[patch 0/2] small fixes for PCI devices in mptable

[patch 0/2] small fixes for PCI devices in mptable

[Cyrill Gorcunov]

Please review.

Thanks,
 Cyrill

[patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Cyrill Gorcunov]

[-- Attachment #1: kvm-tools-irq-pins --]
[-- Type: text/plain, Size: 1051 bytes --]

Only 4 pins are allowed for every PCI compilant device. Mutlifunctional
devices can use up to all INTA#,B#,C#,D# pins, for our sindle function
devices pin INTA# is enough.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
---
 tools/kvm/irq.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Index: linux-2.6.git/tools/kvm/irq.c
=====================================================================
--- linux-2.6.git.orig/tools/kvm/irq.c
+++ linux-2.6.git/tools/kvm/irq.c
@@ -7,7 +7,6 @@
 #include <stddef.h>
 #include <stdlib.h>
 
-static u8		next_pin	= 1;
 static u8		next_line	= 3;
 static u8		next_dev	= 1;
 static struct rb_root	pci_tree	= RB_ROOT;
@@ -71,7 +70,13 @@ int irq__register_device(u32 dev, u8 *nu
 
 		*node = (struct pci_dev) {
 			.id	= dev,
-			.pin	= next_pin++,
+			/*
+			 * PCI supports only INTA#,B#,C#,D# per device.
+			 * B#,C#,D# are allowed for multifunctional
+			 * devices so stick with INTA# for our single
+			 * function devices.
+			 */
+			.pin	= 1,
 		};
 
 		INIT_LIST_HEAD(&node->lines);

Re: [patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Ingo Molnar]

* Cyrill Gorcunov <gorcunov@gmail.com> wrote:

> Only 4 pins are allowed for every PCI compilant device. Mutlifunctional
> devices can use up to all INTA#,B#,C#,D# pins, for our sindle function
> devices pin INTA# is enough.

There's two typos in this changelog ...

Thanks,

	Ingo

Re: [patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Cyrill Gorcunov]

On 05/07/2011 07:03 PM, Ingo Molnar wrote:
> 
> * Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> 
>> Only 4 pins are allowed for every PCI compilant device. Mutlifunctional
>> devices can use up to all INTA#,B#,C#,D# pins, for our sindle function
>> devices pin INTA# is enough.
> 
> There's two typos in this changelog ...
> 
> Thanks,
> 
> 	Ingo

Ouch, I've fixed 'sindle', but missed 'compilant', thanks Ingo!

Pekka if you pick them (second series), could you s/compilant/compliant/
please?

-- 
Thanks,
  Cyrill

Re: [patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Ingo Molnar]

* Cyrill Gorcunov <gorcunov@gmail.com> wrote:

> On 05/07/2011 07:03 PM, Ingo Molnar wrote:
> > 
> > * Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> > 
> >> Only 4 pins are allowed for every PCI compilant device. Mutlifunctional
> >> devices can use up to all INTA#,B#,C#,D# pins, for our sindle function
> >> devices pin INTA# is enough.
> > 
> > There's two typos in this changelog ...
> > 
> > Thanks,
> > 
> > 	Ingo
> 
> Ouch, I've fixed 'sindle', but missed 'compilant', thanks Ingo!
> 
> Pekka if you pick them (second series), could you s/compilant/compliant/
> please?

There's a third typo as well: s/Mutlifunctional/Multifunctional.

Thanks,

	Ingo

Re: [patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Cyrill Gorcunov]

On 05/07/2011 07:08 PM, Ingo Molnar wrote:
..
> 
> There's a third typo as well: s/Mutlifunctional/Multifunctional.
> 
> Thanks,
> 
> 	Ingo

Sigh, thanks Ingo.

-- 
Thanks,
  Cyrill

Re: [patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Ingo Molnar]

* Ingo Molnar <mingo@elte.hu> wrote:

> 
> * Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> 
> > Only 4 pins are allowed for every PCI compilant device. Mutlifunctional
> > devices can use up to all INTA#,B#,C#,D# pins, for our sindle function
> > devices pin INTA# is enough.
> 
> There's two typos in this changelog ...

Three in fact.

Thanks,

	Ingo

Re: [patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Pekka Enberg]

On Sat, May 7, 2011 at 5:55 PM, Cyrill Gorcunov <gorcunov@gmail.com> wrote:
> Only 4 pins are allowed for every PCI compilant device. Mutlifunctional
> devices can use up to all INTA#,B#,C#,D# pins, for our sindle function
> devices pin INTA# is enough.
>
> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>

Could you point me to the relevant specification and section that I
can use to double-check this patch (and include it in the changelog)?

Re: [patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Cyrill Gorcunov]

On 05/07/2011 07:05 PM, Pekka Enberg wrote:
> On Sat, May 7, 2011 at 5:55 PM, Cyrill Gorcunov <gorcunov@gmail.com> wrote:
>> Only 4 pins are allowed for every PCI compilant device. Mutlifunctional
>> devices can use up to all INTA#,B#,C#,D# pins, for our sindle function
>> devices pin INTA# is enough.
>>
>> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
> 
> Could you point me to the relevant specification and section that I
> can use to double-check this patch (and include it in the changelog)?

PCI spec 2.2, 2.2.6 Interrupt Pins (Optional)

-- 
Thanks,
  Cyrill

[patch 2/2] kvm tools: mptable -- Fix up srcbusirq assignment for PCI devices

[Cyrill Gorcunov]

[-- Attachment #1: kvm-tools-fix-srcbusirq --]
[-- Type: text/plain, Size: 1233 bytes --]

The kernel expects srcbusirq follows MP specification and consists
a tuple of PCI device number with pin encoded. Make it so, otherwise
the kernel reports kind of "buggy MP table" found.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
---
 tools/kvm/mptable.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

Index: linux-2.6.git/tools/kvm/mptable.c
=====================================================================
--- linux-2.6.git.orig/tools/kvm/mptable.c
+++ linux-2.6.git/tools/kvm/mptable.c
@@ -191,12 +191,16 @@ void mptable_setup(struct kvm *kvm, unsi
 
 	for (pci_tree = irq__get_pci_tree(); pci_tree; pci_tree = rb_next(pci_tree)) {
 		struct pci_dev *dev = rb_entry(pci_tree, struct pci_dev, node);
-		struct irq_line *tmp;
+		struct irq_line *irq_line;
+
+		list_for_each_entry(irq_line, &dev->lines, node) {
+			unsigned char srcbusirq;
+
+			srcbusirq = (dev->id << 2) | (dev->pin - 1);
 
-		list_for_each_entry(tmp, &dev->lines, node) {
 			mpc_intsrc = last_addr;
 
-			mptable_add_irq_src(mpc_intsrc, pcibusid, dev->pin, ioapicid, tmp->line);
+			mptable_add_irq_src(mpc_intsrc, pcibusid, dev->pin, ioapicid, irq_line->line);
 			last_addr = (void *)&mpc_intsrc[1];
 			nentries++;
 		}

Re: [patch 2/2] kvm tools: mptable -- Fix up srcbusirq assignment for PCI devices

[Cyrill Gorcunov]

On 05/07/2011 06:55 PM, Cyrill Gorcunov wrote:
> The kernel expects srcbusirq follows MP specification and consists
> a tuple of PCI device number with pin encoded. Make it so, otherwise
> the kernel reports kind of "buggy MP table" found.
> 
> Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
> ---
>  tools/kvm/mptable.c |   10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> Index: linux-2.6.git/tools/kvm/mptable.c
> =====================================================================
> --- linux-2.6.git.orig/tools/kvm/mptable.c
> +++ linux-2.6.git/tools/kvm/mptable.c
> @@ -191,12 +191,16 @@ void mptable_setup(struct kvm *kvm, unsi
>  
>  	for (pci_tree = irq__get_pci_tree(); pci_tree; pci_tree = rb_next(pci_tree)) {
>  		struct pci_dev *dev = rb_entry(pci_tree, struct pci_dev, node);
> -		struct irq_line *tmp;
> +		struct irq_line *irq_line;
> +
> +		list_for_each_entry(irq_line, &dev->lines, node) {
> +			unsigned char srcbusirq;
> +
> +			srcbusirq = (dev->id << 2) | (dev->pin - 1);
>  
> -		list_for_each_entry(tmp, &dev->lines, node) {
>  			mpc_intsrc = last_addr;
>  
> -			mptable_add_irq_src(mpc_intsrc, pcibusid, dev->pin, ioapicid, tmp->line);
> +			mptable_add_irq_src(mpc_intsrc, pcibusid, dev->pin, ioapicid, irq_line->line);
>  			last_addr = (void *)&mpc_intsrc[1];
>  			nentries++;
>  		}
> 

Crap, forgot to update quilt. Pekka drop this series please.

-- 
Thanks,
  Cyrill

[patch 0/2] kvm tools, minor nits fixes, updated

[Cyrill Gorcunov]

Here is an updated series, please review.

Thanks,
 Cyrill

[patch 1/2] kvm tools: Fix up PCI pin assignment to conform specification

[Cyrill Gorcunov]

[-- Attachment #1: kvm-tools-irq-pins --]
[-- Type: text/plain, Size: 1051 bytes --]

Only 4 pins are allowed for every PCI compilant device. Mutlifunctional
devices can use up to all INTA#,B#,C#,D# pins, for our sindle function
devices pin INTA# is enough.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
---
 tools/kvm/irq.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Index: linux-2.6.git/tools/kvm/irq.c
=====================================================================
--- linux-2.6.git.orig/tools/kvm/irq.c
+++ linux-2.6.git/tools/kvm/irq.c
@@ -7,7 +7,6 @@
 #include <stddef.h>
 #include <stdlib.h>
 
-static u8		next_pin	= 1;
 static u8		next_line	= 3;
 static u8		next_dev	= 1;
 static struct rb_root	pci_tree	= RB_ROOT;
@@ -71,7 +70,13 @@ int irq__register_device(u32 dev, u8 *nu
 
 		*node = (struct pci_dev) {
 			.id	= dev,
-			.pin	= next_pin++,
+			/*
+			 * PCI supports only INTA#,B#,C#,D# per device.
+			 * A#,B#,C#,D# are allowed for multifunctional
+			 * devices so stick with A# for our single
+			 * function devices.
+			 */
+			.pin	= 1,
 		};
 
 		INIT_LIST_HEAD(&node->lines);