From: Alex Williamson <alex.williamson@redhat.com>
To: kvm@vger.kernel.org, mst@redhat.com
Cc: qemu-devel@nongnu.org, alex.williamson@redhat.com, chrisw@redhat.com
Subject: [PATCH v2 4/9] pci: Replace used bitmap with capability byte map
Date: Fri, 12 Nov 2010 10:46:36 -0700 [thread overview]
Message-ID: <20101112174633.3169.73008.stgit@s20.home> (raw)
In-Reply-To: <20101112173929.3169.47618.stgit@s20.home>
Capabilities are allocated in bytes, so we can track both whether
a byte is used and by what capability in the same structure.
Remove pci_reserve_capability() as there are no users.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
---
hw/pci.c | 16 +++++-----------
hw/pci.h | 6 ++----
2 files changed, 7 insertions(+), 15 deletions(-)
diff --git a/hw/pci.c b/hw/pci.c
index 607eb27..80610b3 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -730,7 +730,7 @@ static void pci_config_alloc(PCIDevice *pci_dev)
pci_dev->config = qemu_mallocz(config_size);
pci_dev->cmask = qemu_mallocz(config_size);
pci_dev->wmask = qemu_mallocz(config_size);
- pci_dev->used = qemu_mallocz(config_size);
+ pci_dev->cap_map = qemu_mallocz(config_size);
}
static void pci_config_free(PCIDevice *pci_dev)
@@ -738,7 +738,7 @@ static void pci_config_free(PCIDevice *pci_dev)
qemu_free(pci_dev->config);
qemu_free(pci_dev->cmask);
qemu_free(pci_dev->wmask);
- qemu_free(pci_dev->used);
+ qemu_free(pci_dev->cap_map);
}
/* -1 for devfn means auto assign */
@@ -1929,7 +1929,7 @@ static int pci_find_space(PCIDevice *pdev, uint8_t size)
int offset = PCI_CONFIG_HEADER_SIZE;
int i;
for (i = PCI_CONFIG_HEADER_SIZE; i < config_size; ++i)
- if (pdev->used[i])
+ if (pdev->cap_map[i])
offset = i + 1;
else if (i - offset + 1 == size)
return offset;
@@ -2034,7 +2034,7 @@ int pci_add_capability_at_offset(PCIDevice *pdev, uint8_t cap_id,
config[PCI_CAP_LIST_ID] = cap_id;
config[PCI_CAP_LIST_NEXT] = pdev->config[PCI_CAPABILITY_LIST];
pdev->config[PCI_CAPABILITY_LIST] = offset;
- memset(pdev->used + offset, 0xFF, size);
+ memset(pdev->cap_map + offset, cap_id, size);
/* Make capability read-only by default */
memset(pdev->wmask + offset, 0, size);
/* Check capability by default */
@@ -2069,7 +2069,7 @@ void pci_del_capability(PCIDevice *pdev, uint8_t cap_id, uint8_t size)
memset(pdev->wmask + offset, 0xff, size);
/* Clear cmask as device-specific registers can't be checked */
memset(pdev->cmask + offset, 0, size);
- memset(pdev->used + offset, 0, size);
+ memset(pdev->cap_map + offset, 0, size);
if (!pdev->config[PCI_CAPABILITY_LIST]) {
pdev->config[PCI_STATUS] &= ~PCI_STATUS_CAP_LIST;
@@ -2077,12 +2077,6 @@ void pci_del_capability(PCIDevice *pdev, uint8_t cap_id, uint8_t size)
}
}
-/* Reserve space for capability at a known offset (to call after load). */
-void pci_reserve_capability(PCIDevice *pdev, uint8_t offset, uint8_t size)
-{
- memset(pdev->used + offset, 0xff, size);
-}
-
uint8_t pci_find_capability(PCIDevice *pdev, uint8_t cap_id)
{
return pci_find_capability_list(pdev, cap_id, NULL);
diff --git a/hw/pci.h b/hw/pci.h
index 0712e55..2265c70 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -151,8 +151,8 @@ struct PCIDevice {
/* Used to implement R/W bytes */
uint8_t *wmask;
- /* Used to allocate config space for capabilities. */
- uint8_t *used;
+ /* Used to allocate config space and track capabilities. */
+ uint8_t *cap_map;
/* the following fields are read only */
PCIBus *bus;
@@ -239,8 +239,6 @@ int pci_add_capability_at_offset(PCIDevice *pci_dev, uint8_t cap_id,
void pci_del_capability(PCIDevice *pci_dev, uint8_t cap_id, uint8_t cap_size);
-void pci_reserve_capability(PCIDevice *pci_dev, uint8_t offset, uint8_t size);
-
uint8_t pci_find_capability(PCIDevice *pci_dev, uint8_t cap_id);
uint32_t pci_default_read_config(PCIDevice *d,
next prev parent reply other threads:[~2010-11-12 17:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-11-12 17:45 [PATCH v2 0/9] PCI capability and device assignment improvements Alex Williamson
2010-11-12 17:46 ` [PATCH v2 1/9] pci: pci_default_cap_write_config ignores wmask Alex Williamson
2010-11-13 21:09 ` Michael S. Tsirkin
2010-11-16 21:33 ` Marcelo Tosatti
2010-11-12 17:46 ` [PATCH v2 2/9] pci: Remove pci_enable_capability_support() Alex Williamson
2010-11-12 17:46 ` [PATCH v2 3/9] device-assignment: Use PCI capabilities support Alex Williamson
2010-11-12 17:46 ` Alex Williamson [this message]
2010-11-12 17:46 ` [PATCH v2 5/9] pci: Remove cap.length, cap.start, cap.supported Alex Williamson
2010-11-12 17:46 ` [PATCH v2 6/9] device-assignment: Move PCI capabilities to match physical hardware Alex Williamson
2010-11-12 17:47 ` [PATCH v2 7/9] pci: Pass ID for capability read/write handlers Alex Williamson
2010-11-12 17:47 ` [PATCH v2 8/9] pci: Remove capability read/write config handlers Alex Williamson
2010-11-12 17:47 ` [PATCH v2 9/9] pci: Store capability offsets in PCIDevice Alex Williamson
2010-11-13 21:05 ` Michael S. Tsirkin
2010-11-15 3:49 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101112174633.3169.73008.stgit@s20.home \
--to=alex.williamson@redhat.com \
--cc=chrisw@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mst@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox