public inbox for kvm@vger.kernel.org
 help / color / mirror / Atom feed
From: Joerg Roedel <joro@8bytes.org>
To: Alexander Graf <agraf@suse.de>
Cc: kvm@vger.kernel.org, anthony@codemonkey.ws, avi@redhat.com
Subject: Re: [PATCH 2/9] Add helper functions for nested SVM v5
Date: Wed, 29 Oct 2008 14:48:49 +0100	[thread overview]
Message-ID: <20081029134849.GD11682@8bytes.org> (raw)
In-Reply-To: <1224522290-11740-3-git-send-email-agraf@suse.de>

On Mon, Oct 20, 2008 at 07:04:43PM +0200, Alexander Graf wrote:
> These are helpers for the nested SVM implementation.
> 
> - nsvm_printk implements a debug printk variant
> - nested_svm_do calls a handler that can accesses gpa-based memory
> 
> v3 makes use of the new permission checker
> 
> Signed-off-by: Alexander Graf <agraf@suse.de>
> ---
>  arch/x86/kvm/svm.c |   88 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 88 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
> index 4ee5376..a00421b 100644
> --- a/arch/x86/kvm/svm.c
> +++ b/arch/x86/kvm/svm.c
> @@ -48,6 +48,16 @@ MODULE_LICENSE("GPL");
>  
>  #define DEBUGCTL_RESERVED_BITS (~(0x3fULL))
>  
> +/* Turn on to get debugging output*/
> +/* #define NESTED_DEBUG */
> +
> +#ifdef NESTED_DEBUG
> +#define nsvm_printk(fmt, args...) printk(KERN_INFO fmt, ## args)
> +#else
> +static inline void nsvm_printk(char *fmt, ...) {
> +}
> +#endif
> +
>  /* enable NPT for AMD64 and X86 with PAE */
>  #if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
>  static bool npt_enabled = true;
> @@ -1145,6 +1155,84 @@ static int vmmcall_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
>  	return 1;
>  }
>  
> +static int nested_svm_check_permissions(struct vcpu_svm *svm)
> +{
> +	if (svm->vmcb->save.cpl) {
> +		printk(KERN_ERR "%s: invalid cpl 0x%x at ip 0x%lx\n",
> +		       __func__, svm->vmcb->save.cpl, kvm_rip_read(&svm->vcpu));

This is not really a kernel error. Please remove this printk. It allows
the guest to flood the logfiles of the host.

> +		kvm_queue_exception(&svm->vcpu, GP_VECTOR);
> +		return 1;
> +	}
> +
> +       if (!(svm->vcpu.arch.shadow_efer & MSR_EFER_SVME_MASK)
> +           || !is_paging(&svm->vcpu)) {
> +               kvm_queue_exception(&svm->vcpu, UD_VECTOR);
> +               return 1;
> +       }
> +
> +       return 0;
> +}
> +
> +static struct page *nested_svm_get_page(struct vcpu_svm *svm, u64 gpa)
> +{
> +	struct page *page;
> +
> +	down_read(&current->mm->mmap_sem);
> +	page = gfn_to_page(svm->vcpu.kvm, gpa >> PAGE_SHIFT);
> +	up_read(&current->mm->mmap_sem);
> +
> +	if (is_error_page(page)) {
> +		printk(KERN_ERR "%s: could not find page at 0x%llx\n",
> +		       __func__, gpa);
> +		kvm_release_page_clean(page);
> +		kvm_queue_exception(&svm->vcpu, GP_VECTOR);
> +		return NULL;
> +	}
> +	return page;
> +}
> +
> +static int nested_svm_do(struct vcpu_svm *svm,
> +			 u64 arg1_gpa, u64 arg2_gpa, void *opaque,
> +			 int (*handler)(struct vcpu_svm *svm,
> +					void *arg1,
> +					void *arg2,
> +					void *opaque))
> +{
> +	struct page *arg1_page;
> +	struct page *arg2_page = NULL;
> +	void *arg1;
> +	void *arg2 = NULL;
> +	int retval;
> +
> +	arg1_page = nested_svm_get_page(svm, arg1_gpa);
> +	if(arg1_page == NULL)
> +		return 1;
> +
> +	if (arg2_gpa) {
> +		arg2_page = nested_svm_get_page(svm, arg2_gpa);
> +		if(arg2_page == NULL) {
> +			kvm_release_page_clean(arg1_page);
> +			return 1;
> +		}
> +	}
> +
> +	arg1 = kmap_atomic(arg1_page, KM_USER0);
> +	if (arg2_gpa)
> +		arg2 = kmap_atomic(arg2_page, KM_USER1);
> +
> +	retval = handler(svm, arg1, arg2, opaque);
> +
> +	kunmap_atomic(arg1, KM_USER0);
> +	if (arg2_gpa)
> +		kunmap_atomic(arg2, KM_USER1);
> +
> +	kvm_release_page_dirty(arg1_page);
> +	if (arg2_gpa)
> +		kvm_release_page_dirty(arg2_page);
> +
> +	return retval;
> +}
> +
>  static int invalid_op_interception(struct vcpu_svm *svm,
>  				   struct kvm_run *kvm_run)
>  {
> -- 
> 1.5.6

  parent reply	other threads:[~2008-10-29 13:48 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-20 17:04 [PATCH 0/9] Add support for nested SVM (kernel) v5 Alexander Graf
2008-10-20 17:04 ` [PATCH 1/9] Clean up VINTR setting v5 Alexander Graf
2008-10-20 17:04   ` [PATCH 2/9] Add helper functions for nested SVM v5 Alexander Graf
2008-10-20 17:04     ` [PATCH 3/9] Implement GIF, clgi and stgi v5 Alexander Graf
2008-10-20 17:04       ` [PATCH 4/9] Implement hsave v5 Alexander Graf
2008-10-20 17:04         ` [PATCH 5/9] Add VMLOAD and VMSAVE handlers v5 Alexander Graf
2008-10-20 17:04           ` [PATCH 6/9] Add VMRUN handler v5 Alexander Graf
2008-10-20 17:04             ` [PATCH 7/9] Add VMEXIT handler and intercepts v5 Alexander Graf
2008-10-20 17:04               ` [PATCH 8/9] allow read access to MSR_VM_VR Alexander Graf
2008-10-20 17:04                 ` [PATCH 9/9] Allow setting the SVME bit v5 Alexander Graf
2008-10-29 13:58                   ` Joerg Roedel
2008-10-29 14:03                     ` Alexander Graf
2008-10-29 14:17                       ` Avi Kivity
2008-10-29 14:07                     ` Avi Kivity
2008-10-30 19:16                   ` Anthony Liguori
2008-10-30 19:24                     ` Avi Kivity
2008-10-30 20:46                       ` Alexander Graf
2008-10-30 20:44                     ` Alexander Graf
2008-10-30 20:52                       ` Anthony Liguori
2008-11-02  9:11                         ` Avi Kivity
2008-11-03  7:37                           ` Alexander Graf
2008-11-03 13:54                             ` Avi Kivity
2008-10-30 19:15                 ` [PATCH 8/9] allow read access to MSR_VM_VR Anthony Liguori
2008-10-31 10:57                   ` Joerg Roedel
2008-10-28 18:38             ` Add VMRUN handler v5 Mike Day
2008-10-29  5:35               ` Alexander Graf
2008-11-18 14:14             ` [PATCH 6/9] " Muli Ben-Yehuda
2008-10-30 18:06           ` [PATCH 5/9] Add VMLOAD and VMSAVE handlers v5 Anthony Liguori
2008-10-30 18:44             ` Alexander Graf
2008-10-30 19:14               ` Anthony Liguori
2008-10-30 21:02                 ` Alexander Graf
2008-10-30 21:38                   ` Anthony Liguori
2008-10-30 18:04         ` [PATCH 4/9] Implement hsave v5 Anthony Liguori
2008-10-30 18:43           ` Alexander Graf
2008-10-30 19:05             ` Anthony Liguori
2008-10-30 19:29             ` Avi Kivity
2008-10-30 20:38               ` Alexander Graf
2008-10-30 20:44                 ` Anthony Liguori
2008-10-30 20:47                   ` Alexander Graf
2008-10-30 22:05                     ` Anthony Liguori
2008-11-02  9:24                 ` Avi Kivity
2008-10-27 19:09       ` Implement GIF, clgi and stgi v5 Mike Day
2008-10-27 19:29         ` Avi Kivity
2008-10-27 19:40           ` Mike Day
2008-10-30 18:02       ` [PATCH 3/9] " Anthony Liguori
2008-10-30 18:10         ` Avi Kivity
2008-10-30 18:35           ` Alexander Graf
2008-10-30 19:08             ` Anthony Liguori
2008-10-30 19:11           ` Anthony Liguori
2008-10-29 13:48     ` Joerg Roedel [this message]
2008-10-30 17:56     ` [PATCH 2/9] Add helper functions for nested SVM v5 Anthony Liguori
2008-10-30 18:41       ` Alexander Graf
2008-10-30 19:10         ` Anthony Liguori

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081029134849.GD11682@8bytes.org \
    --to=joro@8bytes.org \
    --cc=agraf@suse.de \
    --cc=anthony@codemonkey.ws \
    --cc=avi@redhat.com \
    --cc=kvm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox