From: Gleb Natapov <gleb@redhat.com>
To: Julian Stecklina <jsteckli@os.inf.tu-dresden.de>
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH v5] KVM: x86: Make register state after reset conform to specification
Date: Wed, 5 Dec 2012 18:02:04 +0200 [thread overview]
Message-ID: <20121205160203.GV19514@redhat.com> (raw)
In-Reply-To: <1354717579-22139-1-git-send-email-jsteckli@os.inf.tu-dresden.de>
On Wed, Dec 05, 2012 at 03:26:19PM +0100, Julian Stecklina wrote:
> VMX behaves now as SVM wrt to FPU initialization. Code has been moved to
> generic code path. General-purpose registers are now cleared on reset and
> INIT. SVM code properly initializes EDX.
>
> Signed-off-by: Julian Stecklina <jsteckli@os.inf.tu-dresden.de>
Applied to queue. Thanks.
> ---
> arch/x86/kvm/cpuid.c | 1 +
> arch/x86/kvm/svm.c | 14 ++++++--------
> arch/x86/kvm/vmx.c | 8 --------
> arch/x86/kvm/x86.c | 10 ++++++++++
> 4 files changed, 17 insertions(+), 16 deletions(-)
>
> diff --git a/arch/x86/kvm/cpuid.c b/arch/x86/kvm/cpuid.c
> index 52f6166..a20ecb5 100644
> --- a/arch/x86/kvm/cpuid.c
> +++ b/arch/x86/kvm/cpuid.c
> @@ -661,6 +661,7 @@ void kvm_cpuid(struct kvm_vcpu *vcpu, u32 *eax, u32 *ebx, u32 *ecx, u32 *edx)
> } else
> *eax = *ebx = *ecx = *edx = 0;
> }
> +EXPORT_SYMBOL_GPL(kvm_cpuid);
>
> void kvm_emulate_cpuid(struct kvm_vcpu *vcpu)
> {
> diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
> index dcb79527..d29d3cd 100644
> --- a/arch/x86/kvm/svm.c
> +++ b/arch/x86/kvm/svm.c
> @@ -20,6 +20,7 @@
> #include "mmu.h"
> #include "kvm_cache_regs.h"
> #include "x86.h"
> +#include "cpuid.h"
>
> #include <linux/module.h>
> #include <linux/mod_devicetable.h>
> @@ -1193,6 +1194,8 @@ static void init_vmcb(struct vcpu_svm *svm)
> static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
> {
> struct vcpu_svm *svm = to_svm(vcpu);
> + u32 dummy;
> + u32 eax = 1;
>
> init_vmcb(svm);
>
> @@ -1201,8 +1204,9 @@ static int svm_vcpu_reset(struct kvm_vcpu *vcpu)
> svm->vmcb->save.cs.base = svm->vcpu.arch.sipi_vector << 12;
> svm->vmcb->save.cs.selector = svm->vcpu.arch.sipi_vector << 8;
> }
> - vcpu->arch.regs_avail = ~0;
> - vcpu->arch.regs_dirty = ~0;
> +
> + kvm_cpuid(vcpu, &eax, &dummy, &dummy, &dummy);
> + kvm_register_write(vcpu, VCPU_REGS_RDX, eax);
>
> return 0;
> }
> @@ -1259,10 +1263,6 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
> svm->asid_generation = 0;
> init_vmcb(svm);
>
> - err = fx_init(&svm->vcpu);
> - if (err)
> - goto free_page4;
> -
> svm->vcpu.arch.apic_base = 0xfee00000 | MSR_IA32_APICBASE_ENABLE;
> if (kvm_vcpu_is_bsp(&svm->vcpu))
> svm->vcpu.arch.apic_base |= MSR_IA32_APICBASE_BSP;
> @@ -1271,8 +1271,6 @@ static struct kvm_vcpu *svm_create_vcpu(struct kvm *kvm, unsigned int id)
>
> return &svm->vcpu;
>
> -free_page4:
> - __free_page(hsave_page);
> free_page3:
> __free_pages(nested_msrpm_pages, MSRPM_ALLOC_ORDER);
> free_page2:
> diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
> index 2fd2046..6adbad6 100644
> --- a/arch/x86/kvm/vmx.c
> +++ b/arch/x86/kvm/vmx.c
> @@ -3934,8 +3934,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
> u64 msr;
> int ret;
>
> - vcpu->arch.regs_avail = ~((1 << VCPU_REGS_RIP) | (1 << VCPU_REGS_RSP));
> -
> vmx->rmode.vm86_active = 0;
>
> vmx->soft_vnmi_blocked = 0;
> @@ -3947,10 +3945,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
> msr |= MSR_IA32_APICBASE_BSP;
> kvm_set_apic_base(&vmx->vcpu, msr);
>
> - ret = fx_init(&vmx->vcpu);
> - if (ret != 0)
> - goto out;
> -
> vmx_segment_cache_clear(vmx);
>
> seg_setup(VCPU_SREG_CS);
> @@ -3991,7 +3985,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
> kvm_rip_write(vcpu, 0xfff0);
> else
> kvm_rip_write(vcpu, 0);
> - kvm_register_write(vcpu, VCPU_REGS_RSP, 0);
>
> vmcs_writel(GUEST_GDTR_BASE, 0);
> vmcs_write32(GUEST_GDTR_LIMIT, 0xffff);
> @@ -4041,7 +4034,6 @@ static int vmx_vcpu_reset(struct kvm_vcpu *vcpu)
> /* HACK: Don't enable emulation on guest boot/reset */
> vmx->emulation_required = 0;
>
> -out:
> return ret;
> }
>
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 3bdaf29..57c76e8 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -6461,6 +6461,10 @@ static int kvm_vcpu_reset(struct kvm_vcpu *vcpu)
>
> kvm_pmu_reset(vcpu);
>
> + memset(vcpu->arch.regs, 0, sizeof(vcpu->arch.regs));
> + vcpu->arch.regs_avail = ~0;
> + vcpu->arch.regs_dirty = ~0;
> +
> return kvm_x86_ops->vcpu_reset(vcpu);
> }
>
> @@ -6629,11 +6633,17 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
> if (!zalloc_cpumask_var(&vcpu->arch.wbinvd_dirty_mask, GFP_KERNEL))
> goto fail_free_mce_banks;
>
> + r = fx_init(vcpu);
> + if (r)
> + goto fail_free_wbinvd_dirty_mask;
> +
> vcpu->arch.ia32_tsc_adjust_msr = 0x0;
> kvm_async_pf_hash_reset(vcpu);
> kvm_pmu_init(vcpu);
>
> return 0;
> +fail_free_wbinvd_dirty_mask:
> + free_cpumask_var(vcpu->arch.wbinvd_dirty_mask);
> fail_free_mce_banks:
> kfree(vcpu->arch.mce_banks);
> fail_free_lapic:
> --
> 1.7.11.7
--
Gleb.
next prev parent reply other threads:[~2012-12-05 16:02 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-29 14:07 KVM VMX: register state after reset violates spec Julian Stecklina
2012-11-29 14:38 ` [PATCH] KVM VMX: Make register state after reset conform to specification Julian Stecklina
2012-11-29 14:55 ` Julian Stecklina
2012-12-02 13:38 ` KVM VMX: register state after reset violates spec Gleb Natapov
2012-12-03 12:05 ` Julian Stecklina
2012-12-03 13:46 ` [PATCH v2] KVM: x86: Make register state after reset conform to specification Julian Stecklina
2012-12-04 9:48 ` Gleb Natapov
2012-12-04 12:13 ` [PATCH v3] " Julian Stecklina
2012-12-05 10:50 ` Gleb Natapov
2012-12-05 12:00 ` [PATCH v4] " Julian Stecklina
2012-12-05 13:27 ` Gleb Natapov
2012-12-05 14:26 ` [PATCH v5] " Julian Stecklina
2012-12-05 16:02 ` Gleb Natapov [this message]
2012-12-05 14:27 ` [PATCH v4] " Julian Stecklina
2012-12-03 13:49 ` KVM VMX: register state after reset violates spec Julian Stecklina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121205160203.GV19514@redhat.com \
--to=gleb@redhat.com \
--cc=jsteckli@os.inf.tu-dresden.de \
--cc=kvm@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).