From: Christoffer Dall <christoffer.dall@arm.com>
To: kvmarm@lists.cs.columbia.edu, linux-arm-kernel@lists.infradead.org
Cc: kvm@vger.kernel.org, Marc Zyngier <marc.zyngier@arm.com>,
Andre Przywara <andre.przywara@arm.com>
Subject: [PATCH v4 02/10] KVM: arm/arm64: vgic: Keep track of implementation revision
Date: Mon, 16 Jul 2018 15:06:19 +0200 [thread overview]
Message-ID: <1531746387-7033-3-git-send-email-christoffer.dall@arm.com> (raw)
In-Reply-To: <1531746387-7033-1-git-send-email-christoffer.dall@arm.com>
As we are about to tweak implementation aspects of the VGIC emulation,
while still preserving some level of backwards compatibility support,
add a field to keep track of the implementation revision field which is
reported to the VM and to userspace.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
---
include/kvm/arm_vgic.h | 3 +++
virt/kvm/arm/vgic/vgic-init.c | 1 +
virt/kvm/arm/vgic/vgic-mmio-v2.c | 6 ++++--
virt/kvm/arm/vgic/vgic-mmio-v3.c | 6 ++++--
4 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/include/kvm/arm_vgic.h b/include/kvm/arm_vgic.h
index cfdd248..7e64c46 100644
--- a/include/kvm/arm_vgic.h
+++ b/include/kvm/arm_vgic.h
@@ -217,6 +217,9 @@ struct vgic_dist {
/* vGIC model the kernel emulates for the guest (GICv2 or GICv3) */
u32 vgic_model;
+ /* Implementation revision as reported in the GICD_IIDR */
+ u32 implementation_rev;
+
/* Do injected MSIs require an additional device ID? */
bool msis_require_devid;
diff --git a/virt/kvm/arm/vgic/vgic-init.c b/virt/kvm/arm/vgic/vgic-init.c
index b714179..8b6fc45 100644
--- a/virt/kvm/arm/vgic/vgic-init.c
+++ b/virt/kvm/arm/vgic/vgic-init.c
@@ -298,6 +298,7 @@ int vgic_init(struct kvm *kvm)
vgic_debug_init(kvm);
+ dist->implementation_rev = 0;
dist->initialized = true;
out:
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v2.c b/virt/kvm/arm/vgic/vgic-mmio-v2.c
index af44e569..f0c5351 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v2.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v2.c
@@ -25,19 +25,21 @@
static unsigned long vgic_mmio_read_v2_misc(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len)
{
+ struct vgic_dist *vgic = &vcpu->kvm->arch.vgic;
u32 value;
switch (addr & 0x0c) {
case GIC_DIST_CTRL:
- value = vcpu->kvm->arch.vgic.enabled ? GICD_ENABLE : 0;
+ value = vgic->enabled ? GICD_ENABLE : 0;
break;
case GIC_DIST_CTR:
- value = vcpu->kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS;
+ value = vgic->nr_spis + VGIC_NR_PRIVATE_IRQS;
value = (value >> 5) - 1;
value |= (atomic_read(&vcpu->kvm->online_vcpus) - 1) << 5;
break;
case GIC_DIST_IIDR:
value = (PRODUCT_ID_KVM << GICD_IIDR_PRODUCT_ID_SHIFT) |
+ (vgic->implementation_rev << GICD_IIDR_REVISION_SHIFT) |
(IMPLEMENTER_ARM << GICD_IIDR_IMPLEMENTER_SHIFT);
break;
default:
diff --git a/virt/kvm/arm/vgic/vgic-mmio-v3.c b/virt/kvm/arm/vgic/vgic-mmio-v3.c
index c03f424..ebe10a0 100644
--- a/virt/kvm/arm/vgic/vgic-mmio-v3.c
+++ b/virt/kvm/arm/vgic/vgic-mmio-v3.c
@@ -62,16 +62,17 @@ bool vgic_supports_direct_msis(struct kvm *kvm)
static unsigned long vgic_mmio_read_v3_misc(struct kvm_vcpu *vcpu,
gpa_t addr, unsigned int len)
{
+ struct vgic_dist *vgic = &vcpu->kvm->arch.vgic;
u32 value = 0;
switch (addr & 0x0c) {
case GICD_CTLR:
- if (vcpu->kvm->arch.vgic.enabled)
+ if (vgic->enabled)
value |= GICD_CTLR_ENABLE_SS_G1;
value |= GICD_CTLR_ARE_NS | GICD_CTLR_DS;
break;
case GICD_TYPER:
- value = vcpu->kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS;
+ value = vgic->nr_spis + VGIC_NR_PRIVATE_IRQS;
value = (value >> 5) - 1;
if (vgic_has_its(vcpu->kvm)) {
value |= (INTERRUPT_ID_BITS_ITS - 1) << 19;
@@ -82,6 +83,7 @@ static unsigned long vgic_mmio_read_v3_misc(struct kvm_vcpu *vcpu,
break;
case GICD_IIDR:
value = (PRODUCT_ID_KVM << GICD_IIDR_PRODUCT_ID_SHIFT) |
+ (vgic->implementation_rev << GICD_IIDR_REVISION_SHIFT) |
(IMPLEMENTER_ARM << GICD_IIDR_IMPLEMENTER_SHIFT);
break;
default:
--
2.7.4
next prev parent reply other threads:[~2018-07-16 13:06 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-16 13:06 [PATCH v4 00/10] KVM: arm/arm64: vgic: Virtual interrupt grouping support Christoffer Dall
2018-07-16 13:06 ` [PATCH v4 01/10] KVM: arm/arm64: vgic: Define GICD_IIDR fields for GICv2 and GIv3 Christoffer Dall
2018-07-19 16:08 ` Andrew Jones
2018-07-16 13:06 ` Christoffer Dall [this message]
2018-07-19 16:11 ` [PATCH v4 02/10] KVM: arm/arm64: vgic: Keep track of implementation revision Andrew Jones
2018-07-16 13:06 ` [PATCH v4 03/10] KVM: arm/arm64: vgic: GICv2 IGROUPR should read as zero Christoffer Dall
2018-07-19 18:16 ` Andrew Jones
2018-07-19 20:56 ` Christoffer Dall
2018-07-16 13:06 ` [PATCH v4 04/10] KVM: arm/arm64: vgic: Add group field to struct irq Christoffer Dall
2018-07-19 16:16 ` Andrew Jones
2018-07-16 13:06 ` [PATCH v4 05/10] KVM: arm/arm64: vgic: Signal IRQs using their configured group Christoffer Dall
2018-07-19 16:28 ` Andrew Jones
2018-07-16 13:06 ` [PATCH v4 06/10] KVM: arm/arm64: vgic: Permit uaccess writes to return errors Christoffer Dall
2018-07-19 16:31 ` Andrew Jones
2018-07-16 13:06 ` [PATCH v4 07/10] KVM: arm/arm64: vgic: Return error on incompatible uaccess GICD_IIDR writes Christoffer Dall
2018-07-16 15:43 ` Bharat Bhushan
2018-07-17 9:10 ` Christoffer Dall
2018-07-19 17:09 ` Andrew Jones
2018-07-16 13:06 ` [PATCH v4 08/10] KVM: arm/arm64: vgic: Allow configuration of interrupt groups Christoffer Dall
2018-07-19 17:26 ` Andrew Jones
2018-07-16 13:06 ` [PATCH v4 09/10] KVM: arm/arm64: vgic: Let userspace opt-in to writable v2 IGROUPR Christoffer Dall
2018-07-19 18:17 ` Andrew Jones
2018-07-16 13:06 ` [PATCH v4 10/10] KVM: arm/arm64: vgic: Update documentation of the GIC devices wrt IIDR Christoffer Dall
2018-07-16 15:59 ` Bharat Bhushan
2018-07-17 9:13 ` Christoffer Dall
2018-07-18 10:45 ` Bharat Bhushan
2018-07-19 17:08 ` Andrew Jones
2018-07-19 20:57 ` Christoffer Dall
2018-07-20 10:12 ` [PATCH v4 00/10] KVM: arm/arm64: vgic: Virtual interrupt grouping support Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1531746387-7033-3-git-send-email-christoffer.dall@arm.com \
--to=christoffer.dall@arm.com \
--cc=andre.przywara@arm.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=marc.zyngier@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox