivity
2009-11-16 12:19 ` [PATCH 39/42] KVM: SVM: Move INTR vmexit out of atomic code Avi Kivity
2009-11-16 12:19 ` [PATCH 40/42] KVM: SVM: Add tracepoint for nested vmrun Avi Kivity
2009-11-16 12:19 ` [PATCH 41/42] KVM: SVM: Add tracepoint for nested #vmexit Avi Kivity
2009-11-16 12:19 ` [PATCH 42/42] KVM: SVM: Add tracepoint for injected #vmexit Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1258373983-8693-22-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox