From: Gleb Natapov <gleb@redhat.com>
To: avi@redhat.com, mtosatti@redhat.com
Cc: kvm@vger.kernel.org
Subject: [PATCH v2 08/30] KVM: Provide current eip as part of emulator context.
Date: Sun, 14 Mar 2010 18:20:53 +0200 [thread overview]
Message-ID: <1268583675-3101-9-git-send-email-gleb@redhat.com> (raw)
In-Reply-To: <1268583675-3101-1-git-send-email-gleb@redhat.com>
Eliminate the need to call back into KVM to get it from emulator.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
---
arch/x86/include/asm/kvm_emulate.h | 3 ++-
arch/x86/kvm/emulate.c | 12 ++++++------
arch/x86/kvm/x86.c | 1 +
3 files changed, 9 insertions(+), 7 deletions(-)
diff --git a/arch/x86/include/asm/kvm_emulate.h b/arch/x86/include/asm/kvm_emulate.h
index b048fd2..0765725 100644
--- a/arch/x86/include/asm/kvm_emulate.h
+++ b/arch/x86/include/asm/kvm_emulate.h
@@ -141,7 +141,7 @@ struct decode_cache {
u8 seg_override;
unsigned int d;
unsigned long regs[NR_VCPU_REGS];
- unsigned long eip, eip_orig;
+ unsigned long eip;
/* modrm */
u8 modrm;
u8 modrm_mod;
@@ -160,6 +160,7 @@ struct x86_emulate_ctxt {
struct kvm_vcpu *vcpu;
unsigned long eflags;
+ unsigned long eip; /* eip before instruction emulation */
/* Emulated execution mode, represented by an X86EMUL_MODE value. */
int mode;
u32 cs_base;
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 8bd0557..2c27aa4 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -667,7 +667,7 @@ static int do_insn_fetch(struct x86_emulate_ctxt *ctxt,
int rc;
/* x86 instructions are limited to 15 bytes. */
- if (eip + size - ctxt->decode.eip_orig > 15)
+ if (eip + size - ctxt->eip > 15)
return X86EMUL_UNHANDLEABLE;
eip += ctxt->cs_base;
while (size--) {
@@ -927,7 +927,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
/* Shadow copy of register state. Committed on successful emulation. */
memset(c, 0, sizeof(struct decode_cache));
- c->eip = c->eip_orig = kvm_rip_read(ctxt->vcpu);
+ c->eip = ctxt->eip;
ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
@@ -1878,7 +1878,7 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
}
}
register_address_increment(c, &c->regs[VCPU_REGS_RCX], -1);
- c->eip = kvm_rip_read(ctxt->vcpu);
+ c->eip = ctxt->eip;
}
if (c->src.type == OP_MEM) {
@@ -2447,7 +2447,7 @@ twobyte_insn:
goto done;
/* Let the processor re-execute the fixed hypercall */
- c->eip = kvm_rip_read(ctxt->vcpu);
+ c->eip = ctxt->eip;
/* Disable writeback. */
c->dst.type = OP_NONE;
break;
@@ -2551,7 +2551,7 @@ twobyte_insn:
| ((u64)c->regs[VCPU_REGS_RDX] << 32);
if (kvm_set_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], msr_data)) {
kvm_inject_gp(ctxt->vcpu, 0);
- c->eip = kvm_rip_read(ctxt->vcpu);
+ c->eip = ctxt->eip;
}
rc = X86EMUL_CONTINUE;
c->dst.type = OP_NONE;
@@ -2560,7 +2560,7 @@ twobyte_insn:
/* rdmsr */
if (kvm_get_msr(ctxt->vcpu, c->regs[VCPU_REGS_RCX], &msr_data)) {
kvm_inject_gp(ctxt->vcpu, 0);
- c->eip = kvm_rip_read(ctxt->vcpu);
+ c->eip = ctxt->eip;
} else {
c->regs[VCPU_REGS_RAX] = (u32)msr_data;
c->regs[VCPU_REGS_RDX] = msr_data >> 32;
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 3f2a8d3..6cbac79 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3478,6 +3478,7 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
vcpu->arch.emulate_ctxt.vcpu = vcpu;
vcpu->arch.emulate_ctxt.eflags = kvm_x86_ops->get_rflags(vcpu);
+ vcpu->arch.emulate_ctxt.eip = kvm_rip_read(vcpu);
vcpu->arch.emulate_ctxt.mode =
(!is_protmode(vcpu)) ? X86EMUL_MODE_REAL :
(vcpu->arch.emulate_ctxt.eflags & X86_EFLAGS_VM)
--
1.6.5
next prev parent reply other threads:[~2010-03-14 16:21 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-14 16:20 [PATCH v2 00/30] emulator cleanup Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 01/30] KVM: x86 emulator: Fix DstAcc decoding Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 02/30] KVM: x86 emulator: fix RCX access during rep emulation Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 03/30] KVM: x86 emulator: check return value against correct define Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 04/30] KVM: Remove pointer to rflags from realmode_set_cr parameters Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 05/30] KVM: Provide callback to get/set control registers in emulator ops Gleb Natapov
2010-03-15 13:06 ` Andre Przywara
2010-03-15 13:11 ` Gleb Natapov
2010-03-15 13:13 ` Avi Kivity
2010-03-14 16:20 ` [PATCH v2 06/30] KVM: remove realmode_lmsw function Gleb Natapov
2010-03-15 11:02 ` Andre Przywara
2010-03-15 11:41 ` Avi Kivity
2010-03-14 16:20 ` [PATCH v2 07/30] KVM: Provide x86_emulate_ctxt callback to get current cpl Gleb Natapov
2010-03-15 13:16 ` Andre Przywara
2010-03-15 13:21 ` Gleb Natapov
2010-03-14 16:20 ` Gleb Natapov [this message]
2010-03-14 16:20 ` [PATCH v2 09/30] KVM: x86 emulator: fix mov r/m, sreg emulation Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 10/30] KVM: x86 emulator: fix 0f 01 /5 emulation Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 11/30] KVM: x86 emulator: 0f (20|21|22|23) ignore mod bits Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 12/30] KVM: x86 emulator: inject #UD on access to non-existing CR Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 13/30] KVM: x86 emulator: fix mov dr to inject #UD when needed Gleb Natapov
2010-03-14 16:20 ` [PATCH v2 14/30] KVM: x86 emulator: fix return values of syscall/sysenter/sysexit emulations Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 15/30] KVM: x86 emulator: do not call writeback if msr access fails Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 16/30] KVM: x86 emulator: If LOCK prefix is used dest arg should be memory Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 17/30] KVM: x86 emulator: cleanup grp3 return value Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 18/30] KVM: x86 emulator: Provide more callbacks for x86 emulator Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 19/30] KVM: x86 emulator: Emulate task switch in emulator.c Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 20/30] KVM: x86 emulator: Use load_segment_descriptor() instead of kvm_load_segment_descriptor() Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 21/30] KVM: Use task switch from emulator.c Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 22/30] KVM: x86 emulator: populate OP_MEM operand during decoding Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 23/30] KVM: x86 emulator: add decoding of X,Y parameters from Intel SDM Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 24/30] KVM: x86 emulator: during rep emulation decrement ECX only if emulation succeeded Gleb Natapov
2010-03-14 16:42 ` Avi Kivity
2010-03-14 16:21 ` [PATCH v2 25/30] KVM: x86 emulator: fix in/out emulation Gleb Natapov
2010-03-14 16:54 ` Avi Kivity
2010-03-14 17:35 ` Gleb Natapov
2010-03-15 7:41 ` Avi Kivity
2010-03-15 7:44 ` Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 26/30] KVM: x86 emulator: Move string pio emulation into emulator.c Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 27/30] KVM: x86 emulator: remove saved_eip Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 28/30] KVM: x86 emulator: restart string instruction without going back to a guest Gleb Natapov
2010-03-14 16:56 ` Avi Kivity
2010-03-14 18:06 ` Gleb Natapov
2010-03-15 7:44 ` Avi Kivity
2010-03-15 9:44 ` Gleb Natapov
2010-03-15 9:56 ` Avi Kivity
2010-03-15 10:07 ` Gleb Natapov
2010-03-15 10:15 ` Avi Kivity
2010-03-15 10:19 ` Gleb Natapov
2010-03-15 10:24 ` Avi Kivity
2010-03-15 10:33 ` Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 29/30] KVM: x86 emulator: introduce pio in string read ahead Gleb Natapov
2010-03-14 16:21 ` [PATCH v2 30/30] KVM: small kvm_arch_vcpu_ioctl_run() cleanup Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1268583675-3101-9-git-send-email-gleb@redhat.com \
--to=gleb@redhat.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox