From: Mohammed Gamal <m.gamal005@gmail.com>
To: avi@redhat.com
Cc: kvm@vger.kernel.org, mtosatti@redhat.com,
Mohammed Gamal <m.gamal005@gmail.com>
Subject: [PATCH] x86 emulator: Add IRET instruction
Date: Wed, 28 Jul 2010 02:06:41 +0300 [thread overview]
Message-ID: <1280272001-1415-1-git-send-email-m.gamal005@gmail.com> (raw)
Ths patch adds IRET instruction (opcode 0xcf).
Currently, only IRET in real mode is emulated. Protected mode support is to be added later if needed.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com>
----
Changes from v1:
- Corrected handling of eflags
---
arch/x86/kvm/emulate.c | 69 ++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 69 insertions(+), 0 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index b38bd8b..e45fd28 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -1778,6 +1778,69 @@ static int emulate_popa(struct x86_emulate_ctxt *ctxt,
return rc;
}
+static int emulate_iret_real(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops *ops)
+{
+ struct decode_cache *c = &ctxt->decode;
+ int rc = X86EMUL_CONTINUE;
+ unsigned long temp_eip = 0;
+ unsigned long temp_eflags = 0;
+ unsigned long mask = EFLG_CF | EFLG_PF | EFLG_AF | EFLG_ZF | EFLG_SF | EFLG_TF |
+ EFLG_IF | EFLG_DF | EFLG_OF | EFLG_IOPL | EFLG_NT | EFLG_RF |
+ EFLG_AC | EFLG_ID | (1 << 1); /* Last one is the reserved bit */
+ unsigned long vm86_mask = EFLG_VM | EFLG_VIF | EFLG_VIP;
+
+ /* TODO: Add stack limit check */
+
+ rc = emulate_pop(ctxt, ops, &temp_eip, c->op_bytes);
+
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
+
+ if (temp_eip & ~0xffff) {
+ emulate_gp(ctxt, 0);
+ return X86EMUL_PROPAGATE_FAULT;
+ }
+
+ c->eip = temp_eip;
+
+ rc = emulate_pop_sreg(ctxt, ops, VCPU_SREG_CS);
+
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
+
+ rc = emulate_pop(ctxt, ops, &temp_eflags, c->op_bytes);
+
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
+
+ if (c->op_bytes == 4) {
+ temp_eflags = ((temp_eflags & mask) | (ctxt->eflags & vm86_mask));
+ ctxt->eflags = temp_eflags;
+ } else if (c->op_bytes == 2) {
+ temp_eflags &= ~0xfffd; /* Do not clear reserved bit 1 */
+ ctxt->eflags |= temp_eflags;
+ }
+
+ return rc;
+}
+
+static inline int emulate_iret(struct x86_emulate_ctxt *ctxt,
+ struct x86_emulate_ops* ops)
+{
+ switch(ctxt->mode) {
+ case X86EMUL_MODE_REAL:
+ return emulate_iret_real(ctxt, ops);
+ case X86EMUL_MODE_VM86:
+ case X86EMUL_MODE_PROT16:
+ case X86EMUL_MODE_PROT32:
+ case X86EMUL_MODE_PROT64:
+ default:
+ /* iret from protected mode unimplemented yet */
+ return X86EMUL_UNHANDLEABLE;
+ }
+}
+
static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
struct x86_emulate_ops *ops)
{
@@ -2910,6 +2973,12 @@ special_insn:
if (rc != X86EMUL_CONTINUE)
goto done;
break;
+ case 0xcf: /* iret */
+ rc = emulate_iret(ctxt, ops);
+
+ if (rc != X86EMUL_CONTINUE)
+ goto done;
+ break;
case 0xd0 ... 0xd1: /* Grp2 */
c->src.val = 1;
emulate_grp2(ctxt);
--
1.7.0.4
next reply other threads:[~2010-07-27 23:06 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-27 23:06 Mohammed Gamal [this message]
2010-07-28 4:20 ` [PATCH] x86 emulator: Add IRET instruction Avi Kivity
-- strict thread matches above, loose matches on Subject: below --
2010-07-28 9:38 Mohammed Gamal
2010-07-28 10:30 ` Avi Kivity
2010-07-28 13:30 ` Paolo Bonzini
2010-07-28 13:49 ` Paolo Bonzini
2010-07-28 17:15 ` Marcelo Tosatti
2010-07-25 19:20 Mohammed Gamal
2010-07-25 23:59 ` Paolo Bonzini
2010-07-26 0:07 ` Mohammed Gamal
2010-07-26 3:09 ` Wei Yongjun
2010-07-26 8:47 ` Paolo Bonzini
2010-07-26 9:00 ` Avi Kivity
2010-07-26 9:31 ` Paolo Bonzini
2010-07-26 9:32 ` Paolo Bonzini
2010-07-26 11:38 ` Avi Kivity
2010-07-25 19:18 Mohammed Gamal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1280272001-1415-1-git-send-email-m.gamal005@gmail.com \
--to=m.gamal005@gmail.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox