From: Gleb Natapov <gleb@redhat.com>
To: aci@redhat.com, mtosatti@redhat.com
Cc: kvm@vger.kernel.org
Subject: [PATCH 2/2] KVM: x86 emulator: add decoding of CMPXCHG8B dst operand.
Date: Sun, 21 Mar 2010 13:06:03 +0200 [thread overview]
Message-ID: <1269169563-22147-2-git-send-email-gleb@redhat.com> (raw)
In-Reply-To: <1269169563-22147-1-git-send-email-gleb@redhat.com>
Decode CMPXCHG8B destination operand in decoding stage. Fixes regression
introduced by "If LOCK prefix is used dest arg should be memory" commit.
This commit relies on dst operand be decoded at the beginning of an
instruction emulation.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
---
arch/x86/kvm/emulate.c | 24 ++++++++++--------------
1 files changed, 10 insertions(+), 14 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index c1aa983..904351e 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -52,6 +52,7 @@
#define DstMem (3<<1) /* Memory operand. */
#define DstAcc (4<<1) /* Destination Accumulator */
#define DstDI (5<<1) /* Destination is in ES:(E)DI */
+#define DstMem64 (6<<1) /* 64bit memory operand */
#define DstMask (7<<1)
/* Source operand type. */
#define SrcNone (0<<4) /* No source operand. */
@@ -360,7 +361,7 @@ static u32 group_table[] = {
DstMem | SrcImmByte | ModRM, DstMem | SrcImmByte | ModRM | Lock,
DstMem | SrcImmByte | ModRM | Lock, DstMem | SrcImmByte | ModRM | Lock,
[Group9*8] =
- 0, ImplicitOps | ModRM | Lock, 0, 0, 0, 0, 0, 0,
+ 0, DstMem64 | ModRM | Lock, 0, 0, 0, 0, 0, 0,
};
static u32 group2_table[] = {
@@ -1205,6 +1206,7 @@ done_prefixes:
c->twobyte && (c->b == 0xb6 || c->b == 0xb7));
break;
case DstMem:
+ case DstMem64:
if ((c->d & ModRM) && c->modrm_mod == 3) {
c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
c->dst.type = OP_REG;
@@ -1214,7 +1216,10 @@ done_prefixes:
}
c->dst.type = OP_MEM;
c->dst.ptr = (unsigned long *)c->modrm_ea;
- c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
+ if ((c->d & DstMask) == DstMem64)
+ c->dst.bytes = 8;
+ else
+ c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
c->dst.val = 0;
if (c->d & BitOp) {
unsigned long mask = ~(c->dst.bytes * 8 - 1);
@@ -1706,12 +1711,7 @@ static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
struct x86_emulate_ops *ops)
{
struct decode_cache *c = &ctxt->decode;
- u64 old, new;
- int rc;
-
- rc = ops->read_emulated(c->modrm_ea, &old, 8, ctxt->vcpu);
- if (rc != X86EMUL_CONTINUE)
- return rc;
+ u64 old = c->dst.orig_val;
if (((u32) (old >> 0) != (u32) c->regs[VCPU_REGS_RAX]) ||
((u32) (old >> 32) != (u32) c->regs[VCPU_REGS_RDX])) {
@@ -1719,15 +1719,12 @@ static inline int emulate_grp9(struct x86_emulate_ctxt *ctxt,
c->regs[VCPU_REGS_RAX] = (u32) (old >> 0);
c->regs[VCPU_REGS_RDX] = (u32) (old >> 32);
ctxt->eflags &= ~EFLG_ZF;
-
} else {
- new = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
+ c->dst.val = ((u64)c->regs[VCPU_REGS_RCX] << 32) |
(u32) c->regs[VCPU_REGS_RBX];
- rc = ops->cmpxchg_emulated(c->modrm_ea, &old, &new, 8, ctxt->vcpu);
- if (rc != X86EMUL_CONTINUE)
- return rc;
ctxt->eflags |= EFLG_ZF;
+ c->lock_prefix = 1;
}
return X86EMUL_CONTINUE;
}
@@ -3241,7 +3238,6 @@ twobyte_insn:
rc = emulate_grp9(ctxt, ops);
if (rc != X86EMUL_CONTINUE)
goto done;
- c->dst.type = OP_NONE;
break;
}
goto writeback;
--
1.6.5
next prev parent reply other threads:[~2010-03-21 11:06 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-21 11:06 [PATCH 1/2] KVM: x86 emulator: commit rflags as part of registers commit Gleb Natapov
2010-03-21 11:06 ` Gleb Natapov [this message]
2010-03-21 11:09 ` Gleb Natapov
2010-03-21 14:32 ` Avi Kivity
2010-03-21 14:35 ` Gleb Natapov
2010-03-21 14:37 ` Avi Kivity
-- strict thread matches above, loose matches on Subject: below --
2010-03-21 11:08 Gleb Natapov
2010-03-21 11:08 ` [PATCH 2/2] KVM: x86 emulator: add decoding of CMPXCHG8B dst operand Gleb Natapov
2010-03-21 14:41 ` Avi Kivity
2010-03-21 14:44 ` Gleb Natapov
2010-03-21 14:46 ` Avi Kivity
2010-03-23 12:33 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1269169563-22147-2-git-send-email-gleb@redhat.com \
--to=gleb@redhat.com \
--cc=aci@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox