From: "Michael S. Tsirkin" <mst@redhat.com>
To: kvm@vger.kernel.org
Subject: [PATCH 17/20] qemu-kvm: add vhost.h header
Date: Thu, 4 Feb 2010 17:29:00 +0200 [thread overview]
Message-ID: <20100204152900.GR8461@redhat.com> (raw)
In-Reply-To: <cover.1265297173.git.mst@redhat.com>
This makes it possible to build vhost support
on systems which do not have this header.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
kvm/include/linux/vhost.h | 130 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 130 insertions(+), 0 deletions(-)
create mode 100644 kvm/include/linux/vhost.h
diff --git a/kvm/include/linux/vhost.h b/kvm/include/linux/vhost.h
new file mode 100644
index 0000000..165a484
--- /dev/null
+++ b/kvm/include/linux/vhost.h
@@ -0,0 +1,130 @@
+#ifndef _LINUX_VHOST_H
+#define _LINUX_VHOST_H
+/* Userspace interface for in-kernel virtio accelerators. */
+
+/* vhost is used to reduce the number of system calls involved in virtio.
+ *
+ * Existing virtio net code is used in the guest without modification.
+ *
+ * This header includes interface used by userspace hypervisor for
+ * device configuration.
+ */
+
+#include <linux/types.h>
+
+#include <linux/ioctl.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ring.h>
+
+struct vhost_vring_state {
+ unsigned int index;
+ unsigned int num;
+};
+
+struct vhost_vring_file {
+ unsigned int index;
+ int fd; /* Pass -1 to unbind from file. */
+
+};
+
+struct vhost_vring_addr {
+ unsigned int index;
+ /* Option flags. */
+ unsigned int flags;
+ /* Flag values: */
+ /* Whether log address is valid. If set enables logging. */
+#define VHOST_VRING_F_LOG 0
+
+ /* Start of array of descriptors (virtually contiguous) */
+ __u64 desc_user_addr;
+ /* Used structure address. Must be 32 bit aligned */
+ __u64 used_user_addr;
+ /* Available structure address. Must be 16 bit aligned */
+ __u64 avail_user_addr;
+ /* Logging support. */
+ /* Log writes to used structure, at offset calculated from specified
+ * address. Address must be 32 bit aligned. */
+ __u64 log_guest_addr;
+};
+
+struct vhost_memory_region {
+ __u64 guest_phys_addr;
+ __u64 memory_size; /* bytes */
+ __u64 userspace_addr;
+ __u64 flags_padding; /* No flags are currently specified. */
+};
+
+/* All region addresses and sizes must be 4K aligned. */
+#define VHOST_PAGE_SIZE 0x1000
+
+struct vhost_memory {
+ __u32 nregions;
+ __u32 padding;
+ struct vhost_memory_region regions[0];
+};
+
+/* ioctls */
+
+#define VHOST_VIRTIO 0xAF
+
+/* Features bitmask for forward compatibility. Transport bits are used for
+ * vhost specific features. */
+#define VHOST_GET_FEATURES _IOR(VHOST_VIRTIO, 0x00, __u64)
+#define VHOST_SET_FEATURES _IOW(VHOST_VIRTIO, 0x00, __u64)
+
+/* Set current process as the (exclusive) owner of this file descriptor. This
+ * must be called before any other vhost command. Further calls to
+ * VHOST_OWNER_SET fail until VHOST_OWNER_RESET is called. */
+#define VHOST_SET_OWNER _IO(VHOST_VIRTIO, 0x01)
+/* Give up ownership, and reset the device to default values.
+ * Allows subsequent call to VHOST_OWNER_SET to succeed. */
+#define VHOST_RESET_OWNER _IO(VHOST_VIRTIO, 0x02)
+
+/* Set up/modify memory layout */
+#define VHOST_SET_MEM_TABLE _IOW(VHOST_VIRTIO, 0x03, struct vhost_memory)
+
+/* Write logging setup. */
+/* Memory writes can optionally be logged by setting bit at an offset
+ * (calculated from the physical address) from specified log base.
+ * The bit is set using an atomic 32 bit operation. */
+/* Set base address for logging. */
+#define VHOST_SET_LOG_BASE _IOW(VHOST_VIRTIO, 0x04, __u64)
+/* Specify an eventfd file descriptor to signal on log write. */
+#define VHOST_SET_LOG_FD _IOW(VHOST_VIRTIO, 0x07, int)
+
+/* Ring setup. */
+/* Set number of descriptors in ring. This parameter can not
+ * be modified while ring is running (bound to a device). */
+#define VHOST_SET_VRING_NUM _IOW(VHOST_VIRTIO, 0x10, struct vhost_vring_state)
+/* Set addresses for the ring. */
+#define VHOST_SET_VRING_ADDR _IOW(VHOST_VIRTIO, 0x11, struct vhost_vring_addr)
+/* Base value where queue looks for available descriptors */
+#define VHOST_SET_VRING_BASE _IOW(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+/* Get accessor: reads index, writes value in num */
+#define VHOST_GET_VRING_BASE _IOWR(VHOST_VIRTIO, 0x12, struct vhost_vring_state)
+
+/* The following ioctls use eventfd file descriptors to signal and poll
+ * for events. */
+
+/* Set eventfd to poll for added buffers */
+#define VHOST_SET_VRING_KICK _IOW(VHOST_VIRTIO, 0x20, struct vhost_vring_file)
+/* Set eventfd to signal when buffers have beed used */
+#define VHOST_SET_VRING_CALL _IOW(VHOST_VIRTIO, 0x21, struct vhost_vring_file)
+/* Set eventfd to signal an error */
+#define VHOST_SET_VRING_ERR _IOW(VHOST_VIRTIO, 0x22, struct vhost_vring_file)
+
+/* VHOST_NET specific defines */
+
+/* Attach virtio net ring to a raw socket, or tap device.
+ * The socket must be already bound to an ethernet device, this device will be
+ * used for transmit. Pass fd -1 to unbind from the socket and the transmit
+ * device. This can be used to stop the ring (e.g. for migration). */
+#define VHOST_NET_SET_BACKEND _IOW(VHOST_VIRTIO, 0x30, struct vhost_vring_file)
+
+/* Feature bits */
+/* Log all write descriptors. Can be changed while device is active. */
+#define VHOST_F_LOG_ALL 26
+/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
+#define VHOST_NET_F_VIRTIO_NET_HDR 27
+
+#endif
--
1.6.6.144.g5c3af
next prev parent reply other threads:[~2010-02-04 15:32 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1265297173.git.mst@redhat.com>
2010-02-04 15:27 ` [PATCH 01/20] exec: memory notifiers Michael S. Tsirkin
2010-02-04 15:27 ` [PATCH 02/20] kvm: move kvm_set_phys_mem around Michael S. Tsirkin
2010-02-04 15:27 ` [PATCH 03/20] kvm: move kvm to use memory notifiers Michael S. Tsirkin
2010-02-04 15:27 ` [PATCH 04/20] qemu-kvm: fixup after merging " Michael S. Tsirkin
2010-02-04 15:27 ` [PATCH 05/20] kvm: add API to set ioeventfd Michael S. Tsirkin
2010-02-04 15:27 ` [PATCH 06/20] notifier: event notifier implementation Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 07/20] virtio: add notifier support Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 08/20] virtio: add APIs for queue fields Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 09/20] virtio: add status change callback Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 10/20] virtio: move typedef to qemu-common Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 11/20] virtio-pci: fill in notifier support Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 12/20] tap: add interface to get device fd Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 13/20] vhost: vhost net support Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 14/20] tap: add vhost/vhostfd options Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 15/20] tap: add API to retrieve vhost net header Michael S. Tsirkin
2010-02-04 15:28 ` [PATCH 16/20] virtio-net: vhost net support Michael S. Tsirkin
2010-02-04 15:29 ` Michael S. Tsirkin [this message]
2010-02-04 15:29 ` [PATCH 18/20] kvm: irqfd support Michael S. Tsirkin
2010-02-04 15:29 ` [PATCH 19/20] msix: add mask/unmask notifiers Michael S. Tsirkin
2010-02-04 15:29 ` [PATCH 20/20] virtio-pci: irqfd support Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100204152900.GR8461@redhat.com \
--to=mst@redhat.com \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox