Re: PCI Passthrough, error: The driver 'pci-stub' is occupying your device 0000:08:06.2

[Alex Williamson <alex.williamson@redhat.com>]

On Mon, 2011-02-21 at 20:31 +0000, James Neave wrote:
> On Mon, Feb 14, 2011 at 5:48 PM, Alex Williamson
> <alex.williamson@redhat.com> wrote:
> > On Sat, 2011-02-12 at 16:04 +0000, James Neave wrote:
> >> On Tue, Feb 8, 2011 at 10:17 AM, James Neave <roboj1m@gmail.com> wrote:
> >> > On Tue, Feb 8, 2011 at 9:59 AM, Kenni Lund <kenni@kelu.dk> wrote:
> >> >> 2011/2/7 Daniel P. Berrange <berrange@redhat.com>:
> >> >>> On Sat, Feb 05, 2011 at 04:34:01PM +0000, James Neave wrote:
> >> >>>> Hi,
> >> >>>>
> >> >>>> I'm trying to pass a NOVA-T-500 TV Tuner card through to a gust VM.
> >> >>>> I'm getting the error "The driver 'pci-stub' is occupying your device
> >> >>>> 0000:08:06.2"
> >> >>>
> >> >>> This is a rather misleading error message. It is *expected* that
> >> >>> pci-stub will occupy the device. Unfortunately the rest of the
> >> >>> error messages QEMU is printing aren't much help either, but
> >> >>> ultimately something is returning -EBUSY in the PCI device assign
> >> >>> step
> >> >>
> >> >> James, as far as I remember, I had the same issue when I set up my
> >> >> system. Looking at my current (working) boot-script, apparently I've
> >> >> added a 4th line which removes the pci-stub again as a
> >> >> workaround....and it works:
> >> >>
> >> >> echo "4444 0016" > /sys/bus/pci/drivers/pci-stub/new_id
> >> >> echo "0000:04:08.0" > /sys/bus/pci/drivers/ivtv/unbind
> >> >> echo "0000:04:08.0" > /sys/bus/pci/drivers/pci-stub/bind
> >> >> echo "4444 0016" > /sys/bus/pci/drivers/pci-stub/remove_id
> >> >>
> >> >> Best regards
> >> >> Kenni
> >> >>
> >> >
> >> > Hi Kenni,
> >> >
> >> > Can I get a bit more information on "boot-script" please? Which file
> >> > exaclty have you put this in? Did you write your own service script
> >> > and put it in init.d?
> >> >
> >> > I've tried this:
> >> >
> >> > echo "8086 10b9" > /sys/bus/pci/drivers/pci-stub/new_id
> >> > echo 0000:01:00.0 > /sys/bus/pci/devices/0000:01:00.0/driver/unbind
> >> > echo 0000:01:00.0 > /sys/bus/pci/drivers/pci-stub/bind
> >> >
> >> > I'll try it again with the fourth line added, manually before I start the VM.
> >> >
> >> > How come yours is 'echo "PCI" > /sys/bus/drivers/DRIVERNAME/unbind'
> >> > and mine is echo "PCI" > /sys/bus/pci/devices/PCI/driver/unbind
> >> >
> >> > Obviously one looks up which driver is being used by the PCI id, but
> >> > how do I look up which driver my PCI card is using?
> >> >
> >> > Thanks,
> >> >
> >> > James.
> >> >
> >>
> >> Hi,
> >>
> >> OK, adding the fourth line does nothing, changing the second line to
> >> "driver" rather than "device" does nothing, including in combination
> >> with fourth line there/not there.
> >
> > Yep, the last line is just removing the id from pci-stub, it doesn't
> > change anything about devices that are already bound to it.  driver vs
> > device are just different ways to get to the same thing.
> >
> >> So I'm still stuck, can anybody else help?
> >> Perhaps point me to a guide on how to compile the latest qemu-kvm
> >> against my kernel?
> >
> > I don't know why you're getting -EBUSY for this device, but maybe we can
> > start from a clean slate and see if it helps.  Here's what I would
> > suggest:
> >
> > echo "0000:08:06.0" > /sys/bus/pci/devices/0000:08:06.0/driver/unbind
> > echo "0000:08:06.1" > /sys/bus/pci/devices/0000:08:06.1/driver/unbind
> > echo "0000:08:06.2" > /sys/bus/pci/devices/0000:08:06.2/driver/unbind
> > echo "0000:08:0e.0" > /sys/bus/pci/devices/0000:08:0e.0/driver/unbind
> >
> > Note we have to knock out the firewire because it shares an interrupt
> > with the ehci device you're trying to assign.  We want to remove the USB
> > controller entirely from the host.  Your dmesg indicates the host is
> > still seeing the device via the uhci ports, and isn't happy about it.
> > You can ignore pci-stub for the moment, it's just a way to keep drivers
> > from claiming the device, it's not required for device assignment.  Now,
> > instead of only trying to assign the ehci, let's move the whole usb
> > controller to the guest:
> >
> > -device pci-assign,host=08:06.0,addr=5.0 \
> > -device pci-assign,host=08:06.1,addr=5.1 \
> > -device pci-assign,host=08:06.2,addr=5.2
> >
> > (slot 5 on the guest is arbitrary, pick something else if you need to)
> > If that works, then you can bind all those devices to pci-stub and it
> > should still work.
> >
> > Alex
> 
> Hi,
> 
> Sorry about the slow reply, I hosed all of my PCs fiddling with
> compiling the latest qemu, took me a while to put it all back together
> again in between work!
> 
> I'm afraid I use virtmanager, although I guess using the "add pci
> device" function is the same as -device pci-assign? It does seem to
> add it to the command line that gets written out to the log files in
> /var/log/libvirt/qemu.
> 
> Nevertheless, I've tried that and still not luck, the log output is
> similar, with one extra line:
> 
> http://pastebin.com/MJ6aqjNq

You actually ended up with:

-device pci-assign,host=08:06.0,id=hostdev0,configfd=58,bus=pci.0,addr=0x6 \
-device pci-assign,host=08:06.1,id=hostdev1,configfd=59,bus=pci.0,addr=0x7 \
-device pci-assign,host=08:06.2,id=hostdev2,configfd=60,bus=pci.0,addr=0x8

Which isn't quite what I was suggesting.  You probably have xml that
looks like this:

    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0000' bus='0x08' slot='0x06' function='0x0'/>
      </source>
    </hostdev>
    ...

Try adding an address line, so you get something more like this:

    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0000' bus='0x08' slot='0x06' function='0x0'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
    </hostdev>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0000' bus='0x08' slot='0x06' function='0x1'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x1'/>
    </hostdev>
    <hostdev mode='subsystem' type='pci' managed='yes'>
      <source>
        <address domain='0x0000' bus='0x08' slot='0x06' function='0x2'/>
      </source>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x2'/>
    </hostdev>


> Using raw in/out ioport access (sysfs - Input/output error)

This is just an informational line to let us know whether pci-sysfs
supports read/write on the ioport resource files.  If it does, we use
those rather than doing raw in/out for access to the device.  This does
highlight another potential problem.  Your distro probably doesn't have
all the patches in place for non-privileged device assignment, which
could be why you're having strange issues.  Check
your /etc/libvirt/qemu.conf for the 'user =' and 'group =' lines.  If
they're not already, try setting them to 'root', restart libvirtd and
see if anything improves.

> Here's the dmesg output:
> http://pastebin.com/AE1euUN1

If still issues after the above, it might be useful to pastbin the
entire dmesg so we can make sure the iommu is really on.  Thanks,

Alex