* general protection fault @ 2012-01-18 4:40 Dyweni - KVM 2012-01-18 5:22 ` Dyweni - KVM 2012-02-02 12:40 ` Avi Kivity 0 siblings, 2 replies; 4+ messages in thread From: Dyweni - KVM @ 2012-01-18 4:40 UTC (permalink / raw) To: KVM, Qemu Devel, Oprofile-List, Linux-Kernel Hi All, I'm not sure who this falls to, so I've included all all parties that I thought may be relevant. I'm getting the following error from my guest kernel when running oprofile within qemu-kvm: general protection fault: 0000 [#1] Modules linked in: Pid: 896, comm: oprofiled Not tainted 3.2.0-rc7-20120117-0605 #1 Bochs Bochs EIP: 0060:[<c14069ae>] EFLAGS: 00010086 CPU: 0 EIP is at nmi_cpu_setup.clone.6+0x2e/0xb0 EAX: 00000000 EBX: df89894c ECX: c0010005 EDX: 00000000 ESI: 00000001 EDI: c168e5c0 EBP: df8addf4 ESP: df8adde4 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process oprofiled (pid: 896, ti=df8ac000 task=df82f780 task.ti=df8ac000) Stack: df898980 00000004 fffffff0 d4520880 df8ade08 c1406d4b c1618dfa 00000000 00000000 df8ade14 c140464f dc792de0 df8ade28 c1405963 d4520880 dc792de0 00000000 df8ade4c c1111bfa c111c7fe df84c000 df8ade44 dc77ef80 df8adeec Call Trace: [<c1406d4b>] nmi_setup+0xab/0xd0 [<c140464f>] oprofile_setup+0x2f/0xb0 [<c1405963>] event_buffer_open+0x63/0x90 [<c1111bfa>] __dentry_open.clone.17+0x1aa/0x2d0 [<c111c7fe>] ? do_lookup+0x3e/0x370 [<c1112c82>] nameidata_to_filp+0x52/0x70 [<c1405900>] ? event_buffer_release+0x40/0x40 [<c111f1b6>] do_last+0x1e6/0x740 [<c111f7ea>] path_openat+0x9a/0x320 [<c10fd854>] ? page_add_new_anon_rmap+0x74/0x80 [<c111fb60>] do_filp_open+0x30/0x80 [<c112904c>] ? alloc_fd+0x2c/0xd0 [<c1112d8b>] do_sys_open+0xeb/0x1c0 [<c1112e89>] sys_open+0x29/0x40 [<c14b0f8c>] sysenter_do_call+0x12/0x22 Code: 57 56 53 83 ec 04 a1 90 e5 68 c1 8b 3d 44 a5 78 c1 8b 1d 8c e5 68 c1 89 45 f0 8b 07 85 c0 74 1d 31 f6 8d 76 00 8b 0b 85 c9 74 08 <0f> 32 89 43 04 89 53 08 83 c6 01 83 c3 0c 3b 37 72 e8 8b 77 04 EIP: [<c14069ae>] nmi_cpu_setup.clone.6+0x2e/0xb0 SS:ESP 0068:df8adde4 ---[ end trace e22f1adcb9f592c1 ]--- My setup is: QEMU-KVM = 0.14.1-r2 Host Linux Kernel = 3.1.6 Guest Linux Kernel = 3.2-rc7 OProfile = 0.9.6-r1 -- Thanks, Dyweni ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: general protection fault 2012-01-18 4:40 general protection fault Dyweni - KVM @ 2012-01-18 5:22 ` Dyweni - KVM 2012-02-02 12:15 ` [Qemu-devel] " Robert Richter 2012-02-02 12:40 ` Avi Kivity 1 sibling, 1 reply; 4+ messages in thread From: Dyweni - KVM @ 2012-01-18 5:22 UTC (permalink / raw) To: KVM, Qemu Devel, Oprofile-List, Linux-Kernel Hi All, I'm getting a very similar error when running oprofile on the host...same version of oprofile... general protection fault: 0000 [#1] PREEMPT SMP CPU 5 Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi vboxnetadp vboxnetflt vboxdrv nvidia(P) Pid: 1498, comm: oprofiled Tainted: P 3.1.6-gentoo-20120114-0749 #1 MSI MS-7578/NF750-G55 (MS-7578) RIP: 0010:[<ffffffff81093758>] [<ffffffff81093758>] raw_notifier_chain_register+0x18/0x40 RSP: 0018:ffff88022ed4dbb8 EFLAGS: 00010206 RAX: 65526d6562574955 RBX: ffffffff8172b4b0 RCX: ffffffff81733ff8 RDX: 0000000000000000 RSI: ffffffff8172b4b0 RDI: ffffffff817ae968 RBP: ffff88022ed4dbb8 R08: ffffffff81734ef0 R09: 0000000000000000 R10: 00003ffffffff000 R11: 0000160000000000 R12: ffffffff81734ef0 R13: 000000000000e160 R14: ffffffff8172b520 R15: 0000000000000005 FS: 00007f7179020700(0000) GS:ffff88033fd40000(0000) knlGS:00000000f75a36c0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000062a000 CR3: 0000000327cd8000 CR4: 00000000000006e0 DR0: 0000000000000001 DR1: 0000000000000002 DR2: 0000000000000001 DR3: 000000000000000a DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process oprofiled (pid: 1498, threadinfo ffff88022ed4c000, task ffff880331635eb0) Stack: ffff88022ed4dbe8 ffffffff814fa020 ffff88022ed4dbe8 ffffffff81093dc0 000000000000e160 0000000000000000 ffff88022ed4dc48 ffffffff81470325 ffff88032a5724a8 0000000000000005 ffff88033fd40000 00000008810f95d0 Call Trace: [<ffffffff814fa020>] register_cpu_notifier+0x20/0x40 [<ffffffff81093dc0>] ? register_die_notifier+0x20/0x30 [<ffffffff81470325>] nmi_setup+0x1d5/0x200 [<ffffffff8146e830>] ? event_buffer_release+0x50/0x50 [<ffffffff8146d109>] oprofile_setup+0x39/0xd0 [<ffffffff8146e890>] event_buffer_open+0x60/0xa0 [<ffffffff81119de0>] ? file_sb_list_add+0x50/0x60 [<ffffffff8111685e>] __dentry_open.clone.17+0x12e/0x330 [<ffffffff81117a2e>] nameidata_to_filp+0x4e/0x60 [<ffffffff81126ac2>] do_last+0x1b2/0x8f0 [<ffffffff81127313>] path_openat+0xd3/0x3c0 [<ffffffff81127714>] do_filp_open+0x44/0xa0 [<ffffffff81133724>] ? alloc_fd+0xe4/0x130 [<ffffffff81117b3c>] do_sys_open+0xfc/0x1d0 [<ffffffff81117c2b>] sys_open+0x1b/0x20 [<ffffffff8150763b>] system_call_fastpath+0x16/0x1b Code: 5b 41 5c 41 5d 41 5e 41 5f c9 c3 31 c0 eb ed 0f 1f 40 00 55 48 8b 07 48 89 e5 48 85 c0 74 1e 8b 56 10 3b 50 10 7e 09 eb 14 66 90 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 RIP [<ffffffff81093758>] raw_notifier_chain_register+0x18/0x40 RSP <ffff88022ed4dbb8> ---[ end trace 8dcb6b8322e14541 ]--- --- Thanks, Dyweni On Tue, 17 Jan 2012 22:40:58 -0600, Dyweni - KVM wrote: > Hi All, > > I'm not sure who this falls to, so I've included all all parties that > I > thought may be relevant. > > I'm getting the following error from my guest kernel when running > oprofile within qemu-kvm: > > general protection fault: 0000 [#1] > Modules linked in: > > Pid: 896, comm: oprofiled Not tainted 3.2.0-rc7-20120117-0605 #1 > Bochs > Bochs > EIP: 0060:[] EFLAGS: 00010086 CPU: 0 > EIP is at nmi_cpu_setup.clone.6+0x2e/0xb0 > EAX: 00000000 EBX: df89894c ECX: c0010005 EDX: 00000000 > ESI: 00000001 EDI: c168e5c0 EBP: df8addf4 ESP: df8adde4 > DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 > Process oprofiled (pid: 896, ti=df8ac000 task=df82f780 > task.ti=df8ac000) > Stack: > df898980 00000004 fffffff0 d4520880 df8ade08 c1406d4b c1618dfa > 00000000 > 00000000 df8ade14 c140464f dc792de0 df8ade28 c1405963 d4520880 > dc792de0 > 00000000 df8ade4c c1111bfa c111c7fe df84c000 df8ade44 dc77ef80 > df8adeec > Call Trace: > [] nmi_setup+0xab/0xd0 > [] oprofile_setup+0x2f/0xb0 > [] event_buffer_open+0x63/0x90 > [] __dentry_open.clone.17+0x1aa/0x2d0 > [] ? do_lookup+0x3e/0x370 > [] nameidata_to_filp+0x52/0x70 > [] ? event_buffer_release+0x40/0x40 > [] do_last+0x1e6/0x740 > [] path_openat+0x9a/0x320 > [] ? page_add_new_anon_rmap+0x74/0x80 > [] do_filp_open+0x30/0x80 > [] ? alloc_fd+0x2c/0xd0 > [] do_sys_open+0xeb/0x1c0 > [] sys_open+0x29/0x40 > [] sysenter_do_call+0x12/0x22 > Code: 57 56 53 83 ec 04 a1 90 e5 68 c1 8b 3d 44 a5 78 c1 8b 1d 8c e5 > 68 > c1 89 45 f0 8b 07 85 c0 74 1d 31 f6 8d 76 00 8b 0b 85 c9 74 08 32 > 89 43 04 89 53 08 83 c6 01 83 c3 0c 3b 37 72 e8 8b 77 04 > EIP: [] nmi_cpu_setup.clone.6+0x2e/0xb0 SS:ESP 0068:df8adde4 > ---[ end trace e22f1adcb9f592c1 ]--- > > My setup is: > > QEMU-KVM = 0.14.1-r2 > Host Linux Kernel = 3.1.6 > Guest Linux Kernel = 3.2-rc7 > OProfile = 0.9.6-r1 > > -- > Thanks, > Dyweni ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] general protection fault 2012-01-18 5:22 ` Dyweni - KVM @ 2012-02-02 12:15 ` Robert Richter 0 siblings, 0 replies; 4+ messages in thread From: Robert Richter @ 2012-02-02 12:15 UTC (permalink / raw) To: Dyweni - KVM; +Cc: Oprofile-List, Qemu Devel, KVM, Linux-Kernel Dyweni, On 17.01.12 23:22:29, Dyweni - KVM wrote: > I'm getting a very similar error when running oprofile on the > host...same version of oprofile... > > > > general protection fault: 0000 [#1] PREEMPT SMP > CPU 5 > Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi > vboxnetadp vboxnetflt vboxdrv nvidia(P) > > Pid: 1498, comm: oprofiled Tainted: P > 3.1.6-gentoo-20120114-0749 #1 MSI MS-7578/NF750-G55 (MS-7578) > RIP: 0010:[<ffffffff81093758>] [<ffffffff81093758>] > raw_notifier_chain_register+0x18/0x40 > RSP: 0018:ffff88022ed4dbb8 EFLAGS: 00010206 > RAX: 65526d6562574955 RBX: ffffffff8172b4b0 RCX: ffffffff81733ff8 > RDX: 0000000000000000 RSI: ffffffff8172b4b0 RDI: ffffffff817ae968 > RBP: ffff88022ed4dbb8 R08: ffffffff81734ef0 R09: 0000000000000000 > R10: 00003ffffffff000 R11: 0000160000000000 R12: ffffffff81734ef0 > R13: 000000000000e160 R14: ffffffff8172b520 R15: 0000000000000005 > FS: 00007f7179020700(0000) GS:ffff88033fd40000(0000) > knlGS:00000000f75a36c0 > CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > CR2: 000000000062a000 CR3: 0000000327cd8000 CR4: 00000000000006e0 > DR0: 0000000000000001 DR1: 0000000000000002 DR2: 0000000000000001 > DR3: 000000000000000a DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process oprofiled (pid: 1498, threadinfo ffff88022ed4c000, task > ffff880331635eb0) > Stack: > ffff88022ed4dbe8 ffffffff814fa020 ffff88022ed4dbe8 ffffffff81093dc0 > 000000000000e160 0000000000000000 ffff88022ed4dc48 ffffffff81470325 > ffff88032a5724a8 0000000000000005 ffff88033fd40000 00000008810f95d0 > Call Trace: > [<ffffffff814fa020>] register_cpu_notifier+0x20/0x40 > [<ffffffff81093dc0>] ? register_die_notifier+0x20/0x30 > [<ffffffff81470325>] nmi_setup+0x1d5/0x200 > [<ffffffff8146e830>] ? event_buffer_release+0x50/0x50 > [<ffffffff8146d109>] oprofile_setup+0x39/0xd0 > [<ffffffff8146e890>] event_buffer_open+0x60/0xa0 > [<ffffffff81119de0>] ? file_sb_list_add+0x50/0x60 > [<ffffffff8111685e>] __dentry_open.clone.17+0x12e/0x330 > [<ffffffff81117a2e>] nameidata_to_filp+0x4e/0x60 > [<ffffffff81126ac2>] do_last+0x1b2/0x8f0 > [<ffffffff81127313>] path_openat+0xd3/0x3c0 > [<ffffffff81127714>] do_filp_open+0x44/0xa0 > [<ffffffff81133724>] ? alloc_fd+0xe4/0x130 > [<ffffffff81117b3c>] do_sys_open+0xfc/0x1d0 > [<ffffffff81117c2b>] sys_open+0x1b/0x20 > [<ffffffff8150763b>] system_call_fastpath+0x16/0x1b > Code: 5b 41 5c 41 5d 41 5e 41 5f c9 c3 31 c0 eb ed 0f 1f 40 00 55 48 8b > 07 48 89 e5 48 85 c0 74 1e 8b 56 10 3b 50 10 7e 09 eb 14 66 90 > 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 > RIP [<ffffffff81093758>] raw_notifier_chain_register+0x18/0x40 > RSP <ffff88022ed4dbb8> > ---[ end trace 8dcb6b8322e14541 ]--- I tried to create a similar setup but can't see which instruction could trigger the gp. If you have the object files available, could you send me the obj dump of raw_notifier_chain_register() of the host setup with something like: objdump -Sdl kernel/notifier.o Is there any special in your oprofile setup? > On Tue, 17 Jan 2012 22:40:58 -0600, Dyweni - KVM wrote: > > I'm getting the following error from my guest kernel when running > > oprofile within qemu-kvm: > > > > general protection fault: 0000 [#1] > > Modules linked in: > > > > Pid: 896, comm: oprofiled Not tainted 3.2.0-rc7-20120117-0605 #1 > > Bochs > > Bochs > > EIP: 0060:[] EFLAGS: 00010086 CPU: 0 > > EIP is at nmi_cpu_setup.clone.6+0x2e/0xb0 > > EAX: 00000000 EBX: df89894c ECX: c0010005 EDX: 00000000 > > ESI: 00000001 EDI: c168e5c0 EBP: df8addf4 ESP: df8adde4 > > DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 > > Process oprofiled (pid: 896, ti=df8ac000 task=df82f780 > > task.ti=df8ac000) > > Stack: > > df898980 00000004 fffffff0 d4520880 df8ade08 c1406d4b c1618dfa > > 00000000 > > 00000000 df8ade14 c140464f dc792de0 df8ade28 c1405963 d4520880 > > dc792de0 > > 00000000 df8ade4c c1111bfa c111c7fe df84c000 df8ade44 dc77ef80 > > df8adeec > > Call Trace: > > [] nmi_setup+0xab/0xd0 > > [] oprofile_setup+0x2f/0xb0 > > [] event_buffer_open+0x63/0x90 > > [] __dentry_open.clone.17+0x1aa/0x2d0 > > [] ? do_lookup+0x3e/0x370 > > [] nameidata_to_filp+0x52/0x70 > > [] ? event_buffer_release+0x40/0x40 > > [] do_last+0x1e6/0x740 > > [] path_openat+0x9a/0x320 > > [] ? page_add_new_anon_rmap+0x74/0x80 > > [] do_filp_open+0x30/0x80 > > [] ? alloc_fd+0x2c/0xd0 > > [] do_sys_open+0xeb/0x1c0 > > [] sys_open+0x29/0x40 > > [] sysenter_do_call+0x12/0x22 > > Code: 57 56 53 83 ec 04 a1 90 e5 68 c1 8b 3d 44 a5 78 c1 8b 1d 8c e5 > > 68 > > c1 89 45 f0 8b 07 85 c0 74 1d 31 f6 8d 76 00 8b 0b 85 c9 74 08 32 > > 89 43 04 89 53 08 83 c6 01 83 c3 0c 3b 37 72 e8 8b 77 04 > > EIP: [] nmi_cpu_setup.clone.6+0x2e/0xb0 SS:ESP 0068:df8adde4 > > ---[ end trace e22f1adcb9f592c1 ]--- Running oprofile in qemu-kvm guests is not supported, though an gp should not be triggered by the oprofile driver. Do you see anything in dmesg of the host when the guest gp triggers? Same here, could you send me the objdump of nmi_cpu_setup() and nmi_setup() (guest kernel)? objdump -Sdl arch/x86/oprofile/nmi_int.o Thanks, -Robert -- Advanced Micro Devices, Inc. Operating System Research Center ------------------------------------------------------------------------------ Keep Your Developer Skills Current with LearnDevNow! The most comprehensive online learning library for Microsoft developers is just $99.99! Visual Studio, SharePoint, SQL - plus HTML5, CSS3, MVC3, Metro Style Apps, more. Free future releases when you subscribe now! http://p.sf.net/sfu/learndevnow-d2d ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: general protection fault 2012-01-18 4:40 general protection fault Dyweni - KVM 2012-01-18 5:22 ` Dyweni - KVM @ 2012-02-02 12:40 ` Avi Kivity 1 sibling, 0 replies; 4+ messages in thread From: Avi Kivity @ 2012-02-02 12:40 UTC (permalink / raw) To: n2CpHSJnr4MP; +Cc: KVM, Qemu Devel, Oprofile-List, Linux-Kernel On 01/18/2012 06:40 AM, Dyweni - KVM wrote: > Hi All, > > I'm not sure who this falls to, so I've included all all parties that > I thought may be relevant. > > I'm getting the following error from my guest kernel when running > oprofile within qemu-kvm: > kvm does not virtualize a PMU before Linux 3.3, so oprofile is not supported. The facilities for identifying the PMU to the guest are very lacking, so it's hard to make this fail gracefully. On a Linux 3.3 host, you can provide a PMU to the guest, but only using latest qemu and providing -cpu host or similar. This only works on Intel hosts for now. -- error compiling committee.c: too many arguments to function ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-02-02 12:40 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-01-18 4:40 general protection fault Dyweni - KVM 2012-01-18 5:22 ` Dyweni - KVM 2012-02-02 12:15 ` [Qemu-devel] " Robert Richter 2012-02-02 12:40 ` Avi Kivity
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox