From: Gleb Natapov <gleb@redhat.com>
To: dima <d.vasilets@peterhost.ru>
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH] various fixes for CPU/PCI hotplug
Date: Tue, 3 Feb 2009 17:13:16 +0200 [thread overview]
Message-ID: <20090203151316.GB29674@redhat.com> (raw)
In-Reply-To: <200902031746.28565.d.vasilets@peterhost.ru>
On Tue, Feb 03, 2009 at 05:46:28PM +0300, dima wrote:
> how to add new cpu by hotplug to running system ?
>
See cpu_set command in the monitor.
>
> On Tuesday 03 February 2009 17:01:29 Gleb Natapov wrote:
> > Hi,
> >
> > The fixed problems are:
> > 1) Disabled processor _STA method should return 0 (this fixes Vista's
> > resume after hibernate problem)
> > 2) Disabled processor _MAT method should return disabled MADT entry
> > instead of 0
> > 3) Fix number of hot pluggable CPUs to be 16
> > 4) Properly handle write to GPE STS register (write 1 should clear bit)
> > 5) Generate interrupt only if corespondent EN bit is set
> > 5) Use reserved STS bits from PIIX4 chipset to avoid clash in the
> > future.
> >
> > Signed-off-by: Gleb Natapov <gleb@redhat.com>
> > diff --git a/bios/acpi-dsdt.dsl b/bios/acpi-dsdt.dsl
> > index d67616d..c400382 100755
> > --- a/bios/acpi-dsdt.dsl
> > +++ b/bios/acpi-dsdt.dsl
> > @@ -27,28 +27,29 @@ DefinitionBlock (
> > {
> > Scope (\_PR)
> > {
> > - OperationRegion( PRST, SystemIO, 0xaf00, 0x02)
> > - Field (PRST, ByteAcc, NoLock, WriteAsZeros)
> > + OperationRegion( PRST, SystemIO, 0xaf00, 0x04)
> > + Field (PRST, WordAcc, NoLock, Preserve)
> > {
> > - PRU, 8,
> > - PRD, 8,
> > + PRU, 16,
> > + PRD, 16,
> > }
> >
> > #define gen_processor(nr, name) \
> > Processor (CPU##name, nr, 0x0000b010, 0x06) { \
> > - Name (TMP, Buffer(0x8) {0x0, 0x8, nr, nr, 0x1, 0x0, 0x0, 0x0})
> > \ + Name (PREN, Buffer(0x8) {0x0, 0x8, nr, nr, 0x1, 0x0, 0x0,
> > 0x0}) \ + Name (PRDS, Buffer(0x8) {0x0, 0x8, nr, nr, 0x0, 0x0,
> > 0x0, 0x0}) \ Method(_MAT, 0) {
> > \ - If (And(\_PR.PRU, ShiftLeft(1, nr))) { Return(TMP) }
> > \ - Else { Return(0x0) }
> > \ + If (And(\_PR.PRU, ShiftLeft(1, nr))) {
> > Return(PREN) } \ + Else { Return(PRDS) }
> > \ }
> > \ Method (_STA) {
> > \ - Return(0xF)
> > \ + If (And(\_PR.PRU, ShiftLeft(1, nr))) {
> > Return(0xF) } \ + Else { Return(0x0) }
> > \ }
> > \ }
> > \
> >
> >
> > -
> > - Processor (CPU0, 0x00, 0x0000b010, 0x06) {Method (_STA) {
> > Return(0xF)}} + gen_processor(0, 0)
> > gen_processor(1, 1)
> > gen_processor(2, 2)
> > gen_processor(3, 3)
> > @@ -63,6 +64,28 @@ DefinitionBlock (
> > gen_processor(12, C)
> > gen_processor(13, D)
> > gen_processor(14, E)
> > +
> > + Method (NTFY, 2, NotSerialized) {
> > +#define gen_ntfy(nr) \
> > + If (LEqual(Arg0, 0x##nr)) { \
> > + Notify(CPU##nr, Arg1) \
> > + }
> > + gen_ntfy(0)
> > + gen_ntfy(1)
> > + gen_ntfy(2)
> > + gen_ntfy(3)
> > + gen_ntfy(4)
> > + gen_ntfy(5)
> > + gen_ntfy(6)
> > + gen_ntfy(7)
> > + gen_ntfy(8)
> > + gen_ntfy(9)
> > + gen_ntfy(A)
> > + gen_ntfy(B)
> > + gen_ntfy(C)
> > + gen_ntfy(D)
> > + gen_ntfy(E)
> > + }
> > }
> >
> > Scope (\)
> > @@ -666,33 +689,12 @@ DefinitionBlock (
> > Zero, /* reserved */
> > Zero /* reserved */
> > })
> > +
> > Scope (\_GPE)
> > {
> > -
> > -#define gen_cpu_hotplug(name, nr) \
> > - If (And(\_PR.PRU, ShiftLeft(1, nr))) { \
> > - Notify(\_PR.CPU##name, 1) \
> > - } \
> > - If (And(\_PR.PRD, ShiftLeft(1, nr))) { \
> > - Notify(\_PR.CPU##name, 3) \
> > - }
> > + Name(_HID, "ACPI0006")
> >
> > Method(_L00) {
> > - gen_cpu_hotplug(1, 1)
> > - gen_cpu_hotplug(2, 2)
> > - gen_cpu_hotplug(3, 3)
> > - gen_cpu_hotplug(4, 4)
> > - gen_cpu_hotplug(5, 5)
> > - gen_cpu_hotplug(6, 6)
> > - gen_cpu_hotplug(7, 7)
> > - gen_cpu_hotplug(8, 8)
> > - gen_cpu_hotplug(9, 9)
> > - gen_cpu_hotplug(A, 10)
> > - gen_cpu_hotplug(B, 11)
> > - gen_cpu_hotplug(C, 12)
> > - gen_cpu_hotplug(D, 13)
> > - gen_cpu_hotplug(E, 14)
> > -
> > Return(0x01)
> > }
> >
> > @@ -739,9 +741,29 @@ DefinitionBlock (
> >
> > Return(0x01)
> > }
> > +
> > Method(_L02) {
> > + Store(Zero, Local3)
> > + Store(\_PR.PRU, Local2)
> > + Xor(Local2, \_PR.PRD, Local0)
> > + Store(Local2, \_PR.PRD)
> > + Store(\_PR.PRD, Local1)
> > + While (LNotEqual (Local0, Zero)) {
> > + Store(ShiftLeft(1, Local3), Local1)
> > + If (And(Local0, Local1)) {
> > + Store(And(Local0, Not(Local1)), Local0)
> > + If (And(Local2, Local1)) {
> > + Store(1, Local4)
> > + } Else {
> > + Store(3, Local4)
> > + }
> > + \_PR.NTFY(Local3, Local4)
> > + }
> > + Increment(Local3)
> > + }
> > Return(0x01)
> > }
> > +
> > Method(_L03) {
> > Return(0x01)
> > }
> > diff --git a/qemu/hw/acpi.c b/qemu/hw/acpi.c
> > index b998225..337432a 100644
> > --- a/qemu/hw/acpi.c
> > +++ b/qemu/hw/acpi.c
> > @@ -578,8 +578,8 @@ void qemu_system_powerdown(void)
> > struct gpe_regs {
> > uint16_t sts; /* status */
> > uint16_t en; /* enabled */
> > - uint8_t up;
> > - uint8_t down;
> > + uint16_t cpus_sts;
> > + uint16_t bios_cpus_sts;
> > };
> >
> > struct pci_status {
> > @@ -590,29 +590,34 @@ struct pci_status {
> > static struct gpe_regs gpe;
> > static struct pci_status pci0_status;
> >
> > +static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
> > +{
> > + if (addr & 1)
> > + return (val >> 8) & 0xff;
> > + return val & 0xff;
> > +}
> > +
> > static uint32_t gpe_readb(void *opaque, uint32_t addr)
> > {
> > uint32_t val = 0;
> > struct gpe_regs *g = opaque;
> > switch (addr) {
> > case PROC_BASE:
> > - val = g->up;
> > - break;
> > case PROC_BASE + 1:
> > - val = g->down;
> > + val = gpe_read_val(g->cpus_sts, addr);
> > + break;
> > + case PROC_BASE + 2:
> > + case PROC_BASE + 3:
> > + val = gpe_read_val(g->bios_cpus_sts, addr);
> > break;
> >
> > case GPE_BASE:
> > - val = g->sts & 0xFF;
> > - break;
> > case GPE_BASE + 1:
> > - val = (g->sts >> 8) & 0xFF;
> > + val = gpe_read_val(g->sts, addr);
> > break;
> > case GPE_BASE + 2:
> > - val = g->en & 0xFF;
> > - break;
> > case GPE_BASE + 3:
> > - val = (g->en >> 8) & 0xFF;
> > + val = gpe_read_val(g->en, addr);
> > break;
> > default:
> > break;
> > @@ -624,28 +629,45 @@ static uint32_t gpe_readb(void *opaque, uint32_t
> > addr) return val;
> > }
> >
> > +static uint16_t gpe_write_val(uint16_t cur, int addr, uint32_t val)
> > +{
> > + if (addr & 1)
> > + return (cur & 0xff) | (val << 8);
> > + return (cur & 0xff00) | (val & 0xff);
> > +}
> > +
> > +static uint16_t gpe_reset_val(uint16_t cur, int addr, uint32_t val)
> > +{
> > + uint16_t x1, x0 = val & 0xff;
> > + int shift = (addr & 1) ? 8 : 0;
> > +
> > + x1 = (cur >> shift) & 0xff;
> > +
> > + x1 = x1 & ~x0;
> > +
> > + return (cur & (0xff << (8 - shift))) | (x1 << shift);
> > +}
> > +
> > static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
> > {
> > struct gpe_regs *g = opaque;
> > switch (addr) {
> > case PROC_BASE:
> > - g->up = val;
> > - break;
> > case PROC_BASE + 1:
> > - g->down = val;
> > + /* don't allow to change cpu_sts from inside a guest */
> > + break;
> > + case PROC_BASE + 2:
> > + case PROC_BASE + 3:
> > + g->bios_cpus_sts = gpe_write_val(g->bios_cpus_sts, addr, val);
> > break;
> >
> > case GPE_BASE:
> > - g->sts = (g->sts & ~0xFFFF) | (val & 0xFFFF);
> > - break;
> > case GPE_BASE + 1:
> > - g->sts = (g->sts & 0xFFFF) | (val << 8);
> > + g->sts = gpe_reset_val(g->sts, addr, val);
> > break;
> > case GPE_BASE + 2:
> > - g->en = (g->en & ~0xFFFF) | (val & 0xFFFF);
> > - break;
> > case GPE_BASE + 3:
> > - g->en = (g->en & 0xFFFF) | (val << 8);
> > + g->en = gpe_write_val(g->en, addr, val);
> > break;
> > default:
> > break;
> > @@ -717,6 +739,7 @@ static const char *model;
> >
> > void qemu_system_hot_add_init(const char *cpu_model)
> > {
> > + gpe.bios_cpus_sts = gpe.cpus_sts = (1 << smp_cpus) - 1;
> > register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, &gpe);
> > register_ioport_read(GPE_BASE, 4, 1, gpe_readb, &gpe);
> >
> > @@ -734,16 +757,14 @@ void qemu_system_hot_add_init(const char *cpu_model)
> >
> > static void enable_processor(struct gpe_regs *g, int cpu)
> > {
> > - g->sts |= 1;
> > - g->en |= 1;
> > - g->up |= (1 << cpu);
> > + g->sts |= 4;
> > + g->cpus_sts |= (1 << cpu);
> > }
> >
> > static void disable_processor(struct gpe_regs *g, int cpu)
> > {
> > - g->sts |= 1;
> > - g->en |= 1;
> > - g->down |= (1 << cpu);
> > + g->sts |= 4;
> > + g->cpus_sts &= ~(1 << cpu);
> > }
> >
> > #if defined(TARGET_I386) || defined(TARGET_X86_64)
> > @@ -784,39 +805,40 @@ void qemu_system_cpu_hot_add(int cpu, int state)
> > #endif
> > }
> >
> > - qemu_set_irq(pm_state->irq, 1);
> > - gpe.up = 0;
> > - gpe.down = 0;
> > if (state)
> > enable_processor(&gpe, cpu);
> > else
> > disable_processor(&gpe, cpu);
> > - qemu_set_irq(pm_state->irq, 0);
> > + if (gpe.en & 4) {
> > + qemu_set_irq(pm_state->irq, 1);
> > + qemu_set_irq(pm_state->irq, 0);
> > + }
> > }
> > #endif
> >
> > static void enable_device(struct pci_status *p, struct gpe_regs *g, int
> > slot) {
> > g->sts |= 2;
> > - g->en |= 2;
> > p->up |= (1 << slot);
> > }
> >
> > static void disable_device(struct pci_status *p, struct gpe_regs *g, int
> > slot) {
> > g->sts |= 2;
> > - g->en |= 2;
> > p->down |= (1 << slot);
> > }
> >
> > void qemu_system_device_hot_add(int pcibus, int slot, int state)
> > {
> > - qemu_set_irq(pm_state->irq, 1);
> > pci0_status.up = 0;
> > pci0_status.down = 0;
> > if (state)
> > enable_device(&pci0_status, &gpe, slot);
> > else
> > disable_device(&pci0_status, &gpe, slot);
> > - qemu_set_irq(pm_state->irq, 0);
> > +
> > + if (gpe.en & 2) {
> > + qemu_set_irq(pm_state->irq, 1);
> > + qemu_set_irq(pm_state->irq, 0);
> > + }
> > }
> > --
> > Gleb.
> > --
> > To unsubscribe from this list: send the line "unsubscribe kvm" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Gleb.
next prev parent reply other threads:[~2009-02-03 15:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-03 14:01 [PATCH] various fixes for CPU/PCI hotplug Gleb Natapov
2009-02-03 14:46 ` dima
2009-02-03 15:13 ` Gleb Natapov [this message]
2009-02-03 16:43 ` Marcelo Tosatti
2009-02-03 16:47 ` Gleb Natapov
2009-02-03 18:58 ` Glauber Costa
2009-02-03 19:11 ` Marcelo Tosatti
2009-02-03 20:27 ` Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090203151316.GB29674@redhat.com \
--to=gleb@redhat.com \
--cc=d.vasilets@peterhost.ru \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox