From: Eric Auger <eric.auger@redhat.com>
To: eric.auger.pro@gmail.com, eric.auger@redhat.com,
linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
marc.zyngier@arm.com, cdall@linaro.org, peter.maydell@linaro.org,
andre.przywara@arm.com, wanghaibin.wang@huawei.com
Cc: wu.wubin@huawei.com
Subject: [PATCH v2 03/10] KVM: arm/arm64: vgic-its: Improve error reporting on device table save
Date: Wed, 27 Sep 2017 15:28:33 +0200 [thread overview]
Message-ID: <1506518920-18571-4-git-send-email-eric.auger@redhat.com> (raw)
In-Reply-To: <1506518920-18571-1-git-send-email-eric.auger@redhat.com>
At the moment the device table save() returns -EINVAL if
vgic_its_check_id() fails to return the gpa of the entry
associated to the device/collection id. Let vgic_its_check_id()
return an int instead of a bool and return a more precised
error value:
- EINVAL in case the id is out of range
- EFAULT if the gpa is not provisionned or is not valid
We also check first the GITS_BASER<n> Valid bit is set.
This allows the userspace to discriminate failure reasons.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
---
need to CC stable
---
virt/kvm/arm/vgic/vgic-its.c | 53 ++++++++++++++++++++++++++++++--------------
1 file changed, 36 insertions(+), 17 deletions(-)
diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
index 76bed2d..c1f7972 100644
--- a/virt/kvm/arm/vgic/vgic-its.c
+++ b/virt/kvm/arm/vgic/vgic-its.c
@@ -688,14 +688,24 @@ static int vgic_its_cmd_handle_movi(struct kvm *kvm, struct vgic_its *its,
}
/*
- * Check whether an ID can be stored into the corresponding guest table.
+ * vgic_its_check_id - Check whether an ID can be stored into
+ * the corresponding guest table.
+ *
* For a direct table this is pretty easy, but gets a bit nasty for
* indirect tables. We check whether the resulting guest physical address
* is actually valid (covered by a memslot and guest accessible).
* For this we have to read the respective first level entry.
+ *
+ * @its: its handle
+ * @baser: GITS_BASER<n> register
+ * @id: id of the device/collection
+ * @eaddr: output gpa of the corresponding table entry
+ *
+ * Return: 0 on success, -EINVAL if @id is out of range, -EFAULT if
+ * the address cannot be computed or is not valid
*/
-static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
- gpa_t *eaddr)
+static int vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
+ gpa_t *eaddr)
{
int l1_tbl_size = GITS_BASER_NR_PAGES(baser) * SZ_64K;
u64 indirect_ptr, type = GITS_BASER_TYPE(baser);
@@ -703,50 +713,56 @@ static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
int index;
gfn_t gfn;
+ if (!(baser & GITS_BASER_VALID))
+ return -EFAULT;
+
switch (type) {
case GITS_BASER_TYPE_DEVICE:
if (id >= BIT_ULL(VITS_TYPER_DEVBITS))
- return false;
+ return -EINVAL;
break;
case GITS_BASER_TYPE_COLLECTION:
/* as GITS_TYPER.CIL == 0, ITS supports 16-bit collection ID */
if (id >= BIT_ULL(16))
- return false;
+ return -EINVAL;
break;
default:
- return false;
+ return -EINVAL;
}
if (!(baser & GITS_BASER_INDIRECT)) {
phys_addr_t addr;
if (id >= (l1_tbl_size / esz))
- return false;
+ return -EINVAL;
addr = BASER_ADDRESS(baser) + id * esz;
gfn = addr >> PAGE_SHIFT;
if (eaddr)
*eaddr = addr;
- return kvm_is_visible_gfn(its->dev->kvm, gfn);
+ if (kvm_is_visible_gfn(its->dev->kvm, gfn))
+ return 0;
+ else
+ return -EFAULT;
}
/* calculate and check the index into the 1st level */
index = id / (SZ_64K / esz);
if (index >= (l1_tbl_size / sizeof(u64)))
- return false;
+ return -EINVAL;
/* Each 1st level entry is represented by a 64-bit value. */
if (kvm_read_guest(its->dev->kvm,
BASER_ADDRESS(baser) + index * sizeof(indirect_ptr),
&indirect_ptr, sizeof(indirect_ptr)))
- return false;
+ return -EFAULT;
indirect_ptr = le64_to_cpu(indirect_ptr);
/* check the valid bit of the first level entry */
if (!(indirect_ptr & BIT_ULL(63)))
- return false;
+ return -EFAULT;
/*
* Mask the guest physical address and calculate the frame number.
@@ -762,7 +778,10 @@ static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
if (eaddr)
*eaddr = indirect_ptr;
- return kvm_is_visible_gfn(its->dev->kvm, gfn);
+ if (kvm_is_visible_gfn(its->dev->kvm, gfn))
+ return 0;
+ else
+ return -EFAULT;
}
static int vgic_its_alloc_collection(struct vgic_its *its,
@@ -771,7 +790,7 @@ static int vgic_its_alloc_collection(struct vgic_its *its,
{
struct its_collection *collection;
- if (!vgic_its_check_id(its, its->baser_coll_table, coll_id, NULL))
+ if (vgic_its_check_id(its, its->baser_coll_table, coll_id, NULL))
return E_ITS_MAPC_COLLECTION_OOR;
collection = kzalloc(sizeof(*collection), GFP_KERNEL);
@@ -943,7 +962,7 @@ static int vgic_its_cmd_handle_mapd(struct kvm *kvm, struct vgic_its *its,
gpa_t itt_addr = its_cmd_get_ittaddr(its_cmd);
struct its_device *device;
- if (!vgic_its_check_id(its, its->baser_device_table, device_id, NULL))
+ if (vgic_its_check_id(its, its->baser_device_table, device_id, NULL))
return E_ITS_MAPD_DEVICE_OOR;
if (valid && num_eventid_bits > VITS_TYPER_IDBITS)
@@ -2060,9 +2079,9 @@ static int vgic_its_save_device_tables(struct vgic_its *its)
int ret;
gpa_t eaddr;
- if (!vgic_its_check_id(its, baser,
- dev->device_id, &eaddr))
- return -EINVAL;
+ ret = vgic_its_check_id(its, baser, dev->device_id, &eaddr);
+ if (ret)
+ return ret;
ret = vgic_its_save_itt(its, dev);
if (ret)
--
2.5.5
next prev parent reply other threads:[~2017-09-27 13:28 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-27 13:28 [PATCH v2 00/10] vITS Migration fixes and reset Eric Auger
2017-09-27 13:28 ` [PATCH v2 01/10] KVM: arm/arm64: vgic-its: fix return value for restore Eric Auger
2017-10-06 14:37 ` Andre Przywara
2017-10-06 15:33 ` Auger Eric
2017-10-13 11:04 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 02/10] KVM: arm/arm64: vgic-its: Always allow clearing GITS_CREADR/CWRITER Eric Auger
2017-10-06 14:37 ` Andre Przywara
2017-10-06 15:29 ` Auger Eric
2017-10-13 11:44 ` Christoffer Dall
2017-10-13 11:54 ` Auger Eric
2017-10-13 17:54 ` Christoffer Dall
2017-10-14 8:53 ` Auger Eric
2017-10-14 15:04 ` Christoffer Dall
2017-09-27 13:28 ` Eric Auger [this message]
2017-10-06 14:38 ` [PATCH v2 03/10] KVM: arm/arm64: vgic-its: Improve error reporting on device table save Andre Przywara
2017-10-13 13:16 ` Christoffer Dall
2017-10-13 14:22 ` Auger Eric
2017-10-13 17:56 ` Christoffer Dall
2017-10-14 8:52 ` Auger Eric
2017-10-14 15:06 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 04/10] KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables Eric Auger
2017-10-06 14:38 ` Andre Przywara
2017-10-13 13:24 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 05/10] KVM: arm/arm64: vgic-its: Check GITS_CBASER validity before processing commands Eric Auger
2017-10-06 14:38 ` Andre Przywara
2017-10-06 15:29 ` Auger Eric
2017-09-27 13:28 ` [PATCH v2 06/10] KVM: arm/arm64: vgic-its: Always attempt to save/restore device and collection tables Eric Auger
2017-10-06 14:38 ` Andre Przywara
2017-10-06 15:29 ` Auger Eric
2017-09-27 13:28 ` [PATCH v2 07/10] KVM: arm/arm64: vgic-its: new helper functions to free the caches Eric Auger
2017-10-13 13:35 ` Christoffer Dall
2017-10-13 14:37 ` Auger Eric
2017-10-21 9:02 ` Auger Eric
2017-10-21 14:34 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 08/10] KVM: arm/arm64: vgic-its: free caches when GITS_BASER Valid bit is cleared Eric Auger
2017-10-13 15:19 ` Christoffer Dall
2017-10-13 15:34 ` Auger Eric
2017-10-13 17:59 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 09/10] KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET Eric Auger
2017-10-12 10:57 ` Peter Maydell
2017-10-12 11:34 ` Auger Eric
2017-10-13 15:26 ` Christoffer Dall
2017-10-13 15:41 ` Auger Eric
2017-10-13 18:00 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 10/10] KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET Eric Auger
2017-10-13 15:40 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1506518920-18571-4-git-send-email-eric.auger@redhat.com \
--to=eric.auger@redhat.com \
--cc=andre.przywara@arm.com \
--cc=cdall@linaro.org \
--cc=eric.auger.pro@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=peter.maydell@linaro.org \
--cc=wanghaibin.wang@huawei.com \
--cc=wu.wubin@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox