* WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() @ 2010-08-17 18:09 Tharindu Rukshan Bamunuarachchi 2010-08-23 21:21 ` Marcelo Tosatti 0 siblings, 1 reply; 6+ messages in thread From: Tharindu Rukshan Bamunuarachchi @ 2010-08-17 18:09 UTC (permalink / raw) To: x86; +Cc: kvm [-- Attachment #1: Type: text/plain, Size: 2328 bytes --] hi, I got following message after booting 2.6.35 on KVM. Should I report this to QEMU user list ? Any clue on debugging ? However VM works fine even with message. cheers tharindu [ 0.184000] Setting APIC routing to flat [ 0.188000] ------------[ cut here ]------------ [ 0.192000] WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() [ 0.196000] Hardware name: Bochs [ 0.200000] Pid: 1, comm: swapper Not tainted 2.6.35-tinux+ #85 [ 0.204000] Call Trace: [ 0.204000] [<ffffffff8103e0b5>] warn_slowpath_common+0x75/0xb0 [ 0.208000] [<ffffffff8103e1b5>] warn_slowpath_null+0x15/0x20 [ 0.212000] [<ffffffff816b8f84>] setup_local_APIC+0x169/0x24b [ 0.216000] [<ffffffff81696f59>] native_smp_prepare_cpus+0x322/0x3ff [ 0.220000] [<ffffffff81691ce5>] kernel_init+0x57/0x1bd [ 0.220000] [<ffffffff81003b84>] kernel_thread_helper+0x4/0x10 [ 0.224000] [<ffffffff81691c8e>] ? kernel_init+0x0/0x1bd [ 0.228000] [<ffffffff81003b80>] ? kernel_thread_helper+0x0/0x10 [ 0.232000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.240000] alloc irq_desc for 33 on node 0 [ 0.240000] alloc kstat_irqs on node 0 [ 0.240000] alloc irq_desc for 35 on node 0 [ 0.240000] alloc kstat_irqs on node 0 [ 0.240000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.280000] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03 [ 0.400000] NMI watchdog failed to create perf event on cpu0: ffffffffffffffed [ 0.412000] Booting Node 0, Processors #1 Ok. [ 0.052000] ------------[ cut here ]------------ [ 0.052000] WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() [ 0.052000] Hardware name: Bochs [ 0.052000] Pid: 0, comm: kworker/0:0 Tainted: G W 2.6.35-tinux+ #85 [ 0.052000] Call Trace: [ 0.052000] [<ffffffff8103e0b5>] warn_slowpath_common+0x75/0xb0 [ 0.052000] [<ffffffff8103e1b5>] warn_slowpath_null+0x15/0x20 [ 0.052000] [<ffffffff816b8f84>] setup_local_APIC+0x169/0x24b [ 0.052000] [<ffffffff816b8621>] start_secondary+0x113/0x257 [ 0.052000] ---[ end trace 4eaa2a86a8e2da23 ]--- [ 0.528000] NMI watchdog failed to create perf event on cpu1: ffffffffffffffed [ 0.536000] Brought up 2 CPUs [ 0.540000] Total of 2 processors activated (2490.36 BogoMIPS). [-- Attachment #2: working-35 --] [-- Type: application/octet-stream, Size: 34372 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.35 # Tue Aug 17 17:51:10 2010 # CONFIG_64BIT=y # CONFIG_X86_32 is not set CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_HAVE_EARLY_RES=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_X86_TRAMPOLINE=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" # CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="-tinux" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_WATCH=y CONFIG_AUDIT_TREE=y # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set # CONFIG_CGROUP_NS is not set # CONFIG_CGROUP_FREEZER is not set # CONFIG_CGROUP_DEVICE is not set # CONFIG_CPUSETS is not set # CONFIG_CGROUP_CPUACCT is not set # CONFIG_RESOURCE_COUNTERS is not set # CONFIG_CGROUP_SCHED is not set # CONFIG_BLK_CGROUP is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set CONFIG_RELAY=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y CONFIG_PERF_COUNTERS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_OPROFILE=y # CONFIG_OPROFILE_EVENT_MULTIPLEX is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_FREEZER is not set # # Processor type and features # # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_SPARSE_IRQ=y CONFIG_NUMA_IRQ_DESC=y CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y CONFIG_X86_VSMP=y CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_PARAVIRT_GUEST is not set CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_DEBUG is not set # CONFIG_NO_BOOTMEM is not set # CONFIG_MEMTEST is not set # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=12 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_XADD=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y # CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y # CONFIG_CALGARY_IOMMU is not set CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_IOMMU_API is not set # CONFIG_MAXSMP is not set CONFIG_NR_CPUS=4 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y # CONFIG_X86_MCE is not set # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y CONFIG_NUMA=y CONFIG_K8_NUMA=y CONFIG_NUMA_EMU=y CONFIG_NODES_SHIFT=9 CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_COMPACTION is not set # CONFIG_MIGRATION is not set CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set # CONFIG_X86_RESERVE_LOW_64K is not set # CONFIG_MTRR is not set CONFIG_SECCOMP=y # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_PHYSICAL_START=0x200000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 # CONFIG_HOTPLUG_CPU is not set CONFIG_COMPAT_VDSO=y # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_USE_PERCPU_NUMA_NODE_ID=y # # Power management and ACPI options # # CONFIG_PM is not set # CONFIG_SFI is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # CONFIG_CPU_IDLE is not set # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set CONFIG_PCI_STUB=y CONFIG_HT_IRQ=y CONFIG_PCI_IOV=y CONFIG_ISA_DMA_API=y CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y CONFIG_IA32_EMULATION=y CONFIG_IA32_AOUT=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_NET=y # # Networking options # # CONFIG_PACKET is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set CONFIG_RPS=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # # DRBD disabled because PROC_FS, INET or CONNECTOR not selected # # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y # CONFIG_SATA_PMP is not set # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y # CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set # CONFIG_PATA_SIS is not set # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_LEGACY is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # # # You can enable one or both FireWire driver stacks. # # # The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_ETHOC is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_KSZ884X_PCI is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_KS8842 is not set # CONFIG_KS8851_MLL is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set # CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # CONFIG_WAN is not set # # CAIF transport drivers # # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_FF_MEMLESS=y CONFIG_INPUT_POLLDEV=y CONFIG_INPUT_SPARSEKMAP=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_DEVKMEM=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_N_GSM is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_STALDRV is not set # CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=8 # CONFIG_SERIAL_8250_EXTENDED is not set # # Non-8250 serial port support # # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=0 CONFIG_IPMI_HANDLER=y CONFIG_IPMI_PANIC_EVENT=y # CONFIG_IPMI_PANIC_STRING is not set CONFIG_IPMI_DEVICE_INTERFACE=y CONFIG_IPMI_SI=y CONFIG_IPMI_WATCHDOG=y CONFIG_IPMI_POWEROFF=y CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_NVRAM=y # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # CONFIG_TCG_TPM is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y # CONFIG_RAMOOPS is not set # CONFIG_I2C is not set # CONFIG_SPI is not set # # PPS support # # CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # CONFIG_MFD_SUPPORT is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_AGP is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_DRV_TEST=y # # SPI RTC drivers # # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y CONFIG_RTC_DRV_DS1286=y CONFIG_RTC_DRV_DS1511=y CONFIG_RTC_DRV_DS1553=y CONFIG_RTC_DRV_DS1742=y CONFIG_RTC_DRV_STK17TA8=y CONFIG_RTC_DRV_M48T86=y CONFIG_RTC_DRV_M48T35=y CONFIG_RTC_DRV_M48T59=y CONFIG_RTC_DRV_MSM6242=y CONFIG_RTC_DRV_BQ4802=y CONFIG_RTC_DRV_RP5C01=y CONFIG_RTC_DRV_V3020=y # # on-CPU RTC drivers # CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # # CONFIG_INTEL_MID_DMAC is not set CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y CONFIG_INTEL_IOATDMA=y # CONFIG_TIMB_DMA is not set # CONFIG_PCH_DMA is not set CONFIG_DMA_ENGINE=y # # DMA Clients # CONFIG_NET_DMA=y CONFIG_ASYNC_TX_DMA=y CONFIG_DMATEST=y CONFIG_DCA=y # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set CONFIG_X86_PLATFORM_DEVICES=y # # Firmware Drivers # CONFIG_EDD=y # CONFIG_EDD_OFF is not set # CONFIG_FIRMWARE_MEMMAP is not set # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set # CONFIG_DMIID is not set # CONFIG_ISCSI_IBFT_FIND is not set # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT2_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4_FS is not set CONFIG_FS_XIP=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set CONFIG_GENERIC_ACL=y # # Caches # CONFIG_FSCACHE=y CONFIG_FSCACHE_STATS=y # CONFIG_FSCACHE_HISTOGRAM is not set # CONFIG_FSCACHE_DEBUG is not set CONFIG_FSCACHE_OBJECT_LIST=y CONFIG_CACHEFILES=y # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # # CONFIG_MSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_TRFS=y # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y # CONFIG_AMIGA_PARTITION is not set CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y # CONFIG_MINIX_SUBPARTITION is not set CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_SYSV68_PARTITION=y # CONFIG_NLS is not set # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=2048 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_LOCKUP_DETECTOR=y CONFIG_HARDLOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set # CONFIG_DEBUG_OBJECTS_FREE is not set # CONFIG_DEBUG_OBJECTS_TIMERS is not set # CONFIG_DEBUG_OBJECTS_WORK is not set # CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set CONFIG_DEBUG_VM=y # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_RING_BUFFER=y CONFIG_RING_BUFFER_ALLOW_SWAP=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set CONFIG_DYNAMIC_DEBUG=y # CONFIG_DMA_API_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_KMEMCHECK is not set # CONFIG_STRICT_DEVMEM is not set CONFIG_X86_VERBOSE_BOOTUP=y CONFIG_EARLY_PRINTK=y # CONFIG_EARLY_PRINTK_DBGP is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_X86_PTDUMP=y CONFIG_DEBUG_RODATA=y CONFIG_DEBUG_RODATA_TEST=y # CONFIG_IOMMU_DEBUG is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 CONFIG_DEBUG_BOOT_PARAMS=y # CONFIG_CPA_DEBUG is not set CONFIG_OPTIMIZE_INLINING=y # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_MANAGER_TESTS is not set CONFIG_CRYPTO_GF128MUL=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set CONFIG_CRYPTO_SEQIV=y # # Block modes # # CONFIG_CRYPTO_CBC is not set CONFIG_CRYPTO_CTR=y # CONFIG_CRYPTO_CTS is not set # CONFIG_CRYPTO_ECB is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32C_INTEL is not set CONFIG_CRYPTO_GHASH=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set # # Ciphers # # CONFIG_CRYPTO_AES is not set # CONFIG_CRYPTO_AES_X86_64 is not set # CONFIG_CRYPTO_AES_NI_INTEL is not set # CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # # Compression # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_ZLIB=y CONFIG_CRYPTO_LZO=y # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_HAVE_KVM=y # CONFIG_VIRTUALIZATION is not set # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() 2010-08-17 18:09 WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() Tharindu Rukshan Bamunuarachchi @ 2010-08-23 21:21 ` Marcelo Tosatti 2010-08-24 3:14 ` Tharindu Rukshan Bamunuarachchi 0 siblings, 1 reply; 6+ messages in thread From: Marcelo Tosatti @ 2010-08-23 21:21 UTC (permalink / raw) To: Tharindu Rukshan Bamunuarachchi; +Cc: x86, kvm On Tue, Aug 17, 2010 at 07:09:36PM +0100, Tharindu Rukshan Bamunuarachchi wrote: > hi, > > I got following message after booting 2.6.35 on KVM. > Should I report this to QEMU user list ? Any clue on debugging ? > > However VM works fine even with message. > > cheers > tharindu Please provide host hardware information (/proc/cpuinfo), full qemu command line and full dmesg of guest. > > > [ 0.184000] Setting APIC routing to flat > [ 0.188000] ------------[ cut here ]------------ > [ 0.192000] WARNING: at arch/x86/kernel/apic/apic.c:1238 > setup_local_APIC+0x169/0x24b() > [ 0.196000] Hardware name: Bochs > [ 0.200000] Pid: 1, comm: swapper Not tainted 2.6.35-tinux+ #85 > [ 0.204000] Call Trace: > [ 0.204000] [<ffffffff8103e0b5>] warn_slowpath_common+0x75/0xb0 > [ 0.208000] [<ffffffff8103e1b5>] warn_slowpath_null+0x15/0x20 > [ 0.212000] [<ffffffff816b8f84>] setup_local_APIC+0x169/0x24b > [ 0.216000] [<ffffffff81696f59>] native_smp_prepare_cpus+0x322/0x3ff > [ 0.220000] [<ffffffff81691ce5>] kernel_init+0x57/0x1bd > [ 0.220000] [<ffffffff81003b84>] kernel_thread_helper+0x4/0x10 > [ 0.224000] [<ffffffff81691c8e>] ? kernel_init+0x0/0x1bd > [ 0.228000] [<ffffffff81003b80>] ? kernel_thread_helper+0x0/0x10 > [ 0.232000] ---[ end trace 4eaa2a86a8e2da22 ]--- > [ 0.240000] alloc irq_desc for 33 on node 0 > [ 0.240000] alloc kstat_irqs on node 0 > [ 0.240000] alloc irq_desc for 35 on node 0 > [ 0.240000] alloc kstat_irqs on node 0 > [ 0.240000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.280000] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03 > [ 0.400000] NMI watchdog failed to create perf event on cpu0: > ffffffffffffffed > [ 0.412000] Booting Node 0, Processors #1 Ok. > [ 0.052000] ------------[ cut here ]------------ > [ 0.052000] WARNING: at arch/x86/kernel/apic/apic.c:1238 > setup_local_APIC+0x169/0x24b() > [ 0.052000] Hardware name: Bochs > [ 0.052000] Pid: 0, comm: kworker/0:0 Tainted: G W 2.6.35-tinux+ #85 > [ 0.052000] Call Trace: > [ 0.052000] [<ffffffff8103e0b5>] warn_slowpath_common+0x75/0xb0 > [ 0.052000] [<ffffffff8103e1b5>] warn_slowpath_null+0x15/0x20 > [ 0.052000] [<ffffffff816b8f84>] setup_local_APIC+0x169/0x24b > [ 0.052000] [<ffffffff816b8621>] start_secondary+0x113/0x257 > [ 0.052000] ---[ end trace 4eaa2a86a8e2da23 ]--- > [ 0.528000] NMI watchdog failed to create perf event on cpu1: > ffffffffffffffed > [ 0.536000] Brought up 2 CPUs > [ 0.540000] Total of 2 processors activated (2490.36 BogoMIPS). ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() 2010-08-23 21:21 ` Marcelo Tosatti @ 2010-08-24 3:14 ` Tharindu Rukshan Bamunuarachchi 2010-08-24 13:22 ` Marcelo Tosatti 0 siblings, 1 reply; 6+ messages in thread From: Tharindu Rukshan Bamunuarachchi @ 2010-08-24 3:14 UTC (permalink / raw) To: Marcelo Tosatti; +Cc: x86, kvm cat /proc/cpuinfo ============ tharindu@tintin:~> cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping : 6 cpu MHz : 1000.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow bogomips : 3989.94 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping : 6 cpu MHz : 1000.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm tpr_shadow bogomips : 3989.96 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: QEMU/KVM Command Line ===================== kvm -curses -smp 2 -net nic,model=i82551 -net tap,ifname=qtap0,script=no -kernel linux/arch/x86/boot/bzImage -append "root=/dev/sda1" -hda /home/tharindu/virtual/tinux/tinux.img -hdb /home/tharindu/virtual/tinux/test.img -m 400 Full DMESG ========== [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.36-rc1-tinux+ (tharindu@tintin) (gcc version 4.5.0 20100604 [gcc-4_5-branch revision 160292] (SUSE Linux) ) #89 SMP PREEMPT Mon Aug 23 15:56:06 BST 2010 [ 0.000000] Command line: root=/dev/sda1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable) [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000018ffd000 (usable) [ 0.000000] BIOS-e820: 0000000018ffd000 - 0000000019000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.4 present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x18ffd max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000f85b0] f85b0 [ 0.000000] init_memory_mapping: 0000000000000000-0000000018ffd000 [ 0.000000] 0000000000 - 0018e00000 page 2M [ 0.000000] 0018e00000 - 0018ffd000 page 4k [ 0.000000] kernel direct mapping tables up to 18ffd000 @ 8000-b000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000018ffd000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000018ffd000 [ 0.000000] NODE_DATA [0000000001870080 - 000000000188f07f] [ 0.000000] bootmap [0000000001890000 - 00000000018931ff] pages 4 [ 0.000000] (10/32 early reservations) ==> bootmem [0000000000 - 0018ffd000] [ 0.000000] #0 [0001000000 - 000186f960] TEXT DATA BSS ==> [0001000000 - 000186f960] [ 0.000000] #1 [0001870000 - 0001870049] BRK ==> [0001870000 - 0001870049] [ 0.000000] #2 [000009f400 - 00000f85b0] BIOS reserved ==> [000009f400 - 00000f85b0] [ 0.000000] #3 [00000f85b0 - 00000f85c0] MP-table mpf ==> [00000f85b0 - 00000f85c0] [ 0.000000] #4 [00000f86b4 - 0000100000] BIOS reserved ==> [00000f86b4 - 0000100000] [ 0.000000] #5 [00000f85c0 - 00000f86b4] MP-table mpc ==> [00000f85c0 - 00000f86b4] [ 0.000000] #6 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000] [ 0.000000] #7 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] #8 [0001870080 - 000188f080] NODE_DATA ==> [0001870080 - 000188f080] [ 0.000000] #9 [0001890000 - 0001894000] BOOTMAP ==> [0001890000 - 0001894000] [ 0.000000] [ffffea0000000000-ffffea00007fffff] PMD -> [ffff880002200000-ffff8800029fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00018ffd [ 0.000000] On node 0 totalpages: 102299 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 99 pages reserved [ 0.000000] DMA zone: 3843 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1344 pages used for memmap [ 0.000000] DMA32 zone: 96957 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: BOCHSCPU [ 0.000000] MPTABLE: Product ID: 0.1 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] Allocating PCI resources starting at 19000000 (gap: 19000000:e6fbc000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff880001a00000 s76224 r0 d22080 u1048576 [ 0.000000] pcpu-alloc: s76224 r0 d22080 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 100800 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/sda1 [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 391960k/409588k available (3001k kernel code, 392k absent, 17236k reserved, 3633k data, 1116k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: No reference (HPET/PMTIMER) available [ 0.000000] Marking TSC unstable due to could not calculate TSC khz [ 0.052000] Calibrating delay loop... 3932.16 BogoMIPS (lpj=7864320) [ 0.148000] pid_max: default: 32768 minimum: 301 [ 0.148000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.152000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.152000] Mount-cache hash table entries: 256 [ 0.152000] Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only. [ 0.160000] Freeing SMP alternatives: 12k freed [ 0.160000] Setting APIC routing to flat [ 0.164000] ------------[ cut here ]------------ [ 0.164000] WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() [ 0.164000] Hardware name: Bochs [ 0.168000] Pid: 1, comm: swapper Not tainted 2.6.36-rc1-tinux+ #89 [ 0.168000] Call Trace: [ 0.168000] [<ffffffff8103e0a5>] warn_slowpath_common+0x75/0xb0 [ 0.168000] [<ffffffff8103e1a5>] warn_slowpath_null+0x15/0x20 [ 0.172000] [<ffffffff816b708a>] setup_local_APIC+0x169/0x24b [ 0.172000] [<ffffffff81694f6f>] native_smp_prepare_cpus+0x322/0x3ff [ 0.172000] [<ffffffff8168fce5>] kernel_init+0x57/0x1bd [ 0.172000] [<ffffffff81003b84>] kernel_thread_helper+0x4/0x10 [ 0.176000] [<ffffffff8168fc8e>] ? kernel_init+0x0/0x1bd [ 0.176000] [<ffffffff81003b80>] ? kernel_thread_helper+0x0/0x10 [ 0.176000] ---[ end trace 4eaa2a86a8e2da22 ]--- [ 0.180000] alloc irq_desc for 33 on node 0 [ 0.180000] alloc kstat_irqs on node 0 [ 0.180000] alloc irq_desc for 35 on node 0 [ 0.180000] alloc kstat_irqs on node 0 [ 0.180000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.220000] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03 [ 0.340000] NMI watchdog failed to create perf event on cpu0: ffffffffffffffed [ 0.348000] Booting Node 0, Processors #1 Ok. [ 0.052000] ------------[ cut here ]------------ [ 0.052000] WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() [ 0.052000] Hardware name: Bochs [ 0.052000] Pid: 0, comm: kworker/0:0 Tainted: G W 2.6.36-rc1-tinux+ #89 [ 0.052000] Call Trace: [ 0.052000] [<ffffffff8103e0a5>] warn_slowpath_common+0x75/0xb0 [ 0.052000] [<ffffffff8103e1a5>] warn_slowpath_null+0x15/0x20 [ 0.052000] [<ffffffff816b708a>] setup_local_APIC+0x169/0x24b [ 0.052000] [<ffffffff816b6727>] start_secondary+0x113/0x257 [ 0.052000] ---[ end trace 4eaa2a86a8e2da23 ]--- [ 0.456000] NMI watchdog failed to create perf event on cpu1: ffffffffffffffed [ 0.464000] Brought up 2 CPUs [ 0.464000] Total of 2 processors activated (7831.55 BogoMIPS). [ 0.468000] devtmpfs: initialized [ 0.468000] NET: Registered protocol family 16 [ 0.468000] dca service started, version 1.12.1 [ 0.468000] PCI: Using configuration type 1 for base access [ 0.472000] bio: create slab <bio-0> at 0 [ 0.472000] vgaarb: loaded [ 0.476000] SCSI subsystem initialized [ 0.476000] libata version 3.00 loaded. [ 0.476000] PCI: Probing PCI hardware [ 0.476000] PCI: Probing PCI hardware (bus 00) [ 0.476000] pci_bus 0000:00: scanning bus [ 0.476000] pci 0000:00:00.0: found [8086:1237] class 000600 header type 00 [ 0.476000] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.476000] pci 0000:00:00.0: calling quirk_resource_alignment+0x0/0x166 [ 0.476000] pci 0000:00:00.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.476000] pci 0000:00:01.0: found [8086:7000] class 000601 header type 00 [ 0.476000] pci 0000:00:01.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.476000] pci 0000:00:01.0: calling quirk_resource_alignment+0x0/0x166 [ 0.476000] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.476000] pci 0000:00:01.1: found [8086:7010] class 000101 header type 00 [ 0.476000] pci 0000:00:01.1: calling quirk_mmio_always_on+0x0/0x17 [ 0.480000] pci 0000:00:01.1: reg 20: [io 0xc000-0xc00f] [ 0.480000] pci 0000:00:01.1: calling quirk_resource_alignment+0x0/0x166 [ 0.480000] pci 0000:00:01.1: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.480000] pci 0000:00:01.3: found [8086:7113] class 000680 header type 00 [ 0.480000] pci 0000:00:01.3: calling quirk_mmio_always_on+0x0/0x17 [ 0.480000] pci 0000:00:01.3: calling quirk_piix4_acpi+0x0/0x149 [ 0.480000] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI [ 0.480000] pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB [ 0.484000] pci 0000:00:01.3: calling quirk_resource_alignment+0x0/0x166 [ 0.484000] pci 0000:00:01.3: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.484000] pci 0000:00:01.3: calling pci_fixup_piix4_acpi+0x0/0x10 [ 0.484000] pci 0000:00:02.0: found [1013:00b8] class 000300 header type 00 [ 0.484000] pci 0000:00:02.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.488000] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref] [ 0.492000] pci 0000:00:02.0: reg 14: [mem 0xf2000000-0xf2000fff] [ 0.504000] pci 0000:00:02.0: reg 30: [mem 0xf2010000-0xf201ffff pref] [ 0.504000] pci 0000:00:02.0: calling quirk_resource_alignment+0x0/0x166 [ 0.504000] pci 0000:00:03.0: found [8086:1209] class 000200 header type 00 [ 0.504000] pci 0000:00:03.0: calling quirk_mmio_always_on+0x0/0x17 [ 0.504000] pci 0000:00:03.0: reg 10: [mem 0xf2020000-0xf2020fff pref] [ 0.504000] pci 0000:00:03.0: reg 14: [io 0xc040-0xc07f] [ 0.504000] pci 0000:00:03.0: reg 18: [mem 0xf2040000-0xf205ffff] [ 0.508000] pci 0000:00:03.0: calling quirk_resource_alignment+0x0/0x166 [ 0.508000] pci 0000:00:03.0: calling pci_fixup_transparent_bridge+0x0/0x2a [ 0.508000] pci_bus 0000:00: fixups for bus [ 0.508000] pci_bus 0000:00: bus scan returning with max=00 [ 0.508000] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.508000] pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000] [ 0.512000] PCI: pci_cache_line_size set to 64 bytes [ 0.512000] pci 0000:00:01.1: BAR 0: reserving [io 0x01f0-0x01f7 flags 0x110] (d=0, p=0) [ 0.512000] pci 0000:00:01.1: BAR 1: reserving [io 0x03f6 flags 0x110] (d=0, p=0) [ 0.512000] pci 0000:00:01.1: BAR 2: reserving [io 0x0170-0x0177 flags 0x110] (d=0, p=0) [ 0.512000] pci 0000:00:01.1: BAR 3: reserving [io 0x0376 flags 0x110] (d=0, p=0) [ 0.512000] pci 0000:00:01.1: BAR 4: reserving [io 0xc000-0xc00f flags 0x40101] (d=0, p=0) [ 0.512000] pci 0000:00:02.0: BAR 0: reserving [mem 0xf0000000-0xf1ffffff flags 0x42208] (d=0, p=0) [ 0.512000] pci 0000:00:02.0: BAR 1: reserving [mem 0xf2000000-0xf2000fff flags 0x40200] (d=0, p=0) [ 0.512000] pci 0000:00:03.0: BAR 0: reserving [mem 0xf2020000-0xf2020fff flags 0x42208] (d=0, p=0) [ 0.512000] pci 0000:00:03.0: BAR 1: reserving [io 0xc040-0xc07f flags 0x40101] (d=0, p=0) [ 0.512000] pci 0000:00:03.0: BAR 2: reserving [mem 0xf2040000-0xf205ffff flags 0x40200] (d=0, p=0) [ 0.512000] reserve RAM buffer: 000000000009f400 - 000000000009ffff [ 0.512000] reserve RAM buffer: 0000000018ffd000 - 000000001bffffff [ 0.512000] FS-Cache: Loaded [ 0.512000] CacheFiles: Loaded [ 0.516000] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.516000] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.516000] NET: Registered protocol family 2 [ 0.516000] IP route cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.516000] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 0.520000] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.520000] TCP: Hash tables configured (established 16384 bind 16384) [ 0.524000] TCP reno registered [ 0.524000] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.524000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.524000] NET: Registered protocol family 1 [ 0.528000] pci 0000:00:00.0: calling quirk_e100_interrupt+0x0/0x15d [ 0.528000] pci 0000:00:00.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.528000] pci 0000:00:00.0: calling quirk_natoma+0x0/0x2b [ 0.528000] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.528000] pci 0000:00:00.0: calling quirk_passive_release+0x0/0xa0 [ 0.528000] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.528000] pci 0000:00:00.0: calling quirk_usb_early_handoff+0x0/0x4fc [ 0.528000] pci 0000:00:00.0: calling pci_fixup_video+0x0/0xb0 [ 0.528000] pci 0000:00:01.0: calling quirk_e100_interrupt+0x0/0x15d [ 0.528000] pci 0000:00:01.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.528000] pci 0000:00:01.0: calling quirk_isa_dma_hangs+0x0/0x2e [ 0.528000] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.528000] pci 0000:00:01.0: calling quirk_usb_early_handoff+0x0/0x4fc [ 0.528000] pci 0000:00:01.0: calling pci_fixup_video+0x0/0xb0 [ 0.532000] pci 0000:00:01.1: calling quirk_e100_interrupt+0x0/0x15d [ 0.532000] pci 0000:00:01.1: calling quirk_cardbus_legacy+0x0/0x30 [ 0.532000] pci 0000:00:01.1: calling quirk_usb_early_handoff+0x0/0x4fc [ 0.532000] pci 0000:00:01.1: calling pci_fixup_video+0x0/0xb0 [ 0.532000] pci 0000:00:01.3: calling quirk_e100_interrupt+0x0/0x15d [ 0.532000] pci 0000:00:01.3: calling quirk_cardbus_legacy+0x0/0x30 [ 0.532000] pci 0000:00:01.3: calling quirk_usb_early_handoff+0x0/0x4fc [ 0.532000] pci 0000:00:01.3: calling pci_fixup_video+0x0/0xb0 [ 0.532000] pci 0000:00:02.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.532000] pci 0000:00:02.0: calling quirk_usb_early_handoff+0x0/0x4fc [ 0.532000] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xb0 [ 0.532000] pci 0000:00:02.0: Boot video device [ 0.532000] pci 0000:00:03.0: calling quirk_e100_interrupt+0x0/0x15d [ 0.532000] pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling [ 0.532000] pci 0000:00:03.0: calling quirk_cardbus_legacy+0x0/0x30 [ 0.532000] pci 0000:00:03.0: calling quirk_usb_early_handoff+0x0/0x4fc [ 0.532000] pci 0000:00:03.0: calling pci_fixup_video+0x0/0xb0 [ 0.532000] PCI: CLS 0 bytes, default 64 [ 0.540000] DMA-API: preallocated 32768 debug entries [ 0.544000] DMA-API: debugging enabled by kernel config [ 0.544000] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.544000] microcode: CPU0 sig=0x623, pf=0x0, revision=0x0 [ 0.548000] microcode: CPU1 sig=0x623, pf=0x0, revision=0x0 [ 0.548000] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.548000] audit: initializing netlink socket (disabled) [ 0.552000] type=2000 audit(1282619343.552:1): initialized [ 0.552000] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.556000] msgmni has been set to 765 [ 0.556000] io scheduler noop registered [ 0.560000] io scheduler deadline registered [ 0.560000] io scheduler cfq registered (default) [ 0.560000] pci-stub: invalid id string "" [ 0.560000] Non-volatile memory driver v1.3 [ 0.564000] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.572000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.576000] ata_piix 0000:00:01.1: version 2.13 [ 0.576000] ata_piix 0000:00:01.1: setting latency timer to 64 [ 0.580000] scsi0 : ata_piix [ 0.580000] scsi1 : ata_piix [ 0.580000] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14 [ 0.580000] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15 [ 0.584000] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k6-NAPI [ 0.584000] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.584000] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.588000] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.588000] TRB: A4 alloc_etherdev [ 0.588000] e100 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 35 [ 0.588000] e100 0000:00:03.0: enabling bus mastering [ 0.700000] e100 0000:00:03.0: eth0: addr 0xf2020000, irq 35, MAC addr 52:54:00:12:34:56 [ 0.704000] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.704000] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.712000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.712000] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.716000] rtc0: alarms up to one day, 114 bytes nvram [ 0.716000] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 0.716000] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 0.716000] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 0.720000] oprofile: using NMI interrupt. [ 0.720000] TCP cubic registered [ 0.720000] rtc_cmos rtc_cmos: setting system clock to 2010-08-24 03:09:03 UTC (1282619343) [ 0.744000] ata2.01: NODEV after polling detection [ 0.744000] ata1.00: ATA-7: QEMU HARDDISK, 0.12.3, max UDMA/100 [ 0.744000] ata1.00: 2097152 sectors, multi 16: LBA48 [ 0.748000] ata2.00: ATAPI: QEMU DVD-ROM, 0.12.3, max UDMA/100 [ 0.748000] ata2.00: configured for MWDMA2 [ 0.748000] ata1.01: ATA-7: QEMU HARDDISK, 0.12.3, max UDMA/100 [ 0.752000] ata1.01: 1024000 sectors, multi 16: LBA48 [ 0.752000] ata1.00: configured for MWDMA2 [ 0.752000] ata1.01: configured for MWDMA2 [ 0.756000] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.12 PQ: 0 ANSI: 5 [ 0.756000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.760000] scsi 0:0:1:0: Direct-Access ATA QEMU HARDDISK 0.12 PQ: 0 ANSI: 5 [ 0.764000] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 0.764000] sd 0:0:0:0: [sda] 2097152 512-byte logical blocks: (1.07 GB/1.00 GiB) [ 0.764000] sd 0:0:0:0: [sda] Write Protect is off [ 0.764000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.764000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.764000] sda: sda1 [ 0.772000] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.12 PQ: 0 ANSI: 5 [ 0.772000] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.772000] sd 0:0:1:0: [sdb] 1024000 512-byte logical blocks: (524 MB/500 MiB) [ 0.772000] sd 0:0:1:0: [sdb] Write Protect is off [ 0.772000] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 0.772000] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.772000] sdb: unknown partition table [ 0.776000] sd 0:0:1:0: [sdb] Attached SCSI disk [ 0.780000] scsi 1:0:0:0: Attached scsi generic sg2 type 5 [ 0.784000] EXT3-fs (sda1): recovery required on readonly filesystem [ 0.784000] EXT3-fs (sda1): write access will be enabled during recovery [ 0.792000] EXT3-fs: barriers not enabled [ 0.792000] kjournald starting. Commit interval 5 seconds [ 0.792000] EXT3-fs (sda1): recovery complete [ 0.796000] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 0.796000] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 0.800000] devtmpfs: mounted [ 0.800000] Freeing unused kernel memory: 1116k freed [ 0.804000] Write protecting the kernel read-only data: 6144k [ 0.804000] Freeing unused kernel memory: 1076k freed [ 0.808000] Freeing unused kernel memory: 1144k freed [ 1.224000] udevd (90): /proc/90/oom_adj is deprecated, please use /proc/90/oom_score_adj instead. [ 3.092000] EXT3-fs (sda1): using internal journal [ 6.064000] e100 0000:00:03.0: eth0: NIC Link is Up 100 Mbps Full Duplex ./tharindu On Mon, Aug 23, 2010 at 10:21 PM, Marcelo Tosatti <mtosatti@redhat.com> wrote: > > On Tue, Aug 17, 2010 at 07:09:36PM +0100, Tharindu Rukshan Bamunuarachchi wrote: > > hi, > > > > I got following message after booting 2.6.35 on KVM. > > Should I report this to QEMU user list ? Any clue on debugging ? > > > > However VM works fine even with message. > > > > cheers > > tharindu > > Please provide host hardware information (/proc/cpuinfo), full qemu > command line and full dmesg of guest. > > > > > > > [ 0.184000] Setting APIC routing to flat > > [ 0.188000] ------------[ cut here ]------------ > > [ 0.192000] WARNING: at arch/x86/kernel/apic/apic.c:1238 > > setup_local_APIC+0x169/0x24b() > > [ 0.196000] Hardware name: Bochs > > [ 0.200000] Pid: 1, comm: swapper Not tainted 2.6.35-tinux+ #85 > > [ 0.204000] Call Trace: > > [ 0.204000] [<ffffffff8103e0b5>] warn_slowpath_common+0x75/0xb0 > > [ 0.208000] [<ffffffff8103e1b5>] warn_slowpath_null+0x15/0x20 > > [ 0.212000] [<ffffffff816b8f84>] setup_local_APIC+0x169/0x24b > > [ 0.216000] [<ffffffff81696f59>] native_smp_prepare_cpus+0x322/0x3ff > > [ 0.220000] [<ffffffff81691ce5>] kernel_init+0x57/0x1bd > > [ 0.220000] [<ffffffff81003b84>] kernel_thread_helper+0x4/0x10 > > [ 0.224000] [<ffffffff81691c8e>] ? kernel_init+0x0/0x1bd > > [ 0.228000] [<ffffffff81003b80>] ? kernel_thread_helper+0x0/0x10 > > [ 0.232000] ---[ end trace 4eaa2a86a8e2da22 ]--- > > [ 0.240000] alloc irq_desc for 33 on node 0 > > [ 0.240000] alloc kstat_irqs on node 0 > > [ 0.240000] alloc irq_desc for 35 on node 0 > > [ 0.240000] alloc kstat_irqs on node 0 > > [ 0.240000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > > [ 0.280000] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03 > > [ 0.400000] NMI watchdog failed to create perf event on cpu0: > > ffffffffffffffed > > [ 0.412000] Booting Node 0, Processors #1 Ok. > > [ 0.052000] ------------[ cut here ]------------ > > [ 0.052000] WARNING: at arch/x86/kernel/apic/apic.c:1238 > > setup_local_APIC+0x169/0x24b() > > [ 0.052000] Hardware name: Bochs > > [ 0.052000] Pid: 0, comm: kworker/0:0 Tainted: G W 2.6.35-tinux+ #85 > > [ 0.052000] Call Trace: > > [ 0.052000] [<ffffffff8103e0b5>] warn_slowpath_common+0x75/0xb0 > > [ 0.052000] [<ffffffff8103e1b5>] warn_slowpath_null+0x15/0x20 > > [ 0.052000] [<ffffffff816b8f84>] setup_local_APIC+0x169/0x24b > > [ 0.052000] [<ffffffff816b8621>] start_secondary+0x113/0x257 > > [ 0.052000] ---[ end trace 4eaa2a86a8e2da23 ]--- > > [ 0.528000] NMI watchdog failed to create perf event on cpu1: > > ffffffffffffffed > > [ 0.536000] Brought up 2 CPUs > > [ 0.540000] Total of 2 processors activated (2490.36 BogoMIPS). > > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() 2010-08-24 3:14 ` Tharindu Rukshan Bamunuarachchi @ 2010-08-24 13:22 ` Marcelo Tosatti 2010-08-24 15:11 ` Tharindu Rukshan Bamunuarachchi 2010-08-24 15:41 ` Tharindu Rukshan Bamunuarachchi 0 siblings, 2 replies; 6+ messages in thread From: Marcelo Tosatti @ 2010-08-24 13:22 UTC (permalink / raw) To: Tharindu Rukshan Bamunuarachchi; +Cc: x86, kvm > [ 0.000000] NR_IRQS:4352 nr_irqs:512 > [ 0.000000] Console: colour VGA+ 80x25 > [ 0.000000] console [tty0] enabled > [ 0.000000] ODEBUG: 0 of 0 active objects replaced > [ 0.000000] Fast TSC calibration failed > [ 0.000000] TSC: Unable to calibrate against PIT > [ 0.000000] TSC: No reference (HPET/PMTIMER) available > [ 0.000000] Marking TSC unstable due to could not calculate TSC khz > [ 0.052000] Calibrating delay loop... 3932.16 BogoMIPS (lpj=7864320) Enabling CONFIG_KVM_GUEST and CONFIG_KVM_CLOCK should fix the warning. > [ 0.148000] pid_max: default: 32768 minimum: 301 > [ 0.148000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) > [ 0.152000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) > [ 0.152000] Mount-cache hash table entries: 256 > [ 0.152000] Performance Events: unsupported p6 CPU model 2 no PMU > driver, software events only. > [ 0.160000] Freeing SMP alternatives: 12k freed > [ 0.160000] Setting APIC routing to flat > [ 0.164000] ------------[ cut here ]------------ > [ 0.164000] WARNING: at arch/x86/kernel/apic/apic.c:1238 > setup_local_APIC+0x169/0x24b() > [ 0.164000] Hardware name: Bochs > [ 0.168000] Pid: 1, comm: swapper Not tainted 2.6.36-rc1-tinux+ #89 > [ 0.168000] Call Trace: > [ 0.168000] [<ffffffff8103e0a5>] warn_slowpath_common+0x75/0xb0 > [ 0.168000] [<ffffffff8103e1a5>] warn_slowpath_null+0x15/0x20 > [ 0.172000] [<ffffffff816b708a>] setup_local_APIC+0x169/0x24b > [ 0.172000] [<ffffffff81694f6f>] native_smp_prepare_cpus+0x322/0x3ff > [ 0.172000] [<ffffffff8168fce5>] kernel_init+0x57/0x1bd > [ 0.172000] [<ffffffff81003b84>] kernel_thread_helper+0x4/0x10 > [ 0.176000] [<ffffffff8168fc8e>] ? kernel_init+0x0/0x1bd > [ 0.176000] [<ffffffff81003b80>] ? kernel_thread_helper+0x0/0x10 > [ 0.176000] ---[ end trace 4eaa2a86a8e2da22 ]--- > [ 0.180000] alloc irq_desc for 33 on node 0 > [ 0.180000] alloc kstat_irqs on node 0 > [ 0.180000] alloc irq_desc for 35 on node 0 > [ 0.180000] alloc kstat_irqs on node 0 > [ 0.180000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.220000] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03 > [ 0.340000] NMI watchdog failed to create perf event on cpu0: > ffffffffffffffed ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() 2010-08-24 13:22 ` Marcelo Tosatti @ 2010-08-24 15:11 ` Tharindu Rukshan Bamunuarachchi 2010-08-24 15:41 ` Tharindu Rukshan Bamunuarachchi 1 sibling, 0 replies; 6+ messages in thread From: Tharindu Rukshan Bamunuarachchi @ 2010-08-24 15:11 UTC (permalink / raw) To: Marcelo Tosatti; +Cc: x86, kvm it worked. thankx a lot. On Tue, Aug 24, 2010 at 2:22 PM, Marcelo Tosatti <mtosatti@redhat.com> wrote: >> [ 0.000000] NR_IRQS:4352 nr_irqs:512 >> [ 0.000000] Console: colour VGA+ 80x25 >> [ 0.000000] console [tty0] enabled >> [ 0.000000] ODEBUG: 0 of 0 active objects replaced >> [ 0.000000] Fast TSC calibration failed >> [ 0.000000] TSC: Unable to calibrate against PIT >> [ 0.000000] TSC: No reference (HPET/PMTIMER) available >> [ 0.000000] Marking TSC unstable due to could not calculate TSC khz >> [ 0.052000] Calibrating delay loop... 3932.16 BogoMIPS (lpj=7864320) > > Enabling CONFIG_KVM_GUEST and CONFIG_KVM_CLOCK should fix the warning. > >> [ 0.148000] pid_max: default: 32768 minimum: 301 >> [ 0.148000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) >> [ 0.152000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) >> [ 0.152000] Mount-cache hash table entries: 256 >> [ 0.152000] Performance Events: unsupported p6 CPU model 2 no PMU >> driver, software events only. >> [ 0.160000] Freeing SMP alternatives: 12k freed >> [ 0.160000] Setting APIC routing to flat >> [ 0.164000] ------------[ cut here ]------------ >> [ 0.164000] WARNING: at arch/x86/kernel/apic/apic.c:1238 >> setup_local_APIC+0x169/0x24b() >> [ 0.164000] Hardware name: Bochs >> [ 0.168000] Pid: 1, comm: swapper Not tainted 2.6.36-rc1-tinux+ #89 >> [ 0.168000] Call Trace: >> [ 0.168000] [<ffffffff8103e0a5>] warn_slowpath_common+0x75/0xb0 >> [ 0.168000] [<ffffffff8103e1a5>] warn_slowpath_null+0x15/0x20 >> [ 0.172000] [<ffffffff816b708a>] setup_local_APIC+0x169/0x24b >> [ 0.172000] [<ffffffff81694f6f>] native_smp_prepare_cpus+0x322/0x3ff >> [ 0.172000] [<ffffffff8168fce5>] kernel_init+0x57/0x1bd >> [ 0.172000] [<ffffffff81003b84>] kernel_thread_helper+0x4/0x10 >> [ 0.176000] [<ffffffff8168fc8e>] ? kernel_init+0x0/0x1bd >> [ 0.176000] [<ffffffff81003b80>] ? kernel_thread_helper+0x0/0x10 >> [ 0.176000] ---[ end trace 4eaa2a86a8e2da22 ]--- >> [ 0.180000] alloc irq_desc for 33 on node 0 >> [ 0.180000] alloc kstat_irqs on node 0 >> [ 0.180000] alloc irq_desc for 35 on node 0 >> [ 0.180000] alloc kstat_irqs on node 0 >> [ 0.180000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >> [ 0.220000] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03 >> [ 0.340000] NMI watchdog failed to create perf event on cpu0: >> ffffffffffffffed > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() 2010-08-24 13:22 ` Marcelo Tosatti 2010-08-24 15:11 ` Tharindu Rukshan Bamunuarachchi @ 2010-08-24 15:41 ` Tharindu Rukshan Bamunuarachchi 1 sibling, 0 replies; 6+ messages in thread From: Tharindu Rukshan Bamunuarachchi @ 2010-08-24 15:41 UTC (permalink / raw) To: Marcelo Tosatti; +Cc: x86, kvm it worked. thankx a lot. On Tue, Aug 24, 2010 at 2:22 PM, Marcelo Tosatti <mtosatti@redhat.com> wrote: >> [ 0.000000] NR_IRQS:4352 nr_irqs:512 >> [ 0.000000] Console: colour VGA+ 80x25 >> [ 0.000000] console [tty0] enabled >> [ 0.000000] ODEBUG: 0 of 0 active objects replaced >> [ 0.000000] Fast TSC calibration failed >> [ 0.000000] TSC: Unable to calibrate against PIT >> [ 0.000000] TSC: No reference (HPET/PMTIMER) available >> [ 0.000000] Marking TSC unstable due to could not calculate TSC khz >> [ 0.052000] Calibrating delay loop... 3932.16 BogoMIPS (lpj=7864320) > > Enabling CONFIG_KVM_GUEST and CONFIG_KVM_CLOCK should fix the warning. > >> [ 0.148000] pid_max: default: 32768 minimum: 301 >> [ 0.148000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) >> [ 0.152000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) >> [ 0.152000] Mount-cache hash table entries: 256 >> [ 0.152000] Performance Events: unsupported p6 CPU model 2 no PMU >> driver, software events only. >> [ 0.160000] Freeing SMP alternatives: 12k freed >> [ 0.160000] Setting APIC routing to flat >> [ 0.164000] ------------[ cut here ]------------ >> [ 0.164000] WARNING: at arch/x86/kernel/apic/apic.c:1238 >> setup_local_APIC+0x169/0x24b() >> [ 0.164000] Hardware name: Bochs >> [ 0.168000] Pid: 1, comm: swapper Not tainted 2.6.36-rc1-tinux+ #89 >> [ 0.168000] Call Trace: >> [ 0.168000] [<ffffffff8103e0a5>] warn_slowpath_common+0x75/0xb0 >> [ 0.168000] [<ffffffff8103e1a5>] warn_slowpath_null+0x15/0x20 >> [ 0.172000] [<ffffffff816b708a>] setup_local_APIC+0x169/0x24b >> [ 0.172000] [<ffffffff81694f6f>] native_smp_prepare_cpus+0x322/0x3ff >> [ 0.172000] [<ffffffff8168fce5>] kernel_init+0x57/0x1bd >> [ 0.172000] [<ffffffff81003b84>] kernel_thread_helper+0x4/0x10 >> [ 0.176000] [<ffffffff8168fc8e>] ? kernel_init+0x0/0x1bd >> [ 0.176000] [<ffffffff81003b80>] ? kernel_thread_helper+0x0/0x10 >> [ 0.176000] ---[ end trace 4eaa2a86a8e2da22 ]--- >> [ 0.180000] alloc irq_desc for 33 on node 0 >> [ 0.180000] alloc kstat_irqs on node 0 >> [ 0.180000] alloc irq_desc for 35 on node 0 >> [ 0.180000] alloc kstat_irqs on node 0 >> [ 0.180000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >> [ 0.220000] CPU0: Intel QEMU Virtual CPU version 0.12.3 stepping 03 >> [ 0.340000] NMI watchdog failed to create perf event on cpu0: >> ffffffffffffffed > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-08-24 15:42 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-08-17 18:09 WARNING: at arch/x86/kernel/apic/apic.c:1238 setup_local_APIC+0x169/0x24b() Tharindu Rukshan Bamunuarachchi 2010-08-23 21:21 ` Marcelo Tosatti 2010-08-24 3:14 ` Tharindu Rukshan Bamunuarachchi 2010-08-24 13:22 ` Marcelo Tosatti 2010-08-24 15:11 ` Tharindu Rukshan Bamunuarachchi 2010-08-24 15:41 ` Tharindu Rukshan Bamunuarachchi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox