From: Avi Kivity <avi@redhat.com>
To: Marcelo Tosatti <mtosatti@redhat.com>,
Glauber Costa <glommer@redhat.com>
Cc: kvm@vger.kernel.org
Subject: [PATCH 5/5] Use upstream's kvm_arch_init_vcpu()'s cpuid bits
Date: Tue, 1 Jun 2010 15:33:47 +0300 [thread overview]
Message-ID: <1275395627-2321-6-git-send-email-avi@redhat.com> (raw)
In-Reply-To: <1275395627-2321-1-git-send-email-avi@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
---
qemu-kvm-x86.c | 104 -----------------------------------------------------
target-i386/kvm.c | 8 +---
2 files changed, 2 insertions(+), 110 deletions(-)
diff --git a/qemu-kvm-x86.c b/qemu-kvm-x86.c
index 853d50e..3c33e64 100644
--- a/qemu-kvm-x86.c
+++ b/qemu-kvm-x86.c
@@ -1101,114 +1101,10 @@ void kvm_arch_save_regs(CPUState *env)
kvm_get_debugregs(env);
}
-static void do_cpuid_ent(struct kvm_cpuid_entry2 *e, uint32_t function,
- uint32_t count, CPUState *env)
-{
- env->regs[R_EAX] = function;
- env->regs[R_ECX] = count;
- qemu_kvm_cpuid_on_env(env);
- e->function = function;
- e->flags = 0;
- e->index = 0;
- e->eax = env->regs[R_EAX];
- e->ebx = env->regs[R_EBX];
- e->ecx = env->regs[R_ECX];
- e->edx = env->regs[R_EDX];
-}
-
-static void kvm_trim_features(uint32_t *features, uint32_t supported)
-{
- int i;
- uint32_t mask;
-
- for (i = 0; i < 32; ++i) {
- mask = 1U << i;
- if ((*features & mask) && !(supported & mask)) {
- *features &= ~mask;
- }
- }
-}
-
static int _kvm_arch_init_vcpu(CPUState *env)
{
- struct kvm_cpuid_entry2 cpuid_ent[100];
-#ifdef KVM_CPUID_SIGNATURE
- struct kvm_cpuid_entry2 *pv_ent;
- uint32_t signature[3];
-#endif
- int cpuid_nent = 0;
- CPUState copy;
- uint32_t i, j, limit;
-
kvm_arch_reset_vcpu(env);
-#ifdef KVM_CPUID_SIGNATURE
- /* Paravirtualization CPUIDs */
- memcpy(signature, "KVMKVMKVM\0\0\0", 12);
- pv_ent = &cpuid_ent[cpuid_nent++];
- memset(pv_ent, 0, sizeof(*pv_ent));
- pv_ent->function = KVM_CPUID_SIGNATURE;
- pv_ent->eax = 0;
- pv_ent->ebx = signature[0];
- pv_ent->ecx = signature[1];
- pv_ent->edx = signature[2];
-
- pv_ent = &cpuid_ent[cpuid_nent++];
- memset(pv_ent, 0, sizeof(*pv_ent));
- pv_ent->function = KVM_CPUID_FEATURES;
- pv_ent->eax = get_para_features(env);
-#endif
-
- kvm_trim_features(&env->cpuid_features,
- kvm_arch_get_supported_cpuid(env, 1, R_EDX));
-
- /* prevent the hypervisor bit from being cleared by the kernel */
- i = env->cpuid_ext_features & CPUID_EXT_HYPERVISOR;
- kvm_trim_features(&env->cpuid_ext_features,
- kvm_arch_get_supported_cpuid(env, 1, R_ECX));
- env->cpuid_ext_features |= i;
-
- kvm_trim_features(&env->cpuid_ext2_features,
- kvm_arch_get_supported_cpuid(env, 0x80000001, R_EDX));
- kvm_trim_features(&env->cpuid_ext3_features,
- kvm_arch_get_supported_cpuid(env, 0x80000001, R_ECX));
-
- copy = *env;
-
- copy.regs[R_EAX] = 0;
- qemu_kvm_cpuid_on_env(©);
- limit = copy.regs[R_EAX];
-
- for (i = 0; i <= limit; ++i) {
- if (i == 4 || i == 0xb || i == 0xd) {
- for (j = 0; ; ++j) {
- do_cpuid_ent(&cpuid_ent[cpuid_nent], i, j, ©);
-
- cpuid_ent[cpuid_nent].flags = KVM_CPUID_FLAG_SIGNIFCANT_INDEX;
- cpuid_ent[cpuid_nent].index = j;
-
- cpuid_nent++;
-
- if (i == 4 && copy.regs[R_EAX] == 0)
- break;
- if (i == 0xb && !(copy.regs[R_ECX] & 0xff00))
- break;
- if (i == 0xd && copy.regs[R_EAX] == 0)
- break;
- }
- } else
- do_cpuid_ent(&cpuid_ent[cpuid_nent++], i, 0, ©);
- }
-
- copy.regs[R_EAX] = 0x80000000;
- qemu_kvm_cpuid_on_env(©);
- limit = copy.regs[R_EAX];
-
- for (i = 0x80000000; i <= limit; ++i)
- do_cpuid_ent(&cpuid_ent[cpuid_nent++], i, 0, ©);
-
- kvm_setup_cpuid2(env, cpuid_nent, cpuid_ent);
-
#ifdef KVM_CAP_MCE
if (((env->cpuid_version >> 8)&0xF) >= 6
&& (env->cpuid_features&(CPUID_MCE|CPUID_MCA)) == (CPUID_MCE|CPUID_MCA)
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 8db6d54..9cb9cf4 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -168,8 +168,6 @@ static int _kvm_arch_init_vcpu(CPUState *env);
int kvm_arch_init_vcpu(CPUState *env)
{
int r;
-#ifdef KVM_UPSTREAM
-
struct {
struct kvm_cpuid2 cpuid;
struct kvm_cpuid_entry2 entries[100];
@@ -181,8 +179,6 @@ int kvm_arch_init_vcpu(CPUState *env)
uint32_t signature[3];
#endif
-#endif
-
r = _kvm_arch_init_vcpu(env);
if (r < 0) {
return r;
@@ -192,6 +188,8 @@ int kvm_arch_init_vcpu(CPUState *env)
env->mp_state = KVM_MP_STATE_RUNNABLE;
+#endif
+
env->cpuid_features &= kvm_arch_get_supported_cpuid(env, 1, R_EDX);
i = env->cpuid_ext_features & CPUID_EXT_HYPERVISOR;
@@ -285,8 +283,6 @@ int kvm_arch_init_vcpu(CPUState *env)
cpuid_data.cpuid.nent = cpuid_i;
return kvm_vcpu_ioctl(env, KVM_SET_CPUID2, &cpuid_data);
-#endif
- return 0;
}
void kvm_arch_reset_vcpu(CPUState *env)
--
1.7.1
next prev parent reply other threads:[~2010-06-01 12:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-01 12:33 [PATCH 0/5] Use more cpuid bits from upstream Avi Kivity
2010-06-01 12:33 ` [PATCH 1/5] Make get_para_features() similar to upstream Avi Kivity
2010-06-01 14:26 ` Glauber Costa
2010-06-01 12:33 ` [PATCH 2/5] Use get_para_features() from upstream Avi Kivity
2010-06-01 14:26 ` Glauber Costa
2010-06-01 12:33 ` [PATCH 3/5] Rename kvm_arch_vcpu_init()s cenv argument to env Avi Kivity
2010-06-01 14:27 ` Glauber Costa
2010-06-01 12:33 ` [PATCH 4/5] Use skeleton of upstream's kvm_arch_init_vcpu() Avi Kivity
2010-06-01 14:29 ` Glauber Costa
2010-06-01 12:33 ` Avi Kivity [this message]
2010-06-01 14:51 ` [PATCH 5/5] Use upstream's kvm_arch_init_vcpu()'s cpuid bits Glauber Costa
2010-06-02 16:23 ` [PATCH 0/5] Use more cpuid bits from upstream Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1275395627-2321-6-git-send-email-avi@redhat.com \
--to=avi@redhat.com \
--cc=glommer@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).