Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[Lucas Meneghel Rodrigues]

On Wed, Apr 14, 2010 at 10:26 AM, Amos Kong <akong@redhat.com> wrote:
> Hi Lucas,
>
> When I execute unattended_install testcases on RHEL-5.5, it always fail when using rhel3.9-32 guest.
> I found it blocked after packages installation. Is it related that rhel39-32 guest don't support acpi ?

I've hit this problem before, it is what I believe to be an anaconda
bug on that particular RHEL version. I tried a *lot* to work around
the problem, spent a lot of time with it, but in the end I just gave
up.

The problem happens because it's simply not possible to bring the
network up at post install stage so the install can communicate with
the host to respond that its installation finished. If anyone can help
to work around the problem that'd be great...

>
> Regards,
> Amos
> _______________________________________________
> Autotest mailing list
> Autotest@test.kernel.org
> http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
>



-- 
Lucas

Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[Lucas Meneghel Rodrigues]

On Wed, Apr 14, 2010 at 11:01 AM, Lucas Meneghel Rodrigues
<lmr@redhat.com> wrote:
> On Wed, Apr 14, 2010 at 10:26 AM, Amos Kong <akong@redhat.com> wrote:
>> Hi Lucas,
>>
>> When I execute unattended_install testcases on RHEL-5.5, it always fail when using rhel3.9-32 guest.
>> I found it blocked after packages installation. Is it related that rhel39-32 guest don't support acpi ?
>
> I've hit this problem before, it is what I believe to be an anaconda
> bug on that particular RHEL version. I tried a *lot* to work around
> the problem, spent a lot of time with it, but in the end I just gave
> up.
>
> The problem happens because it's simply not possible to bring the
> network up at post install stage so the install can communicate with
> the host to respond that its installation finished. If anyone can help
> to work around the problem that'd be great...

For people reading this thread without a lot of context, just for the
record, rhel39-64 bit works just fine.

>>
>> Regards,
>> Amos
>> _______________________________________________
>> Autotest mailing list
>> Autotest@test.kernel.org
>> http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
>>
>
>
>
> --
> Lucas
>



-- 
Lucas

Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[David S. Ahern]

On 04/14/2010 08:01 AM, Lucas Meneghel Rodrigues wrote:
> On Wed, Apr 14, 2010 at 10:26 AM, Amos Kong <akong@redhat.com> wrote:
>> Hi Lucas,
>>
>> When I execute unattended_install testcases on RHEL-5.5, it always fail when using rhel3.9-32 guest.
>> I found it blocked after packages installation. Is it related that rhel39-32 guest don't support acpi ?
> 
> I've hit this problem before, it is what I believe to be an anaconda
> bug on that particular RHEL version. I tried a *lot* to work around
> the problem, spent a lot of time with it, but in the end I just gave
> up.
> 
> The problem happens because it's simply not possible to bring the
> network up at post install stage so the install can communicate with
> the host to respond that its installation finished. If anyone can help
> to work around the problem that'd be great...

What commands are you running to configure the network and what command
is stalling? I've done unattended installs with RHEL3.8, 32-bit guests
with networking enabled.

David


> 
>>
>> Regards,
>> Amos
>> _______________________________________________
>> Autotest mailing list
>> Autotest@test.kernel.org
>> http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
>>
> 
> 
> 

Re: Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[Lucas Meneghel Rodrigues]

On Fri, 2010-04-16 at 08:03 -0600, David S. Ahern wrote:
> 
> On 04/14/2010 08:01 AM, Lucas Meneghel Rodrigues wrote:
> > On Wed, Apr 14, 2010 at 10:26 AM, Amos Kong <akong@redhat.com> wrote:
> >> Hi Lucas,
> >>
> >> When I execute unattended_install testcases on RHEL-5.5, it always fail when using rhel3.9-32 guest.
> >> I found it blocked after packages installation. Is it related that rhel39-32 guest don't support acpi ?
> > 
> > I've hit this problem before, it is what I believe to be an anaconda
> > bug on that particular RHEL version. I tried a *lot* to work around
> > the problem, spent a lot of time with it, but in the end I just gave
> > up.
> > 
> > The problem happens because it's simply not possible to bring the
> > network up at post install stage so the install can communicate with
> > the host to respond that its installation finished. If anyone can help
> > to work around the problem that'd be great...
> 
> What commands are you running to configure the network and what command
> is stalling? I've done unattended installs with RHEL3.8, 32-bit guests
> with networking enabled.

To add some background to the discussion, RHEL3.9 64 bit works just
fine. The kickstart file that installs pretty much all RH based systems
tries to configure the network by calling 'dhclient eth0'. In order to
work, some networking kernel modules need to be loaded.

While debugging the problem, I discovered that it wasn't possible to
load some of the iptables kernel modules (I don't remember exactly which
ones). So I tried many strategies, loading the modules specifying paths,
etc... nothing worked. It seems like those essential networking modules
in the install kernel for 32 bit are missing due to some build problem.

Sure, once the install finished the system will boot on a functional
kernel, but the kernel used by the install system just can't load the
modules, rendering our unattended install system useless, since the host
need to be able to verify whether the guest finished the install through
socket communication.

> David
> 
> 
> > 
> >>
> >> Regards,
> >> Amos
> >> _______________________________________________
> >> Autotest mailing list
> >> Autotest@test.kernel.org
> >> http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
> >>
> > 
> > 
> > 
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[David S. Ahern]

On 04/16/2010 09:36 AM, Lucas Meneghel Rodrigues wrote:
> On Fri, 2010-04-16 at 08:03 -0600, David S. Ahern wrote:
>>
>> On 04/14/2010 08:01 AM, Lucas Meneghel Rodrigues wrote:
>>> On Wed, Apr 14, 2010 at 10:26 AM, Amos Kong <akong@redhat.com> wrote:
>>>> Hi Lucas,
>>>>
>>>> When I execute unattended_install testcases on RHEL-5.5, it always fail when using rhel3.9-32 guest.
>>>> I found it blocked after packages installation. Is it related that rhel39-32 guest don't support acpi ?
>>>
>>> I've hit this problem before, it is what I believe to be an anaconda
>>> bug on that particular RHEL version. I tried a *lot* to work around
>>> the problem, spent a lot of time with it, but in the end I just gave
>>> up.
>>>
>>> The problem happens because it's simply not possible to bring the
>>> network up at post install stage so the install can communicate with
>>> the host to respond that its installation finished. If anyone can help
>>> to work around the problem that'd be great...
>>
>> What commands are you running to configure the network and what command
>> is stalling? I've done unattended installs with RHEL3.8, 32-bit guests
>> with networking enabled.
> 
> To add some background to the discussion, RHEL3.9 64 bit works just
> fine. The kickstart file that installs pretty much all RH based systems
> tries to configure the network by calling 'dhclient eth0'. In order to
> work, some networking kernel modules need to be loaded.
> 
> While debugging the problem, I discovered that it wasn't possible to
> load some of the iptables kernel modules (I don't remember exactly which
> ones). So I tried many strategies, loading the modules specifying paths,
> etc... nothing worked. It seems like those essential networking modules
> in the install kernel for 32 bit are missing due to some build problem.

Ok, so it's firewall related. RHEL3 uses a BOOT kernel and only a subset
of the kernel modules are included in the modules.cgz. It should contain
all of the drivers for the NICs, so networking alone should be fine. Why
are the iptables rules needed to tell the host that the install has
completed?

David


> 
> Sure, once the install finished the system will boot on a functional
> kernel, but the kernel used by the install system just can't load the
> modules, rendering our unattended install system useless, since the host
> need to be able to verify whether the guest finished the install through
> socket communication.
> 
>> David
>>
>>
>>>
>>>>
>>>> Regards,
>>>> Amos
>>>> _______________________________________________
>>>> Autotest mailing list
>>>> Autotest@test.kernel.org
>>>> http://test.kernel.org/cgi-bin/mailman/listinfo/autotest
>>>>
>>>
>>>
>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe kvm" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

Re: Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[Amos Kong]

On Fri, Apr 16, 2010 at 08:03:06AM -0600, David S. Ahern wrote:
> 
> 
> On 04/14/2010 08:01 AM, Lucas Meneghel Rodrigues wrote:
> > On Wed, Apr 14, 2010 at 10:26 AM, Amos Kong <akong@redhat.com> wrote:
> >> Hi Lucas,
> >>
> >> When I execute unattended_install testcases on RHEL-5.5, it always fail when using rhel3.9-32 guest.
> >> I found it blocked after packages installation. Is it related that rhel39-32 guest don't support acpi ?
> > 
> > I've hit this problem before, it is what I believe to be an anaconda
> > bug on that particular RHEL version. I tried a *lot* to work around
> > the problem, spent a lot of time with it, but in the end I just gave
> > up.
> > 
> > The problem happens because it's simply not possible to bring the
> > network up at post install stage so the install can communicate with
> > the host to respond that its installation finished. If anyone can help
> > to work around the problem that'd be great...
> 
> What commands are you running to configure the network and what command
> is stalling? I've done unattended installs with RHEL3.8, 32-bit guests
> with networking enabled.


Qemu Command Line:
# /root/autotest/client/tests/kvm/qemu -name 'vm1' -monitor
tcp:0:6001,server,nowait -drive
file=/root/autotest/client/tests/kvm/images/RHEL-3.9-32.raw,if=ide,cache=writethrough,boot=on
-net nic,vlan=0,model=e1000,macaddr=00:11:22:33:50:01 -net user,vlan=0 -m 33792
-smp 12 -drive
file=/root/autotest/client/tests/kvm/isos/linux/RHEL3.9-i386-DVD.iso,index=2,media=cdrom
-soundhw ac97 -fda /root/autotest/client/tests/kvm/images/floppy.img -tftp
/root/autotest/client/tests/kvm/images/tftpboot -usbdevice tablet -rtc-td-hack
-no-hpet -cpu qemu64,+sse2 -no-kvm-pit-reinjection -bootp /pxelinux.0 -boot n
-redir tcp:5000::22 -redir tcp:5001::12323 -vnc :0    

----------------------

# cat RHEL-3-series.ks 
install
cdrom
text
reboot
lang en_US.UTF-8
langsupport --default=en_US.UTF-8 en_US.UTF-9
keyboard us
network --bootproto dhcp
r-ootpw 123456
firewall --enabled --ssh
timezone America/New_York
firstboot --disable
bootloader --location=mbr
clearpart --all --initlabel
autopart
reboot
mouse generic3ps/2
skipx

%packages --resolvedeps
@ base
@ development-libs
@ development-tools

%post --interpreter /usr/bin/python
import socket, os
os.system('dhclient')
os.system('chkconfig sshd on')
os.system('iptables -F')
os.system('echo 0 > /selinux/enforce')
server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server.bind(('', 12323))
server.listen(1)
(client, addr) = server.accept()
client.send("done")
client.close()


> 
> David

Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[David S. Ahern]

On 04/17/2010 10:09 PM, Amos Kong wrote:
> %post --interpreter /usr/bin/python
> import socket, os
> os.system('dhclient')
> os.system('chkconfig sshd on')
> os.system('iptables -F')
> os.system('echo 0 > /selinux/enforce')
> server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
> server.bind(('', 12323))
> server.listen(1)
> (client, addr) = server.accept()
> client.send("done")
> client.close()

So, effectively after the install completes use dhclient to configure a
network address, start a server on a known port and when a client
connects send the message "done". I would expect that to work just fine.

What part is not working? Have you used anaconda's root shell (alt-f2)
to confirm each step and if so which one is not setup as expected?

David

Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[Lucas Meneghel Rodrigues]

On Sat, 2010-04-17 at 22:55 -0600, David S. Ahern wrote:
> 
> On 04/17/2010 10:09 PM, Amos Kong wrote:
> > %post --interpreter /usr/bin/python
> > import socket, os
> > os.system('dhclient')
> > os.system('chkconfig sshd on')
> > os.system('iptables -F')
> > os.system('echo 0 > /selinux/enforce')
> > server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
> > server.bind(('', 12323))
> > server.listen(1)
> > (client, addr) = server.accept()
> > client.send("done")
> > client.close()
> 
> So, effectively after the install completes use dhclient to configure a
> network address, start a server on a known port and when a client
> connects send the message "done". I would expect that to work just fine.

Me too, it has been working for RHEL 4.X, 5.X 32/64 bit and 3.X 64 bit.
The problem has been effectively 3.9 32 bit.

> What part is not working? Have you used anaconda's root shell (alt-f2)
> to confirm each step and if so which one is not setup as expected?

dhclient. It fails saying "module IP_... could not be loaded.

> David
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[David S. Ahern]

On 04/18/2010 12:26 PM, Lucas Meneghel Rodrigues wrote:
> On Sat, 2010-04-17 at 22:55 -0600, David S. Ahern wrote:
>>
>> On 04/17/2010 10:09 PM, Amos Kong wrote:
>>> %post --interpreter /usr/bin/python
>>> import socket, os
>>> os.system('dhclient')
>>> os.system('chkconfig sshd on')
>>> os.system('iptables -F')
>>> os.system('echo 0 > /selinux/enforce')
>>> server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
>>> server.bind(('', 12323))
>>> server.listen(1)
>>> (client, addr) = server.accept()
>>> client.send("done")
>>> client.close()
>>
>> So, effectively after the install completes use dhclient to configure a
>> network address, start a server on a known port and when a client
>> connects send the message "done". I would expect that to work just fine.
> 
> Me too, it has been working for RHEL 4.X, 5.X 32/64 bit and 3.X 64 bit.
> The problem has been effectively 3.9 32 bit.

I fired up a 3.9 guest with your ks.cfg. The problem is due to the
limited functionality in the RHEL3 BOOT kernel for i386. Specifically,
dhclient is failing at:

setsockopt(6, SOL_SOCKET, SO_ATTACH_FILTER, "\v\0\6\10\240Y\n\10", 8) =
-1 ENOPROTOOPT

So dhclient client is out. But you can still configure and use
networking via ifconfig if static addressing is an option for you. I was
able to use that command to configure eth0 and push an strace output
file for dhclient.

Also, a couple of comments on this use case:
- SELinux is not applicable
- 32 GB of RAM is way beyond what the RHEL3 i386 can detect and use
- 12 vcpus seems high as well.

David


> 
>> What part is not working? Have you used anaconda's root shell (alt-f2)
>> to confirm each step and if so which one is not setup as expected?
> 
> dhclient. It fails saying "module IP_... could not be loaded.
> 
>> David
>> --
>> To unsubscribe from this list: send the line "unsubscribe kvm" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 

Re: [Autotest] Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[Lucas Meneghel Rodrigues]

On Sun, 2010-04-18 at 21:32 -0600, David S. Ahern wrote:
> On 04/18/2010 12:26 PM, Lucas Meneghel Rodrigues wrote:
> > On Sat, 2010-04-17 at 22:55 -0600, David S. Ahern wrote:
> >>
> >> On 04/17/2010 10:09 PM, Amos Kong wrote:
> >>> %post --interpreter /usr/bin/python
> >>> import socket, os
> >>> os.system('dhclient')
> >>> os.system('chkconfig sshd on')
> >>> os.system('iptables -F')
> >>> os.system('echo 0 > /selinux/enforce')
> >>> server = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
> >>> server.bind(('', 12323))
> >>> server.listen(1)
> >>> (client, addr) = server.accept()
> >>> client.send("done")
> >>> client.close()
> >>
> >> So, effectively after the install completes use dhclient to configure a
> >> network address, start a server on a known port and when a client
> >> connects send the message "done". I would expect that to work just fine.
> > 
> > Me too, it has been working for RHEL 4.X, 5.X 32/64 bit and 3.X 64 bit.
> > The problem has been effectively 3.9 32 bit.
> 
> I fired up a 3.9 guest with your ks.cfg. The problem is due to the
> limited functionality in the RHEL3 BOOT kernel for i386. Specifically,
> dhclient is failing at:
> 
> setsockopt(6, SOL_SOCKET, SO_ATTACH_FILTER, "\v\0\6\10\240Y\n\10", 8) =
> -1 ENOPROTOOPT
> 
> So dhclient client is out. But you can still configure and use
> networking via ifconfig if static addressing is an option for you. I was
> able to use that command to configure eth0 and push an strace output
> file for dhclient.
> 
> Also, a couple of comments on this use case:
> - SELinux is not applicable
> - 32 GB of RAM is way beyond what the RHEL3 i386 can detect and use
> - 12 vcpus seems high as well.

Problem resolved :) Yay!

http://autotest.kernel.org/changeset/4432

Thank you very much David,

Autotest: Unattended_install testcase always fail with rhel3.9-32 guest

[Amos Kong]

Hi Lucas,

When I execute unattended_install testcases on RHEL-5.5, it always fail when using rhel3.9-32 guest.
I found it blocked after packages installation. Is it related that rhel39-32 guest don't support acpi ?


Regards,
Amos