From mboxrd@z Thu Jan 1 00:00:00 1970 From: Carlo Marcelo Arenas Belon Subject: Re: boot stops after console handover? Date: Sat, 12 Jan 2008 21:10:33 -0600 Message-ID: <20080113031033.GA21813@tapir> References: <47812BC3.6060503@nagafix.co.uk> <4781EDE3.2000008@qumranet.com> <47827DE4.2020306@nagafix.co.uk> <47833572.7090902@qumranet.com> <4783C6CC.1050404@nagafix.co.uk> <478901D7.1060404@nagafix.co.uk> <47892AA8.6090406@qumranet.com> <20080112222501.GA17084@tapir> <47896711.4050909@nagafix.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: kvm-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, Linux Kernel Development , Avi Kivity To: Antoine Martin Return-path: Content-Disposition: inline In-Reply-To: <47896711.4050909-pzR7fkEi+fEqdlJmJB21zg@public.gmane.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: kvm-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: kvm-devel-bounces-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: kvm.vger.kernel.org On Sun, Jan 13, 2008 at 01:19:13AM +0000, Antoine Martin wrote: > Carlo Marcelo Arenas Belon wrote: > > On Sat, Jan 12, 2008 at 11:01:28PM +0200, Avi Kivity wrote: > >> Antoine Martin wrote: > >> > >>> FYI, just tried building 2.6.24-rc7-git4 and got this warning: > >>> (...) > >> Probably harmless, but worth reporting to lkml. > > > > couldn't replicate it here, but I'd seen usually those kind of errors > > when building a kernel that hasn't been "mrproper" between re-configurations > > > cp .config ../config-2.6.24-rc7-git4 > make mrproper > cp ../config-2.6.24-rc7-git4 .config make oldconfig # presumed > make -j 4 replicated with your configuration, but can't still reproduce it with mine even when forcing as you do CONFIG_KVM=y CONFIG_KVM_INTEL=y available from : http://tapir.sajinet.com.pe/kvm/config-2.6.24-rc7-git4 > (...) > MODPOST vmlinux.o > WARNING: vmlinux.o(.text+0x2cb657): Section mismatch: reference to > .init.text:register_cpu_notifier (between 'kvm_init_x86' and 'kvm_sched_in') > WARNING: vmlinux.o(.text.head+0xe4): Section mismatch: reference to > .init.data.2:trampoline_level4_pgt (between 'ident_complete' and > 'secondary_startup_64') > WARNING: vmlinux.o(.text.head+0xeb): Section mismatch: reference to > .init.data.2:trampoline_level4_pgt (between 'ident_complete' and > 'secondary_startup_64') > LD vmlinux > SYSMAP System.map > SYSMAP .tmp_System.map > > You can grab the .config here: > http://194.145.196.85/kvm/config-2.6.24-rc7-git4 is this the configuration for the host kernel? if you want to use the last code for kvm you should have CONFIG_KVM disabled and instead use the external module as instructed in (HINT: you don't have a patched kernel) : http://kvm.qumranet.com/kvmwiki/HOWTO1 not sure which version will be part of 2.6.24 but I suspect it might not be kvm 59. Carlo ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace