* Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM)
@ 2011-02-15 20:57 Da Powah
2011-02-16 23:24 ` Alex Williamson
0 siblings, 1 reply; 7+ messages in thread
From: Da Powah @ 2011-02-15 20:57 UTC (permalink / raw)
To: kvm
Hi,
i`ve got a question about pci passthrogh of 2 pci devices (2x DVB-S2 PCI cards with Saa7146 PCI Bridge from Technotrend: S2-3200).
I am using squeeze with a 2.6.37 selfcompiled Kernel. I want to passthrough both devices to a virtual machine (Win7) an get problems. If i passthrough one device (other is unplugged) it works flawlessly.
The time i add both devices and pass them through i am still able to start the VM and i don`t see anything in the error logs. Even Windows7 or XP detects both cards and installs the driver correctly (actual BDA Driver, standard broadcast video driver). But the time i want to acces the cards, i get a BSOD - caused by the driver.
I already aligned the io memory of both devices, checked the libvirt logs, kernel and syslogs - there is nothing for a kvm newbe that seems to be odd. The kernel is compiled with all the mentioned kernel options of the linux-kvm.org page - except that i compiled the stub driver as module. One card alone (both tried separately) is working w/o any flaws. Kvm is able to pass through all devices behind a PCI Bridge - so take a look at the 03:0x.0 devices below: i use those 2 sat boards only in 3 PCI slots.
What am i able to do to make deeper analysis or to solve the problem ?
Kind regards,
DP
Some more words about my system for analysis... i am using following hardware configuration:
Corei5 660, Intel DH55HC MoBo, 8GB RAM, and some other stuff:
lspci:
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:16.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset PT IDER Controller (rev 06)
00:16.3 Serial controller: Intel Corporation 5 Series/3400 Series Chipset KT Controller (rev 06)
00:19.0 Ethernet controller: Intel Corporation 82578DC Gigabit Network Connection (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
02:00.0 SCSI storage controller: HighPoint Technologies, Inc. RocketRAID 230x 4 Port SATA-II Controller (rev 02)
03:01.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
03:02.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
0: 634 0 0 0 IO-APIC-edge timer
1: 2 0 0 0 IO-APIC-edge i8042
8: 1 0 0 0 IO-APIC-edge rtc0
9: 0 0 0 0 IO-APIC-fasteoi acpi
12: 4 0 0 0 IO-APIC-edge i8042
16: 5278306 0 0 0 IO-APIC-fasteoi sata_mv, ehci_hcd:usb1
17: 34 0 0 0 IO-APIC-fasteoi
23: 28 0 0 0 IO-APIC-fasteoi ehci_hcd:usb2
40: 0 0 0 0 DMAR_MSI-edge dmar1
41: 0 0 0 0 PCI-MSI-edge PCIe PME
42: 0 0 0 0 PCI-MSI-edge PCIe PME
43: 1474239 0 0 0 PCI-MSI-edge eth1
44: 2112869 0 0 0 PCI-MSI-edge eth0-rx-0
45: 2270012 0 0 0 PCI-MSI-edge eth0-tx-0
46: 5 0 0 0 PCI-MSI-edge eth0
47: 2490536 0 0 0 PCI-MSI-edge ahci
48: 304042 0 0 0 PCI-MSI-edge i915
NMI: 0 0 0 0 Non-maskable interrupts
LOC: 37955398 49939470 184796903 138493134 Local timer interrupts
SPU: 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 Performance monitoring interrupts
IWI: 0 0 0 0 IRQ work interrupts
RES: 835731 939518 1871340 1916898 Rescheduling interrupts
CAL: 198176 207399 689573 583456 Function call interrupts
TLB: 234222 336639 208981 107614 TLB shootdowns
TRM: 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 Machine check exceptions
MCP: 595 595 595 595 Machine check polls
ERR: 3
MIS: 0
cat /proc/dma
4: cascade
cat /proc/cpu
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 37
model name : Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz
stepping : 2
cpu MHz : 1197.000
cache size : 4096 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 2
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 11
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt aes lahf_lm ida arat dts tpr_shadow vnmi flexpriority ept vpid
bogomips : 6649.83
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
virsh xml dump:
virsh # dumpxml win7vm
<domain type='kvm'>
<name>win7vm</name>
<uuid>9d435720-517c-8263-ebc3-759337d5b48b</uuid>
<memory>4166656</memory>
<currentMemory>4166656</currentMemory>
<vcpu cpuset='2-3'>2</vcpu>
<os>
<type arch='x86_64' machine='pc-0.12'>hvm</type>
<boot dev='hd'/>
</os>
<features>
<acpi/>
<pae/>
</features>
<clock offset='localtime'/>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<devices>
<emulator>/usr/bin/kvm</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='raw'/>
<source file='/var/lib/libvirt/images/win7vm.img'/>
<target dev='hda' bus='ide'/>
<address type='drive' controller='0' bus='0' unit='0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<target dev='hdc' bus='ide'/>
<readonly/>
<address type='drive' controller='0' bus='1' unit='0'/>
</disk>
<controller type='ide' index='0'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
</controller>
<interface type='bridge'>
<mac address='52:54:00:ce:99:5b'/>
<source bridge='intern'/>
<target dev='vnet3'/>
<model type='e1000'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
</interface>
<serial type='pty'>
<target port='0'/>
</serial>
<console type='pty'>
<target type='serial' port='0'/>
</console>
<input type='tablet' bus='usb'/>
<input type='mouse' bus='ps2'/>
<graphics type='vnc' port='-1' autoport='yes' listen='127.0.0.1'/>
<sound model='ac97'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
</sound>
<video>
<model type='vga' vram='9216' heads='1'/>
<address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
</video>
<hostdev mode='subsystem' type='pci' managed='yes'>
<source>
<address domain='0x0000' bus='0x03' slot='0x01' function='0x0'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
</hostdev>
<hostdev mode='subsystem' type='pci' managed='yes'>
<source>
<address domain='0x0000' bus='0x03' slot='0x02' function='0x0'/>
</source>
<address type='pci' domain='0x0000' bus='0x00' slot='0x07' function='0x0'/>
</hostdev>
<memballoon model='virtio'>
<address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/>
</memballoon>
</devices>
</domain>
log entry of qemu after booting:
LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin HOME=/root USER=root LOGNAME=root QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 4069 -smp 2,sockets=2,cores=1,threads=1 -name win7vm -uuid 9d435720-517c-8263-ebc3-759337d5b48b -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/win7vm.monitor,server,nowait -mon chardev=monitor,mode=readline -rtc base=localtime -boot c -drive file=/var/lib/libvirt/images/win7vm.img,if=none,id=drive-ide0-0-0,boot=on,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -device e1000,vlan=0,id=net0,mac=52:54:00:ce:99:5b,bus=pci.0,addr=0x3 -net tap,fd=39,vlan=0,name=hostnet0 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -device usb-tablet,id=input0 -vnc 127.0.0.1:3 -vga std -device AC97,id=sound0,bus=pci.0,addr=0x4 -device pci-assign,host=03:01.0,id=hostdev0,bus=pci.0,addr=0x6 -device pci-assign,host=03:02.0,id=hostdev1,bus=pci.0,addr=0x7 -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5
char device redirected to /dev/pts/1
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.37-p0wah (root@intern) (gcc version 4.4.5 (Debian 4.4.5-8) ) #2 SMP Tue Feb 8 18:58:14 CET 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.37-p0wah root=/dev/mapper/server3-root ro quiet intel_iommu=on intel_iommu=igfx_off pci=resource_alignment=03:00.0;03:02.0;03:01.0
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000092c00 (usable)
[ 0.000000] BIOS-e820: 0000000000092c00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cb442000 (usable)
[ 0.000000] BIOS-e820: 00000000cb442000 - 00000000cb485000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cb485000 - 00000000cb4f9000 (reserved)
[ 0.000000] BIOS-e820: 00000000cb4f9000 - 00000000cb50d000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cb50d000 - 00000000cb613000 (reserved)
[ 0.000000] BIOS-e820: 00000000cb613000 - 00000000cb614000 (usable)
[ 0.000000] BIOS-e820: 00000000cb614000 - 00000000cb615000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cb615000 - 00000000cb61d000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cb61d000 - 00000000cb61e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cb61e000 - 00000000cb620000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cb620000 - 00000000cb628000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cb628000 - 00000000cb649000 (reserved)
[ 0.000000] BIOS-e820: 00000000cb649000 - 00000000cb68c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cb68c000 - 00000000cb800000 (usable)
[ 0.000000] BIOS-e820: 00000000cdc00000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 00000001fc000000 (usable)
[ 0.000000] BIOS-e820: 00000001fc000000 - 0000000200000000 (reserved)
[ 0.000000] BIOS-e820: 0000000200000000 - 000000022c000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: DH55HC/Internal Server, BIOS TCIBX10H.86A.0044.2011.0120.1057 01/20/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x22c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 base 1FC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 22C000000 mask FFC000000 uncachable
[ 0.000000] 7 base 230000000 mask FF0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cc000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 00000001fc000000 - 0000000200000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcb800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcd30] fcd30
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cb800000
[ 0.000000] 0000000000 - 00cb800000 page 2M
[ 0.000000] kernel direct mapping tables up to cb800000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022c000000
[ 0.000000] 0100000000 - 022c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 22c000000 @ cb7f6000-cb800000
[ 0.000000] RAMDISK: 37450000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 INTEL)
[ 0.000000] ACPI: XSDT 00000000cb61ee18 0005C (v01 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: FACP 00000000cb61cd98 000F4 (v04 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20101013/tbfadt-369)
[ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xCB61DF40/0x00000000CB61DE40, using 32 (20101013/tbfadt-486)
[ 0.000000] ACPI: DSDT 00000000cb615018 06B88 (v01 INTEL DH55HC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cb61df40 00040
[ 0.000000] ACPI: APIC 00000000cb61cf18 000CC (v02 INTEL DH55HC 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000cb61cc18 00102 (v01 INTEL DH55HC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000cb61ff18 0003C (v01 INTEL DH55HC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cb61fe98 00038 (v01 INTEL DH55HC 01072009 AMI. 00000003)
[ 0.000000] ACPI: ASF! 00000000cb61ec18 000A0 (v32 INTEL DH55HC 00000001 TFSM 000F4240)
[ 0.000000] ACPI: DMAR 00000000cb61eb18 000A0 (v01 INTEL DH55HC 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022c000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000022c000000
[ 0.000000] NODE_DATA [00000001fbffb000 - 00000001fbffffff]
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff8801f3e00000-ffff8801faffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x00000092
[ 0.000000] 0: 0x00000100 -> 0x000cb442
[ 0.000000] 0: 0x000cb613 -> 0x000cb614
[ 0.000000] 0: 0x000cb68c -> 0x000cb800
[ 0.000000] 0: 0x00100000 -> 0x001fc000
[ 0.000000] 0: 0x00200000 -> 0x0022c000
[ 0.000000] On node 0 totalpages: 2045241
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 814575 pages, LIFO batch:31
[ 0.000000] Normal zone: 16800 pages used for memmap
[ 0.000000] Normal zone: 1195616 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000092000 - 0000000000093000
[ 0.000000] PM: Registered nosave memory: 0000000000093000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cb442000 - 00000000cb485000
[ 0.000000] PM: Registered nosave memory: 00000000cb485000 - 00000000cb4f9000
[ 0.000000] PM: Registered nosave memory: 00000000cb4f9000 - 00000000cb50d000
[ 0.000000] PM: Registered nosave memory: 00000000cb50d000 - 00000000cb613000
[ 0.000000] PM: Registered nosave memory: 00000000cb614000 - 00000000cb615000
[ 0.000000] PM: Registered nosave memory: 00000000cb615000 - 00000000cb61d000
[ 0.000000] PM: Registered nosave memory: 00000000cb61d000 - 00000000cb61e000
[ 0.000000] PM: Registered nosave memory: 00000000cb61e000 - 00000000cb620000
[ 0.000000] PM: Registered nosave memory: 00000000cb620000 - 00000000cb628000
[ 0.000000] PM: Registered nosave memory: 00000000cb628000 - 00000000cb649000
[ 0.000000] PM: Registered nosave memory: 00000000cb649000 - 00000000cb68c000
[ 0.000000] PM: Registered nosave memory: 00000000cb800000 - 00000000cdc00000
[ 0.000000] PM: Registered nosave memory: 00000000cdc00000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[ 0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 00000001fc000000 - 0000000200000000
[ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1ad1c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800cb000000 s82432 r8192 d24064 u131072
[ 0.000000] pcpu-alloc: s82432 r8192 d24064 u131072 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2014099
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.37-p0wah root=/dev/mapper/server3-root ro quiet intel_iommu=on intel_iommu=igfx_off pci=resource_alignment=03:00.0;03:02.0;03:01.0
[ 0.000000] Intel-IOMMU: enabled
[ 0.000000] Intel-IOMMU: disable GFX device mapping
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7976012k/9109504k available (3217k kernel code, 928540k absent, 204952k reserved, 3420k data, 612k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:808 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3324.778 MHz processor.
[ 0.000006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6649.55 BogoMIPS (lpj=13299112)
[ 0.000009] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000030] SELinux: Disabled at boot.
[ 0.000538] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002053] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002733] Mount-cache hash table entries: 256
[ 0.002848] Initializing cgroup subsys ns
[ 0.002851] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.002852] Initializing cgroup subsys cpuacct
[ 0.002857] Initializing cgroup subsys devices
[ 0.002859] Initializing cgroup subsys freezer
[ 0.002861] Initializing cgroup subsys net_cls
[ 0.002862] Initializing cgroup subsys blkio
[ 0.002888] CPU: Physical Processor ID: 0
[ 0.002889] CPU: Processor Core ID: 0
[ 0.002894] mce: CPU supports 9 MCE banks
[ 0.002903] CPU0: Thermal monitoring enabled (TM1)
[ 0.002910] using mwait in idle threads.
[ 0.002911] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.002916] ... version: 3
[ 0.002917] ... bit width: 48
[ 0.002918] ... generic registers: 4
[ 0.002919] ... value mask: 0000ffffffffffff
[ 0.002920] ... max period: 000000007fffffff
[ 0.002921] ... fixed-purpose events: 3
[ 0.002922] ... event mask: 000000070000000f
[ 0.003646] ACPI: Core revision 20101013
[ 0.010435] DMAR: Host address width 36
[ 0.010437] DMAR: DRHD base: 0x000000fed91000 flags: 0x0
[ 0.010443] IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c0000020230272 ecap 1000
[ 0.010445] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[ 0.010450] IOMMU 1: reg_base_addr fed93000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.010452] DMAR: RMRR base: 0x000000cb5fc000 end: 0x000000cb610fff
[ 0.010454] DMAR: RMRR base: 0x000000cdc00000 end: 0x000000cfffffff
[ 0.010456] DMAR: No ATSR found
[ 0.010586] Setting APIC routing to physical flat
[ 0.010981] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050537] CPU0: Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz stepping 02
[ 0.155087] Booting Node 0, Processors #1 #2 #3
[ 0.478038] Brought up 4 CPUs
[ 0.478041] Total of 4 processors activated (26599.06 BogoMIPS).
[ 0.479256] devtmpfs: initialized
[ 0.481978] regulator: core version 0.5
[ 0.482003] regulator: dummy:
[ 0.482033] NET: Registered protocol family 16
[ 0.482096] ACPI: bus type pci registered
[ 0.482169] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.482171] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.488324] PCI: Using configuration type 1 for base access
[ 0.488661] bio: create slab <bio-0> at 0
[ 0.489400] ACPI: EC: Look up EC in DSDT
[ 0.490201] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.493645] ACPI: SSDT 00000000cb614c18 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.493834] ACPI: Dynamic OEM Table Load:
[ 0.493836] ACPI: SSDT (null) 0038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.493880] ACPI Warning: Incorrect checksum in table [SSDT] - 0x3F, should be 0x1F (20101013/tbutils-314)
[ 0.493883] ACPI: SSDT 00000000cb61dd18 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.494029] ACPI: Dynamic OEM Table Load:
[ 0.494030] ACPI: SSDT (null) 00084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.494650] ACPI: Interpreter enabled
[ 0.494652] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.494666] ACPI: Using IOAPIC for interrupt routing
[ 0.494838] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.495681] ACPI Exception: AE_NOT_FOUND, Evaluating _PRW (20101013/scan-723)
[ 0.499056] ACPI: No dock devices found.
[ 0.499058] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.499207] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.499308] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.499310] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.499312] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.499313] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[ 0.499321] pci 0000:00:00.0: [8086:0040] type 0 class 0x000600
[ 0.499348] pci 0000:00:02.0: [8086:0042] type 0 class 0x000300
[ 0.499355] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
[ 0.499360] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.499363] pci 0000:00:02.0: reg 20: [io 0xf100-0xf107]
[ 0.499418] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
[ 0.499451] pci 0000:00:16.0: reg 10: [mem 0xfbc2a000-0xfbc2a00f 64bit]
[ 0.499541] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.499547] pci 0000:00:16.0: PME# disabled
[ 0.499570] pci 0000:00:16.2: [8086:3b66] type 0 class 0x000101
[ 0.499589] pci 0000:00:16.2: reg 10: [io 0xf0f0-0xf0f7]
[ 0.499599] pci 0000:00:16.2: reg 14: [io 0xf0e0-0xf0e3]
[ 0.499610] pci 0000:00:16.2: reg 18: [io 0xf0d0-0xf0d7]
[ 0.499621] pci 0000:00:16.2: reg 1c: [io 0xf0c0-0xf0c3]
[ 0.499633] pci 0000:00:16.2: reg 20: [io 0xf0b0-0xf0bf]
[ 0.499702] pci 0000:00:16.3: [8086:3b67] type 0 class 0x000700
[ 0.499725] pci 0000:00:16.3: reg 10: [io 0xf0a0-0xf0a7]
[ 0.499736] pci 0000:00:16.3: reg 14: [mem 0xfbc29000-0xfbc29fff]
[ 0.499836] pci 0000:00:19.0: [8086:10f0] type 0 class 0x000200
[ 0.499857] pci 0000:00:19.0: reg 10: [mem 0xfbc00000-0xfbc1ffff]
[ 0.499867] pci 0000:00:19.0: reg 14: [mem 0xfbc28000-0xfbc28fff]
[ 0.499877] pci 0000:00:19.0: reg 18: [io 0xf040-0xf05f]
[ 0.499936] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.499940] pci 0000:00:19.0: PME# disabled
[ 0.499966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.499986] pci 0000:00:1a.0: reg 10: [mem 0xfbc27000-0xfbc273ff]
[ 0.500063] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.500067] pci 0000:00:1a.0: PME# disabled
[ 0.500092] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.500110] pci 0000:00:1b.0: reg 10: [mem 0xfbc20000-0xfbc23fff 64bit]
[ 0.500177] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.500181] pci 0000:00:1b.0: PME# disabled
[ 0.500206] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.500276] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.500279] pci 0000:00:1c.0: PME# disabled
[ 0.500307] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604
[ 0.500376] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.500380] pci 0000:00:1c.4: PME# disabled
[ 0.500413] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.500435] pci 0000:00:1d.0: reg 10: [mem 0xfbc26000-0xfbc263ff]
[ 0.500513] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.500517] pci 0000:00:1d.0: PME# disabled
[ 0.500537] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.500604] pci 0000:00:1f.0: [8086:3b06] type 0 class 0x000601
[ 0.500710] pci 0000:00:1f.2: [8086:3b22] type 0 class 0x000106
[ 0.500734] pci 0000:00:1f.2: reg 10: [io 0xf090-0xf097]
[ 0.500743] pci 0000:00:1f.2: reg 14: [io 0xf080-0xf083]
[ 0.500753] pci 0000:00:1f.2: reg 18: [io 0xf070-0xf077]
[ 0.500762] pci 0000:00:1f.2: reg 1c: [io 0xf060-0xf063]
[ 0.500772] pci 0000:00:1f.2: reg 20: [io 0xf020-0xf03f]
[ 0.500781] pci 0000:00:1f.2: reg 24: [mem 0xfbc25000-0xfbc257ff]
[ 0.500824] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.500827] pci 0000:00:1f.2: PME# disabled
[ 0.500847] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.500865] pci 0000:00:1f.3: reg 10: [mem 0xfbc24000-0xfbc240ff 64bit]
[ 0.500891] pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
[ 0.500996] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
[ 0.501023] pci 0000:01:00.0: reg 10: [mem 0xfbbc0000-0xfbbdffff]
[ 0.501043] pci 0000:01:00.0: reg 14: [mem 0xfbb00000-0xfbb7ffff]
[ 0.501063] pci 0000:01:00.0: reg 18: [io 0xe000-0xe01f]
[ 0.501083] pci 0000:01:00.0: reg 1c: [mem 0xfbbe0000-0xfbbe3fff]
[ 0.501139] pci 0000:01:00.0: reg 30: [mem 0xfbb80000-0xfbbbffff pref]
[ 0.501201] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.501208] pci 0000:01:00.0: PME# disabled
[ 0.505858] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.505865] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.505872] pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.505882] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.505967] pci 0000:02:00.0: [1103:2300] type 0 class 0x000100
[ 0.505995] pci 0000:02:00.0: reg 10: [mem 0xfb800000-0xfb8fffff 64bit]
[ 0.506009] pci 0000:02:00.0: reg 18: [io 0xd000-0xd0ff]
[ 0.506063] pci 0000:02:00.0: reg 30: [mem 0xfb900000-0xfb97ffff pref]
[ 0.506126] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.506137] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 0.506141] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.506144] pci 0000:00:1c.4: bridge window [mem 0xfb800000-0xfb9fffff]
[ 0.506151] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.506183] pci 0000:03:01.0: [1131:7146] type 0 class 0x000480
[ 0.506197] pci 0000:03:01.0: reg 10: [mem 0xfba01000-0xfba011ff]
[ 0.506250] pci 0000:03:01.0: Disabling memory decoding and releasing memory resources.
[ 0.506254] pci 0000:03:01.0: Rounding up size of resource #0 to 0x1000.
[ 0.506268] pci 0000:03:02.0: [1131:7146] type 0 class 0x000480
[ 0.506281] pci 0000:03:02.0: reg 10: [mem 0xfba00000-0xfba001ff]
[ 0.506334] pci 0000:03:02.0: Disabling memory decoding and releasing memory resources.
[ 0.506339] pci 0000:03:02.0: Rounding up size of resource #0 to 0x1000.
[ 0.506379] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.506383] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.506387] pci 0000:00:1e.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.506393] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.506395] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.506398] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.506400] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.506401] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.506419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.506551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.506574] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.506600] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
[ 0.510868] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.510908] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.510947] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.510987] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.511026] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.511064] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.511103] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.511142] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.511196] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.511201] vgaarb: loaded
[ 0.511238] PCI: Using ACPI for IRQ routing
[ 0.511241] PCI: pci_cache_line_size set to 64 bytes
[ 0.511302] reserve RAM buffer: 0000000000092c00 - 000000000009ffff
[ 0.511303] reserve RAM buffer: 00000000cb442000 - 00000000cbffffff
[ 0.511306] reserve RAM buffer: 00000000cb614000 - 00000000cbffffff
[ 0.511308] reserve RAM buffer: 00000000cb800000 - 00000000cbffffff
[ 0.511383] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.511387] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.513394] Switching to clocksource tsc
[ 0.514101] pnp: PnP ACPI init
[ 0.514110] ACPI: bus type pnp registered
[ 0.514162] pnp 00:00: [bus 00-ff]
[ 0.514163] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.514165] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.514166] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.514168] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.514169] pnp 00:00: [mem 0x00000000 window]
[ 0.514170] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.514197] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.514254] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.514256] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.514257] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.514258] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.514259] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.514283] pnp 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.514381] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.514383] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.514405] pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514635] pnp 00:03: [dma 4]
[ 0.514636] pnp 00:03: [io 0x0000-0x000f]
[ 0.514638] pnp 00:03: [io 0x0081-0x0083]
[ 0.514639] pnp 00:03: [io 0x0087]
[ 0.514640] pnp 00:03: [io 0x0089-0x008b]
[ 0.514641] pnp 00:03: [io 0x008f]
[ 0.514642] pnp 00:03: [io 0x00c0-0x00df]
[ 0.514658] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.514664] pnp 00:04: [io 0x0070-0x0071]
[ 0.514671] pnp 00:04: [irq 8]
[ 0.514685] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.514690] pnp 00:05: [io 0x0061]
[ 0.514704] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.514717] pnp 00:06: [io 0x0010-0x001f]
[ 0.514718] pnp 00:06: [io 0x0022-0x003f]
[ 0.514719] pnp 00:06: [io 0x0044-0x005f]
[ 0.514720] pnp 00:06: [io 0x0062-0x0063]
[ 0.514722] pnp 00:06: [io 0x0065-0x006f]
[ 0.514723] pnp 00:06: [io 0x0072-0x007f]
[ 0.514724] pnp 00:06: [io 0x0080]
[ 0.514725] pnp 00:06: [io 0x0084-0x0086]
[ 0.514726] pnp 00:06: [io 0x0088]
[ 0.514727] pnp 00:06: [io 0x008c-0x008e]
[ 0.514728] pnp 00:06: [io 0x0090-0x009f]
[ 0.514730] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.514731] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.514732] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.514760] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.514767] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.514771] pnp 00:07: [irq 13]
[ 0.514786] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.515004] pnp 00:08: [io 0x0400-0x047f]
[ 0.515006] pnp 00:08: [io 0x1180-0x119f]
[ 0.515007] pnp 00:08: [io 0x0500-0x057f]
[ 0.515008] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.515010] pnp 00:08: [mem 0xfec00000-0xfecfffff]
[ 0.515011] pnp 00:08: [mem 0xfed08000-0xfed08fff]
[ 0.515012] pnp 00:08: [mem 0xff000000-0xffffffff]
[ 0.515038] pnp 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.012390] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 1.012415] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.012535] pnp: PnP ACPI: found 10 devices
[ 1.012536] ACPI: ACPI bus type pnp unregistered
[ 1.012542] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 1.012543] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 1.012545] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.012547] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.012549] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 1.012554] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 1.012557] system 00:08: [io 0x0400-0x047f] has been reserved
[ 1.012559] system 00:08: [io 0x1180-0x119f] has been reserved
[ 1.012560] system 00:08: [io 0x0500-0x057f] has been reserved
[ 1.012562] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.012564] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 1.012566] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[ 1.012568] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 1.018037] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.018040] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 1.018045] pci 0000:00:1c.0: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 1.018048] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 1.018055] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[ 1.018057] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.018062] pci 0000:00:1c.4: bridge window [mem 0xfb800000-0xfb9fffff]
[ 1.018066] pci 0000:00:1c.4: bridge window [mem pref disabled]
[ 1.018074] pci 0000:03:01.0: BAR 0: assigned [mem 0xfba00000-0xfba00fff]
[ 1.018079] pci 0000:03:01.0: BAR 0: set to [mem 0xfba00000-0xfba00fff] (PCI address [0xfba00000-0xfba00fff])
[ 1.018081] pci 0000:03:02.0: BAR 0: assigned [mem 0xfba01000-0xfba01fff]
[ 1.018085] pci 0000:03:02.0: BAR 0: set to [mem 0xfba01000-0xfba01fff] (PCI address [0xfba01000-0xfba01fff])
[ 1.018087] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 1.018088] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.018093] pci 0000:00:1e.0: bridge window [mem 0xfba00000-0xfbafffff]
[ 1.018096] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.018112] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.018117] pci 0000:00:1c.0: setting latency timer to 64
[ 1.018122] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.018126] pci 0000:00:1c.4: setting latency timer to 64
[ 1.018133] pci 0000:00:1e.0: setting latency timer to 64
[ 1.018136] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.018137] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.018139] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.018140] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xffffffff]
[ 1.018141] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.018143] pci_bus 0000:01: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 1.018144] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.018146] pci_bus 0000:02: resource 1 [mem 0xfb800000-0xfb9fffff]
[ 1.018147] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff]
[ 1.018149] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 1.018150] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 1.018151] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.018153] pci_bus 0000:03: resource 7 [mem 0xd0000000-0xffffffff]
[ 1.018174] NET: Registered protocol family 2
[ 1.018328] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.019114] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.021024] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.021254] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.021256] TCP reno registered
[ 1.021267] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.021317] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.021463] NET: Registered protocol family 1
[ 1.021476] pci 0000:00:02.0: Boot video device
[ 1.072072] PCI: CLS 64 bytes, default 64
[ 1.072130] Unpacking initramfs...
[ 1.247613] Freeing initrd memory: 11904k freed
[ 1.249550] IOMMU 1 0xfed93000: using Register based invalidation
[ 1.249554] IOMMU: Setting RMRR:
[ 1.249569] IOMMU: Setting identity map for device 0000:00:1d.0 [0xcb5fc000 - 0xcb611000]
[ 1.249632] IOMMU: Setting identity map for device 0000:00:1a.0 [0xcb5fc000 - 0xcb611000]
[ 1.249666] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 1.249681] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0x1000000]
[ 1.249897] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 1.251783] audit: initializing netlink socket (disabled)
[ 1.251796] type=2000 audit(1297624557.100:1): initialized
[ 1.261333] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.262364] VFS: Disk quotas dquot_6.5.2
[ 1.262398] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.262463] msgmni has been set to 15730
[ 1.262591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.262593] io scheduler noop registered
[ 1.262594] io scheduler deadline registered
[ 1.262616] io scheduler cfq registered (default)
[ 1.262866] pcieport 0000:00:1c.0: ACPI _OSC control granted for 0x1d
[ 1.262881] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.262926] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.262993] pcieport 0000:00:1c.4: ACPI _OSC control granted for 0x1d
[ 1.263005] pcieport 0000:00:1c.4: setting latency timer to 64
[ 1.263048] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 1.263130] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.263132] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.263136] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.263150] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.263151] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.263155] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.263206] intel_idle: MWAIT substates: 0x1120
[ 1.263207] intel_idle: v0.4 model 0x25
[ 1.263208] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.263356] Linux agpgart interface v0.103
[ 1.263399] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.263466] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 1.264038] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.276581] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.276611] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.538232] serial 0000:00:16.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.558500] 0000:00:16.3: ttyS0 at I/O 0xf0a0 (irq = 17) is a 16550A
[ 1.621944] PNP: No PS/2 controller found. Probing ports directly.
[ 1.624731] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.624735] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.624788] mice: PS/2 mouse device common for all mice
[ 1.624817] rtc_cmos 00:04: RTC can wake from S4
[ 1.669738] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.669776] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.669853] cpuidle: using governor ladder
[ 1.669959] cpuidle: using governor menu
[ 1.670106] TCP cubic registered
[ 1.670177] NET: Registered protocol family 10
[ 1.670440] lo: Disabled Privacy Extensions
[ 1.670548] Mobile IPv6
[ 1.670549] NET: Registered protocol family 17
[ 1.670552] Registering the dns_resolver key type
[ 1.670612] PM: Hibernation image not present or could not be loaded.
[ 1.670619] registered taskstats version 1
[ 1.670940] rtc_cmos 00:04: setting system clock to 2011-02-13 19:15:58 UTC (1297624558)
[ 1.670977] Initalizing network drop monitor service
[ 1.671019] Freeing unused kernel memory: 612k freed
[ 1.671091] Write protecting the kernel read-only data: 6144k
[ 1.671319] Freeing unused kernel memory: 860k freed
[ 1.671550] Freeing unused kernel memory: 872k freed
[ 1.720899] udev[74]: starting version 164
[ 1.732218] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.7-k2
[ 1.732220] e1000e: Copyright (c) 1999 - 2010 Intel Corporation.
[ 1.732255] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.732267] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.732385] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 1.753914] usbcore: registered new interface driver usbfs
[ 1.754026] usbcore: registered new interface driver hub
[ 1.754054] usbcore: registered new device driver usb
[ 1.764310] SCSI subsystem initialized
[ 1.768497] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.777784] libata version 3.00 loaded.
[ 1.791429] sata_mv 0000:02:00.0: version 1.28
[ 1.791459] sata_mv 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.791595] sata_mv: Highpoint RocketRAID BIOS CORRUPTS DATA on all attached drives, regardless of if/how they are configured. BEWARE!
[ 1.791597] sata_mv: For data safety, do not use sectors 8-9 on "Legacy" drives, and avoid the final two gigabytes on all RocketRAID BIOS initialized drives.
[ 1.791674] sata_mv 0000:02:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 1.791680] sata_mv 0000:02:00.0: setting latency timer to 64
[ 1.792262] scsi0 : sata_mv
[ 1.792335] scsi1 : sata_mv
[ 1.792379] scsi2 : sata_mv
[ 1.792423] scsi3 : sata_mv
[ 1.792462] ata1: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb822000 irq 16
[ 1.792466] ata2: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb824000 irq 16
[ 1.792470] ata3: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb826000 irq 16
[ 1.792474] ata4: SATA max UDMA/133 mmio m1048576@0xfb800000 port 0xfb828000 irq 16
[ 1.939060] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:27:0e:07:02:28
[ 1.939062] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.939136] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 9, PBA No: ffffff-0ff
[ 1.939162] e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.939164] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.939184] e1000e 0000:01:00.0: setting latency timer to 64
[ 1.939186] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.939193] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.939228] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.939375] e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
[ 1.939378] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[ 1.939380] e1000e 0000:01:00.0: irq 46 for MSI/MSI-X
[ 1.939567] e1000e 0000:01:00.0: Disabling ASPM L0s
[ 1.964834] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.968794] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.968798] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfbc27000
[ 1.984735] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.984761] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.984765] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.984769] usb usb1: Product: EHCI Host Controller
[ 1.984772] usb usb1: Manufacturer: Linux 2.6.37-p0wah ehci_hcd
[ 1.984774] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.984896] hub 1-0:1.0: USB hub found
[ 1.984900] hub 1-0:1.0: 3 ports detected
[ 1.984953] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.984964] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.984967] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.984972] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.036600] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.040566] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.040578] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbc26000
[ 2.056507] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.056529] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.056533] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.056537] usb usb2: Product: EHCI Host Controller
[ 2.056540] usb usb2: Manufacturer: Linux 2.6.37-p0wah ehci_hcd
[ 2.056542] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.056655] hub 2-0:1.0: USB hub found
[ 2.056658] hub 2-0:1.0: 3 ports detected
[ 2.056722] ahci 0000:00:1f.2: version 3.0
[ 2.056744] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.056805] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 2.072600] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.072602] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 2.072609] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.076421] e1000e 0000:01:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:5e:2b:04
[ 2.076424] e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 2.076440] e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: e46981-003
[ 2.112920] scsi4 : ahci
[ 2.113027] scsi5 : ahci
[ 2.113130] scsi6 : ahci
[ 2.113233] scsi7 : ahci
[ 2.113385] scsi8 : ahci
[ 2.113507] scsi9 : ahci
[ 2.113613] ata5: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25100 irq 47
[ 2.113616] ata6: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25180 irq 47
[ 2.113619] ata7: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25200 irq 47
[ 2.113622] ata8: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25280 irq 47
[ 2.113625] ata9: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25300 irq 47
[ 2.113627] ata10: SATA max UDMA/133 abar m2048@0xfbc25000 port 0xfbc25380 irq 47
[ 2.267869] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.276495] ata1.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 2.276497] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.284453] ata1.00: configured for UDMA/133
[ 2.284609] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 2.295731] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.427776] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.427780] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.428078] hub 1-1:1.0: USB hub found
[ 2.428277] hub 1-1:1.0: 6 ports detected
[ 2.431251] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.435261] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.435293] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.435329] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.435352] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.435375] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.437719] ata7.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 2.437725] ata7.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.441767] ata9.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 2.441769] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.441776] ata8.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 2.441778] ata8.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.441785] ata10.00: ATA-7: SAMSUNG HD154UI, 1AG01118, max UDMA7
[ 2.441787] ata10.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.444364] ata7.00: configured for UDMA/133
[ 2.448390] ata8.00: configured for UDMA/133
[ 2.448412] ata10.00: configured for UDMA/133
[ 2.448418] ata9.00: configured for UDMA/133
[ 2.490372] ata5.00: ATA-7: ST3500630AS, 3.AAC, max UDMA/133
[ 2.490377] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.538964] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 2.548473] ata5.00: configured for UDMA/133
[ 2.670882] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 2.670887] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.671179] hub 2-1:1.0: USB hub found
[ 2.671374] hub 2-1:1.0: 6 ports detected
[ 2.742418] usb 1-1.5: new full speed USB device using ehci_hcd and address 3
[ 2.758278] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.766879] ata2.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 2.766881] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 2.774858] ata2.00: configured for UDMA/133
[ 2.774968] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 2.834734] usb 1-1.5: New USB device found, idVendor=0451, idProduct=1446
[ 2.834740] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.835132] hub 1-1.5:1.0: USB hub found
[ 2.835385] hub 1-1.5:1.0: 4 ports detected
[ 2.905918] usb 1-1.6: new low speed USB device using ehci_hcd and address 4
[ 3.093946] usb 1-1.6: New USB device found, idVendor=051d, idProduct=0002
[ 3.093952] usb 1-1.6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.093956] usb 1-1.6: Product: Back-UPS CS 650 FW:817.v4.I USB FW:v4
[ 3.093960] usb 1-1.6: Manufacturer: American Power Conversion
[ 3.093964] usb 1-1.6: SerialNumber: 3B0822X57872
[ 3.169214] usb 1-1.5.1: new low speed USB device using ehci_hcd and address 5
[ 3.248661] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.257277] ata3.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 3.257279] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.265201] ata3.00: configured for UDMA/133
[ 3.265372] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 3.271015] usb 1-1.5.1: New USB device found, idVendor=045e, idProduct=001d
[ 3.271021] usb 1-1.5.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.271025] usb 1-1.5.1: Product: Microsoft Natural Keyboard Pro
[ 3.739120] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.747742] ata4.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 3.747744] ata4.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.755722] ata4.00: configured for UDMA/133
[ 3.755862] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 3.756027] scsi 4:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 3.756381] scsi 6:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 3.756560] scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 3.756745] scsi 8:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 3.757080] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD154UI 1AG0 PQ: 0 ANSI: 5
[ 3.771549] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.771579] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.771588] sd 0:0:0:0: [sda] Write Protect is off
[ 3.771590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.771608] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.771613] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.771616] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.771631] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.771986] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.772007] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.772021] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.772023] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.772039] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.772045] sd 3:0:0:0: [sdd] Write Protect is off
[ 3.772048] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.772065] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.772394] sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.772416] sd 6:0:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.772429] sd 4:0:0:0: [sde] Write Protect is off
[ 3.772431] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 3.772446] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.772449] sd 6:0:0:0: [sdf] Write Protect is off
[ 3.772451] sd 6:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 3.772465] sd 6:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.772747] sd 7:0:0:0: [sdg] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.772783] sd 7:0:0:0: [sdg] Write Protect is off
[ 3.772785] sd 7:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 3.772801] sd 7:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.773078] sd 8:0:0:0: [sdh] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.773124] sd 9:0:0:0: [sdi] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
[ 3.773158] sd 9:0:0:0: [sdi] Write Protect is off
[ 3.773160] sd 9:0:0:0: [sdi] Mode Sense: 00 3a 00 00
[ 3.773173] sd 9:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.773265] sd 8:0:0:0: [sdh] Write Protect is off
[ 3.773267] sd 8:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 3.773295] sd 8:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.779007] sda: unknown partition table
[ 3.779143] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.779380] sdi: unknown partition table
[ 3.779494] sd 9:0:0:0: [sdi] Attached SCSI disk
[ 3.783985] sdf: unknown partition table
[ 3.784109] sd 6:0:0:0: [sdf] Attached SCSI disk
[ 3.784400] sdg: unknown partition table
[ 3.784529] sd 7:0:0:0: [sdg] Attached SCSI disk
[ 3.784765] sdh: unknown partition table
[ 3.784871] sd 8:0:0:0: [sdh] Attached SCSI disk
[ 3.791892] sde: sde1 sde2
[ 3.792080] sd 4:0:0:0: [sde] Attached SCSI disk
[ 3.792266] sdd: unknown partition table
[ 3.792405] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 3.795690] sdc: unknown partition table
[ 3.795817] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.796512] sdb: unknown partition table
[ 3.796631] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.302870] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [American Power Conversion Back-UPS CS 650 FW:817.v4.I USB FW:v4] on usb-0000:00:1a.0-1.6/input0
[ 5.349986] input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.0/input/input0
[ 5.350042] generic-usb 0003:045E:001D.0002: input,hidraw1: USB HID v1.10 Keyboard [Microsoft Natural Keyboard Pro] on usb-0000:00:1a.0-1.5.1/input0
[ 5.356420] input: Microsoft Natural Keyboard Pro as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.1/1-1.5.1:1.1/input/input1
[ 5.356463] generic-usb 0003:045E:001D.0003: input,hidraw2: USB HID v1.10 Device [Microsoft Natural Keyboard Pro] on usb-0000:00:1a.0-1.5.1/input1
[ 5.356477] usbcore: registered new interface driver usbhid
[ 5.356478] usbhid: USB HID core driver
[ 5.475806] device-mapper: uevent: version 1.0.3
[ 5.476127] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 49.605164] PM: Starting manual resume from disk
[ 49.605166] PM: Hibernation image partition 254:2 present
[ 49.605167] PM: Looking for hibernation image.
[ 49.605378] PM: Image not found (code -22)
[ 49.605381] PM: Hibernation image not present or could not be loaded.
[ 49.746044] EXT3-fs: barriers not enabled
[ 49.765030] kjournald starting. Commit interval 5 seconds
[ 49.765182] EXT3-fs (dm-1): mounted filesystem with ordered data mode
[ 51.825303] udev[427]: starting version 164
[ 52.330220] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 52.330229] ACPI: Power Button [PWRB]
[ 52.330272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 52.330274] ACPI: Power Button [PWRF]
[ 52.350493] ACPI: acpi_idle yielding to intel_idle
[ 52.489747] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 52.594904] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 52.669513] udev[495]: renamed network interface eth1 to eth1-eth0
[ 52.689454] udev[447]: renamed network interface eth0 to eth1
[ 52.733181] udev[495]: renamed network interface eth1-eth0 to eth0
[ 53.975003] md: md1 stopped.
[ 53.982706] md: bind<sdg>
[ 53.982942] md: bind<sdh>
[ 53.983063] md: bind<sdi>
[ 53.983421] md: bind<sdf>
[ 54.077997] async_tx: api initialized (async)
[ 54.081764] xor: automatically using best checksumming function: generic_sse
[ 54.100511] generic_sse: 12618.000 MB/sec
[ 54.100513] xor: using function: generic_sse (12618.000 MB/sec)
[ 54.184253] raid6: int64x1 3363 MB/s
[ 54.252032] raid6: int64x2 3261 MB/s
[ 54.319818] raid6: int64x4 2817 MB/s
[ 54.387587] raid6: int64x8 2177 MB/s
[ 54.455370] raid6: sse2x1 8158 MB/s
[ 54.523152] raid6: sse2x2 9492 MB/s
[ 54.590933] raid6: sse2x4 10845 MB/s
[ 54.590934] raid6: using algorithm sse2x4 (10845 MB/s)
[ 54.602547] md: raid6 personality registered for level 6
[ 54.602549] md: raid5 personality registered for level 5
[ 54.602550] md: raid4 personality registered for level 4
[ 54.602650] bio: create slab <bio-1> at 1
[ 54.602669] md/raid:md1: device sdf operational as raid disk 0
[ 54.602673] md/raid:md1: device sdi operational as raid disk 3
[ 54.602677] md/raid:md1: device sdh operational as raid disk 2
[ 54.602680] md/raid:md1: device sdg operational as raid disk 1
[ 54.602965] md/raid:md1: allocated 4282kB
[ 54.603098] md/raid:md1: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 54.603102] RAID conf printout:
[ 54.603105] --- level:5 rd:4 wd:4
[ 54.603108] disk 0, o:1, dev:sdf
[ 54.603111] disk 1, o:1, dev:sdg
[ 54.603114] disk 2, o:1, dev:sdh
[ 54.603116] disk 3, o:1, dev:sdi
[ 54.603158] md1: detected capacity change from 0 to 4500905263104
[ 54.605449] md1: unknown partition table
[ 54.608171] md: md0 stopped.
[ 54.633026] md: bind<sdb>
[ 54.633294] md: bind<sdc>
[ 54.633459] md: bind<sdd>
[ 54.633611] md: bind<sda>
[ 54.634752] md/raid:md0: device sda operational as raid disk 0
[ 54.634754] md/raid:md0: device sdd operational as raid disk 3
[ 54.634755] md/raid:md0: device sdc operational as raid disk 2
[ 54.634756] md/raid:md0: device sdb operational as raid disk 1
[ 54.635071] md/raid:md0: allocated 4282kB
[ 54.635095] md/raid:md0: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 54.635097] RAID conf printout:
[ 54.635098] --- level:5 rd:4 wd:4
[ 54.635099] disk 0, o:1, dev:sda
[ 54.635101] disk 1, o:1, dev:sdb
[ 54.635102] disk 2, o:1, dev:sdc
[ 54.635103] disk 3, o:1, dev:sdd
[ 54.635127] md0: detected capacity change from 0 to 3000613994496
[ 54.636428] md0: unknown partition table
[ 55.135496] EXT3-fs (dm-1): using internal journal
[ 55.577732] loop: module loaded
[ 62.625763] Adding 11296764k swap on /dev/mapper/server3-swap_1. Priority:-1 extents:1 across:11296764k
[ 63.502450] EXT3-fs: barriers not enabled
[ 63.506643] kjournald starting. Commit interval 5 seconds
[ 63.507322] EXT3-fs (dm-5): warning: maximal mount count reached, running e2fsck is recommended
[ 63.547272] EXT3-fs (dm-5): using internal journal
[ 63.547281] EXT3-fs (dm-5): mounted filesystem with ordered data mode
[ 64.260017] EXT3-fs: barriers not enabled
[ 64.267420] kjournald starting. Commit interval 5 seconds
[ 64.267895] EXT3-fs (dm-6): warning: maximal mount count reached, running e2fsck is recommended
[ 64.316304] EXT3-fs (dm-6): using internal journal
[ 64.316311] EXT3-fs (dm-6): mounted filesystem with ordered data mode
[ 65.672309] Bridge firewalling registered
[ 65.673644] device eth0 entered promiscuous mode
[ 65.748117] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 66.321510] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 66.377027] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[ 66.377613] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 66.377633] device eth1 entered promiscuous mode
[ 67.797698] e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 67.797701] e1000e 0000:00:19.0: eth1: 10/100 speed: disabling TSO
[ 67.798261] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 68.491205] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 68.491863] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 68.491991] intern: port 1(eth0) entering learning state
[ 68.491993] intern: port 1(eth0) entering learning state
[ 69.486945] intern: port 1(eth0) entering forwarding state
[ 75.798518] intern: no IPv6 routers present
[ 78.071222] eth1: no IPv6 routers present
[ 79.458747] eth0: no IPv6 routers present
[ 82.589075] extern: port 1(eth1) entering learning state
[ 82.589077] extern: port 1(eth1) entering learning state
[ 83.585445] extern: port 1(eth1) entering forwarding state
[ 93.565210] extern: no IPv6 routers present
[ 96.046027] fuse init (API version 7.15)
[ 115.870864] [drm] Initialized drm 1.1.0 20060810
[ 116.108781] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 116.108785] i915 0000:00:02.0: setting latency timer to 64
[ 116.137088] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 116.137090] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 116.137387] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[ 116.139896] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 116.195814] Console: switching to colour frame buffer device 128x48
[ 116.195819] fb0: inteldrmfb frame buffer device
[ 116.195821] drm: registered panic notifier
[ 116.195884] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20101013/video-1215)
[ 116.195927] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 116.196000] ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
[ 116.196120] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 116.346646] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[ 116.346650] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.346651] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 07 ff ff ................
[ 116.346652] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.346653] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.346655] <3>ff ff fe 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.346656] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.346657] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.346658] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.346659]
[ 116.405135] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[ 116.405137] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.405138] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.405139] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.405140] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.405142] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.405143] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.405144] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.405145] <3>00 00 00 00 00 00 00 00 00 00 07 ff ff ff ff ff ................
[ 116.405146]
[ 116.479359] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[ 116.479362] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.479363] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 1f ff ................
[ 116.479364] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.479365] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.479367] <3>ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.479368] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.479369] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.479370] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.479371]
[ 116.537776] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[ 116.537778] <3>00 00 00 00 00 00 00 00 00 00 00 1f ff ff ff ff ................
[ 116.537780] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.537781] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.537782] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.537783] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.537785] <3>ff ff ff ff ff ff f0 00 00 00 00 00 00 00 00 00 ................
[ 116.537786] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.537787] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.537788]
[ 116.596242] [drm:drm_edid_block_valid] *ERROR* Raw EDID:
[ 116.596244] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.596246] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ................
[ 116.596247] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.596248] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.596250] <3>ff ff ff f0 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.596251] <3>00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 116.596252] <3>00 00 00 00 00 00 00 00 00 ff ff ff ff ff ff ff ................
[ 116.596253] <3>ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
[ 116.596254]
[ 129.651554] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 130.222336] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 136.464820] sshd (3009): /proc/3009/oom_adj is deprecated, please use /proc/3009/oom_score_adj instead.
[ 139.370885] tun: Universal TUN/TAP device driver, 1.6
[ 139.370887] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 139.372354] device vnet0 entered promiscuous mode
[ 139.373112] intern: port 2(vnet0) entering learning state
[ 139.373115] intern: port 2(vnet0) entering learning state
[ 140.366218] intern: port 2(vnet0) entering forwarding state
[ 140.678568] device vnet1 entered promiscuous mode
[ 140.679186] intern: port 3(vnet1) entering learning state
[ 140.679189] intern: port 3(vnet1) entering learning state
[ 140.680353] device vnet2 entered promiscuous mode
[ 140.680974] extern: port 2(vnet2) entering learning state
[ 140.680976] extern: port 2(vnet2) entering learning state
[ 141.564111] lo: Disabled Privacy Extensions
[ 141.674005] intern: port 3(vnet1) entering forwarding state
[ 141.674010] extern: port 2(vnet2) entering forwarding state
[ 148.754142] e1000e 0000:01:00.0: Disabling ASPM L1
[ 148.754150] e1000e 0000:01:00.0: eth0: changing MTU from 1500 to 9000
[ 148.863975] intern: port 1(eth0) entering forwarding state
[ 149.767870] vnet0: no IPv6 routers present
[ 151.187282] vnet1: no IPv6 routers present
[ 151.506306] vnet2: no IPv6 routers present
[ 151.614962] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 151.615637] intern: port 1(eth0) entering learning state
[ 151.615638] intern: port 1(eth0) entering learning state
[ 152.610702] intern: port 1(eth0) entering forwarding state
[ 419.396745] pci-stub: invalid id string ""
[ 419.398060] pci-stub 0000:03:01.0: claimed by stub
[ 419.398064] pci-stub 0000:03:02.0: claimed by stub
[ 419.398113] pci-stub 0000:03:02.0: claimed by stub
[ 437.934430] pci-stub 0000:03:01.0: claimed by stub
[ 437.935177] pci-stub 0000:03:02.0: claimed by stub
[ 438.916773] device vnet3 entered promiscuous mode
[ 438.917462] intern: port 4(vnet3) entering learning state
[ 438.917465] intern: port 4(vnet3) entering learning state
[ 439.039356] pci-stub 0000:03:01.0: enabling device (0000 -> 0002)
[ 439.039370] pci-stub 0000:03:01.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 439.911760] intern: port 4(vnet3) entering forwarding state
[ 440.551975] assign device 0:3:1.0
[ 440.552264] pci-stub 0000:03:02.0: enabling device (0000 -> 0002)
[ 440.552272] pci-stub 0000:03:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 440.552279] assign device 0:3:2.0
[ 449.018374] vnet3: no IPv6 routers present
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM)
2011-02-15 20:57 Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM) Da Powah
@ 2011-02-16 23:24 ` Alex Williamson
2011-02-17 19:39 ` Da Powah
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Alex Williamson @ 2011-02-16 23:24 UTC (permalink / raw)
To: Da Powah; +Cc: kvm
On Tue, 2011-02-15 at 20:57 +0000, Da Powah wrote:
> Hi,
>
> i`ve got a question about pci passthrogh of 2 pci devices (2x DVB-S2
> PCI cards with Saa7146 PCI Bridge from Technotrend: S2-3200).
>
> I am using squeeze with a 2.6.37 selfcompiled Kernel. I want to
> passthrough both devices to a virtual machine (Win7) an get problems.
> If i passthrough one device (other is unplugged) it works flawlessly.
I'm glad to hear it works one at a time. It's oddly specific that you
mention it works if the other card is unplugged, can you only physically
have one card plugged in at a time for it to work (ie. if you have both
cards physically installed, but only one assigned to the guest, does it
work)? Can you simultaneously assign each card to separate guests and
they work?
> The time i add both devices and pass them through i am still able to
> start the VM and i don`t see anything in the error logs. Even Windows7
> or XP detects both cards and installs the driver correctly (actual BDA
> Driver, standard broadcast video driver). But the time i want to acces
> the cards, i get a BSOD - caused by the driver.
I'll toss out a dumb question, can the drivers for Win7 or WinXP drive
two cards when running on bare metal? Does a Linux guest work with both
cards better?
> I already aligned the io memory of both devices, checked the libvirt
> logs, kernel and syslogs - there is nothing for a kvm newbe that seems
> to be odd. The kernel is compiled with all the mentioned kernel
> options of the linux-kvm.org page - except that i compiled the stub
> driver as module. One card alone (both tried separately) is working
> w/o any flaws. Kvm is able to pass through all devices behind a PCI
> Bridge - so take a look at the 03:0x.0 devices below: i use those 2
> sat boards only in 3 PCI slots.
>
> What am i able to do to make deeper analysis or to solve the
> problem ?
If each card works when assigned separately and you can boot the guest
with both cards assign and the drivers load and device manager isn't
reporting any errors, I'd lean towards a Windows driver issue. There is
some debugging you can enable in hw/device-assignment.c that might shed
some light on what the drivers is trying to do before the BSOD. What
error is the BSOD reporting? Are you using the latest qemu-kvm.git?
Thanks,
Alex
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM)
2011-02-16 23:24 ` Alex Williamson
@ 2011-02-17 19:39 ` Da Powah
2011-02-17 21:14 ` Da Powah
2011-02-22 11:48 ` Da Powah
2 siblings, 0 replies; 7+ messages in thread
From: Da Powah @ 2011-02-17 19:39 UTC (permalink / raw)
To: kvm
> > i`ve got a question about pci passthrogh of 2 pci devices (2x DVB-S2
> > PCI cards with Saa7146 PCI Bridge from Technotrend: S2-3200).
> >
> > I am using squeeze with a 2.6.37 selfcompiled Kernel. I want to
> > passthrough both devices to a virtual machine (Win7) an get problems.
> > If i passthrough one device (other is unplugged) it works flawlessly.
>
> I'm glad to hear it works one at a time. It's oddly specific that you
> mention it works if the other card is unplugged, can you only physically
> have one card plugged in at a time for it to work (ie. if you have both
> cards physically installed, but only one assigned to the guest, does it
> work)? Can you simultaneously assign each card to separate guests and
> they work?
I tried both devices, one at a time. Both are working well.
KVM supports the passthrough with all devices together behind a bridge only. So
i have to pass all 03.0x.y devices through to one guest only.
> > The time i add both devices and pass them through i am still able to
> > start the VM and i don`t see anything in the error logs. Even Windows7
> > or XP detects both cards and installs the driver correctly (actual BDA
> > Driver, standard broadcast video driver). But the time i want to acces
> > the cards, i get a BSOD - caused by the driver.
>
> I'll toss out a dumb question, can the drivers for Win7 or WinXP drive
> two cards when running on bare metal? Does a Linux guest work with both
> cards better?
The driver support more than one devices. I already contacted the support and
they assured me, that the driver i used is working. Using both cards in Linux
won`t help, because i want to use them with a windows application.
> > I already aligned the io memory of both devices, checked the libvirt
> > logs, kernel and syslogs - there is nothing for a kvm newbe that seems
> > to be odd. The kernel is compiled with all the mentioned kernel
> > options of the linux-kvm.org page - except that i compiled the stub
> > driver as module. One card alone (both tried separately) is working
> > w/o any flaws. Kvm is able to pass through all devices behind a PCI
> > Bridge - so take a look at the 03:0x.0 devices below: i use those 2
> > sat boards only in 3 PCI slots.
> >
> > What am i able to do to make deeper analysis or to solve the
> > problem ?
>
> If each card works when assigned separately and you can boot the guest
> with both cards assign and the drivers load and device manager isn't
> reporting any errors, I'd lean towards a Windows driver issue. There is
> some debugging you can enable in hw/device-assignment.c that might shed
> some light on what the drivers is trying to do before the BSOD. What
> error is the BSOD reporting? Are you using the latest qemu-kvm.git?
The drivers work on 'bare metal' as you mentioned above. I won`t believe that
its a pure driver-only issue for now. But the other behavior of the passed
through device may cause the driver fault. The BSOD tells, that it is a general
driver issue which caused the fault.
I am using the kvm codse which is distributed in the kernel 2.6.37 and standard
debian squeeze repositories for installation of the tools lib-virt, etc...
I am trying to get some more PCI spcecific data from the windows guests. I will
try to use both cards in a linux vm.
> Thanks,
>
> Alex
Thanks for participating in my very special problem,
DP
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM)
2011-02-16 23:24 ` Alex Williamson
2011-02-17 19:39 ` Da Powah
@ 2011-02-17 21:14 ` Da Powah
2011-02-22 11:48 ` Da Powah
2 siblings, 0 replies; 7+ messages in thread
From: Da Powah @ 2011-02-17 21:14 UTC (permalink / raw)
To: kvm
I extracted some WindowsXPpro VM PCI data with pcitree - maybe this gives you a
hint:
IRQ Mapping:
INT line 0 <-
INT line 1 <-
INT line 2 <-
INT line 3 <-
INT line 4 <-
INT line 5 <- 5<-A(0.3.0)1000.1AF4 5<-A(0.7.0)7146.1131
INT line 6 <-
INT line 7 <-
INT line 8 <-
INT line 9 <- 9<-A(0.1.3)7113.8086
INT line 10 <- 10<-D(0.1.2)7020.8086 10<-A(0.4.0)1001.1AF4 10<-A(0.6.0)1002.1AF4
INT line 11 <- 11<-A(0.5.0)7146.1131
INT line 12 <-
INT line 13 <-
INT line 14 <-
INT line 15 <-
IO memory Map:
F0000000 <- : BAR1(0.2.0)15AD.0405
F0800000 <- :
F1000000 <- : BAR2(0.2.0)15AD.0405 BAR1(0.3.0)1AF4.1000
BAR0(0.5.0)1131.7146 BAR0(0.7.0)1131.7146
host CPU
: 0.00.0 Host/PCI; Bridge Device 8086 1237 [Intel] 82440/1FX 440FX
´(Natoma) System Controller: 82440/1FX 440FX (Natoma) System Controller
// SubIDs 1af4 1100 no-name: no-name
1237 8086 <00 : DID VID
0000 0003 <04 : Stat Cmd
0600 0002 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
0000 0000 <10 : BAR 0
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
1100 1AF4 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0000 <34 : reserved
0000 0000 <38 : reserved
0000 0000 <3C : maxLat minGnt IntPin IntLine
: 0.01.0 PCI/ISA; Bridge Device 8086 7000 [Intel] 82371SB PIIX3
ISA Bridge: 82371SB PIIX3 ISA Bridge // SubIDs 1af4 1100 no-name: no-name
7000 8086 <00 : DID VID
0200 0007 <04 : Stat Cmd
0601 0000 <08 : BaseClass SubClass PgmIF RevID
0080 0000 <0C : BIST Header LatTimer CacheLSize
0000 0000 <10 : BAR 0
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
1100 1AF4 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0000 <34 : reserved
0000 0000 <38 : reserved
0000 0000 <3C : maxLat minGnt IntPin IntLine
: 0.01.1 o. Mass Storage Controller 8086 7010 [Intel] 82371SB PIIX3
EIDE Controller: 82371SB PIIX3 EIDE Controller
// SubIDs 1af4 1100 no-name: no-name
7010 8086 <00 : DID VID
0280 0007 <04 : Stat Cmd
0101 8000 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
0000 0000 <10 : BAR 0
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 C001 <20 : BAR 4 io
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
1100 1AF4 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0000 <34 : reserved
0000 0000 <38 : reserved
0000 0000 <3C : maxLat minGnt IntPin IntLine
: 0.01.2 Universal Host Controller; USB (Universal Serial Bus);
Serial Bus Controller 8086 7020 [Intel] 82371SB PIIX3 USB Controller:
82371SB PIIX3 USB Controller // SubIDs 1af4 1100 no-name: no-name
7020 8086 <00 : DID VID
0000 0007 <04 : Stat Cmd
0C03 0001 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
0000 0000 <10 : BAR 0
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 C021 <20 : BAR 4 io
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
1100 1AF4 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0000 <34 : reserved
0000 0000 <38 : reserved
0000 040A <3C : maxLat minGnt IntPin IntLine
: 0.01.3 Other; Bridge Device 8086 7113 [Intel] 82371AB/EB/MB
PIIX4/E/M Power Management Controller: 82371AB/EB/MB PIIX4/E/M
Power Management Controller // SubIDs 1af4 1100 no-name: no-name
7113 8086 <00 : DID VID
0280 0003 <04 : Stat Cmd
0680 0003 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
0000 0000 <10 : BAR 0
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
1100 1AF4 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0000 <34 : reserved
0000 0000 <38 : reserved
0000 0109 <3C : maxLat minGnt IntPin IntLine
: 0.02.0 VGA; PC Compatible; Display Controller 15ad 0405 [VMware]
VGA 4.0.5: VGA 4.0.5 // SubIDs 15ad 0405 VGA 4.0.5: VGA 4.0.5
0405 15AD <00 : DID VID
0000 0007 <04 : Stat Cmd
0300 0000 <08 : BaseClass SubClass PgmIF RevID
0000 4000 <0C : BIST Header LatTimer CacheLSize
0000 C041 <10 : BAR 0 io
F000 0008 <14 : BAR 1 mem pref. 32bit
F100 0008 <18 : BAR 2 mem pref. 32bit
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
0405 15AD <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0000 <34 : reserved
0000 0000 <38 : reserved
0000 0000 <3C : maxLat minGnt IntPin IntLine
: 0.03.0 Ethernet; Network Controller 1af4 1000 [no VID] no device
name found: no device description found // SubIDs 1af4 0001 no-name: no-name
1000 1AF4 <00 : DID VID
0010 0007 <04 : Stat Cmd
0200 0000 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
0000 C061 <10 : BAR 0 io
F101 0000 <14 : BAR 1 mem 32bit
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
0001 1AF4 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0040 <34 : reserved
0000 0000 <38 : reserved
0000 0105 <3C : maxLat minGnt IntPin IntLine
: 0.04.0 SCSI; Mass Storage Controller 1af4 1001 [no VID] no device
name found: no device description found // SubIDs 1af4 0002 no-name: no-name
1001 1AF4 <00 : DID VID
0000 0007 <04 : Stat Cmd
0100 0000 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
0000 C081 <10 : BAR 0 io
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
0002 1AF4 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0000 <34 : reserved
0000 0000 <38 : reserved
0000 010A <3C : maxLat minGnt IntPin IntLine
: 0.05.0 Other; Multimedia Device 1131 7146 [Philips] SAA7146
Multimedia Bridge Scaler: SAA7146 Multimedia Bridge Scaler
// SubIDs 13c2 1019 Happauge WinTV: no-name
7146 1131 <00 : DID VID
0280 0006 <04 : Stat Cmd
0480 0001 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
F101 1000 <10 : BAR 0 mem 32bit
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
1019 13C2 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0040 <34 : reserved
0000 0000 <38 : reserved
260F 010B <3C : maxLat minGnt IntPin IntLine
: 0.06.0 RAM; Memory Controller 1af4 1002 [no VID] no device name
found: no device description found // SubIDs 1af4 0005 no-name: no-name
1002 1AF4 <00 : DID VID
0000 0003 <04 : Stat Cmd
0500 0000 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
0000 C0C1 <10 : BAR 0 io
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
0005 1AF4 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0000 <34 : reserved
0000 0000 <38 : reserved
0000 010A <3C : maxLat minGnt IntPin IntLine
: 0.07.0 Other; Multimedia Device 1131 7146 [Philips] SAA7146
Multimedia Bridge Scaler: SAA7146 Multimedia Bridge Scaler
// SubIDs 13c2 1019 Happauge WinTV: no-name
7146 1131 <00 : DID VID
0280 0006 <04 : Stat Cmd
0480 0001 <08 : BaseClass SubClass PgmIF RevID
0000 0000 <0C : BIST Header LatTimer CacheLSize
F101 2000 <10 : BAR 0 mem 32bit
0000 0000 <14 : BAR 1
0000 0000 <18 : BAR 2
0000 0000 <1C : BAR 3
0000 0000 <20 : BAR 4
0000 0000 <24 : BAR 5
0000 0000 <28 : Cardbus_CIS_Ptr
1019 13C2 <2C : SubID SubVendorID
0000 0000 <30 : Exp_ROM_BAR
0000 0040 <34 : reserved
0000 0000 <38 : reserved
260F 0105 <3C : maxLat minGnt IntPin IntLine
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM)
@ 2011-02-19 22:53 Da Powah
2011-02-20 1:16 ` Da Powah
0 siblings, 1 reply; 7+ messages in thread
From: Da Powah @ 2011-02-19 22:53 UTC (permalink / raw)
To: kvm
Hi Alex,
i got some more output and i am getting closer: i installed mythbuntu as vm and
tested with both cards and with one only card via passthrough. One card
assembled works nice, two cards assembled gives me an error: there is no
frontend0 found in '/dev/dvb/adapter0/frontend0'. A look into both dmesg and a
diff shows, that there is a change in the IRQ Number (10->11) and the eeprom of
the device couldnt be read. I am not able to take a conclusion of that - maybe
you can give me one more hint.
I will try tomorrow to use both devices on 'bare metal' to make sure it is
working in this configuration. More infos will come.
bye for now,
DP
-------------------------------------------------------------------------------
lspci on mythubuntu vm:
virtual-machine:~$ lspci -vvv -s 00:06.0
00:06.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH S2-3200
Physical Slot: 6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2031000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: budget_ci dvb
Kernel modules: budget-ci
virtual-machine:~$ lspci -vvv -s 00:07.0
00:07.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
Subsystem: Technotrend Systemtechnik GmbH S2-3200
Physical Slot: 7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3750ns min, 9500ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f2032000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: budget_ci dvb
Kernel modules: budget-ci
-------------------------------------------------------------------------------
lsmod on mythubuntu vm:
virtual-machine:~$ lsmod
Module Size Used by
lnbp21 2338 0
stb6100 7128 0
stb0899 36531 0
rc_tt_1500 1310 0
snd_intel8x0 31371 0
snd_ac97_codec 125227 1 snd_intel8x0
ac97_bus 1474 1 snd_ac97_codec
snd_pcm 89104 2 snd_intel8x0,snd_ac97_codec
snd_seq_midi 5932 0
ir_lirc_codec 3888 0
lirc_dev 11209 1 ir_lirc_codec
snd_rawmidi 22207 1 snd_seq_midi
ir_sony_decoder 2381 0
snd_seq_midi_event 7291 1 snd_seq_midi
ir_jvc_decoder 2442 0
snd_seq 57512 2 snd_seq_midi,snd_seq_midi_event
ir_rc6_decoder 3018 0
snd_timer 23850 2 snd_pcm,snd_seq
snd_seq_device 6912 3 snd_seq_midi,snd_rawmidi,snd_seq
joydev 11395 0
ir_rc5_decoder 2474 0
ir_nec_decoder 2442 0
budget_ci 22413 0
snd 64181 7
snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,
snd_seq_device
budget_core 9552 1 budget_ci
dvb_core 105239 2 budget_ci,budget_core
saa7146 17480 2 budget_ci,budget_core
usbhid 42030 0
psmouse 62080 0
soundcore 1240 1 snd
lp 10201 0
ttpci_eeprom 1953 1 budget_core
i2c_piix4 10047 0
ir_core 16906 10
rc_tt_1500,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,
ir_rc5_decoder,ir_nec_decoder,budget_ci
serio_raw 4910 0
snd_page_alloc 8588 2 snd_intel8x0,snd_pcm
virtio_balloon 4477 0
hid 84710 1 usbhid
parport 37032 1 lp
virtio_blk 5622 3
virtio_net 13671 0
floppy 65299 0
virtio_pci 7100 0
virtio_ring 6098 4 virtio_balloon,virtio_blk,virtio_net,
virtio_pci
virtio 4912 4 virtio_balloon,virtio_blk,virtio_net,
virtio_pci
-------------------------------------------------------------------------------
dmesg with 2 cards in mythbuntu vm - NOT WORKING:
virtual-machine:/$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-25-generic (buildd@crested) (gcc version
4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC
2011 (Ubuntu 2.6.35-25.44-generic 2.6.35.10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic
root=UUID=58eb9e81-3bc6-4266-ad52-8030a004f4ba ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffb000 (usable)
[ 0.000000] BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000132300000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x132300 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] last_pfn = 0xdfffb max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000dfffb000 (usable)
[ 0.000000] modified: 00000000dfffb000 - 00000000e0000000 (reserved)
[ 0.000000] modified: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000132300000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f8870] f8870
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfffb000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfffb000 page 4k
[ 0.000000] kernel direct mapping tables up to dfffb000 @ 16000-1c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000132300000
[ 0.000000] 0100000000 - 0132200000 page 2M
[ 0.000000] 0132200000 - 0132300000 page 4k
[ 0.000000] kernel direct mapping tables up to 132300000 @ 1a000-21000
[ 0.000000] RAMDISK: 37572000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f8820 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffdd90 00034 (v01 BOCHS BXPCRSDT 00000001
BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dffffe70 00074 (v01 BOCHS BXPCFACP 00000001
BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffdf30 01EC4 (v01 BXPC BXDSDT 00000001
INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dffffe00 00040
[ 0.000000] ACPI: SSDT 00000000dfffdef0 00037 (v01 BOCHS BXPCSSDT 00000001
BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dfffde10 00072 (v01 BOCHS BXPCAPIC 00000001
BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dfffddd0 00038 (v01 BOCHS BXPCHPET 00000001
BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000132300000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000132300000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] kvm-clock: Using msrs 12 and 11
[ 0.000000] kvm-clock: cpu 0, msr 0:1aeb901, boot clock
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff880100200000-ffff8801041fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00132300
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfffb
[ 0.000000] 0: 0x00100000 -> 0x00132300
[ 0.000000] On node 0 totalpages: 1122954
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 899123 pages, LIFO batch:31
[ 0.000000] Normal zone: 2811 pages used for memmap
[ 0.000000] Normal zone: 202757 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fffbc000
[ 0.000000] PM: Registered nosave memory: 00000000fffbc000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:1ffbc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192
d23168 u2097152
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] kvm-clock: cpu 0, msr 0:1e15901, primary cpu clock
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1105807
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic
root=UUID=58eb9e81-3bc6-4266-ad52-8030a004f4ba ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (49 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [0037572000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001d18000 - 0001d18071] BRK
[ 0.000000] #4 [000009f000 - 00000f8870] BIOS reserved
[ 0.000000] #5 [00000f8870 - 00000f8880] MP-table mpf
[ 0.000000] #6 [00000f8988 - 0000100000] BIOS reserved
[ 0.000000] #7 [00000f8880 - 00000f8988] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #10 [0000016000 - 000001a000] PGTABLE
[ 0.000000] #11 [000001a000 - 000001c000] PGTABLE
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #13 [0001d18080 - 0001d19080] BOOTMEM
[ 0.000000] #14 [0001d17140 - 0001d17488] BOOTMEM
[ 0.000000] #15 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #16 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #17 [0100200000 - 0104200000] MEMMAP 0
[ 0.000000] #18 [0001d174c0 - 0001d17640] BOOTMEM
[ 0.000000] #19 [0001d19080 - 0001d31080] BOOTMEM
[ 0.000000] #20 [0001d31080 - 0001d37080] BOOTMEM
[ 0.000000] #21 [0001d38000 - 0001d39000] BOOTMEM
[ 0.000000] #22 [0001d17640 - 0001d17681] BOOTMEM
[ 0.000000] #23 [0001d176c0 - 0001d17703] BOOTMEM
[ 0.000000] #24 [0001d17740 - 0001d17900] BOOTMEM
[ 0.000000] #25 [0001d17900 - 0001d17968] BOOTMEM
[ 0.000000] #26 [0001d17980 - 0001d179e8] BOOTMEM
[ 0.000000] #27 [0001d17a00 - 0001d17a68] BOOTMEM
[ 0.000000] #28 [0001d17a80 - 0001d17ae8] BOOTMEM
[ 0.000000] #29 [0001d17b00 - 0001d17b68] BOOTMEM
[ 0.000000] #30 [0001d17b80 - 0001d17be8] BOOTMEM
[ 0.000000] #31 [0001d17c00 - 0001d17c68] BOOTMEM
[ 0.000000] #32 [0001d17c80 - 0001d17ca0] BOOTMEM
[ 0.000000] #33 [0001d17cc0 - 0001d17ce0] BOOTMEM
[ 0.000000] #34 [0001d17d00 - 0001d17d6a] BOOTMEM
[ 0.000000] #35 [0001d17d80 - 0001d17dea] BOOTMEM
[ 0.000000] #36 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #37 [0001d17e00 - 0001d17e08] BOOTMEM
[ 0.000000] #38 [0001d17e40 - 0001d17e48] BOOTMEM
[ 0.000000] #39 [0001d17e80 - 0001d17e84] BOOTMEM
[ 0.000000] #40 [0001d17ec0 - 0001d17ec8] BOOTMEM
[ 0.000000] #41 [0001d37080 - 0001d371d0] BOOTMEM
[ 0.000000] #42 [0001d17f00 - 0001d17f80] BOOTMEM
[ 0.000000] #43 [0001d17f80 - 0001d18000] BOOTMEM
[ 0.000000] #44 [0001d39000 - 0001d41000] BOOTMEM
[ 0.000000] #45 [0001e1e000 - 0005e1e000] BOOTMEM
[ 0.000000] #46 [0001d41000 - 0001d61000] BOOTMEM
[ 0.000000] #47 [0001d61000 - 0001da1000] BOOTMEM
[ 0.000000] #48 [000001c800 - 0000024800] BOOTMEM
[ 0.000000] Memory: 4335812k/5016576k available (5714k kernel code, 524760k
absent, 156004k reserved, 5377k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 45875200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 3324.608 MHz processor.
[ 0.010000] Calibrating delay loop (skipped) preset value.. 6649.21 BogoMIPS
(lpj=33246080)
[ 0.010000] pid_max: default: 32768 minimum: 301
[ 0.010000] Security Framework initialized
[ 0.010000] AppArmor: AppArmor initialized
[ 0.010000] Yama: becoming mindful.
[ 0.010000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010000] Mount-cache hash table entries: 256
[ 0.010000] Initializing cgroup subsys ns
[ 0.010000] Initializing cgroup subsys cpuacct
[ 0.010000] Initializing cgroup subsys memory
[ 0.010000] Initializing cgroup subsys devices
[ 0.010000] Initializing cgroup subsys freezer
[ 0.010000] Initializing cgroup subsys net_cls
[ 0.010012] mce: CPU supports 10 MCE banks
[ 0.010047] Performance Events: unsupported p6 CPU model 2 no PMU driver,
software events only.
[ 0.010186] SMP alternatives: switching to UP code
[ 0.029027] Freeing SMP alternatives: 24k freed
[ 0.029044] ACPI: Core revision 20100428
[ 0.030850] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.030855] ftrace: allocating 22681 entries in 89 pages
[ 0.040072] Setting APIC routing to flat
[ 0.040985] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.040987] CPU0: Intel QEMU Virtual CPU version 0.12.5 stepping 03
[ 0.050000] Brought up 1 CPUs
[ 0.050000] Total of 1 processors activated (6649.21 BogoMIPS).
[ 0.050000] devtmpfs: initialized
[ 0.050000] regulator: core version 0.5
[ 0.050000] Time: 19:42:48 Date: 02/19/11
[ 0.050000] NET: Registered protocol family 16
[ 0.050000] ACPI: bus type pci registered
[ 0.050000] PCI: Using configuration type 1 for base access
[ 0.050000] bio: create slab <bio-0> at 0
[ 0.050000] ACPI: EC: Look up EC in DSDT
[ 0.050000] ACPI: Interpreter enabled
[ 0.050000] ACPI: (supports S0 S3 S4 S5)
[ 0.050000] ACPI: Using IOAPIC for interrupt routing
[ 0.050000] ACPI: No dock devices found.
[ 0.050000] PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
[ 0.050000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.050000] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [mem
0xe0000000-0xfebfffff] (ignored)
[ 0.050000] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f]
[ 0.050000] pci 0000:00:01.2: reg 20: [io 0xc020-0xc03f]
[ 0.050000] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.050000] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.050925] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[ 0.051702] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff]
[ 0.054739] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref]
[ 0.054917] pci 0000:00:03.0: reg 10: [io 0xc040-0xc05f]
[ 0.054942] pci 0000:00:03.0: reg 14: [mem 0xf2020000-0xf2020fff]
[ 0.055015] pci 0000:00:03.0: reg 30: [mem 0xf2028000-0xf202ffff pref]
[ 0.055159] pci 0000:00:04.0: reg 10: [io 0xc400-0xc7ff]
[ 0.055181] pci 0000:00:04.0: reg 14: [io 0xc800-0xc8ff]
[ 0.055360] pci 0000:00:05.0: reg 10: [io 0xc900-0xc93f]
[ 0.055383] pci 0000:00:05.0: reg 14: [mem 0xf2030000-0xf2030fff]
[ 0.055858] pci 0000:00:06.0: reg 10: [mem 0xf2031000-0xf2031fff]
[ 0.056422] pci 0000:00:07.0: reg 10: [mem 0xf2032000-0xf2032fff]
[ 0.056672] pci 0000:00:08.0: reg 10: [io 0xc940-0xc95f]
[ 0.056931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.061318] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.061403] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.070090] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.080151] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.080335] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.080438] HEST: Table is not found!
[ 0.080836] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.080845] vgaarb: loaded
[ 0.081258] SCSI subsystem initialized
[ 0.081547] libata version 3.00 loaded.
[ 0.081691] usbcore: registered new interface driver usbfs
[ 0.081720] usbcore: registered new interface driver hub
[ 0.081790] usbcore: registered new device driver usb
[ 0.082091] ACPI: WMI: Mapper loaded
[ 0.082103] PCI: Using ACPI for IRQ routing
[ 0.082113] PCI: pci_cache_line_size set to 64 bytes
[ 0.082524] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.082534] reserve RAM buffer: 00000000dfffb000 - 00000000dfffffff
[ 0.082537] reserve RAM buffer: 0000000132300000 - 0000000133ffffff
[ 0.082834] NetLabel: Initializing
[ 0.082841] NetLabel: domain hash size = 128
[ 0.082843] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.082876] NetLabel: unlabeled traffic allowed by default
[ 0.082978] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.083025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.083033] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.090042] Switching to clocksource kvm-clock
[ 0.103915] AppArmor: AppArmor Filesystem Enabled
[ 0.103933] pnp: PnP ACPI init
[ 0.103954] ACPI: bus type pnp registered
[ 0.104560] pnp: PnP ACPI: found 6 devices
[ 0.104562] ACPI: ACPI bus type pnp unregistered
[ 0.110143] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.110145] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.110169] NET: Registered protocol family 2
[ 0.110341] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.111788] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.115247] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.115687] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.115689] TCP reno registered
[ 0.115699] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.115776] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.115926] NET: Registered protocol family 1
[ 0.115943] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.115977] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.115994] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.116056] pci 0000:00:02.0: Boot video device
[ 0.116106] PCI: CLS 0 bytes, default 64
[ 0.116125] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.116128] Placing 64MB software IO TLB between ffff880001e1e000 -
ffff880005e1e000
[ 0.116130] software IO TLB at phys 0x1e1e000 - 0x5e1e000
[ 0.116322] Scanning for low memory corruption every 60 seconds
[ 0.116468] audit: initializing netlink socket (disabled)
[ 0.116479] type=2000 audit(1298144570.110:1): initialized
[ 0.126217] Trying to unpack rootfs image as initramfs...
[ 0.142677] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.151052] VFS: Disk quotas dquot_6.5.2
[ 0.151097] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.151540] fuse init (API version 7.14)
[ 0.151604] msgmni has been set to 8468
[ 0.161418] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.161425] io scheduler noop registered
[ 0.161427] io scheduler deadline registered
[ 0.161451] io scheduler cfq registered (default)
[ 0.161520] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.161535] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.161658] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.161666] ACPI: Power Button [PWRF]
[ 0.161924] ACPI: acpi_idle registered with cpuidle
[ 0.162537] ERST: Table is not found!
[ 0.162652] Linux agpgart interface v0.103
[ 0.162665] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.162824] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.163676] brd: module loaded
[ 0.163998] loop: module loaded
[ 0.164118] ata_piix 0000:00:01.1: version 2.13
[ 0.164193] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.164346] scsi0 : ata_piix
[ 0.170137] scsi1 : ata_piix
[ 0.170170] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 0.170171] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 0.170343] Fixed MDIO Bus: probed
[ 0.170364] PPP generic driver version 2.4.2
[ 0.170396] tun: Universal TUN/TAP device driver, 1.6
[ 0.170398] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.170474] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.170485] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.170492] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.170673] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.170693] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level,
high) -> IRQ 11
[ 0.170710] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 0.170717] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.170752] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 0.170828] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
[ 0.170952] hub 1-0:1.0: USB hub found
[ 0.170958] hub 1-0:1.0: 2 ports detected
[ 0.171038] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.171531] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.171536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.171647] mice: PS/2 mouse device common for all mice
[ 0.171848] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 0.172066] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.172138] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.172223] device-mapper: uevent: version 1.0.3
[ 0.172301] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised:
dm-devel@redhat.com
[ 0.180317] device-mapper: multipath: version 1.1.1 loaded
[ 0.180323] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.190115] cpuidle: using governor ladder
[ 0.190117] cpuidle: using governor menu
[ 0.190299] TCP cubic registered
[ 0.190392] NET: Registered protocol family 10
[ 0.190642] lo: Disabled Privacy Extensions
[ 0.190756] NET: Registered protocol family 17
[ 0.190894] PM: Resume from disk failed.
[ 0.190913] registered taskstats version 1
[ 0.191081] Magic number: 15:103:749
[ 0.191102] tty ttyS0: hash matches
[ 0.191173] rtc_cmos 00:01: setting system clock to 2011-02-19 19:42:49 UTC
(1298144569)
[ 0.191178] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.191179] EDD information not available.
[ 0.313957] Freeing initrd memory: 10744k freed
[ 0.340473] ata2.01: NODEV after polling detection
[ 0.340702] ata2.00: ATAPI: QEMU DVD-ROM, 0.12.5, max UDMA/100
[ 0.341057] ata2.00: configured for MWDMA2
[ 0.341454] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.12
PQ: 0 ANSI: 5
[ 0.342606] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 0.342611] Uniform CD-ROM driver Revision: 3.20
[ 0.342696] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.342739] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 0.342778] Freeing unused kernel memory: 908k freed
[ 0.343102] Write protecting the kernel read-only data: 10240k
[ 0.343207] Freeing unused kernel memory: 412k freed
[ 0.343714] Freeing unused kernel memory: 1644k freed
[ 0.367821] udev[66]: starting version 163
[ 0.490070] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 0.512672] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.512698] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10
(level, high) -> IRQ 10
[ 0.512727] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.513104] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.513106] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10
(level, high) -> IRQ 10
[ 0.513124] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 0.513305] virtio-pci 0000:00:08.0: PCI INT A -> Link[LNKD] -> GSI 11
(level, high) -> IRQ 11
[ 0.513320] virtio-pci 0000:00:08.0: setting latency timer to 64
[ 0.517965] alloc irq_desc for 40 on node -1
[ 0.517967] alloc kstat_irqs on node -1
[ 0.517991] virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.517992] alloc irq_desc for 41 on node -1
[ 0.517993] alloc kstat_irqs on node -1
[ 0.518006] virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.532016] FDC 0 is a S82078B
[ 0.564799] vda: vda1 vda2 < vda5 >
[ 0.565988] alloc irq_desc for 42 on node -1
[ 0.565992] alloc kstat_irqs on node -1
[ 0.566037] virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.566041] alloc irq_desc for 43 on node -1
[ 0.566043] alloc kstat_irqs on node -1
[ 0.566076] virtio-pci 0000:00:03.0: irq 43 for MSI/MSI-X
[ 0.566080] alloc irq_desc for 44 on node -1
[ 0.566083] alloc kstat_irqs on node -1
[ 0.566117] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[ 0.672089] EXT4-fs (vda1): INFO: recovery required on readonly filesystem
[ 0.672092] EXT4-fs (vda1): write access will be enabled during recovery
[ 0.756882] EXT4-fs (vda1): orphan cleanup on readonly fs
[ 0.756897] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524633
[ 0.756941] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524632
[ 0.756946] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524631
[ 0.756950] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524630
[ 0.756954] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524629
[ 0.756957] EXT4-fs (vda1): 5 orphan inodes deleted
[ 0.756959] EXT4-fs (vda1): recovery complete
[ 0.757648] JBD: barrier-based sync failed on vda1-8 - disabling barriers
[ 0.775610] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 1.065716] Adding 1340412k swap on /dev/vda5. Priority:-1 extents:1
across:1340412k
[ 1.081351] udev[313]: starting version 163
[ 1.090049] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[ 1.330651] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100,
revision 0
[ 1.363116] type=1400 audit(1298144570.661:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient3" pid=511 comm="apparmor_parser"
[ 1.363451] type=1400 audit(1298144570.661:3): apparmor="STATUS"
operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action"
pid=511 comm="apparmor_parser"
[ 1.363630] type=1400 audit(1298144570.661:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=511 comm="apparmor_parser"
[ 1.370818] lp: driver loaded but no devices found
[ 1.411803] type=1400 audit(1298144570.711:5): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/ntpd" pid=542 comm="apparmor_parser"
[ 1.443977] IR NEC protocol handler initialized
[ 1.455486] saa7146: register extension 'budget_ci dvb'.
[ 1.475556] usbcore: registered new interface driver hiddev
[ 1.494165] IR RC5(x) protocol handler initialized
[ 1.497985] input: QEMU 0.12.5 QEMU USB Tablet as
/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
[ 1.498098] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01
Pointer [QEMU 0.12.5 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 1.498113] usbcore: registered new interface driver usbhid
[ 1.498115] usbhid: USB HID core driver
[ 1.530518] IR RC6 protocol handler initialized
[ 1.556661] IR JVC protocol handler initialized
[ 1.558141] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 1.558152] budget_ci dvb 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11
(level, high) -> IRQ 11
[ 1.558191] budget_ci dvb 0000:00:06.0: setting latency timer to 64
[ 1.558250] saa7146: found saa7146 @ mem ffffc9000183a000 (revision 1, irq
11) (0x13c2,0x1019).
[ 1.558254] saa7146 (0): dma buffer size 192512
[ 1.558256] DVB: registering new adapter (TT-Budget S2-3200 PCI)
[ 1.597796] IR Sony protocol handler initialized
[ 1.612193] lirc_dev: IR Remote Control driver registered, major 250
[ 1.613142] IR LIRC bridge handler initialized
[ 1.760097] Couldn't read from EEPROM: not there?
[ 1.793653] type=1400 audit(1298144571.091:6): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient3" pid=701
comm="apparmor_parser"
[ 1.793989] type=1400 audit(1298144571.091:7): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/NetworkManager/
m-dhcp-client.action"
pid=701 comm="apparmor_parser"
[ 1.794172] type=1400 audit(1298144571.091:8): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script"
pid=701 comm="apparmor_parser"
[ 1.813762] type=1400 audit(1298144571.111:9): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/mysqld" pid=706 comm="apparmor_parser"
[ 1.820146] Registered IR keymap rc-tt-1500
[ 1.820311] input: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:06.0/rc/rc0/input3
[ 1.820399] rc0: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:06.0/rc/rc0
[ 2.196440] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
[ 2.199724] type=1400 audit(1298144571.501:10): apparmor="STATUS"
operation="profile_replace" name="/usr/sbin/ntpd" pid=709
comm="apparmor_parser"
[ 2.461868] JBD: barrier-based sync failed on vda1-8 - disabling barriers
[ 2.622108] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 2.647887] JBD: barrier-based sync failed on vda1-8 - disabling barriers
[ 2.860139] _stb0899_read_s2reg ERR(1), Device=[0xf3fc], Base
address=[0x00000400], Offset=[0xf334], Status=-1
[ 2.960154] _stb0899_read_s2reg ERR(1), Device=[0xf3fc], Base
address=[0x00000400], Offset=[0xf33c], Status=-1
[ 3.060140] _stb0899_read_s2reg ERR(1), Device=[0xfafc], Base
address=[0x00000800], Offset=[0xfa2c], Status=-1
[ 3.160140] _stb0899_read_s2reg ERR(1), Device=[0xfafc], Base
address=[0x00000800], Offset=[0xfa34], Status=-1
[ 3.160948] stb0899_attach: Attaching STB0899
[ 3.164956] stb6100_attach: Attaching STB6100
[ 3.260217] frontend_init: No LNBP21 found!
[ 3.260237] budget-ci: A frontend driver was not found for device
[1131:7146]
subsystem [13c2:1019]
[ 3.260451] budget_ci dvb 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10
(level, high) -> IRQ 10
[ 3.260579] budget_ci dvb 0000:00:07.0: setting latency timer to 64
[ 3.260817] saa7146: found saa7146 @ mem ffffc90001830000 (revision 1, irq
10) (0x13c2,0x1019).
[ 3.260828] saa7146 (1): dma buffer size 192512
[ 3.260841] DVB: registering new adapter (TT-Budget S2-3200 PCI)
[ 3.470057] Couldn't read from EEPROM: not there?
[ 3.470535] Registered IR keymap rc-tt-1500
[ 3.470592] input: Budget-CI dvb ir receiver saa7146 (1) as
/devices/pci0000:00/0000:00:07.0/rc/rc1/input5
[ 3.470631] rc1: Budget-CI dvb ir receiver saa7146 (1) as
/devices/pci0000:00/0000:00:07.0/rc/rc1
[ 4.500077] _stb0899_read_s2reg ERR(1), Device=[0xf3fc], Base
address=[0x00000400], Offset=[0xf334], Status=-1
[ 4.600084] _stb0899_read_s2reg ERR(1), Device=[0xf3fc], Base
address=[0x00000400], Offset=[0xf33c], Status=-1
[ 4.700102] _stb0899_read_s2reg ERR(1), Device=[0xfafc], Base
address=[0x00000800], Offset=[0xfa2c], Status=-1
[ 4.800088] _stb0899_read_s2reg ERR(1), Device=[0xfafc], Base
address=[0x00000800], Offset=[0xfa34], Status=-1
[ 4.800894] stb0899_attach: Attaching STB0899
[ 4.801048] stb6100_attach: Attaching STB6100
[ 4.900190] frontend_init: No LNBP21 found!
[ 4.900204] budget-ci: A frontend driver was not found for device
[1131:7146]
subsystem [13c2:1019]
[ 4.900368] Intel ICH 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11
(level,high) -> IRQ 11
[ 4.900448] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 5.233183] saa7146 (0): unexpected i2c irq: isr e7fffbb7 psr ffffffff ssr
ffffffff
[ 5.233189] saa7146: interrupt_hw(): warning: interrupt enabled, but not
handled properly.(0xe7fcfbb7)
[ 5.233194] saa7146: interrupt_hw(): disabling interrupt source(s)!
[ 5.607824] saa7146 (0): unexpected i2c irq: isr e7fffbb7 psr ffffffff ssr
ffffffff
[ 5.607827] saa7146: interrupt_hw(): warning: interrupt enabled, but not
handled properly.(0xe7fcfbb7)
[ 5.607830] saa7146: interrupt_hw(): disabling interrupt source(s)!
[ 5.982592] saa7146 (0): unexpected i2c irq: isr e7fffbb7 psr ffffffff ssr
ffffffff
[ 5.982595] saa7146: interrupt_hw(): warning: interrupt enabled, but not
handled properly.(0xe7fcfbb7)
[ 5.982597] saa7146: interrupt_hw(): disabling interrupt source(s)!
[ 6.355018] saa7146 (0): unexpected i2c irq: isr e7fffbb7 psr ffffffff ssr
ffffffff
[ 6.355020] saa7146: interrupt_hw(): warning: interrupt enabled, but not
handled properly.(0xe7fcfbb7)
[ 6.355022] saa7146: interrupt_hw(): disabling interrupt source(s)!
>>> filtered for the frontend Problem:
virtual-machine:/dev/dvb/adapter0$ dmesg | grep frontend
[ 3.260217] frontend_init: No LNBP21 found!
[ 3.260237] budget-ci: A frontend driver was not found for device
[1131:7146] subsystem [13c2:1019]
[ 4.900190] frontend_init: No LNBP21 found!
[ 4.900204] budget-ci: A frontend driver was not found for device
[1131:7146] subsystem [13c2:1019]
-------------------------------------------------------------------------------
with only one card i get it working and i am able to scan the satellites:
[ 29.024740] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
dmesg with only one card - WORKING:
virtual-machine:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-25-generic (buildd@crested) (gcc version
4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC
2011 (Ubuntu 2.6.35-25.44-generic 2.6.35.10)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic
root=UUID=58eb9e81-3bc6-4266-ad52-8030a004f4ba ro quiet splash
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffb000 (usable)
[ 0.000000] BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000132300000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable)
==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x132300 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00E0000000 mask FFE0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] last_pfn = 0xdfffb max_arch_pfn = 0x400000000
[ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable)
==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000dfffb000 (usable)
[ 0.000000] modified: 00000000dfffb000 - 00000000e0000000 (reserved)
[ 0.000000] modified: 00000000fffbc000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000132300000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000f8880] f8880
[ 0.000000] init_memory_mapping: 0000000000000000-00000000dfffb000
[ 0.000000] 0000000000 - 00dfe00000 page 2M
[ 0.000000] 00dfe00000 - 00dfffb000 page 4k
[ 0.000000] kernel direct mapping tables up to dfffb000 @ 16000-1c000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000132300000
[ 0.000000] 0100000000 - 0132200000 page 2M
[ 0.000000] 0132200000 - 0132300000 page 4k
[ 0.000000] kernel direct mapping tables up to 132300000 @ 1a000-21000
[ 0.000000] RAMDISK: 37572000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f8830 00014 (v00 BOCHS )
[ 0.000000] ACPI: RSDT 00000000dfffdd90 00034 (v01 BOCHS BXPCRSDT 00000001
BXPC 00000001)
[ 0.000000] ACPI: FACP 00000000dffffe70 00074 (v01 BOCHS BXPCFACP 00000001
BXPC 00000001)
[ 0.000000] ACPI: DSDT 00000000dfffdf30 01EC4 (v01 BXPC BXDSDT 00000001
INTL 20100528)
[ 0.000000] ACPI: FACS 00000000dffffe00 00040
[ 0.000000] ACPI: SSDT 00000000dfffdef0 00037 (v01 BOCHS BXPCSSDT 00000001
BXPC 00000001)
[ 0.000000] ACPI: APIC 00000000dfffde10 00072 (v01 BOCHS BXPCAPIC 00000001
BXPC 00000001)
[ 0.000000] ACPI: HPET 00000000dfffddd0 00038 (v01 BOCHS BXPCHPET 00000001
BXPC 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000132300000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000132300000
[ 0.000000] NODE_DATA [0000000100000000 - 0000000100004fff]
[ 0.000000] kvm-clock: Using msrs 12 and 11
[ 0.000000] kvm-clock: cpu 0, msr 0:1aeb901, boot clock
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD ->
[ffff880100200000-ffff8801041fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00132300
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfffb
[ 0.000000] 0: 0x00100000 -> 0x00132300
[ 0.000000] On node 0 totalpages: 1122954
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3927 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 899123 pages, LIFO batch:31
[ 0.000000] Normal zone: 2811 pages used for memmap
[ 0.000000] Normal zone: 202757 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff]
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000fffbc000
[ 0.000000] PM: Registered nosave memory: 00000000fffbc000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at e0000000 (gap:
e0000000:1ffbc000)
[ 0.000000] Booting paravirtualized kernel on KVM
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001e00000 s91520 r8192
d23168 u2097152
[ 0.000000] pcpu-alloc: s91520 r8192 d23168 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] kvm-clock: cpu 0, msr 0:1e15901, primary cpu clock
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total
pages: 1105807
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-25-generic
root=UUID=58eb9e81-3bc6-4266-ad52-8030a004f4ba ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Subtract (49 early reservations)
[ 0.000000] #1 [0001000000 - 0001d17114] TEXT DATA BSS
[ 0.000000] #2 [0037572000 - 0037ff0000] RAMDISK
[ 0.000000] #3 [0001d18000 - 0001d18071] BRK
[ 0.000000] #4 [000009f000 - 00000f8880] BIOS reserved
[ 0.000000] #5 [00000f8880 - 00000f8890] MP-table mpf
[ 0.000000] #6 [00000f8990 - 0000100000] BIOS reserved
[ 0.000000] #7 [00000f8890 - 00000f8990] MP-table mpc
[ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #10 [0000016000 - 000001a000] PGTABLE
[ 0.000000] #11 [000001a000 - 000001c000] PGTABLE
[ 0.000000] #12 [0100000000 - 0100005000] NODE_DATA
[ 0.000000] #13 [0001d18080 - 0001d19080] BOOTMEM
[ 0.000000] #14 [0001d17140 - 0001d17488] BOOTMEM
[ 0.000000] #15 [0100005000 - 0100006000] BOOTMEM
[ 0.000000] #16 [0100006000 - 0100007000] BOOTMEM
[ 0.000000] #17 [0100200000 - 0104200000] MEMMAP 0
[ 0.000000] #18 [0001d174c0 - 0001d17640] BOOTMEM
[ 0.000000] #19 [0001d19080 - 0001d31080] BOOTMEM
[ 0.000000] #20 [0001d31080 - 0001d37080] BOOTMEM
[ 0.000000] #21 [0001d38000 - 0001d39000] BOOTMEM
[ 0.000000] #22 [0001d17640 - 0001d17681] BOOTMEM
[ 0.000000] #23 [0001d176c0 - 0001d17703] BOOTMEM
[ 0.000000] #24 [0001d17740 - 0001d17900] BOOTMEM
[ 0.000000] #25 [0001d17900 - 0001d17968] BOOTMEM
[ 0.000000] #26 [0001d17980 - 0001d179e8] BOOTMEM
[ 0.000000] #27 [0001d17a00 - 0001d17a68] BOOTMEM
[ 0.000000] #28 [0001d17a80 - 0001d17ae8] BOOTMEM
[ 0.000000] #29 [0001d17b00 - 0001d17b68] BOOTMEM
[ 0.000000] #30 [0001d17b80 - 0001d17be8] BOOTMEM
[ 0.000000] #31 [0001d17c00 - 0001d17c68] BOOTMEM
[ 0.000000] #32 [0001d17c80 - 0001d17ca0] BOOTMEM
[ 0.000000] #33 [0001d17cc0 - 0001d17ce0] BOOTMEM
[ 0.000000] #34 [0001d17d00 - 0001d17d6a] BOOTMEM
[ 0.000000] #35 [0001d17d80 - 0001d17dea] BOOTMEM
[ 0.000000] #36 [0001e00000 - 0001e1e000] BOOTMEM
[ 0.000000] #37 [0001d17e00 - 0001d17e08] BOOTMEM
[ 0.000000] #38 [0001d17e40 - 0001d17e48] BOOTMEM
[ 0.000000] #39 [0001d17e80 - 0001d17e84] BOOTMEM
[ 0.000000] #40 [0001d17ec0 - 0001d17ec8] BOOTMEM
[ 0.000000] #41 [0001d37080 - 0001d371d0] BOOTMEM
[ 0.000000] #42 [0001d17f00 - 0001d17f80] BOOTMEM
[ 0.000000] #43 [0001d17f80 - 0001d18000] BOOTMEM
[ 0.000000] #44 [0001d39000 - 0001d41000] BOOTMEM
[ 0.000000] #45 [0001e1e000 - 0005e1e000] BOOTMEM
[ 0.000000] #46 [0001d41000 - 0001d61000] BOOTMEM
[ 0.000000] #47 [0001d61000 - 0001da1000] BOOTMEM
[ 0.000000] #48 [000001c800 - 0000024800] BOOTMEM
[ 0.000000] Memory: 4335812k/5016576k available (5714k kernel code, 524760k
absent, 156004k reserved, 5377k data, 908k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=1,
Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 45875200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want
memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Detected 3324.678 MHz processor.
[ 0.010000] Calibrating delay loop (skipped) preset value.. 6649.35 BogoMIPS
(lpj=33246780)
[ 0.010000] pid_max: default: 32768 minimum: 301
[ 0.010000] Security Framework initialized
[ 0.010000] AppArmor: AppArmor initialized
[ 0.010000] Yama: becoming mindful.
[ 0.010000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.010000] Mount-cache hash table entries: 256
[ 0.010000] Initializing cgroup subsys ns
[ 0.010000] Initializing cgroup subsys cpuacct
[ 0.010000] Initializing cgroup subsys memory
[ 0.010000] Initializing cgroup subsys devices
[ 0.010000] Initializing cgroup subsys freezer
[ 0.010000] Initializing cgroup subsys net_cls
[ 0.010013] mce: CPU supports 10 MCE banks
[ 0.010056] Performance Events: unsupported p6 CPU model 2 no PMU driver,
software events only.
[ 0.010245] SMP alternatives: switching to UP code
[ 0.032015] Freeing SMP alternatives: 24k freed
[ 0.032041] ACPI: Core revision 20100428
[ 0.033733] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.033739] ftrace: allocating 22681 entries in 89 pages
[ 0.040085] Setting APIC routing to flat
[ 0.041000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.041003] CPU0: Intel QEMU Virtual CPU version 0.12.5 stepping 03
[ 0.050000] Brought up 1 CPUs
[ 0.050000] Total of 1 processors activated (6649.35 BogoMIPS).
[ 0.050000] devtmpfs: initialized
[ 0.050000] regulator: core version 0.5
[ 0.050000] Time: 21:12:25 Date: 02/19/11
[ 0.050000] NET: Registered protocol family 16
[ 0.050000] ACPI: bus type pci registered
[ 0.050000] PCI: Using configuration type 1 for base access
[ 0.050000] bio: create slab <bio-0> at 0
[ 0.050000] ACPI: EC: Look up EC in DSDT
[ 0.050000] ACPI: Interpreter enabled
[ 0.050000] ACPI: (supports S0 S3 S4 S5)
[ 0.050000] ACPI: Using IOAPIC for interrupt routing
[ 0.050000] ACPI: No dock devices found.
[ 0.050000] PCI: Ignoring host bridge windows from ACPI; if necessary, use
"pci=use_crs" and report a bug
[ 0.050000] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.050000] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.050000] pci_root PNP0A03:00: host bridge window [mem
0xe0000000-0xfebfffff] (ignored)
[ 0.050000] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f]
[ 0.050000] pci 0000:00:01.2: reg 20: [io 0xc020-0xc03f]
[ 0.050000] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
[ 0.050000] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
[ 0.050000] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
[ 0.050680] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff]
[ 0.053703] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref]
[ 0.053893] pci 0000:00:03.0: reg 10: [io 0xc040-0xc05f]
[ 0.053919] pci 0000:00:03.0: reg 14: [mem 0xf2020000-0xf2020fff]
[ 0.053991] pci 0000:00:03.0: reg 30: [mem 0xf2028000-0xf202ffff pref]
[ 0.054150] pci 0000:00:04.0: reg 10: [io 0xc400-0xc7ff]
[ 0.054171] pci 0000:00:04.0: reg 14: [io 0xc800-0xc8ff]
[ 0.054350] pci 0000:00:05.0: reg 10: [io 0xc900-0xc93f]
[ 0.054375] pci 0000:00:05.0: reg 14: [mem 0xf2030000-0xf2030fff]
[ 0.054864] pci 0000:00:06.0: reg 10: [mem 0xf2031000-0xf2031fff]
[ 0.055153] pci 0000:00:07.0: reg 10: [io 0xc940-0xc95f]
[ 0.055405] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.058018] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[ 0.058100] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.060129] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.060215] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[ 0.060299] ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
[ 0.060363] HEST: Table is not found!
[ 0.060568] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.060572] vgaarb: loaded
[ 0.060736] SCSI subsystem initialized
[ 0.060859] libata version 3.00 loaded.
[ 0.060914] usbcore: registered new interface driver usbfs
[ 0.060925] usbcore: registered new interface driver hub
[ 0.060958] usbcore: registered new device driver usb
[ 0.061092] ACPI: WMI: Mapper loaded
[ 0.061097] PCI: Using ACPI for IRQ routing
[ 0.061101] PCI: pci_cache_line_size set to 64 bytes
[ 0.061255] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.061259] reserve RAM buffer: 00000000dfffb000 - 00000000dfffffff
[ 0.061260] reserve RAM buffer: 0000000132300000 - 0000000133ffffff
[ 0.061379] NetLabel: Initializing
[ 0.061382] NetLabel: domain hash size = 128
[ 0.061383] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.061395] NetLabel: unlabeled traffic allowed by default
[ 0.061437] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.061455] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.061458] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[ 0.080036] Switching to clocksource kvm-clock
[ 0.088177] AppArmor: AppArmor Filesystem Enabled
[ 0.088203] pnp: PnP ACPI init
[ 0.088224] ACPI: bus type pnp registered
[ 0.088851] pnp: PnP ACPI: found 6 devices
[ 0.088853] ACPI: ACPI bus type pnp unregistered
[ 0.094481] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.094484] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
[ 0.094515] NET: Registered protocol family 2
[ 0.094690] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.095933] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.099355] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.099799] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.099801] TCP reno registered
[ 0.099812] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.099898] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.100072] NET: Registered protocol family 1
[ 0.100089] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.100113] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.100130] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.100199] pci 0000:00:02.0: Boot video device
[ 0.100240] PCI: CLS 0 bytes, default 64
[ 0.100257] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.100260] Placing 64MB software IO TLB between ffff880001e1e000 -
ffff880005e1e000
[ 0.100262] software IO TLB at phys 0x1e1e000 - 0x5e1e000
[ 0.100459] Scanning for low memory corruption every 60 seconds
[ 0.100609] audit: initializing netlink socket (disabled)
[ 0.100626] type=2000 audit(1298149947.100:1): initialized
[ 0.110370] Trying to unpack rootfs image as initramfs...
[ 0.130254] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.131175] VFS: Disk quotas dquot_6.5.2
[ 0.131216] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.140277] fuse init (API version 7.14)
[ 0.140368] msgmni has been set to 8468
[ 0.142503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.142511] io scheduler noop registered
[ 0.142512] io scheduler deadline registered
[ 0.142536] io scheduler cfq registered (default)
[ 0.142604] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.142618] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.142736] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.142744] ACPI: Power Button [PWRF]
[ 0.142992] ACPI: acpi_idle registered with cpuidle
[ 0.143584] ERST: Table is not found!
[ 0.143683] Linux agpgart interface v0.103
[ 0.143701] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.143852] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.144712] brd: module loaded
[ 0.145035] loop: module loaded
[ 0.145156] ata_piix 0000:00:01.1: version 2.13
[ 0.145231] ata_piix 0000:00:01.1: setting latency timer to 64
[ 0.150073] scsi0 : ata_piix
[ 0.150167] scsi1 : ata_piix
[ 0.150189] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
[ 0.150190] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
[ 0.150371] Fixed MDIO Bus: probed
[ 0.150393] PPP generic driver version 2.4.2
[ 0.150435] tun: Universal TUN/TAP device driver, 1.6
[ 0.150436] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.150511] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.150523] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.150529] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.150716] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.150735] uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level,
high) -> IRQ 11
[ 0.150753] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 0.150759] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 0.150795] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 0.150874] uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c020
[ 0.151001] hub 1-0:1.0: USB hub found
[ 0.151006] hub 1-0:1.0: 2 ports detected
[ 0.151088] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.151575] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.151581] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.151687] mice: PS/2 mouse device common for all mice
[ 0.151891] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 0.152116] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.152192] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[ 0.152290] device-mapper: uevent: version 1.0.3
[ 0.160345] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised:
dm-devel@redhat.com
[ 0.160729] device-mapper: multipath: version 1.1.1 loaded
[ 0.160735] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.170094] cpuidle: using governor ladder
[ 0.170096] cpuidle: using governor menu
[ 0.170283] TCP cubic registered
[ 0.170375] NET: Registered protocol family 10
[ 0.170640] lo: Disabled Privacy Extensions
[ 0.170759] NET: Registered protocol family 17
[ 0.170898] PM: Resume from disk failed.
[ 0.170917] registered taskstats version 1
[ 0.171078] Magic number: 15:797:247
[ 0.171168] rtc_cmos 00:01: setting system clock to 2011-02-19 21:12:26 UTC
(1298149946)
[ 0.171171] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.171172] EDD information not available.
[ 0.296603] Freeing initrd memory: 10744k freed
[ 0.320540] ata2.01: NODEV after polling detection
[ 0.320769] ata2.00: ATAPI: QEMU DVD-ROM, 0.12.5, max UDMA/100
[ 0.321150] ata2.00: configured for MWDMA2
[ 0.321567] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.12
PQ: 0 ANSI: 5
[ 0.322756] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 0.322761] Uniform CD-ROM driver Revision: 3.20
[ 0.322854] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.322903] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 0.322946] Freeing unused kernel memory: 908k freed
[ 0.323233] Write protecting the kernel read-only data: 10240k
[ 0.323353] Freeing unused kernel memory: 412k freed
[ 0.323570] Freeing unused kernel memory: 1644k freed
[ 0.340251] udev[66]: starting version 163
[ 0.459148] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.459172] virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10
(level, high) -> IRQ 10
[ 0.459194] virtio-pci 0000:00:03.0: setting latency timer to 64
[ 0.465102] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[ 0.465107] virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10
(level, high) -> IRQ 10
[ 0.465130] virtio-pci 0000:00:05.0: setting latency timer to 64
[ 0.465408] virtio-pci 0000:00:07.0: PCI INT A -> Link[LNKC] -> GSI 10
(level, high) -> IRQ 10
[ 0.465424] virtio-pci 0000:00:07.0: setting latency timer to 64
[ 0.470080] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 0.475220] alloc irq_desc for 40 on node -1
[ 0.475223] alloc kstat_irqs on node -1
[ 0.475244] virtio-pci 0000:00:05.0: irq 40 for MSI/MSI-X
[ 0.475245] alloc irq_desc for 41 on node -1
[ 0.475246] alloc kstat_irqs on node -1
[ 0.475259] virtio-pci 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.505072] FDC 0 is a S82078B
[ 0.505658] vda: vda1 vda2 < vda5 >
[ 0.506201] alloc irq_desc for 42 on node -1
[ 0.506203] alloc kstat_irqs on node -1
[ 0.506221] virtio-pci 0000:00:03.0: irq 42 for MSI/MSI-X
[ 0.506223] alloc irq_desc for 43 on node -1
[ 0.506224] alloc kstat_irqs on node -1
[ 0.506235] virtio-pci 0000:00:03.0: irq 43 for MSI/MSI-X
[ 0.506237] alloc irq_desc for 44 on node -1
[ 0.506238] alloc kstat_irqs on node -1
[ 0.506249] virtio-pci 0000:00:03.0: irq 44 for MSI/MSI-X
[ 0.841106] EXT4-fs (vda1): INFO: recovery required on readonly filesystem
[ 0.841111] EXT4-fs (vda1): write access will be enabled during recovery
[ 0.892224] usbcore: registered new interface driver hiddev
[ 0.913548] input: QEMU 0.12.5 QEMU USB Tablet as
/devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input2
[ 0.913694] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01
Pointer [QEMU 0.12.5 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
[ 0.913846] usbcore: registered new interface driver usbhid
[ 0.913848] usbhid: USB HID core driver
[ 11.288098] EXT4-fs (vda1): orphan cleanup on readonly fs
[ 11.288130] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
526759
[ 11.288428] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
525178
[ 11.288455] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524633
[ 11.288469] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524632
[ 11.288480] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524631
[ 11.288492] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524630
[ 11.288503] EXT4-fs (vda1): ext4_orphan_cleanup: deleting unreferenced inode
524629
[ 11.288513] EXT4-fs (vda1): 7 orphan inodes deleted
[ 11.288517] EXT4-fs (vda1): recovery complete
[ 11.319113] JBD: barrier-based sync failed on vda1-8 - disabling barriers
[ 11.574501] EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 28.064829] udev[294]: starting version 163
[ 28.189019] Adding 1340412k swap on /dev/vda5. Priority:-1 extents:1
across:1340412k
[ 28.211614] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
[ 28.285895] lp: driver loaded but no devices found
[ 28.352237] type=1400 audit(1298149974.674:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient3" pid=481 comm="apparmor_parser"
[ 28.352549] type=1400 audit(1298149974.674:3): apparmor="STATUS"
operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action"
pid=481 comm="apparmor_parser"
[ 28.352720] type=1400 audit(1298149974.674:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=481
comm="apparmor_parser"
[ 28.379665] type=1400 audit(1298149974.694:5): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/ntpd" pid=529 comm="apparmor_parser"
[ 28.402020] IR NEC protocol handler initialized
[ 28.427840] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro
[ 28.455051] saa7146: register extension 'budget_ci dvb'.
[ 28.500317] IR RC5(x) protocol handler initialized
[ 28.530283] IR RC6 protocol handler initialized
[ 28.546606] IR JVC protocol handler initialized
[ 28.553373] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 28.553387] budget_ci dvb 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11
(level, high) -> IRQ 11
[ 28.553489] saa7146: found saa7146 @ mem ffffc900017ba000 (revision 1, irq
11) (0x13c2,0x1019).
[ 28.553495] saa7146 (0): dma buffer size 192512
[ 28.553499] DVB: registering new adapter (TT-Budget S2-3200 PCI)
[ 28.561480] IR Sony protocol handler initialized
[ 28.598268] lirc_dev: IR Remote Control driver registered, major 250
[ 28.599474] IR LIRC bridge handler initialized
[ 28.645237] adapter has MAC addr = 00:d0:5c:68:22:e7
[ 28.694006] Registered IR keymap rc-tt-1500
[ 28.694281] input: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:06.0/rc/rc0/input3
[ 28.694456] rc0: Budget-CI dvb ir receiver saa7146 (0) as
/devices/pci0000:00/0000:00:06.0/rc/rc0
[ 28.834269] type=1400 audit(1298149975.154:6): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient3" pid=693 comm="apparmor_parser"
[ 28.834689] type=1400 audit(1298149975.154:7): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action"
pid=693 comm="apparmor_parser"
[ 28.834936] type=1400 audit(1298149975.154:8): apparmor="STATUS"
operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script"
pid=693 comm="apparmor_parser"
[ 28.874125] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input4
[ 28.878398] type=1400 audit(1298149975.194:9): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/mysqld" pid=698 comm="apparmor_parser"
[ 28.886916] type=1400 audit(1298149975.204:10): apparmor="STATUS"
operation="profile_replace" name="/usr/sbin/ntpd" pid=702 comm="apparmor_parser"
[ 28.891401] type=1400 audit(1298149975.214:11): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/tcpdump" pid=705 comm="apparmor_parser"
[ 29.020971] stb0899_attach: Attaching STB0899
[ 29.022779] stb6100_attach: Attaching STB6100
[ 29.024724] LNBx2x attached on addr=8
[ 29.024740] DVB: registering adapter 0 frontend 0 (STB0899 Multistandard)...
[ 29.025403] Intel ICH 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level,
high) -> IRQ 11
[ 29.025466] Intel ICH 0000:00:04.0: setting latency timer to 64
[ 29.360264] intel8x0_measure_ac97_clock: measured 56773 usecs (4624 samples)
[ 29.360266] intel8x0: measured clock 81447 rejected
[ 29.730119] intel8x0_measure_ac97_clock: measured 59967 usecs (4830 samples)
[ 29.730121] intel8x0: measured clock 80544 rejected
[ 30.100173] intel8x0_measure_ac97_clock: measured 59837 usecs (4805 samples)
[ 30.100179] intel8x0: measured clock 80301 rejected
[ 30.100215] intel8x0: clocking to 48000
[ 31.392147] JBD: barrier-based sync failed on vda1-8 - disabling barriers
[ 32.079085] EXT4-fs (vda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 32.173516] JBD: barrier-based sync failed on vda1-8 - disabling barriers
[ 39.480086] eth0: no IPv6 routers present
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM)
2011-02-19 22:53 Da Powah
@ 2011-02-20 1:16 ` Da Powah
0 siblings, 0 replies; 7+ messages in thread
From: Da Powah @ 2011-02-20 1:16 UTC (permalink / raw)
To: kvm
> Hi Alex,
>
> i got some more output and i am getting closer: i installed mythbuntu as vm and
> tested with both cards and with one only card via passthrough. One card
> assembled works nice, two cards assembled gives me an error: there is no
> frontend0 found in '/dev/dvb/adapter0/frontend0'. A look into both dmesg and a
> diff shows, that there is a change in the IRQ Number (10->11) and the eeprom of
> the device couldnt be read. I am not able to take a conclusion of that - maybe
> you can give me one more hint.
>
> I will try tomorrow to use both devices on 'bare metal' to make sure it is
> working in this configuration. More infos will come.
[....]
Hi Alex,
i tested on 'bare metal' and it worked - i was able to run a scan on both cards
and '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter1/frontend0' are
available. But the time i rund MythBuntu or any other vm with both cards passed
through, something goes wrong.
I`ve got 3 PCI slots behind that PCIe2PCI bridge and i swapped the cards among
them - it has no effect.
So i assume it depends on the kvm / kernel...
Some other suggestions ?
Kind Regards,
DP
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM)
2011-02-16 23:24 ` Alex Williamson
2011-02-17 19:39 ` Da Powah
2011-02-17 21:14 ` Da Powah
@ 2011-02-22 11:48 ` Da Powah
2 siblings, 0 replies; 7+ messages in thread
From: Da Powah @ 2011-02-22 11:48 UTC (permalink / raw)
To: kvm
Alex Williamson <alex.williamson <at> redhat.com> writes:
>
> On Tue, 2011-02-15 at 20:57 +0000, Da Powah wrote:
> > Hi,
> >
> > i`ve got a question about pci passthrogh of 2 pci devices (2x DVB-S2
> > PCI cards with Saa7146 PCI Bridge from Technotrend: S2-3200).
> >
> > I am using squeeze with a 2.6.37 selfcompiled Kernel. I want to
> > passthrough both devices to a virtual machine (Win7) an get problems.
> > If i passthrough one device (other is unplugged) it works flawlessly.
>
>[...]
Hi Alex,
i answered in the wrong branch - i am sorry for that.
Please take a look into
http://thread.gmane.org/gmane.comp.emulators.kvm.devel/68049.
It seems to be an IRQ Problem, which relies in kvm/qemu 0.12.5.
I did not find a hint, that this is solved in newer versions. Maybe you can
point me in the correct direction to solve the IRQ issue, which isn`t there on
'bare metal'.
Kind regards,
DP
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-02-22 11:48 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-15 20:57 Passthrough of 2 PCI devices works 80% (Kernel 2.6.37, Debian Squeeze, Win7 VM) Da Powah
2011-02-16 23:24 ` Alex Williamson
2011-02-17 19:39 ` Da Powah
2011-02-17 21:14 ` Da Powah
2011-02-22 11:48 ` Da Powah
-- strict thread matches above, loose matches on Subject: below --
2011-02-19 22:53 Da Powah
2011-02-20 1:16 ` Da Powah
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox