From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Daniel P. Berrange" <berrange@redhat.com>
Subject: Re: how to convert manual vm to libvirtd management
Date: Thu, 9 Apr 2009 19:14:44 +0100
Message-ID: <20090409181444.GB32537@redhat.com>
References: <49DE2A0A.2060209@cnaf.infn.it>
Reply-To: "Daniel P. Berrange" <berrange@redhat.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Cc: kvm@vger.kernel.org
To: Riccardo Veraldi <Riccardo.Veraldi@cnaf.infn.it>
Return-path: <kvm-owner@vger.kernel.org>
Received: from mx1.redhat.com ([66.187.233.31]:41201 "EHLO mx1.redhat.com"
	rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
	id S1761522AbZDISPG (ORCPT <rfc822;kvm@vger.kernel.org>);
	Thu, 9 Apr 2009 14:15:06 -0400
Content-Disposition: inline
In-Reply-To: <49DE2A0A.2060209@cnaf.infn.it>
Sender: kvm-owner@vger.kernel.org
List-ID: <kvm.vger.kernel.org>

On Thu, Apr 09, 2009 at 07:02:02PM +0200, Riccardo Veraldi wrote:
> Hello,
> I have always created my VM under kvm manually starting them from a .sh 
> script:
> 
> for example machine called  abbone
> 
> 
> # abbone.sh
> screen qemu-kvm -nographic -hda ./abbone.img -m 512 -net 
> nic,model=e1000,macaddr=00:16:3e:05:00:07 -net tap -name abbone -vnc :0
> 
> 
> I use screen so that I am hook to the serial console and it is so easy 
> to manager machien via serial console.
> 
> But now I havea problem. I vould like to use virsh to manager my virtual 
> machines.
> 
> now I installed all my VM MANUALLY vithout using virt-install so I do 
> not have the proper virtual machine
> XML descriptor files in /etc/libvirt/qemu
> 
> without a XML description is not possible to start, shutdown, destroy 
> virtual machines via virsh or virt-manager tool.
> 
> so How can I create an XML file with all the options of the above command ?

There is a referenece for possible XML options here:

  http://libvirt.org/formatdomain.html

And some specific XML examples for QEMU:

  http://libvirt.org/drvqemu.html

> 
> actually with the above command a proper tapN interface is created upon 
> VM startup via /etc/qemu-ifup script

When using libvirt, there's no need for a ifup script, since libvirt
will create the TAP device and add it to the bridge for you.

There is a introduction to networking with libvirt here:

http://wiki.libvirt.org/page/Networking

To help you get started, to replicate your example config here:

 qemu-kvm -nographic -hda ./abbone.img -m 512 -net
  nic,model=e1000,macaddr=00:16:3e:05:00:07 -net tap -name abbone -vnc :0

You would want to create an XML doc that looks like this:

   <domain type='kvm'>
     <name>abbone</name>
     <memory>524288</memory>
     <devices>
        <emulator>/usr/bin/qemu-kvm</emulator>
        <disk type='file' device='disk'>
           <source file='/path/to/abbone.img'/>
           <target dev='hda' bus='ide'/>
        </disk>
        <interface type='bridge'>
           <source bridge='br0'/>
           <mac address='00:16:3e:05:00:07'/>
           <model type='e1000'/>
        </interface>
     </devices>
  </domain>


DOn't forget to change 'br0' to whatever bridge you are using, and
set the correct path to your abbone.img disk image

One thing that's confusing is that you have set '-nographic' and '-vnc'
which doesn't make sense. Either you want graphics or you dont !

If you want VNC graphics, then in the <devices> section of the XML
also add

    <graphics type='vnc' port='5900'/>

Then load the config into libvirt using

      virsh define /path/to/config.xml

And you can start it with

      virsh start


If you have more libvirt questions, you might wish to ask on the libvirt
mailing list

  http://www.redhat.com/mailman/listinfo/libvir-list

Regards,
Daniel
-- 
|: Red Hat, Engineering, London   -o-   http://people.redhat.com/berrange/ :|
|: http://libvirt.org  -o-  http://virt-manager.org  -o-  http://ovirt.org :|
|: http://autobuild.org       -o-         http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505  -o-  F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|