From: Avi Kivity <avi.kivity@gmail.com>
To: Gleb Natapov <gleb@redhat.com>, Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Subject: [PATCH 7/8] KVM: x86 emulator: drop unused old-style inline emulation
Date: Sat, 9 Feb 2013 11:31:50 +0200 [thread overview]
Message-ID: <1360402311-19904-8-git-send-email-avi.kivity@gmail.com> (raw)
In-Reply-To: <1360402311-19904-1-git-send-email-avi.kivity@gmail.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 198 -------------------------------------------------
1 file changed, 198 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 89f56bb..a706e52 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -282,174 +282,17 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
}
/*
- * Instruction emulation:
- * Most instructions are emulated directly via a fragment of inline assembly
- * code. This allows us to save/restore EFLAGS and thus very easily pick up
- * any modified flags.
- */
-
-#if defined(CONFIG_X86_64)
-#define _LO32 "k" /* force 32-bit operand */
-#define _STK "%%rsp" /* stack pointer */
-#elif defined(__i386__)
-#define _LO32 "" /* force 32-bit operand */
-#define _STK "%%esp" /* stack pointer */
-#endif
-
-/*
* These EFLAGS bits are restored from saved value during emulation, and
* any changes are written back to the saved value after emulation.
*/
#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
-/* Before executing instruction: restore necessary bits in EFLAGS. */
-#define _PRE_EFLAGS(_sav, _msk, _tmp) \
- /* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
- "movl %"_sav",%"_LO32 _tmp"; " \
- "push %"_tmp"; " \
- "push %"_tmp"; " \
- "movl %"_msk",%"_LO32 _tmp"; " \
- "andl %"_LO32 _tmp",("_STK"); " \
- "pushf; " \
- "notl %"_LO32 _tmp"; " \
- "andl %"_LO32 _tmp",("_STK"); " \
- "andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); " \
- "pop %"_tmp"; " \
- "orl %"_LO32 _tmp",("_STK"); " \
- "popf; " \
- "pop %"_sav"; "
-
-/* After executing instruction: write-back necessary bits in EFLAGS. */
-#define _POST_EFLAGS(_sav, _msk, _tmp) \
- /* _sav |= EFLAGS & _msk; */ \
- "pushf; " \
- "pop %"_tmp"; " \
- "andl %"_msk",%"_LO32 _tmp"; " \
- "orl %"_LO32 _tmp",%"_sav"; "
-
#ifdef CONFIG_X86_64
#define ON64(x) x
#else
#define ON64(x)
#endif
-#define ____emulate_2op(ctxt, _op, _x, _y, _suffix, _dsttype) \
- do { \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "4", "2") \
- _op _suffix " %"_x"3,%1; " \
- _POST_EFLAGS("0", "4", "2") \
- : "=m" ((ctxt)->eflags), \
- "+q" (*(_dsttype*)&(ctxt)->dst.val), \
- "=&r" (_tmp) \
- : _y ((ctxt)->src.val), "i" (EFLAGS_MASK)); \
- } while (0)
-
-
-/* Raw emulation: instruction has two explicit operands. */
-#define __emulate_2op_nobyte(ctxt,_op,_wx,_wy,_lx,_ly,_qx,_qy) \
- do { \
- unsigned long _tmp; \
- \
- switch ((ctxt)->dst.bytes) { \
- case 2: \
- ____emulate_2op(ctxt,_op,_wx,_wy,"w",u16); \
- break; \
- case 4: \
- ____emulate_2op(ctxt,_op,_lx,_ly,"l",u32); \
- break; \
- case 8: \
- ON64(____emulate_2op(ctxt,_op,_qx,_qy,"q",u64)); \
- break; \
- } \
- } while (0)
-
-#define __emulate_2op(ctxt,_op,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
- do { \
- unsigned long _tmp; \
- switch ((ctxt)->dst.bytes) { \
- case 1: \
- ____emulate_2op(ctxt,_op,_bx,_by,"b",u8); \
- break; \
- default: \
- __emulate_2op_nobyte(ctxt, _op, \
- _wx, _wy, _lx, _ly, _qx, _qy); \
- break; \
- } \
- } while (0)
-
-/* Source operand is byte-sized and may be restricted to just %cl. */
-#define emulate_2op_SrcB(ctxt, _op) \
- __emulate_2op(ctxt, _op, "b", "c", "b", "c", "b", "c", "b", "c")
-
-/* Source operand is byte, word, long or quad sized. */
-#define emulate_2op_SrcV(ctxt, _op) \
- __emulate_2op(ctxt, _op, "b", "q", "w", "r", _LO32, "r", "", "r")
-
-/* Source operand is word, long or quad sized. */
-#define emulate_2op_SrcV_nobyte(ctxt, _op) \
- __emulate_2op_nobyte(ctxt, _op, "w", "r", _LO32, "r", "", "r")
-
-/* Instruction has three operands and one operand is stored in ECX register */
-#define __emulate_2op_cl(ctxt, _op, _suffix, _type) \
- do { \
- unsigned long _tmp; \
- _type _clv = (ctxt)->src2.val; \
- _type _srcv = (ctxt)->src.val; \
- _type _dstv = (ctxt)->dst.val; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "5", "2") \
- _op _suffix " %4,%1 \n" \
- _POST_EFLAGS("0", "5", "2") \
- : "=m" ((ctxt)->eflags), "+r" (_dstv), "=&r" (_tmp) \
- : "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK) \
- ); \
- \
- (ctxt)->src2.val = (unsigned long) _clv; \
- (ctxt)->src2.val = (unsigned long) _srcv; \
- (ctxt)->dst.val = (unsigned long) _dstv; \
- } while (0)
-
-#define emulate_2op_cl(ctxt, _op) \
- do { \
- switch ((ctxt)->dst.bytes) { \
- case 2: \
- __emulate_2op_cl(ctxt, _op, "w", u16); \
- break; \
- case 4: \
- __emulate_2op_cl(ctxt, _op, "l", u32); \
- break; \
- case 8: \
- ON64(__emulate_2op_cl(ctxt, _op, "q", ulong)); \
- break; \
- } \
- } while (0)
-
-#define __emulate_1op(ctxt, _op, _suffix) \
- do { \
- unsigned long _tmp; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "3", "2") \
- _op _suffix " %1; " \
- _POST_EFLAGS("0", "3", "2") \
- : "=m" ((ctxt)->eflags), "+m" ((ctxt)->dst.val), \
- "=&r" (_tmp) \
- : "i" (EFLAGS_MASK)); \
- } while (0)
-
-/* Instruction has only one explicit operand (no source operand). */
-#define emulate_1op(ctxt, _op) \
- do { \
- switch ((ctxt)->dst.bytes) { \
- case 1: __emulate_1op(ctxt, _op, "b"); break; \
- case 2: __emulate_1op(ctxt, _op, "w"); break; \
- case 4: __emulate_1op(ctxt, _op, "l"); break; \
- case 8: ON64(__emulate_1op(ctxt, _op, "q")); break; \
- } \
- } while (0)
-
static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
#define FOP_ALIGN ".align " __stringify(FASTOP_SIZE) " \n\t"
@@ -565,47 +408,6 @@ FOP_SETCC(setle)
FOP_SETCC(setnle)
FOP_END;
-#define __emulate_1op_rax_rdx(ctxt, _op, _suffix, _ex) \
- do { \
- unsigned long _tmp; \
- ulong *rax = &ctxt->dst.val; \
- ulong *rdx = &ctxt->src.val; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "5", "1") \
- "1: \n\t" \
- _op _suffix " %6; " \
- "2: \n\t" \
- _POST_EFLAGS("0", "5", "1") \
- ".pushsection .fixup,\"ax\" \n\t" \
- "3: movb $1, %4 \n\t" \
- "jmp 2b \n\t" \
- ".popsection \n\t" \
- _ASM_EXTABLE(1b, 3b) \
- : "=m" ((ctxt)->eflags), "=&r" (_tmp), \
- "+a" (*rax), "+d" (*rdx), "+qm"(_ex) \
- : "i" (EFLAGS_MASK), "m" ((ctxt)->src2.val)); \
- } while (0)
-
-/* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */
-#define emulate_1op_rax_rdx(ctxt, _op, _ex) \
- do { \
- switch((ctxt)->src.bytes) { \
- case 1: \
- __emulate_1op_rax_rdx(ctxt, _op, "b", _ex); \
- break; \
- case 2: \
- __emulate_1op_rax_rdx(ctxt, _op, "w", _ex); \
- break; \
- case 4: \
- __emulate_1op_rax_rdx(ctxt, _op, "l", _ex); \
- break; \
- case 8: ON64( \
- __emulate_1op_rax_rdx(ctxt, _op, "q", _ex)); \
- break; \
- } \
- } while (0)
-
static int emulator_check_intercept(struct x86_emulate_ctxt *ctxt,
enum x86_intercept intercept,
enum x86_intercept_stage stage)
--
1.8.1.2
next prev parent reply other threads:[~2013-02-09 9:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
2013-02-09 9:31 ` [PATCH 1/8] KVM: x86 emulator: add support for writing back the source operand Avi Kivity
2013-02-10 11:56 ` Gleb Natapov
2013-02-09 9:31 ` [PATCH 2/8] KVM: x86 emulator: decode extended accumulator explicity Avi Kivity
2013-02-10 12:19 ` Gleb Natapov
2013-05-20 12:32 ` Gleb Natapov
2013-02-09 9:31 ` [PATCH 3/8] KVM: x86 emulator: switch MUL/DIV to DstXacc Avi Kivity
2013-02-09 9:31 ` [PATCH 4/8] KVM: x86 emulator: Switch fastop src operand to RDX Avi Kivity
2013-02-09 9:31 ` [PATCH 5/8] KVM: x86 emulator: convert single-operand MUL/IMUL to fastop Avi Kivity
2013-02-09 9:31 ` [PATCH 6/8] KVM: x86 emulator: convert DIV/IDIV " Avi Kivity
2013-02-10 12:26 ` Gleb Natapov
2013-02-09 9:31 ` Avi Kivity [this message]
2013-02-09 9:31 ` [PATCH 8/8] KVM: x86 emulator: convert XADD " Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360402311-19904-8-git-send-email-avi.kivity@gmail.com \
--to=avi.kivity@gmail.com \
--cc=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox