From: Gleb Natapov <gleb@redhat.com>
To: avi@redhat.com, mtosatti@redhat.com
Cc: kvm@vger.kernel.org
Subject: [PATCHv3 3/4] Add HYPER-V apic access MSRs.
Date: Sun, 17 Jan 2010 15:51:23 +0200 [thread overview]
Message-ID: <1263736284-18780-4-git-send-email-gleb@redhat.com> (raw)
In-Reply-To: <1263736284-18780-1-git-send-email-gleb@redhat.com>
Implement HYPER-V apic MSRs. Spec defines three MSRs that speed-up
access to EOI/TPR/ICR apic registers for PV guests.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Vadim Rozenfeld <vrozenfe@redhat.com>
---
arch/x86/include/asm/kvm_host.h | 2 +
arch/x86/kvm/lapic.c | 31 ++++++++++++++++++++++++++++
arch/x86/kvm/lapic.h | 8 +++++++
arch/x86/kvm/x86.c | 42 +++++++++++++++++++++++++++++++++++---
include/linux/kvm.h | 1 +
5 files changed, 80 insertions(+), 4 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index 67d19e4..a1f0b5d 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -363,6 +363,8 @@ struct kvm_vcpu_arch {
/* used for guest single stepping over the given code position */
u16 singlestep_cs;
unsigned long singlestep_rip;
+ /* fields used by HYPER-V emulation */
+ u64 hv_vapic;
};
struct kvm_mem_alias {
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ba8c045..4b224f9 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1246,3 +1246,34 @@ int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data)
return 0;
}
+
+int kvm_hv_vapic_msr_write(struct kvm_vcpu *vcpu, u32 reg, u64 data)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+
+ if (!irqchip_in_kernel(vcpu->kvm))
+ return 1;
+
+ /* if this is ICR write vector before command */
+ if (reg == APIC_ICR)
+ apic_reg_write(apic, APIC_ICR2, (u32)(data >> 32));
+ return apic_reg_write(apic, reg, (u32)data);
+}
+
+int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 reg, u64 *data)
+{
+ struct kvm_lapic *apic = vcpu->arch.apic;
+ u32 low, high = 0;
+
+ if (!irqchip_in_kernel(vcpu->kvm))
+ return 1;
+
+ if (apic_reg_read(apic, reg, 4, &low))
+ return 1;
+ if (reg == APIC_ICR)
+ apic_reg_read(apic, APIC_ICR2, 4, &high);
+
+ *data = (((u64)high) << 32) | low;
+
+ return 0;
+}
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 40010b0..f5fe32c 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -48,4 +48,12 @@ void kvm_lapic_sync_to_vapic(struct kvm_vcpu *vcpu);
int kvm_x2apic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
int kvm_x2apic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
+
+int kvm_hv_vapic_msr_write(struct kvm_vcpu *vcpu, u32 msr, u64 data);
+int kvm_hv_vapic_msr_read(struct kvm_vcpu *vcpu, u32 msr, u64 *data);
+
+static inline bool kvm_hv_vapic_assist_page_enabled(struct kvm_vcpu *vcpu)
+{
+ return vcpu->arch.hv_vapic & HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE;
+}
#endif
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7d19ee5..99d1d6c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -622,10 +622,11 @@ static inline u32 bit(int bitno)
* kvm-specific. Those are put in the beginning of the list.
*/
-#define KVM_SAVE_MSRS_BEGIN 4
+#define KVM_SAVE_MSRS_BEGIN 5
static u32 msrs_to_save[] = {
MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
+ HV_X64_MSR_APIC_ASSIST_PAGE,
MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
MSR_K6_STAR,
#ifdef CONFIG_X86_64
@@ -1068,10 +1069,36 @@ static int set_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data)
static int set_msr_hyperv(struct kvm_vcpu *vcpu, u32 msr, u64 data)
{
- pr_unimpl(vcpu, "HYPER-V unimplemented wrmsr: 0x%x data 0x%llx\n",
- msr, data);
+ switch (msr) {
+ case HV_X64_MSR_APIC_ASSIST_PAGE: {
+ unsigned long addr;
- return 1;
+ if (!(data & HV_X64_MSR_APIC_ASSIST_PAGE_ENABLE)) {
+ vcpu->arch.hv_vapic = data;
+ break;
+ }
+ addr = gfn_to_hva(vcpu->kvm, data >>
+ HV_X64_MSR_APIC_ASSIST_PAGE_ADDRESS_SHIFT);
+ if (kvm_is_error_hva(addr))
+ return 1;
+ if (clear_user((void __user *)addr, PAGE_SIZE))
+ return 1;
+ vcpu->arch.hv_vapic = data;
+ break;
+ }
+ case HV_X64_MSR_EOI:
+ return kvm_hv_vapic_msr_write(vcpu, APIC_EOI, data);
+ case HV_X64_MSR_ICR:
+ return kvm_hv_vapic_msr_write(vcpu, APIC_ICR, data);
+ case HV_X64_MSR_TPR:
+ return kvm_hv_vapic_msr_write(vcpu, APIC_TASKPRI, data);
+ default:
+ pr_unimpl(vcpu, "HYPER-V unimplemented wrmsr: 0x%x "
+ "data 0x%llx\n", msr, data);
+ return 1;
+ }
+
+ return 0;
}
int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
@@ -1331,6 +1358,12 @@ static int get_msr_hyperv(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
data = r;
break;
}
+ case HV_X64_MSR_EOI:
+ return kvm_hv_vapic_msr_read(vcpu, APIC_EOI, pdata);
+ case HV_X64_MSR_ICR:
+ return kvm_hv_vapic_msr_read(vcpu, APIC_ICR, pdata);
+ case HV_X64_MSR_TPR:
+ return kvm_hv_vapic_msr_read(vcpu, APIC_TASKPRI, pdata);
default:
pr_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
return 1;
@@ -1531,6 +1564,7 @@ int kvm_dev_ioctl_check_extension(long ext)
case KVM_CAP_ADJUST_CLOCK:
case KVM_CAP_VCPU_EVENTS:
case KVM_CAP_HYPERV:
+ case KVM_CAP_HYPERV_VAPIC:
r = 1;
break;
case KVM_CAP_COALESCED_MMIO:
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index e227cba..5ce6173 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -498,6 +498,7 @@ struct kvm_ioeventfd {
#define KVM_CAP_S390_PSW 42
#define KVM_CAP_PPC_SEGSTATE 43
#define KVM_CAP_HYPERV 44
+#define KVM_CAP_HYPERV_VAPIC 45
#ifdef KVM_CAP_IRQ_ROUTING
--
1.6.5
next prev parent reply other threads:[~2010-01-17 13:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-01-17 13:51 [PATCHv3 0/4] Add support for some HYPER-V PV features Gleb Natapov
2010-01-17 13:51 ` [PATCHv3 1/4] Add HYPER-V header file Gleb Natapov
2010-01-17 13:51 ` [PATCHv3 2/4] Implement bare minimum of HYPER-V MSRs Gleb Natapov
2010-01-17 13:51 ` Gleb Natapov [this message]
2010-01-17 13:51 ` [PATCHv3 4/4] Implement NotifyLongSpinWait HYPER-V hypercall Gleb Natapov
2010-01-17 13:59 ` [PATCHv3 0/4] Add support for some HYPER-V PV features Avi Kivity
2010-01-19 11:41 ` Jan Kiszka
2010-01-19 12:50 ` Gleb Natapov
2010-01-19 12:53 ` Avi Kivity
2010-01-19 13:06 ` Gleb Natapov
2010-01-19 14:54 ` Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1263736284-18780-4-git-send-email-gleb@redhat.com \
--to=gleb@redhat.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox