From: Gleb Natapov <gleb@redhat.com>
To: avi@redhat.com, mtosatti@redhat.com
Cc: kvm@vger.kernel.org
Subject: [PATCHv2 21/23] KVM: x86 exmulator: handle shadowed registers outside emulator.
Date: Wed, 28 Apr 2010 19:15:42 +0300 [thread overview]
Message-ID: <1272471344-7076-22-git-send-email-gleb@redhat.com> (raw)
In-Reply-To: <1272471344-7076-1-git-send-email-gleb@redhat.com>
Emulator shouldn't access vcpu directly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
---
arch/x86/kvm/emulate.c | 15 ---------------
arch/x86/kvm/x86.c | 16 +++++++++++++---
2 files changed, 13 insertions(+), 18 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 5d786d5..4cc8368 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -941,12 +941,9 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
/* we cannot decode insn before we complete previous rep insn */
WARN_ON(ctxt->restart);
- /* Shadow copy of register state. Committed on successful emulation. */
- memset(c, 0, sizeof(struct decode_cache));
c->eip = ctxt->eip;
c->fetch.start = c->fetch.end = c->eip;
ctxt->cs_base = seg_base(ctxt, ops, VCPU_SREG_CS);
- memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
switch (mode) {
case X86EMUL_MODE_REAL:
@@ -2486,16 +2483,13 @@ int emulator_task_switch(struct x86_emulate_ctxt *ctxt,
struct decode_cache *c = &ctxt->decode;
int rc;
- memset(c, 0, sizeof(struct decode_cache));
c->eip = ctxt->eip;
- memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
c->dst.type = OP_NONE;
rc = emulator_do_task_switch(ctxt, ops, tss_selector, reason,
has_error_code, error_code);
if (rc == X86EMUL_CONTINUE) {
- memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
rc = writeback(ctxt, ops);
if (rc == X86EMUL_CONTINUE)
ctxt->eip = c->eip;
@@ -2525,13 +2519,6 @@ x86_emulate_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
ctxt->interruptibility = 0;
ctxt->decode.mem_read.pos = 0;
- /* Shadow copy of register state. Committed on successful emulation.
- * NOTE: we can copy them from vcpu as x86_decode_insn() doesn't
- * modify them.
- */
-
- memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
-
if (ctxt->mode == X86EMUL_MODE_PROT64 && (c->d & No64)) {
kvm_queue_exception(ctxt->vcpu, UD_VECTOR);
goto done;
@@ -3031,8 +3018,6 @@ writeback:
* without decoding
*/
ctxt->decode.mem_read.end = 0;
- /* Commit shadow register state. */
- memcpy(ctxt->vcpu->arch.regs, c->regs, sizeof c->regs);
ctxt->eip = c->eip;
done:
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 344d9dd..5fda84e 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -3782,7 +3782,7 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
int emulation_type)
{
int r, shadow_mask;
- struct decode_cache *c;
+ struct decode_cache *c = &vcpu->arch.emulate_ctxt.decode;
kvm_clear_exception_queue(vcpu);
vcpu->arch.mmio_fault_cr2 = cr2;
@@ -3807,13 +3807,14 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
? X86EMUL_MODE_VM86 : cs_l
? X86EMUL_MODE_PROT64 : cs_db
? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
+ memset(c, 0, sizeof(struct decode_cache));
+ memcpy(c->regs, vcpu->arch.regs, sizeof c->regs);
r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
trace_kvm_emulate_insn_start(vcpu);
/* Only allow emulation of specific instructions on #UD
* (namely VMMCALL, sysenter, sysexit, syscall)*/
- c = &vcpu->arch.emulate_ctxt.decode;
if (emulation_type & EMULTYPE_TRAP_UD) {
if (!c->twobyte)
return EMULATE_FAIL;
@@ -3854,6 +3855,10 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
return EMULATE_DONE;
}
+ /* this is needed for vmware backdor interface to work since it
+ changes registers values during IO operation */
+ memcpy(c->regs, vcpu->arch.regs, sizeof c->regs);
+
restart:
r = x86_emulate_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
@@ -3874,6 +3879,7 @@ restart:
shadow_mask = vcpu->arch.emulate_ctxt.interruptibility;
kvm_x86_ops->set_interrupt_shadow(vcpu, shadow_mask);
kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
+ memcpy(vcpu->arch.regs, c->regs, sizeof c->regs);
kvm_rip_write(vcpu, vcpu->arch.emulate_ctxt.eip);
if (vcpu->arch.pio.count) {
@@ -4857,6 +4863,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
bool has_error_code, u32 error_code)
{
+ struct decode_cache *c = &vcpu->arch.emulate_ctxt.decode;
int cs_db, cs_l, ret;
cache_all_regs(vcpu);
@@ -4871,6 +4878,8 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
? X86EMUL_MODE_VM86 : cs_l
? X86EMUL_MODE_PROT64 : cs_db
? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
+ memset(c, 0, sizeof(struct decode_cache));
+ memcpy(c->regs, vcpu->arch.regs, sizeof c->regs);
ret = emulator_task_switch(&vcpu->arch.emulate_ctxt, &emulate_ops,
tss_selector, reason, has_error_code,
@@ -4878,7 +4887,8 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason,
if (ret)
return EMULATE_FAIL;
-
+
+ memcpy(vcpu->arch.regs, c->regs, sizeof c->regs);
kvm_rip_write(vcpu, vcpu->arch.emulate_ctxt.eip);
kvm_x86_ops->set_rflags(vcpu, vcpu->arch.emulate_ctxt.eflags);
return EMULATE_DONE;
--
1.6.5
next prev parent reply other threads:[~2010-04-28 16:15 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-28 16:15 [PATCHv2 00/23] next round of emulator cleanups Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 01/23] KVM: x86 emulator: introduce read cache Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 02/23] KVM: x86 emulator: fix Move r/m16 to segment register decoding Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 03/23] KVM: x86 emulator: cleanup xchg emulation Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 04/23] KVM: x86 emulator: cleanup nop emulation Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 05/23] KVM: x86 emulator: handle "far address" source operand Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 06/23] KVM: x86 emulator: add (set|get)_dr callbacks to x86_emulate_ops Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 07/23] KVM: x86 emulator: add (set|get)_msr " Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 08/23] KVM: x86 emulator: add get_cached_segment_base() callback " Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 09/23] KVM: x86 emulator: cleanup some direct calls into kvm to use existing callbacks Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 10/23] KVM: x86 emulator: make set_cr() callback return error if it fails Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 11/23] KVM: x86 emulator: make (get|set)_dr() " Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 12/23] KVM: x86 emulator: fix X86EMUL_RETRY_INSTR and X86EMUL_CMPXCHG_FAILED values Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 13/23] KVM: fill in run->mmio details in (read|write)_emulated function Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 14/23] KVM: x86 emulator: x86_emulate_insn() return -1 only in case of emulation failure Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 15/23] KVM: remove export of emulator_write_emulated() Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 16/23] KVM: do not inject #PF in (read|write)_emulated() callbacks Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 17/23] KVM: handle emulation failure case first Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 18/23] KVM: x86 emulator: advance RIP outside x86 emulator code Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 19/23] KVM: x86 emulator: set RFLAGS " Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 20/23] KVM: x86 emulator: use shadowed register in emulate_sysexit() Gleb Natapov
2010-04-28 16:15 ` Gleb Natapov [this message]
2010-04-28 16:15 ` [PATCHv2 22/23] KVM: x86 emulator: move interruptibility state tracking out of emulator Gleb Natapov
2010-04-28 16:15 ` [PATCHv2 23/23] KVM: x86 emulator: do not inject exception directly into vcpu Gleb Natapov
[not found] ` <446597.86519.qm@web55502.mail.re4.yahoo.com>
2010-04-29 10:17 ` qemu-kvm.0.12.2 aborts on linux Gleb Natapov
[not found] ` <792291.45224.qm@web55507.mail.re4.yahoo.com>
2010-05-02 5:23 ` Gleb Natapov
[not found] ` <710443.70603.qm@web55504.mail.re4.yahoo.com>
2010-05-03 7:44 ` Gleb Natapov
2010-04-29 9:26 ` [PATCHv2 00/23] next round of emulator cleanups Avi Kivity
2010-05-05 7:57 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1272471344-7076-22-git-send-email-gleb@redhat.com \
--to=gleb@redhat.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox