From: Alex Williamson <alex.williamson@redhat.com>
To: Feng Wu <feng.wu@intel.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
pbonzini@redhat.com, joro@8bytes.org, eric.auger@linaro.org
Subject: Re: [v5 09/19] vfio: Register/unregister irq_bypass_producer
Date: Mon, 13 Jul 2015 12:57:29 -0600 [thread overview]
Message-ID: <1436813849.1391.380.camel@redhat.com> (raw)
In-Reply-To: <1436780855-3617-10-git-send-email-feng.wu@intel.com>
On Mon, 2015-07-13 at 17:47 +0800, Feng Wu wrote:
> This patch adds the registration/unregistration of an
> irq_bypass_producer for MSI/MSIx on vfio pci devices.
>
> Signed-off-by: Feng Wu <feng.wu@intel.com>
> ---
> drivers/vfio/pci/vfio_pci_intrs.c | 19 +++++++++++++++++++
> drivers/vfio/pci/vfio_pci_private.h | 2 ++
> 2 files changed, 21 insertions(+)
>
> diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
> index 1f577b4..4795606 100644
> --- a/drivers/vfio/pci/vfio_pci_intrs.c
> +++ b/drivers/vfio/pci/vfio_pci_intrs.c
> @@ -305,6 +305,16 @@ static int vfio_msi_enable(struct vfio_pci_device *vdev, int nvec, bool msix)
> return 0;
> }
>
> +void vfio_pci_add_consumer(struct irq_bypass_producer *prod,
> + struct irq_bypass_consumer *cons)
> +{
> +}
> +
> +void vfio_pci_del_consumer(struct irq_bypass_producer *prod,
> + struct irq_bypass_consumer *cons)
> +{
> +}
> +
Yes, as Eric says, these should be static
> static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
> int vector, int fd, bool msix)
> {
> @@ -319,6 +329,7 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
>
> if (vdev->ctx[vector].trigger) {
> free_irq(irq, vdev->ctx[vector].trigger);
> + irq_bypass_unregister_producer(&vdev->ctx[vector].producer);
> kfree(vdev->ctx[vector].name);
> eventfd_ctx_put(vdev->ctx[vector].trigger);
> vdev->ctx[vector].trigger = NULL;
> @@ -360,6 +371,14 @@ static int vfio_msi_set_vector_signal(struct vfio_pci_device *vdev,
> return ret;
> }
>
> + INIT_LIST_HEAD(&vdev->ctx[vector].producer.node);
nit, INIT_LIST_HEAD isn't really needed, irq-bypass-manager shouldn't
trust incoming data here anyway.
> + vdev->ctx[vector].producer.token = trigger;
> + vdev->ctx[vector].producer.irq = irq;
> + vdev->ctx[vector].producer.add_consumer = vfio_pci_add_consumer;
> + vdev->ctx[vector].producer.del_consumer = vfio_pci_del_consumer;
> + ret = irq_bypass_register_producer(&vdev->ctx[vector].producer);
> + WARN_ON(ret);
This is only an acceleration path, so a dev_dbg() or dev_info() is
probably more appropriate. Same for kvm side.
> +
> vdev->ctx[vector].trigger = trigger;
>
> return 0;
> diff --git a/drivers/vfio/pci/vfio_pci_private.h b/drivers/vfio/pci/vfio_pci_private.h
> index ae0e1b4..0e7394f 100644
> --- a/drivers/vfio/pci/vfio_pci_private.h
> +++ b/drivers/vfio/pci/vfio_pci_private.h
> @@ -13,6 +13,7 @@
>
> #include <linux/mutex.h>
> #include <linux/pci.h>
> +#include <linux/irqbypass.h>
>
> #ifndef VFIO_PCI_PRIVATE_H
> #define VFIO_PCI_PRIVATE_H
> @@ -29,6 +30,7 @@ struct vfio_pci_irq_ctx {
> struct virqfd *mask;
> char *name;
> bool masked;
> + struct irq_bypass_producer producer;
> };
>
> struct vfio_pci_device {
next prev parent reply other threads:[~2015-07-13 18:57 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-13 9:47 [v5 00/19] Add VT-d Posted-Interrupts support Feng Wu
2015-07-13 9:47 ` [v5 01/19] KVM: Extend struct pi_desc for VT-d Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 02/19] KVM: Add some helper functions for Posted-Interrupts Feng Wu
2015-07-13 9:47 ` [v5 03/19] KVM: Define a new interface kvm_intr_is_single_vcpu() Feng Wu
2015-07-13 9:47 ` [v5 04/19] KVM: Get Posted-Interrupts descriptor address from struct kvm_vcpu Feng Wu
2015-07-13 9:47 ` [v5 05/19] KVM: Add interfaces to control PI outside vmx Feng Wu
2015-07-13 9:47 ` [v5 06/19] KVM: Make struct kvm_irq_routing_table accessible Feng Wu
2015-07-13 9:47 ` [v5 07/19] KVM: make kvm_set_msi_irq() public Feng Wu
2015-07-13 9:47 ` [v5 08/19] vfio: Select IRQ_BYPASS_MANAGER for vfio PCI devices Feng Wu
2015-07-13 9:47 ` [v5 09/19] vfio: Register/unregister irq_bypass_producer Feng Wu
2015-07-13 12:55 ` Eric Auger
2015-07-13 18:57 ` Alex Williamson [this message]
2015-07-13 9:47 ` [v5 10/19] KVM, x86: Select IRQ_BYPASS_MANAGER for KVM_INTEL Feng Wu
2015-07-13 9:47 ` [v5 11/19] KVM: create kvm_irqfd.h Feng Wu
2015-07-13 9:47 ` [v5 12/19] KVM: eventfd: add irq bypass information in irqfd Feng Wu
2015-07-13 9:47 ` [v5 13/19] KVM: x86: Update IRTE for posted-interrupts Feng Wu
2015-07-13 9:47 ` [v5 14/19] KVM: x86: Add arch specific routines for irqbypass manager Feng Wu
2015-07-13 13:17 ` Eric Auger
2015-07-13 9:47 ` [v5 15/19] KVM: eventfd: add irq bypass consumer management Feng Wu
2015-07-13 13:16 ` Eric Auger
2015-07-13 13:47 ` Paolo Bonzini
2015-07-28 5:06 ` Wu, Feng
2015-07-13 9:47 ` [v5 16/19] KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd' Feng Wu
2015-07-13 13:09 ` Eric Auger
2015-07-13 9:47 ` [v5 17/19] KVM: Update Posted-Interrupts Descriptor when vCPU is preempted Feng Wu
2015-07-13 9:47 ` [v5 18/19] KVM: Update Posted-Interrupts Descriptor when vCPU is blocked Feng Wu
2015-07-13 9:47 ` [v5 19/19] KVM: Warn if 'SN' is set during posting interrupts by software Feng Wu
2015-07-13 13:19 ` [v5 00/19] Add VT-d Posted-Interrupts support Eric Auger
2015-07-14 1:08 ` Wu, Feng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436813849.1391.380.camel@redhat.com \
--to=alex.williamson@redhat.com \
--cc=eric.auger@linaro.org \
--cc=feng.wu@intel.com \
--cc=joro@8bytes.org \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).