From: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
To: Andrew Jones <drjones@redhat.com>
Cc: kvm@vger.kernel.org, pbonzini@redhat.com, rkrcmar@redhat.com,
kvm-ppc@vger.kernel.org, lvivier@redhat.com, thuth@redhat.com
Subject: Re: [kvm-unit-tests PATCH V2 4/4] powerpc/tm: Add a test for H_CEDE while tm suspended
Date: Mon, 15 Aug 2016 12:01:10 +1000 [thread overview]
Message-ID: <1471226470.4052.26.camel@gmail.com> (raw)
In-Reply-To: <20160812171956.jn6lg3tafkczsks6@kamzik.localdomain>
On Fri, 2016-08-12 at 19:19 +0200, Andrew Jones wrote:
> On Wed, Aug 10, 2016 at 11:59:37AM +1000, Suraj Jitindar Singh wrote:
> >
> > On Power machines if a guest cedes while a tm transaction is in the
> > suspended state then the checkpointed state of the vcpu may be lost
> > and we
> > lose the cpu in the host.
> >
> > Add a file for tm tests "powerpc/tm.c" and add a test to check if
> > the fix
> > has been applied to the host kernel. If this fix hasn't been
> > applied then
> > the test will never complete and the cpu will be lost. Otherwise
> > the test
> > should succeed. Since this has the ability to mess things up in the
> > host
> > mark this test as don't run by default.
> >
> > Based on initial work done by: Cyril Bur <cyril.bur@au1.ibm.com>
> >
> > Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
> > ---
> > lib/powerpc/asm/hcall.h | 1 +
> > powerpc/Makefile.common | 3 +-
> > powerpc/tm.c | 176
> > ++++++++++++++++++++++++++++++++++++++++++++++++
> > powerpc/unittests.cfg | 6 ++
> > 4 files changed, 185 insertions(+), 1 deletion(-)
> > create mode 100644 powerpc/tm.c
> >
> > diff --git a/lib/powerpc/asm/hcall.h b/lib/powerpc/asm/hcall.h
> > index 99bce79..80aa3e3 100644
> > --- a/lib/powerpc/asm/hcall.h
> > +++ b/lib/powerpc/asm/hcall.h
> > @@ -18,6 +18,7 @@
> > #define H_SET_SPRG0 0x24
> > #define H_SET_DABR 0x28
> > #define H_PAGE_INIT 0x2c
> > +#define H_CEDE 0xE0
> > #define H_PUT_TERM_CHAR 0x58
> > #define H_RANDOM 0x300
> > #define H_SET_MODE 0x31C
> > diff --git a/powerpc/Makefile.common b/powerpc/Makefile.common
> > index 677030a..93e4f66 100644
> > --- a/powerpc/Makefile.common
> > +++ b/powerpc/Makefile.common
> > @@ -8,7 +8,8 @@ tests-common = \
> > $(TEST_DIR)/selftest.elf \
> > $(TEST_DIR)/spapr_hcall.elf \
> > $(TEST_DIR)/rtas.elf \
> > - $(TEST_DIR)/emulator.elf
> > + $(TEST_DIR)/emulator.elf \
> > + $(TEST_DIR)/tm.elf
> >
> > all: $(TEST_DIR)/boot_rom.bin test_cases
> >
> > diff --git a/powerpc/tm.c b/powerpc/tm.c
> > new file mode 100644
> > index 0000000..7f675ff
> > --- /dev/null
> > +++ b/powerpc/tm.c
> > @@ -0,0 +1,176 @@
> > +/*
> > + * Transactional Memory Unit Tests
> > + *
> > + * Copyright 2016 Suraj Jitindar Singh, IBM.
> > + *
> > + * This work is licensed under the terms of the GNU LGPL, version
> > 2.
> > + */
> > +#include <libcflat.h>
> > +#include <libfdt/libfdt.h>
> > +#include <devicetree.h>
> > +#include <util.h>
> > +#include <alloc.h>
> above four includes aren't used
Looks like these are left over from when I had all the code in this
file, I'll remove these.
>
> >
> > +#include <asm/hcall.h>
> > +#include <asm/ppc_asm.h>
> ppc_asm.h unused
Ok
>
> >
> > +#include <asm/processor.h>
> > +#include <asm/handlers.h>
> > +#include <asm/smp.h>
> > +
> > +#define US_TO_CYCLES(us) (us << 9)
> > +
> > +/*
> > + * Get decrementer value
> > + */
> > +static uint64_t get_dec(void)
> > +{
> > + uint64_t dec = 0;
> > +
> > + asm volatile ( "mfdec %[dec]" : [dec] "+r" (dec)
> > + :
> > + :
> > + );
> > +
> > + return dec;
> > +}
> > +
> > +/*
> > + * Sleep for <us> micro-seconds (must be less than 4 seconds)
> > + */
> > +static void sleep(uint64_t us)
> > +{
> > + uint64_t expire_time, dec, cycles = US_TO_CYCLES(us);
> > +
> > + if (cycles > 0x7FFFFFFF)
> > + cycles = 0x7FFFFFFF;
> > +
> > + if (cycles > (dec = get_dec())) {
> > + expire_time = 0x7FFFFFFF + dec - cycles;
> > + while (get_dec() < dec)
> > + ;
> > + } else {
> > + expire_time = dec - cycles;
> > + }
> > +
> > + while (get_dec() > expire_time)
> > + ;
> > +}
> You may want to rename this to udelay (like the kernel's naming and
> make them available to all powerpc unit tests by adding them to
> processor.c. See (not yet merged) patch [*] where I do that for ARM.
>
> [*] https://github.com/rhdrjones/kvm-unit-
> tests/commit/40f1d91930b3deebdd81d59438083ebcf2ac49e6
I'll take a look. That name is much better.
>
> >
> > +
> > +static int h_cede(void)
> > +{
> > + register uint64_t r3 asm("r3") = H_CEDE;
> > +
> > + asm volatile ( "sc 1" : "+r"(r3)
> > + :
> > + : "r0", "r4", "r5", "r6", "r7",
> > "r8", "r9",
> > + "r10", "r11", "r12", "xer", "ctr",
> > "cc"
> > + );
> > +
> > + return r3;
> > +}
> > +
> > +/*
> > + * Enable transactional memory
> > + * Returns: 0 - Failure
> > + * 1 - Success
> TRUE/FALSE
Ok
>
> >
> > + */
> > +static bool enable_tm(void)
> > +{
> > + uint64_t msr = 0;
> > +
> > + asm volatile ( "mfmsr %[msr]" : [msr] "+r" (msr)
> > + :
> > + :
> > + );
> > +
> > + msr |= (((uint64_t) 1) << 32);
> > +
> > + asm volatile ( "mtmsrd %1\n\t"
> > + "mfmsr %0" : "+r" (msr)
> > + : "r" (msr)
> > + :
> > + );
> > +
> > + return !!(msr & (((uint64_t) 1) << 32));
> > +}
> > +
> > +/*
> > + * Test H_CEDE call while transactional memory transaction is
> > suspended
> > + *
> > + * WARNING: This tests for a known vulnerability in which the host
> > may go down.
> > + * Probably best not to run this if your host going down is going
> > to cause
> > + * problems.
> > + *
> > + * If the test passes then your kernel probably has the necessary
> > patch.
> > + * If the test fails then the H_CEDE call was unsuccessful and the
> > + * vulnerability wasn't tested.
> > + * If the test hits the vulnerability then it will never complete
> > or report and
> > + * the qemu process will block indefinately. RCU stalls will be
> > detected on the
> > + * cpu and any process scheduled on the lost cpu will also block
> > indefinitely.
> > + */
> > +static void test_h_cede_tm(int argc, char **argv)
> > +{
> > + bool pass = true;
> > + int i;
> > +
> > + if (argc > 2)
> > + report_abort("Unsupported argument: '%s'",
> > argv[2]);
> > +
> > + handle_exception(0x900, &dec_except_handler, NULL);
> > +
> > + if (!start_all_cpus(&halt, 0))
> > + report_abort("Failed to start secondary cpus");
> > +
> > + if (!enable_tm())
> > + report_abort("Failed to enable tm");
> > +
> > + /*
> > + * Begin a transaction and guarantee we are in the suspend
> > state
> > + * before continuing
> > + */
> > + asm volatile ( "1: tbegin.\n\t"
> > + "beq 2f\n\t"
> > + "tsuspend.\n\t"
> > + "2: tcheck cr0\n\t"
> > + "bf 2,1b" :
> > + :
> > + : "cr0"
> > + );
> > +
> > + for (i = 0; i < 500 && pass; i++) {
> > + uint64_t rval = h_cede();
> > +
> > + if (rval != H_SUCCESS)
> > + pass = false;
> > + sleep(5000);
> > + }
> > +
> > + report("H_CEDE TM", pass);
> > +}
> > +
> > +struct {
> > + const char *name;
> > + void (*func)(int argc, char **argv);
> > +} hctests[] = {
> > + { "h_cede_tm", test_h_cede_tm },
> > + { NULL, NULL }
> > +};
> > +
> > +int main(int argc, char **argv)
> > +{
> > + bool all = false;
> nit: initialization unnecessary
Ok
>
> >
> > + int i;
> > +
> > + report_prefix_push("tm");
> > +
> > + all = (argc == 1 || (argc == 2 && !strcmp(argv[1],
> > "all")));
> nit: outer braces unnecessary (and not preferred)
Ok
>
> >
> > +
> > + for (i = 0; hctests[i].name != NULL; i++) {
> > + if (all || strcmp(argv[1], hctests[i].name) == 0)
> > {
> > + report_prefix_push(hctests[i].name);
> > + hctests[i].func(argc, argv);
> > + report_prefix_pop();
> > + }
> > + }
> > +
> > + return report_summary();
> > +}
> > diff --git a/powerpc/unittests.cfg b/powerpc/unittests.cfg
> > index 0098cb6..20dbde6 100644
> > --- a/powerpc/unittests.cfg
> > +++ b/powerpc/unittests.cfg
> > @@ -53,3 +53,9 @@ groups = rtas
> >
> > [emulator]
> > file = emulator.elf
> > +
> > +[h_cede_tm]
> > +file = tm.elf
> > +smp = 2,threads=2
> > +extra_params = -append "h_cede_tm"
> > +groups = nodefault,h_cede_tm
Thanks for the review
next prev parent reply other threads:[~2016-08-15 2:01 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-10 1:59 [kvm-unit-tests PATCH V2 1/4] scripts/runtime: Add ability to mark test as don't run by default Suraj Jitindar Singh
2016-08-10 1:59 ` [kvm-unit-tests PATCH V2 2/4] lib/powerpc: Add generic decrementer exception handler Suraj Jitindar Singh
2016-08-10 10:38 ` Thomas Huth
2016-08-12 6:17 ` Suraj Jitindar Singh
2016-08-10 1:59 ` [kvm-unit-tests PATCH V2 3/4] lib/powerpc: Add function to start secondary threads Suraj Jitindar Singh
2016-08-10 11:25 ` Thomas Huth
2016-08-12 6:30 ` Suraj Jitindar Singh
2016-08-12 11:19 ` Thomas Huth
2016-08-15 1:01 ` Suraj Jitindar Singh
2016-08-12 17:07 ` Andrew Jones
2016-08-15 1:58 ` Suraj Jitindar Singh
2016-08-15 6:27 ` Andrew Jones
2016-08-16 5:10 ` Suraj Jitindar Singh
2016-08-10 1:59 ` [kvm-unit-tests PATCH V2 4/4] powerpc/tm: Add a test for H_CEDE while tm suspended Suraj Jitindar Singh
2016-08-10 9:43 ` Thomas Huth
2016-08-12 6:36 ` Suraj Jitindar Singh
2016-08-10 11:33 ` Thomas Huth
2016-08-12 6:36 ` Suraj Jitindar Singh
2016-08-12 17:19 ` Andrew Jones
2016-08-15 2:01 ` Suraj Jitindar Singh [this message]
2016-08-10 13:22 ` [kvm-unit-tests PATCH V2 1/4] scripts/runtime: Add ability to mark test as don't run by default Radim Krčmář
2016-08-12 6:13 ` Suraj Jitindar Singh
2016-08-12 10:00 ` Andrew Jones
2016-08-12 12:06 ` Radim Krčmář
2016-08-12 12:58 ` Andrew Jones
2016-08-14 23:41 ` Suraj Jitindar Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471226470.4052.26.camel@gmail.com \
--to=sjitindarsingh@gmail.com \
--cc=drjones@redhat.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=kvm@vger.kernel.org \
--cc=lvivier@redhat.com \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).