From: "Michael S. Tsirkin" <mst@redhat.com>
To: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>, kvm@vger.kernel.org
Subject: Re: [PATCH 8/9] Protect qemu-kvm.h declarations with NEED_CPU_H
Date: Mon, 20 Sep 2010 19:05:00 +0200 [thread overview]
Message-ID: <20100920170500.GE29862@redhat.com> (raw)
In-Reply-To: <1284995210-32432-9-git-send-email-avi@redhat.com>
On Mon, Sep 20, 2010 at 05:06:49PM +0200, Avi Kivity wrote:
> Target-specific definitions need to be qualified with NEED_CPU_H so kvm.h
> can be included from non-target-specific files.
>
> Signed-off-by: Avi Kivity <avi@redhat.com>
Long term, would be cleaner to split this into two files ...
> ---
> kvm-stub.c | 1 +
> qemu-kvm.h | 21 ++++++++++++++++++++-
> 2 files changed, 21 insertions(+), 1 deletions(-)
>
> diff --git a/kvm-stub.c b/kvm-stub.c
> index 37d2b7a..2e4bf00 100644
> --- a/kvm-stub.c
> +++ b/kvm-stub.c
> @@ -169,3 +169,4 @@ bool kvm_msix_notify(PCIDevice *dev, unsigned vector)
> {
> return false;
> }
> +
intentional?
> diff --git a/qemu-kvm.h b/qemu-kvm.h
> index 9809574..66ae18f 100644
> --- a/qemu-kvm.h
> +++ b/qemu-kvm.h
> @@ -8,7 +8,9 @@
> #ifndef THE_ORIGINAL_AND_TRUE_QEMU_KVM_H
> #define THE_ORIGINAL_AND_TRUE_QEMU_KVM_H
>
> +#ifdef NEED_CPU_H
> #include "cpu.h"
> +#endif
>
> #include <signal.h>
> #include <stdlib.h>
> @@ -794,6 +796,8 @@ typedef struct kvm_vcpu_context *kvm_vcpu_context_t;
> struct kvm_pit_state {
> };
>
> +#ifdef NEED_CPU_H
> +
> static inline void kvm_inject_x86_mce(CPUState *cenv, int bank,
> uint64_t status, uint64_t mcg_status,
> uint64_t addr, uint64_t misc,
> @@ -803,8 +807,9 @@ static inline void kvm_inject_x86_mce(CPUState *cenv, int bank,
> abort();
> }
>
> -#endif /* !CONFIG_KVM */
> +#endif
>
> +#endif /* !CONFIG_KVM */
>
> /*!
> * \brief Create new KVM context
> @@ -820,9 +825,11 @@ int kvm_init(int smp_cpus);
>
> int kvm_main_loop(void);
> int kvm_init_ap(void);
> +#ifdef NEED_CPU_H
> int kvm_vcpu_inited(CPUState *env);
> void kvm_save_lapic(CPUState *env);
> void kvm_load_lapic(CPUState *env);
> +#endif
>
> void kvm_hpet_enable_kpit(void);
> void kvm_hpet_disable_kpit(void);
> @@ -830,11 +837,13 @@ int kvm_set_irq(int irq, int level, int *status);
>
> int kvm_physical_memory_set_dirty_tracking(int enable);
>
> +#ifdef NEED_CPU_H
> void qemu_kvm_call_with_env(void (*func)(void *), void *data, CPUState *env);
> void qemu_kvm_cpuid_on_env(CPUState *env);
> void kvm_inject_interrupt(CPUState *env, int mask);
> void kvm_update_after_sipi(CPUState *env);
> void kvm_update_interrupt_request(CPUState *env);
> +#endif
> #ifndef CONFIG_USER_ONLY
> void *kvm_cpu_create_phys_mem(target_phys_addr_t start_addr, unsigned long size,
> int log, int writable);
> @@ -850,6 +859,7 @@ int kvm_qemu_destroy_memory_alias(uint64_t phys_start);
>
> int kvm_arch_qemu_create_context(void);
>
> +#ifdef NEED_CPU_H
> void kvm_arch_save_regs(CPUState *env);
> void kvm_arch_load_regs(CPUState *env, int level);
> int kvm_arch_has_work(CPUState *env);
> @@ -858,12 +868,15 @@ int kvm_arch_try_push_interrupts(void *opaque);
> void kvm_arch_push_nmi(void *opaque);
> void kvm_arch_cpu_reset(CPUState *env);
> int kvm_set_boot_cpu_id(uint32_t id);
> +#endif
>
> void qemu_kvm_aio_wait_start(void);
> void qemu_kvm_aio_wait(void);
> void qemu_kvm_aio_wait_end(void);
>
> +#ifdef NEED_CPU_H
> void kvm_tpr_access_report(CPUState *env, uint64_t rip, int is_write);
> +#endif
>
> int kvm_arch_init_irq_routing(void);
>
> @@ -873,15 +886,20 @@ int kvm_mmio_write(void *opaque, uint64_t addr, uint8_t * data, int len);
> #ifdef CONFIG_KVM_DEVICE_ASSIGNMENT
> struct ioperm_data;
>
> +#ifdef NEED_CPU_H
> void kvm_ioperm(CPUState *env, void *data);
> void kvm_add_ioperm_data(struct ioperm_data *data);
> void kvm_remove_ioperm_data(unsigned long start_port, unsigned long num);
> void kvm_arch_do_ioperm(void *_data);
> #endif
> +#endif
>
> #define ALIGN(x, y) (((x)+(y)-1) & ~((y)-1))
> +#ifdef NEED_CPU_H
> #define BITMAP_SIZE(m) (ALIGN(((m)>>TARGET_PAGE_BITS), HOST_LONG_BITS) / 8)
> +#endif
>
> +#ifdef NEED_CPU_H
> #ifdef CONFIG_KVM
> #include "qemu-queue.h"
>
> @@ -915,6 +933,7 @@ int handle_tpr_access(void *opaque, CPUState *env, uint64_t rip,
> #endif
> #define qemu_kvm_cpu_stop(env) do {} while(0)
> #endif
> +#endif
>
> #ifdef CONFIG_KVM
>
> --
> 1.7.2.3
next prev parent reply other threads:[~2010-09-20 17:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-20 15:06 [PATCH 0/9] msix/kvm integration cleanups Avi Kivity
2010-09-20 15:06 ` [PATCH 1/9] msix: avoid leaking kvm data on init failure Avi Kivity
2010-09-20 15:06 ` [PATCH 2/9] msix: make kvm specific initialization a function Avi Kivity
2010-09-20 15:06 ` [PATCH 3/9] msix: move kvm specific msix notify into " Avi Kivity
2010-09-20 15:06 ` [PATCH 4/9] msix: move definitions from msix.c to msix.h Avi Kivity
2010-09-20 16:56 ` Michael S. Tsirkin
2010-09-21 16:03 ` Avi Kivity
2010-09-20 15:06 ` [PATCH 5/9] Add missing #include to hw/irq.h Avi Kivity
2010-09-20 15:06 ` [PATCH 6/9] msix: move kvm support functions to kvm-all.c and kvm-stub.c Avi Kivity
2010-09-20 15:06 ` [PATCH 7/9] msix: Move kvm_enabled() guards to kvm-all.c functions Avi Kivity
2010-09-20 15:06 ` [PATCH 8/9] Protect qemu-kvm.h declarations with NEED_CPU_H Avi Kivity
2010-09-20 17:05 ` Michael S. Tsirkin [this message]
2010-09-21 16:03 ` Avi Kivity
2010-09-20 15:06 ` [PATCH 9/9] Move msix.o build back to Makefile.objs Avi Kivity
2010-09-20 17:02 ` [PATCH 0/9] msix/kvm integration cleanups Michael S. Tsirkin
2010-09-21 16:05 ` Avi Kivity
2010-09-21 16:14 ` Michael S. Tsirkin
2010-10-06 9:39 ` Michael S. Tsirkin
2010-10-06 9:50 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100920170500.GE29862@redhat.com \
--to=mst@redhat.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox