From: Gleb Natapov <gleb@redhat.com>
To: Kevin Wolf <kwolf@redhat.com>
Cc: avi@redhat.com, kvm@vger.kernel.org
Subject: Re: [PATCH kvm-unit-tests 4/4] x86/taskswitch_vm86: Task switches into/out of VM86
Date: Mon, 23 Jan 2012 18:10:17 +0200 [thread overview]
Message-ID: <20120123161017.GA12119@redhat.com> (raw)
In-Reply-To: <1327334833-31650-5-git-send-email-kwolf@redhat.com>
On Mon, Jan 23, 2012 at 05:07:13PM +0100, Kevin Wolf wrote:
> This adds a test case that jumps into VM86 by iret-ing to a TSS and back
> to Protected Mode using a task gate in the IDT.
>
Can you add the test case to taskswitch2.c?
> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
> ---
> config-i386.mak | 3 +-
> lib/x86/desc.c | 37 +-----------------------------
> lib/x86/desc.h | 36 +++++++++++++++++++++++++++++
> lib/x86/vm.c | 4 +-
> lib/x86/vm.h | 1 +
> x86/taskswitch_vm86.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
> x86/unittests.cfg | 6 +++++
> 7 files changed, 107 insertions(+), 39 deletions(-)
> create mode 100644 x86/taskswitch_vm86.c
>
> diff --git a/config-i386.mak b/config-i386.mak
> index de52f3d..b5c3b9c 100644
> --- a/config-i386.mak
> +++ b/config-i386.mak
> @@ -5,9 +5,10 @@ ldarch = elf32-i386
> CFLAGS += -D__i386__
> CFLAGS += -I $(KERNELDIR)/include
>
> -tests = $(TEST_DIR)/taskswitch.flat $(TEST_DIR)/taskswitch2.flat
> +tests = $(TEST_DIR)/taskswitch.flat $(TEST_DIR)/taskswitch2.flat $(TEST_DIR)/taskswitch_vm86.flat
>
> include config-x86-common.mak
>
> $(TEST_DIR)/taskswitch.elf: $(cstart.o) $(TEST_DIR)/taskswitch.o
> $(TEST_DIR)/taskswitch2.elf: $(cstart.o) $(TEST_DIR)/taskswitch2.o
> +$(TEST_DIR)/taskswitch_vm86.elf: $(cstart.o) $(TEST_DIR)/taskswitch_vm86.o
> diff --git a/lib/x86/desc.c b/lib/x86/desc.c
> index 770c250..c4a3607 100644
> --- a/lib/x86/desc.c
> +++ b/lib/x86/desc.c
> @@ -27,41 +27,6 @@ typedef struct {
> u8 base_high;
> } gdt_entry_t;
>
> -typedef struct {
> - u16 prev;
> - u16 res1;
> - u32 esp0;
> - u16 ss0;
> - u16 res2;
> - u32 esp1;
> - u16 ss1;
> - u16 res3;
> - u32 esp2;
> - u16 ss2;
> - u16 res4;
> - u32 cr3;
> - u32 eip;
> - u32 eflags;
> - u32 eax, ecx, edx, ebx, esp, ebp, esi, edi;
> - u16 es;
> - u16 res5;
> - u16 cs;
> - u16 res6;
> - u16 ss;
> - u16 res7;
> - u16 ds;
> - u16 res8;
> - u16 fs;
> - u16 res9;
> - u16 gs;
> - u16 res10;
> - u16 ldt;
> - u16 res11;
> - u16 t:1;
> - u16 res12:15;
> - u16 iomap_base;
> -} tss32_t;
> -
> extern idt_entry_t boot_idt[256];
>
> void set_idt_entry(int vec, void *addr, int dpl)
> @@ -327,7 +292,7 @@ void setup_gdt(void)
> ".Lflush2: "::"r"(0x10));
> }
>
> -static void set_idt_task_gate(int vec, u16 sel)
> +void set_idt_task_gate(int vec, u16 sel)
> {
> idt_entry_t *e = &boot_idt[vec];
>
> diff --git a/lib/x86/desc.h b/lib/x86/desc.h
> index 0b4897c..f819452 100644
> --- a/lib/x86/desc.h
> +++ b/lib/x86/desc.h
> @@ -24,6 +24,41 @@ struct ex_regs {
> unsigned long rflags;
> };
>
> +typedef struct {
> + u16 prev;
> + u16 res1;
> + u32 esp0;
> + u16 ss0;
> + u16 res2;
> + u32 esp1;
> + u16 ss1;
> + u16 res3;
> + u32 esp2;
> + u16 ss2;
> + u16 res4;
> + u32 cr3;
> + u32 eip;
> + u32 eflags;
> + u32 eax, ecx, edx, ebx, esp, ebp, esi, edi;
> + u16 es;
> + u16 res5;
> + u16 cs;
> + u16 res6;
> + u16 ss;
> + u16 res7;
> + u16 ds;
> + u16 res8;
> + u16 fs;
> + u16 res9;
> + u16 gs;
> + u16 res10;
> + u16 ldt;
> + u16 res11;
> + u16 t:1;
> + u16 res12:15;
> + u16 iomap_base;
> +} tss32_t;
> +
> #define ASM_TRY(catch) \
> "movl $0, %%gs:4 \n\t" \
> ".pushsection .data.ex \n\t" \
> @@ -44,6 +79,7 @@ unsigned exception_error_code(void);
> void set_idt_entry(int vec, void *addr, int dpl);
> void set_idt_sel(int vec, u16 sel);
> void set_gdt_entry(int num, u32 base, u32 limit, u8 access, u8 gran);
> +void set_idt_task_gate(int vec, u16 sel);
> void set_intr_task_gate(int e, void *fn);
> void print_current_tss_info(void);
> void handle_exception(u8 v, void (*func)(struct ex_regs *regs));
> diff --git a/lib/x86/vm.c b/lib/x86/vm.c
> index abbb0c9..aae044a 100644
> --- a/lib/x86/vm.c
> +++ b/lib/x86/vm.c
> @@ -108,14 +108,14 @@ void install_large_page(unsigned long *cr3,
> unsigned long phys,
> void *virt)
> {
> - install_pte(cr3, 2, virt, phys | PTE_PRESENT | PTE_WRITE | PTE_PSE, 0);
> + install_pte(cr3, 2, virt, phys | PTE_PRESENT | PTE_WRITE | PTE_USER | PTE_PSE, 0);
> }
>
> void install_page(unsigned long *cr3,
> unsigned long phys,
> void *virt)
> {
> - install_pte(cr3, 1, virt, phys | PTE_PRESENT | PTE_WRITE, 0);
> + install_pte(cr3, 1, virt, phys | PTE_PRESENT | PTE_WRITE | PTE_USER, 0);
> }
>
>
> diff --git a/lib/x86/vm.h b/lib/x86/vm.h
> index bf8fd52..aebc5c3 100644
> --- a/lib/x86/vm.h
> +++ b/lib/x86/vm.h
> @@ -13,6 +13,7 @@
> #define PTE_PRESENT (1ull << 0)
> #define PTE_PSE (1ull << 7)
> #define PTE_WRITE (1ull << 1)
> +#define PTE_USER (1ull << 2)
> #define PTE_ADDR (0xffffffffff000ull)
>
> void setup_vm();
> diff --git a/x86/taskswitch_vm86.c b/x86/taskswitch_vm86.c
> new file mode 100644
> index 0000000..363cb00
> --- /dev/null
> +++ b/x86/taskswitch_vm86.c
> @@ -0,0 +1,59 @@
> +#include "libcflat.h"
> +#include "desc.h"
> +#include "processor.h"
> +#include "vm.h"
> +
> +static tss32_t main_tss;
> +static tss32_t vm86_tss;
> +
> +#define FREE_GDT_INDEX 4
> +#define MAIN_TSS_INDEX (FREE_GDT_INDEX + 0)
> +#define VM86_TSS_INDEX (FREE_GDT_INDEX + 1)
> +
> +extern void vm86_start(void);
> +
> +int main(void)
> +{
> + u8 *vm86_start;
> +
> + setup_vm();
> + setup_idt();
> + setup_gdt();
> +
> + /* Write a 'ud2' instruction somewhere below 1 MB */
> + vm86_start = (void*) 0x42000;
> + vm86_start[0] = 0x0f;
> + vm86_start[1] = 0x0b;
> +
> + /* Main TSS */
> + set_gdt_entry(MAIN_TSS_INDEX, (u32)&main_tss, sizeof(tss32_t) - 1, 0x89, 0);
> + ltr(MAIN_TSS_INDEX << 3);
> + main_tss = (tss32_t) {
> + .prev = VM86_TSS_INDEX << 3,
> + .cr3 = read_cr3(),
> + };
> +
> + /* VM86 TSS (marked as busy, so we can iret to it) */
> + set_gdt_entry(VM86_TSS_INDEX, (u32)&vm86_tss, sizeof(tss32_t) - 1, 0x8b, 0);
> + vm86_tss = (tss32_t) {
> + .eflags = 0x20002,
> + .cr3 = read_cr3(),
> + .eip = (u32) vm86_start & 0x0f,
> + .cs = (u32) vm86_start >> 4,
> + .ds = 0x1234,
> + .es = 0x2345,
> + };
> +
> + /* Setup task gate to main TSS for #UD */
> + set_idt_task_gate(6, MAIN_TSS_INDEX << 3);
> +
> + /* Jump into VM86 task with iret, #UD lets it come back immediately */
> + asm volatile(
> + "pushf\n"
> + "orw $0x4000, (%esp)\n"
> + "popf\n"
> + "iret\n"
> + );
> +
> + return 0;
> +}
> diff --git a/x86/unittests.cfg b/x86/unittests.cfg
> index dac7d44..194850b 100644
> --- a/x86/unittests.cfg
> +++ b/x86/unittests.cfg
> @@ -76,6 +76,12 @@ smp = 2
> extra_params = -cpu qemu64,-svm
> groups = task
>
> +[taskswitch_vm86]
> +file = taskswitch_vm86.flat
> +smp = 2
> +extra_params = -cpu qemu64,-svm
> +groups = task
> +
> [kvmclock_test]
> file = kvmclock_test.flat
> smp = 2
> --
> 1.7.6.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Gleb.
next prev parent reply other threads:[~2012-01-23 16:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-23 16:07 [PATCH kvm-unit-tests 0/4] VM86 testcase and run_tests.sh Kevin Wolf
2012-01-23 16:07 ` [PATCH kvm-unit-tests 1/4] Add run_tests.sh Kevin Wolf
2012-01-23 16:07 ` [PATCH kvm-unit-tests 2/4] Add taskswitch testcases to unittest.cfg Kevin Wolf
2012-01-23 16:07 ` [PATCH kvm-unit-tests 3/4] Fix i386 build Kevin Wolf
2012-01-24 9:51 ` Takuya Yoshikawa
2012-01-24 9:58 ` Kevin Wolf
2012-01-23 16:07 ` [PATCH kvm-unit-tests 4/4] x86/taskswitch_vm86: Task switches into/out of VM86 Kevin Wolf
2012-01-23 16:10 ` Gleb Natapov [this message]
2012-01-23 16:20 ` Kevin Wolf
2012-01-23 16:22 ` Gleb Natapov
2012-01-23 16:32 ` Kevin Wolf
2012-01-23 16:42 ` Gleb Natapov
2012-01-24 10:14 ` Kevin Wolf
2012-01-24 10:26 ` Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120123161017.GA12119@redhat.com \
--to=gleb@redhat.com \
--cc=avi@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=kwolf@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox