From: Alex Williamson <alex.williamson@hp.com>
To: davem@davemloft.net
Cc: rusty@rustcorp.com.au, markmc@redhat.com, netdev@vger.kernel.org,
kvm@vger.kernel.org
Subject: [PATCH v5 4/4] virtio_net: Add support for VLAN filtering in the hypervisor
Date: Wed, 04 Feb 2009 12:02:50 -0700 [thread overview]
Message-ID: <20090204190250.2512.65526.stgit@debian.lart> (raw)
In-Reply-To: <20090204190229.2512.93552.stgit@debian.lart>
VLAN filtering allows the hypervisor to drop packets from VLANs
that we're not a part of, further reducing the number of extraneous
packets recieved. This makes use of the VLAN virtqueue command class.
The CTRL_VLAN feature bit tells us whether the backend supports VLAN
filtering.
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
---
drivers/net/virtio_net.c | 31 ++++++++++++++++++++++++++++++-
include/linux/virtio_net.h | 14 ++++++++++++++
2 files changed, 44 insertions(+), 1 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index daab9c9..e68813a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -727,6 +727,30 @@ static void virtnet_set_rx_mode(struct net_device *dev)
kfree(buf);
}
+static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ struct scatterlist sg;
+
+ sg_set_buf(&sg, &vid, sizeof(vid));
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
+ VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0))
+ dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid);
+}
+
+static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
+{
+ struct virtnet_info *vi = netdev_priv(dev);
+ struct scatterlist sg;
+
+ sg_set_buf(&sg, &vid, sizeof(vid));
+
+ if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
+ VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0))
+ dev_warn(&dev->dev, "Failed to kill VLAN ID %d.\n", vid);
+}
+
static struct ethtool_ops virtnet_ethtool_ops = {
.set_tx_csum = virtnet_set_tx_csum,
.set_sg = ethtool_op_set_sg,
@@ -753,6 +777,8 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_set_mac_address = eth_mac_addr,
.ndo_set_rx_mode = virtnet_set_rx_mode,
.ndo_change_mtu = virtnet_change_mtu,
+ .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = virtnet_netpoll,
#endif
@@ -877,6 +903,9 @@ static int virtnet_probe(struct virtio_device *vdev)
err = PTR_ERR(vi->svq);
goto free_send;
}
+
+ if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VLAN))
+ dev->features |= NETIF_F_HW_VLAN_FILTER;
}
/* Initialize our empty receive and send queues. */
@@ -967,7 +996,7 @@ static unsigned int features[] = {
VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6,
VIRTIO_NET_F_GUEST_ECN, /* We don't yet handle UFO input. */
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
- VIRTIO_NET_F_CTRL_RX,
+ VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
VIRTIO_F_NOTIFY_ON_EMPTY,
};
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index ba82b65..242348b 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -25,6 +25,7 @@
#define VIRTIO_NET_F_STATUS 16 /* virtio_net_config.status available */
#define VIRTIO_NET_F_CTRL_VQ 17 /* Control channel available */
#define VIRTIO_NET_F_CTRL_RX 18 /* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN 19 /* Control channel VLAN filtering */
#define VIRTIO_NET_S_LINK_UP 1 /* Link is up */
@@ -111,4 +112,17 @@ struct virtio_net_ctrl_mac {
#define VIRTIO_NET_CTRL_MAC 1
#define VIRTIO_NET_CTRL_MAC_TABLE_SET 0
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor. Del is the
+ * opposite of add. Both commands expect an out entry containing a 2
+ * byte VLAN ID. VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN 2
+ #define VIRTIO_NET_CTRL_VLAN_ADD 0
+ #define VIRTIO_NET_CTRL_VLAN_DEL 1
+
#endif /* _LINUX_VIRTIO_NET_H */
next prev parent reply other threads:[~2009-02-04 19:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-03 19:25 [PATCH v4 0/4] virtio_net: Add MAC and VLAN filtering Alex Williamson
2009-02-03 19:25 ` [PATCH v4 1/4] virtio_net: Add a virtqueue for outbound control commands Alex Williamson
2009-02-03 19:26 ` [PATCH v4 2/4] virtio_net: Add a set_rx_mode interface Alex Williamson
2009-02-03 19:26 ` [PATCH v4 3/4] virtio_net: Add a MAC filter table Alex Williamson
2009-02-03 19:26 ` [PATCH v4 4/4] virtio_net: Add support for VLAN filtering in the hypervisor Alex Williamson
2009-02-03 23:06 ` [PATCH v4 0/4] virtio_net: Add MAC and VLAN filtering David Miller
2009-02-03 23:42 ` Alex Williamson
2009-02-04 4:03 ` Rusty Russell
2009-02-04 19:02 ` [PATCH v5 " Alex Williamson
2009-02-04 19:02 ` [PATCH v5 1/4] virtio_net: Add a virtqueue for outbound control commands Alex Williamson
2009-02-04 19:02 ` [PATCH v5 2/4] virtio_net: Add a set_rx_mode interface Alex Williamson
2009-02-04 19:02 ` [PATCH v5 3/4] virtio_net: Add a MAC filter table Alex Williamson
2009-02-04 19:02 ` Alex Williamson [this message]
2009-02-05 0:35 ` [PATCH v5 0/4] virtio_net: Add MAC and VLAN filtering David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090204190250.2512.65526.stgit@debian.lart \
--to=alex.williamson@hp.com \
--cc=davem@davemloft.net \
--cc=kvm@vger.kernel.org \
--cc=markmc@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox