* [PATCH] virtio-spec: Add virtio-ccw spec.
2012-08-07 14:52 [RFC PATCH] Update virtio spec for virtio-ccw Cornelia Huck
@ 2012-08-07 14:52 ` Cornelia Huck
0 siblings, 0 replies; 2+ messages in thread
From: Cornelia Huck @ 2012-08-07 14:52 UTC (permalink / raw)
To: KVM, linux-s390, qemu-devel
Cc: Avi Kivity, Marcelo Tosatti, Anthony Liguori, Rusty Russell,
Christian Borntraeger, Carsten Otte, Alexander Graf,
Heiko Carstens, Martin Schwidefsky, Sebastian Ott
Add specifications for the new s390 specific virtio-ccw transport.
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
---
virtio-spec.lyx | 433 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 433 insertions(+), 0 deletions(-)
diff --git a/virtio-spec.lyx b/virtio-spec.lyx
index 7a073f4..5223380 100644
--- a/virtio-spec.lyx
+++ b/virtio-spec.lyx
@@ -57,6 +57,7 @@
\html_css_as_file 0
\html_be_strict false
\author -608949062 "Rusty Russell,,,"
+\author -385801441 "Cornelia Huck" cornelia.huck@de.ibm.com
\author 1531152142 "Paolo Bonzini,,,"
\end_header
@@ -9350,6 +9351,438 @@ tatus register description is asserted.
After the interrupt is handled, the driver must acknowledge it by writing
a bit mask corresponding to the serviced interrupt to the InterruptACK
register.
+\change_inserted -385801441 1343732742
+
+\end_layout
+
+\begin_layout Chapter*
+
+\change_inserted -385801441 1343732726
+Appendix Y: virtio-ccw
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+S/390 based virtual machines support neither PCI nor MMIO, so a different
+ transport is needed there.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+The old s390-virtio mechanism used a special page mapped above the guest's
+ memory and several diagnose calls (hypercalls); it does have some drawbacks,
+ however, like a rather limited number of devices and very restricted hotplug
+ support.
+ Moreover, device discovery and operation differ from other environments
+ on the S/390 platform.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+virtio-ccw uses the standard channel I/O based mechanism used for the majority
+ of devices on S/390.
+ A virtual channel device with a special control unit type acts as proxy
+ to the virtio device (similar to the way virtio-pci uses a PCI device)
+ and configuration and operation of the virtio device is accomplished (mostly)
+ via channel commands.
+ This means virtio devices are discoverable via standard operating system
+ algorithms, and adding virtio support is mainly a question of supporting
+ a new control unit type.
+\end_layout
+
+\begin_layout Subsection*
+
+\change_inserted -385801441 1343732726
+Basic Concepts
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732817
+As a proxy device, virtio-ccw uses a channel-attached I/O control unit with
+ a special control unit type (0x3832) and a control unit model corresponding
+ to the attached virtio device's subsystem device ID, accessed via a virtual
+ I/O subchannel and a virtual channel path of type 0x32.
+ This proxy device is discoverable via normal channel subsystem device discorver
+y (usually a STORE SUBCHANNEL loop) and answers to the basic channel commands,
+ most importantly SENSE ID.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+In addition to the basic channel commands, virtio-ccw defines a set of channel
+ commands related to configuration and operation of virtio:
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+\begin_inset listings
+inline false
+status open
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_SET_VQ 0x13
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_VDEV_RESET 0x33
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_SET_IND 0x43
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_READ_FEAT 0x12
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_WRITE_FEAT 0x11
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_READ_CONF 0x22
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_WRITE_CONF 0x21
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_WRITE_STATUS 0x31
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+#define CCW_CMD_READ_VQ_CONF 0x32
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection*
+
+\change_inserted -385801441 1343732726
+Device Initialization
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+virtio-ccw uses several channel commands to set up a device.
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Configuring a Virtqueue
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+CCW_CMD_READ_VQ_CONF is issued by the guest to obtain information about
+ a queue.
+ It uses the following structure for communicating:
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+\begin_inset listings
+inline false
+status open
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+struct vq_config_block {
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+ uint16_t index;
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+ uint16_t num;
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+} __attribute__ ((packed));
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+The number of buffers for queue
+\family typewriter
+index
+\family default
+ is returned in
+\family typewriter
+num
+\family default
+.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+Afterwards, CCW_CMD_SET_VQ is issued by the guest to inform the host about
+ the location used for its queue.
+ The transmitted structure is
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+\begin_inset listings
+inline false
+status open
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+struct vq_info_block {
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+ uint64_t queue;
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+ uint16_t num;
+\end_layout
+
+\begin_layout LyX-Code
+
+\change_inserted -385801441 1343732726
+
+} __attribute__ ((packed));
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+
+\family typewriter
+queue
+\family default
+ contains the guest address for queue
+\family typewriter
+num
+\family default
+.
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Communicating Status Information
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+The guest can change the status of a device via the CCW_CMD_WRITE_STATUS
+ command, which transmits an 8 bit status value.
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Handling Device Features
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+Features are a 32 bit value.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+The guest may obtain the host's device feature set via the CCW_CMD_READ_FEAT
+ command, which provides a guest address for the host to store the features
+ to.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+For communicating its device features to the host, the guest may use the
+ CCW_CMD_WRITE_FEAT command pointing to a guest address where the guest
+ features can be obtained.
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Device Configuration
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+The device's configuration space is located in host memory.
+ It is the same size as the standard PCI configuration space.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+To obtain information from the configuration space, the guest may use CCW_CMD_RE
+AD_CONF, specifying the guest memory for the host to write to.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+For changing configuration information, the guest may use CCW_CMD_WRITE_CONF,
+ specifying the guest memory for the host to read from.
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+In both cases, the complete configuration space is transmitted.
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Setting Up Indicators
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+To communicate the location of the indicator bits for host->guest notification,
+ the guest uses the CCW_CMD_SET_IND command which sends the guest address
+ of the indicators in a 64 bit value.
+\end_layout
+
+\begin_layout Subsection*
+
+\change_inserted -385801441 1343732726
+Device Operation
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Host->Guest Notification
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+For notifying the guest of virtqueue buffers, the host sets the corresponding
+ bit in the guest-provided indicators.
+ If an interrupt is not already pending for the subchannel, the host generates
+ an unsolicited I/O interrupt.
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Guest->Host Notification
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+For notifying the host of virtqueue buffers, the guest unfortunately can't
+ use a channel command (the asynchronous characteristics of channel I/O
+ interact badly with the host block I/O backend).
+ Instead, it uses a diagnose 0x500 call with subcode 3 specifying the queue.
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Early printk for Virtio Consoles
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+For the early printk mechanism, diagnose 0x500 with subcode 0 is used.
+\end_layout
+
+\begin_layout Subsubsection*
+
+\change_inserted -385801441 1343732726
+Resetting Devices
+\end_layout
+
+\begin_layout Standard
+
+\change_inserted -385801441 1343732726
+In order to reset a device, a guest may send the CCW_CMD_VDEV_RESET command.
+\change_unchanged
+
\end_layout
\end_deeper
--
1.7.5.4
^ permalink raw reply related [flat|nested] 2+ messages in thread