From: Alex Williamson <alex.williamson@redhat.com>
To: "Michael S. Tsirkin" <mst@redhat.com>
Cc: kvm@vger.kernel.org, jan.kiszka@siemens.com, shashidhar.patil@gmail.com
Subject: Re: [PATCH 4/9] pci-assign: Use struct for MSI-X table
Date: Tue, 31 Jan 2012 12:05:49 -0700 [thread overview]
Message-ID: <1328036749.6937.100.camel@bling.home> (raw)
In-Reply-To: <20120131174015.GA3601@redhat.com>
On Tue, 2012-01-31 at 19:40 +0200, Michael S. Tsirkin wrote:
> On Sat, Jan 28, 2012 at 07:21:58AM -0700, Alex Williamson wrote:
> > This makes access much easier.
> >
> > Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
>
> Yes but this also makes it easier to forget
> to handle endian-ness.
> How about using pci_get/pci_set instead?
Do we really think existing device assignment is ever going to work on
anything but x86/x86?
Alex
> > ---
> >
> > hw/device-assignment.c | 55 ++++++++++++++++++++++--------------------------
> > hw/device-assignment.h | 9 +++++++-
> > 2 files changed, 33 insertions(+), 31 deletions(-)
> >
> > diff --git a/hw/device-assignment.c b/hw/device-assignment.c
> > index 1fc7ffa..422ee00 100644
> > --- a/hw/device-assignment.c
> > +++ b/hw/device-assignment.c
> > @@ -973,10 +973,9 @@ static int assigned_dev_update_msix_mmio(PCIDevice *pci_dev)
> > AssignedDevice *adev = DO_UPCAST(AssignedDevice, dev, pci_dev);
> > uint16_t entries_nr = 0, entries_max_nr;
> > int pos = 0, i, r = 0;
> > - uint32_t msg_addr, msg_upper_addr, msg_data, msg_ctrl;
> > struct kvm_assigned_msix_nr msix_nr;
> > struct kvm_assigned_msix_entry msix_entry;
> > - void *va = adev->msix_table_page;
> > + MSIXTableEntry *entry = adev->msix_table;
> >
> > pos = pci_find_capability(pci_dev, PCI_CAP_ID_MSIX);
> >
> > @@ -985,12 +984,11 @@ static int assigned_dev_update_msix_mmio(PCIDevice *pci_dev)
> > entries_max_nr += 1;
> >
> > /* Get the usable entry number for allocating */
> > - for (i = 0; i < entries_max_nr; i++) {
> > - memcpy(&msg_ctrl, va + i * 16 + 12, 4);
> > - memcpy(&msg_data, va + i * 16 + 8, 4);
> > + for (i = 0; i < entries_max_nr; i++, entry++) {
> > /* Ignore unused entry even it's unmasked */
> > - if (msg_data == 0)
> > + if (entry->data == 0) {
> > continue;
> > + }
> > entries_nr ++;
> > }
> >
> > @@ -1013,16 +1011,13 @@ static int assigned_dev_update_msix_mmio(PCIDevice *pci_dev)
> >
> > msix_entry.assigned_dev_id = msix_nr.assigned_dev_id;
> > entries_nr = 0;
> > - for (i = 0; i < entries_max_nr; i++) {
> > + entry = adev->msix_table;
> > + for (i = 0; i < entries_max_nr; i++, entry++) {
> > if (entries_nr >= msix_nr.entry_nr)
> > break;
> > - memcpy(&msg_ctrl, va + i * 16 + 12, 4);
> > - memcpy(&msg_data, va + i * 16 + 8, 4);
> > - if (msg_data == 0)
> > + if (entry->data == 0) {
> > continue;
> > -
> > - memcpy(&msg_addr, va + i * 16, 4);
> > - memcpy(&msg_upper_addr, va + i * 16 + 4, 4);
> > + }
> >
> > r = kvm_get_irq_route_gsi();
> > if (r < 0)
> > @@ -1031,10 +1026,11 @@ static int assigned_dev_update_msix_mmio(PCIDevice *pci_dev)
> > adev->entry[entries_nr].gsi = r;
> > adev->entry[entries_nr].type = KVM_IRQ_ROUTING_MSI;
> > adev->entry[entries_nr].flags = 0;
> > - adev->entry[entries_nr].u.msi.address_lo = msg_addr;
> > - adev->entry[entries_nr].u.msi.address_hi = msg_upper_addr;
> > - adev->entry[entries_nr].u.msi.data = msg_data;
> > - DEBUG("MSI-X data 0x%x, MSI-X addr_lo 0x%x\n!", msg_data, msg_addr);
> > + adev->entry[entries_nr].u.msi.address_lo = entry->addr_lo;
> > + adev->entry[entries_nr].u.msi.address_hi = entry->addr_hi;
> > + adev->entry[entries_nr].u.msi.data = entry->data;
> > + DEBUG("MSI-X data 0x%x, MSI-X addr_lo 0x%x\n!",
> > + entry->data, entry->addr_lo);
> > kvm_add_routing_entry(&adev->entry[entries_nr]);
> >
> > msix_entry.gsi = adev->entry[entries_nr].gsi;
> > @@ -1443,7 +1439,7 @@ static uint64_t msix_mmio_read(void *opaque, target_phys_addr_t addr,
> > AssignedDevice *adev = opaque;
> > uint64_t val;
> >
> > - memcpy(&val, (void *)((uint8_t *)adev->msix_table_page + addr), size);
> > + memcpy(&val, (void *)((uint8_t *)adev->msix_table + addr), size);
> >
> > return val;
> > }
> > @@ -1456,7 +1452,7 @@ static void msix_mmio_write(void *opaque, target_phys_addr_t addr,
> > DEBUG("write to MSI-X entry table mmio offset 0x%lx, val 0x%lx\n",
> > addr, val);
> >
> > - memcpy((void *)((uint8_t *)adev->msix_table_page + addr), &val, size);
> > + memcpy((void *)((uint8_t *)adev->msix_table + addr), &val, size);
> > }
> >
> > static const MemoryRegionOps msix_mmio_ops = {
> > @@ -1471,15 +1467,13 @@ static const MemoryRegionOps msix_mmio_ops = {
> >
> > static int assigned_dev_register_msix_mmio(AssignedDevice *dev)
> > {
> > - dev->msix_table_page = mmap(NULL, 0x1000,
> > - PROT_READ|PROT_WRITE,
> > - MAP_ANONYMOUS|MAP_PRIVATE, 0, 0);
> > - if (dev->msix_table_page == MAP_FAILED) {
> > - fprintf(stderr, "fail allocate msix_table_page! %s\n",
> > - strerror(errno));
> > + dev->msix_table = mmap(NULL, 0x1000, PROT_READ|PROT_WRITE,
> > + MAP_ANONYMOUS|MAP_PRIVATE, 0, 0);
> > + if (dev->msix_table == MAP_FAILED) {
> > + fprintf(stderr, "fail allocate msix_table! %s\n", strerror(errno));
> > return -EFAULT;
> > }
> > - memset(dev->msix_table_page, 0, 0x1000);
> > + memset(dev->msix_table, 0, 0x1000);
> > memory_region_init_io(&dev->mmio, &msix_mmio_ops, dev,
> > "assigned-dev-msix", MSIX_PAGE_SIZE);
> > return 0;
> > @@ -1487,16 +1481,17 @@ static int assigned_dev_register_msix_mmio(AssignedDevice *dev)
> >
> > static void assigned_dev_unregister_msix_mmio(AssignedDevice *dev)
> > {
> > - if (!dev->msix_table_page)
> > + if (!dev->msix_table) {
> > return;
> > + }
> >
> > memory_region_destroy(&dev->mmio);
> >
> > - if (munmap(dev->msix_table_page, 0x1000) == -1) {
> > - fprintf(stderr, "error unmapping msix_table_page! %s\n",
> > + if (munmap(dev->msix_table, 0x1000) == -1) {
> > + fprintf(stderr, "error unmapping msix_table! %s\n",
> > strerror(errno));
> > }
> > - dev->msix_table_page = NULL;
> > + dev->msix_table = NULL;
> > }
> >
> > static const VMStateDescription vmstate_assigned_device = {
> > diff --git a/hw/device-assignment.h b/hw/device-assignment.h
> > index 8ee2274..e229303 100644
> > --- a/hw/device-assignment.h
> > +++ b/hw/device-assignment.h
> > @@ -82,6 +82,13 @@ typedef struct {
> > #define ASSIGNED_DEVICE_PREFER_MSI_MASK (1 << ASSIGNED_DEVICE_PREFER_MSI_BIT)
> > #define ASSIGNED_DEVICE_USE_MEM64_MASK (1 << ASSIGNED_DEVICE_USE_MEM64_BIT)
> >
> > +typedef struct {
> > + uint32_t addr_lo;
> > + uint32_t addr_hi;
> > + uint32_t data;
> > + uint32_t ctrl;
> > +} MSIXTableEntry;
> > +
> > typedef struct AssignedDevice {
> > PCIDevice dev;
> > PCIHostDevice host;
> > @@ -110,7 +117,7 @@ typedef struct AssignedDevice {
> > uint8_t emulate_config_write[PCI_CONFIG_SPACE_SIZE];
> > int irq_entries_nr;
> > struct kvm_irq_routing_entry *entry;
> > - void *msix_table_page;
> > + MSIXTableEntry *msix_table;
> > target_phys_addr_t msix_table_addr;
> > MemoryRegion mmio;
> > char *configfd_name;
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe kvm" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-01-31 19:46 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-28 14:21 [PATCH 0/9] pci-assign: 64bit MMIO + better MSI-X table support Alex Williamson
2012-01-28 14:21 ` [PATCH 1/9] pci-assign: Optionally enable 64bit BARs in guest Alex Williamson
2012-01-31 12:40 ` Avi Kivity
2012-01-31 12:45 ` Jan Kiszka
2012-01-31 12:51 ` Avi Kivity
2012-01-31 12:57 ` Jan Kiszka
2012-01-31 13:10 ` Avi Kivity
2012-01-31 13:21 ` Jan Kiszka
2012-01-31 13:33 ` Avi Kivity
2012-01-31 21:08 ` Alex Williamson
2012-01-31 21:14 ` Michael S. Tsirkin
2012-02-01 9:03 ` Avi Kivity
2012-02-01 10:03 ` Michael S. Tsirkin
2012-02-01 13:55 ` Alex Williamson
2012-02-01 15:18 ` Michael S. Tsirkin
2012-02-01 15:24 ` Alex Williamson
2012-01-28 14:21 ` [PATCH 2/9] pci-assign: Fix warnings with DEBUG enabled Alex Williamson
2012-01-28 14:21 ` [PATCH 3/9] pci-assign: Update MSI-X MMIO to Memory API Alex Williamson
2012-01-31 12:45 ` Avi Kivity
2012-01-31 21:13 ` Alex Williamson
2012-02-01 4:22 ` Alex Williamson
2012-02-01 9:04 ` Avi Kivity
2012-02-01 13:56 ` Alex Williamson
2012-01-28 14:21 ` [PATCH 4/9] pci-assign: Use struct for MSI-X table Alex Williamson
2012-01-31 17:40 ` Michael S. Tsirkin
2012-01-31 19:05 ` Alex Williamson [this message]
2012-01-31 20:00 ` Michael S. Tsirkin
2012-01-31 21:17 ` Alex Williamson
2012-01-31 21:24 ` Michael S. Tsirkin
2012-01-31 21:30 ` Alex Williamson
2012-01-28 14:22 ` [PATCH 5/9] pci-assign: Only calculate maximum MSI-X vector entries once Alex Williamson
2012-01-31 20:18 ` Michael S. Tsirkin
2012-01-31 20:31 ` Alex Williamson
2012-01-31 20:56 ` Michael S. Tsirkin
2012-01-28 14:22 ` [PATCH 6/9] pci-assign: Proper initialization for MSI-X table Alex Williamson
2012-01-31 17:40 ` Michael S. Tsirkin
2012-01-31 19:07 ` Alex Williamson
2012-01-31 19:12 ` Michael S. Tsirkin
2012-01-31 19:16 ` Jan Kiszka
2012-01-31 20:19 ` Michael S. Tsirkin
2012-01-31 21:06 ` Alex Williamson
2012-01-28 14:22 ` [PATCH 7/9] pci-assign: Allocate entries for all MSI-X vectors Alex Williamson
2012-01-28 14:22 ` [PATCH 8/9] pci-assign: Use MSIX_PAGE_SIZE Alex Williamson
2012-01-28 14:22 ` [PATCH 9/9] pci-assign: Update MSI-X config based on table writes Alex Williamson
2012-01-31 12:50 ` Avi Kivity
2012-01-30 10:11 ` [PATCH 0/9] pci-assign: 64bit MMIO + better MSI-X table support Jan Kiszka
2012-01-30 13:44 ` Alex Williamson
2012-01-31 12:52 ` Avi Kivity
2012-01-31 12:56 ` Jan Kiszka
2012-02-06 15:55 ` Shashidhar Patil
2012-02-06 17:29 ` Alex Williamson
2012-02-09 16:23 ` Shashidhar Patil
2012-02-09 17:23 ` Alex Williamson
2012-02-12 16:30 ` Shashidhar Patil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1328036749.6937.100.camel@bling.home \
--to=alex.williamson@redhat.com \
--cc=jan.kiszka@siemens.com \
--cc=kvm@vger.kernel.org \
--cc=mst@redhat.com \
--cc=shashidhar.patil@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).