From: Gleb Natapov <gleb@redhat.com>
To: avi@redhat.com
Cc: glommer@redhat.com, kvm@vger.kernel.org
Subject: [PATCH] various fixes for CPU/PCI hotplug
Date: Tue, 3 Feb 2009 16:01:29 +0200 [thread overview]
Message-ID: <20090203140129.GC30234@redhat.com> (raw)
Hi,
The fixed problems are:
1) Disabled processor _STA method should return 0 (this fixes Vista's
resume after hibernate problem)
2) Disabled processor _MAT method should return disabled MADT entry
instead of 0
3) Fix number of hot pluggable CPUs to be 16
4) Properly handle write to GPE STS register (write 1 should clear bit)
5) Generate interrupt only if corespondent EN bit is set
5) Use reserved STS bits from PIIX4 chipset to avoid clash in the
future.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
diff --git a/bios/acpi-dsdt.dsl b/bios/acpi-dsdt.dsl
index d67616d..c400382 100755
--- a/bios/acpi-dsdt.dsl
+++ b/bios/acpi-dsdt.dsl
@@ -27,28 +27,29 @@ DefinitionBlock (
{
Scope (\_PR)
{
- OperationRegion( PRST, SystemIO, 0xaf00, 0x02)
- Field (PRST, ByteAcc, NoLock, WriteAsZeros)
+ OperationRegion( PRST, SystemIO, 0xaf00, 0x04)
+ Field (PRST, WordAcc, NoLock, Preserve)
{
- PRU, 8,
- PRD, 8,
+ PRU, 16,
+ PRD, 16,
}
#define gen_processor(nr, name) \
Processor (CPU##name, nr, 0x0000b010, 0x06) { \
- Name (TMP, Buffer(0x8) {0x0, 0x8, nr, nr, 0x1, 0x0, 0x0, 0x0}) \
+ Name (PREN, Buffer(0x8) {0x0, 0x8, nr, nr, 0x1, 0x0, 0x0, 0x0}) \
+ Name (PRDS, Buffer(0x8) {0x0, 0x8, nr, nr, 0x0, 0x0, 0x0, 0x0}) \
Method(_MAT, 0) { \
- If (And(\_PR.PRU, ShiftLeft(1, nr))) { Return(TMP) } \
- Else { Return(0x0) } \
+ If (And(\_PR.PRU, ShiftLeft(1, nr))) { Return(PREN) } \
+ Else { Return(PRDS) } \
} \
Method (_STA) { \
- Return(0xF) \
+ If (And(\_PR.PRU, ShiftLeft(1, nr))) { Return(0xF) } \
+ Else { Return(0x0) } \
} \
} \
-
- Processor (CPU0, 0x00, 0x0000b010, 0x06) {Method (_STA) { Return(0xF)}}
+ gen_processor(0, 0)
gen_processor(1, 1)
gen_processor(2, 2)
gen_processor(3, 3)
@@ -63,6 +64,28 @@ DefinitionBlock (
gen_processor(12, C)
gen_processor(13, D)
gen_processor(14, E)
+
+ Method (NTFY, 2, NotSerialized) {
+#define gen_ntfy(nr) \
+ If (LEqual(Arg0, 0x##nr)) { \
+ Notify(CPU##nr, Arg1) \
+ }
+ gen_ntfy(0)
+ gen_ntfy(1)
+ gen_ntfy(2)
+ gen_ntfy(3)
+ gen_ntfy(4)
+ gen_ntfy(5)
+ gen_ntfy(6)
+ gen_ntfy(7)
+ gen_ntfy(8)
+ gen_ntfy(9)
+ gen_ntfy(A)
+ gen_ntfy(B)
+ gen_ntfy(C)
+ gen_ntfy(D)
+ gen_ntfy(E)
+ }
}
Scope (\)
@@ -666,33 +689,12 @@ DefinitionBlock (
Zero, /* reserved */
Zero /* reserved */
})
+
Scope (\_GPE)
{
-
-#define gen_cpu_hotplug(name, nr) \
- If (And(\_PR.PRU, ShiftLeft(1, nr))) { \
- Notify(\_PR.CPU##name, 1) \
- } \
- If (And(\_PR.PRD, ShiftLeft(1, nr))) { \
- Notify(\_PR.CPU##name, 3) \
- }
+ Name(_HID, "ACPI0006")
Method(_L00) {
- gen_cpu_hotplug(1, 1)
- gen_cpu_hotplug(2, 2)
- gen_cpu_hotplug(3, 3)
- gen_cpu_hotplug(4, 4)
- gen_cpu_hotplug(5, 5)
- gen_cpu_hotplug(6, 6)
- gen_cpu_hotplug(7, 7)
- gen_cpu_hotplug(8, 8)
- gen_cpu_hotplug(9, 9)
- gen_cpu_hotplug(A, 10)
- gen_cpu_hotplug(B, 11)
- gen_cpu_hotplug(C, 12)
- gen_cpu_hotplug(D, 13)
- gen_cpu_hotplug(E, 14)
-
Return(0x01)
}
@@ -739,9 +741,29 @@ DefinitionBlock (
Return(0x01)
}
+
Method(_L02) {
+ Store(Zero, Local3)
+ Store(\_PR.PRU, Local2)
+ Xor(Local2, \_PR.PRD, Local0)
+ Store(Local2, \_PR.PRD)
+ Store(\_PR.PRD, Local1)
+ While (LNotEqual (Local0, Zero)) {
+ Store(ShiftLeft(1, Local3), Local1)
+ If (And(Local0, Local1)) {
+ Store(And(Local0, Not(Local1)), Local0)
+ If (And(Local2, Local1)) {
+ Store(1, Local4)
+ } Else {
+ Store(3, Local4)
+ }
+ \_PR.NTFY(Local3, Local4)
+ }
+ Increment(Local3)
+ }
Return(0x01)
}
+
Method(_L03) {
Return(0x01)
}
diff --git a/qemu/hw/acpi.c b/qemu/hw/acpi.c
index b998225..337432a 100644
--- a/qemu/hw/acpi.c
+++ b/qemu/hw/acpi.c
@@ -578,8 +578,8 @@ void qemu_system_powerdown(void)
struct gpe_regs {
uint16_t sts; /* status */
uint16_t en; /* enabled */
- uint8_t up;
- uint8_t down;
+ uint16_t cpus_sts;
+ uint16_t bios_cpus_sts;
};
struct pci_status {
@@ -590,29 +590,34 @@ struct pci_status {
static struct gpe_regs gpe;
static struct pci_status pci0_status;
+static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
+{
+ if (addr & 1)
+ return (val >> 8) & 0xff;
+ return val & 0xff;
+}
+
static uint32_t gpe_readb(void *opaque, uint32_t addr)
{
uint32_t val = 0;
struct gpe_regs *g = opaque;
switch (addr) {
case PROC_BASE:
- val = g->up;
- break;
case PROC_BASE + 1:
- val = g->down;
+ val = gpe_read_val(g->cpus_sts, addr);
+ break;
+ case PROC_BASE + 2:
+ case PROC_BASE + 3:
+ val = gpe_read_val(g->bios_cpus_sts, addr);
break;
case GPE_BASE:
- val = g->sts & 0xFF;
- break;
case GPE_BASE + 1:
- val = (g->sts >> 8) & 0xFF;
+ val = gpe_read_val(g->sts, addr);
break;
case GPE_BASE + 2:
- val = g->en & 0xFF;
- break;
case GPE_BASE + 3:
- val = (g->en >> 8) & 0xFF;
+ val = gpe_read_val(g->en, addr);
break;
default:
break;
@@ -624,28 +629,45 @@ static uint32_t gpe_readb(void *opaque, uint32_t addr)
return val;
}
+static uint16_t gpe_write_val(uint16_t cur, int addr, uint32_t val)
+{
+ if (addr & 1)
+ return (cur & 0xff) | (val << 8);
+ return (cur & 0xff00) | (val & 0xff);
+}
+
+static uint16_t gpe_reset_val(uint16_t cur, int addr, uint32_t val)
+{
+ uint16_t x1, x0 = val & 0xff;
+ int shift = (addr & 1) ? 8 : 0;
+
+ x1 = (cur >> shift) & 0xff;
+
+ x1 = x1 & ~x0;
+
+ return (cur & (0xff << (8 - shift))) | (x1 << shift);
+}
+
static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
{
struct gpe_regs *g = opaque;
switch (addr) {
case PROC_BASE:
- g->up = val;
- break;
case PROC_BASE + 1:
- g->down = val;
+ /* don't allow to change cpu_sts from inside a guest */
+ break;
+ case PROC_BASE + 2:
+ case PROC_BASE + 3:
+ g->bios_cpus_sts = gpe_write_val(g->bios_cpus_sts, addr, val);
break;
case GPE_BASE:
- g->sts = (g->sts & ~0xFFFF) | (val & 0xFFFF);
- break;
case GPE_BASE + 1:
- g->sts = (g->sts & 0xFFFF) | (val << 8);
+ g->sts = gpe_reset_val(g->sts, addr, val);
break;
case GPE_BASE + 2:
- g->en = (g->en & ~0xFFFF) | (val & 0xFFFF);
- break;
case GPE_BASE + 3:
- g->en = (g->en & 0xFFFF) | (val << 8);
+ g->en = gpe_write_val(g->en, addr, val);
break;
default:
break;
@@ -717,6 +739,7 @@ static const char *model;
void qemu_system_hot_add_init(const char *cpu_model)
{
+ gpe.bios_cpus_sts = gpe.cpus_sts = (1 << smp_cpus) - 1;
register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, &gpe);
register_ioport_read(GPE_BASE, 4, 1, gpe_readb, &gpe);
@@ -734,16 +757,14 @@ void qemu_system_hot_add_init(const char *cpu_model)
static void enable_processor(struct gpe_regs *g, int cpu)
{
- g->sts |= 1;
- g->en |= 1;
- g->up |= (1 << cpu);
+ g->sts |= 4;
+ g->cpus_sts |= (1 << cpu);
}
static void disable_processor(struct gpe_regs *g, int cpu)
{
- g->sts |= 1;
- g->en |= 1;
- g->down |= (1 << cpu);
+ g->sts |= 4;
+ g->cpus_sts &= ~(1 << cpu);
}
#if defined(TARGET_I386) || defined(TARGET_X86_64)
@@ -784,39 +805,40 @@ void qemu_system_cpu_hot_add(int cpu, int state)
#endif
}
- qemu_set_irq(pm_state->irq, 1);
- gpe.up = 0;
- gpe.down = 0;
if (state)
enable_processor(&gpe, cpu);
else
disable_processor(&gpe, cpu);
- qemu_set_irq(pm_state->irq, 0);
+ if (gpe.en & 4) {
+ qemu_set_irq(pm_state->irq, 1);
+ qemu_set_irq(pm_state->irq, 0);
+ }
}
#endif
static void enable_device(struct pci_status *p, struct gpe_regs *g, int slot)
{
g->sts |= 2;
- g->en |= 2;
p->up |= (1 << slot);
}
static void disable_device(struct pci_status *p, struct gpe_regs *g, int slot)
{
g->sts |= 2;
- g->en |= 2;
p->down |= (1 << slot);
}
void qemu_system_device_hot_add(int pcibus, int slot, int state)
{
- qemu_set_irq(pm_state->irq, 1);
pci0_status.up = 0;
pci0_status.down = 0;
if (state)
enable_device(&pci0_status, &gpe, slot);
else
disable_device(&pci0_status, &gpe, slot);
- qemu_set_irq(pm_state->irq, 0);
+
+ if (gpe.en & 2) {
+ qemu_set_irq(pm_state->irq, 1);
+ qemu_set_irq(pm_state->irq, 0);
+ }
}
--
Gleb.
next reply other threads:[~2009-02-03 14:03 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-03 14:01 Gleb Natapov [this message]
2009-02-03 14:46 ` [PATCH] various fixes for CPU/PCI hotplug dima
2009-02-03 15:13 ` Gleb Natapov
2009-02-03 16:43 ` Marcelo Tosatti
2009-02-03 16:47 ` Gleb Natapov
2009-02-03 18:58 ` Glauber Costa
2009-02-03 19:11 ` Marcelo Tosatti
2009-02-03 20:27 ` Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090203140129.GC30234@redhat.com \
--to=gleb@redhat.com \
--cc=avi@redhat.com \
--cc=glommer@redhat.com \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox