From: Takuya Yoshikawa <takuya.yoshikawa@gmail.com>
To: avi@redhat.com, mtosatti@redhat.com
Cc: kvm@vger.kernel.org, yoshikawa.takuya@oss.ntt.co.jp, gleb@redhat.com
Subject: [PATCH 07/10] KVM: x86 emulator: Use opcode::execute for MOV(8C/8E)
Date: Sun, 29 May 2011 22:01:33 +0900 [thread overview]
Message-ID: <20110529220133.e3ff326b.takuya.yoshikawa@gmail.com> (raw)
In-Reply-To: <20110529215200.17be7761.takuya.yoshikawa@gmail.com>
From: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Different functions for those which take segment register operands.
Signed-off-by: Takuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
---
arch/x86/kvm/emulate.c | 59 +++++++++++++++++++++++++----------------------
1 files changed, 31 insertions(+), 28 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 759ec7c..7a06fb2 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -2681,6 +2681,33 @@ static int em_mov(struct x86_emulate_ctxt *ctxt)
return X86EMUL_CONTINUE;
}
+static int em_mov_rm_sreg(struct x86_emulate_ctxt *ctxt)
+{
+ struct decode_cache *c = &ctxt->decode;
+
+ if (c->modrm_reg > VCPU_SREG_GS)
+ return emulate_ud(ctxt);
+
+ c->dst.val = get_segment_selector(ctxt, c->modrm_reg);
+ return X86EMUL_CONTINUE;
+}
+
+static int em_mov_sreg_rm(struct x86_emulate_ctxt *ctxt)
+{
+ struct decode_cache *c = &ctxt->decode;
+ u16 sel = c->src.val;
+
+ if (c->modrm_reg == VCPU_SREG_CS || c->modrm_reg > VCPU_SREG_GS)
+ return emulate_ud(ctxt);
+
+ if (c->modrm_reg == VCPU_SREG_SS)
+ ctxt->interruptibility = KVM_X86_SHADOW_INT_MOV_SS;
+
+ /* Disable writeback. */
+ c->dst.type = OP_NONE;
+ return load_segment_descriptor(ctxt, sel, c->modrm_reg);
+}
+
static int em_movdqu(struct x86_emulate_ctxt *ctxt)
{
struct decode_cache *c = &ctxt->decode;
@@ -3170,8 +3197,10 @@ static struct opcode opcode_table[256] = {
/* 0x88 - 0x8F */
I2bv(DstMem | SrcReg | ModRM | Mov, em_mov),
I2bv(DstReg | SrcMem | ModRM | Mov, em_mov),
- D(DstMem | SrcNone | ModRM | Mov), D(ModRM | SrcMem | NoAccess | DstReg),
- D(ImplicitOps | SrcMem16 | ModRM), G(0, group1A),
+ I(DstMem | SrcNone | ModRM | Mov, em_mov_rm_sreg),
+ D(ModRM | SrcMem | NoAccess | DstReg),
+ I(ImplicitOps | SrcMem16 | ModRM, em_mov_sreg_rm),
+ G(0, group1A),
/* 0x90 - 0x97 */
DI(SrcAcc | DstReg, pause), X7(D(SrcAcc | DstReg)),
/* 0x98 - 0x9F */
@@ -3890,35 +3919,9 @@ special_insn:
if (test_cc(c->b, ctxt->eflags))
jmp_rel(c, c->src.val);
break;
- case 0x8c: /* mov r/m, sreg */
- if (c->modrm_reg > VCPU_SREG_GS) {
- rc = emulate_ud(ctxt);
- goto done;
- }
- c->dst.val = get_segment_selector(ctxt, c->modrm_reg);
- break;
case 0x8d: /* lea r16/r32, m */
c->dst.val = c->src.addr.mem.ea;
break;
- case 0x8e: { /* mov seg, r/m16 */
- uint16_t sel;
-
- sel = c->src.val;
-
- if (c->modrm_reg == VCPU_SREG_CS ||
- c->modrm_reg > VCPU_SREG_GS) {
- rc = emulate_ud(ctxt);
- goto done;
- }
-
- if (c->modrm_reg == VCPU_SREG_SS)
- ctxt->interruptibility = KVM_X86_SHADOW_INT_MOV_SS;
-
- rc = load_segment_descriptor(ctxt, sel, c->modrm_reg);
-
- c->dst.type = OP_NONE; /* Disable writeback. */
- break;
- }
case 0x8f: /* pop (sole member of Grp1a) */
rc = em_grp1a(ctxt);
break;
--
1.7.4.1
next prev parent reply other threads:[~2011-05-29 13:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-29 12:52 [PATCH 00/10] KVM: x86 emulator: Some cleanups and conversion to opcode::execute Takuya Yoshikawa
2011-05-29 12:53 ` [PATCH 01/10] KVM: x86 emulator: Use the pointers ctxt and c consistently Takuya Yoshikawa
2011-05-29 12:55 ` [PATCH 02/10] KVM: x86 emulator: Rename emulate_xxx() to em_xxx() Takuya Yoshikawa
2011-05-29 12:56 ` [PATCH 03/10] KVM: x86 emulator: Use opcode::execute for some instructions Takuya Yoshikawa
2011-05-29 12:57 ` [PATCH 04/10] KVM: x86 emulator: Use opcode::execute for TEST(84/85, A8/A9) Takuya Yoshikawa
2011-05-29 12:59 ` [PATCH 05/10] KVM: x86 emulator: Use opcode::execute for XCHG(86/87) Takuya Yoshikawa
2011-05-29 13:00 ` [PATCH 06/10] KVM: x86 emulator: Use opcode::execute for RET(C3) Takuya Yoshikawa
2011-05-29 13:01 ` Takuya Yoshikawa [this message]
2011-05-29 13:02 ` [PATCH 08/10] KVM: x86 emulator: Clean up INT n/INTO/INT 3(CC/CD/CE) Takuya Yoshikawa
2011-05-29 13:04 ` [PATCH 09/10] KVM: x86 emulator: Use opcode::execute for LOOP/JCXZ Takuya Yoshikawa
2011-05-29 13:05 ` [PATCH 10/10] KVM: x86 emulator: Use opcode::execute for CLI/STI(FA/FB) Takuya Yoshikawa
2011-05-31 18:33 ` [PATCH 00/10] KVM: x86 emulator: Some cleanups and conversion to opcode::execute Marcelo Tosatti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110529220133.e3ff326b.takuya.yoshikawa@gmail.com \
--to=takuya.yoshikawa@gmail.com \
--cc=avi@redhat.com \
--cc=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=yoshikawa.takuya@oss.ntt.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox