Re: use perf to get LLC-loads count in Guest

Re: use perf to get LLC-loads count in Guest

[Gleb Natapov]

On Wed, Dec 19, 2012 at 02:08:07AM +0800, Storm Wang wrote:
> Hello guys
> 
> here I have a problem, when I used perf in Guest, the count of LLC-loads
> usually returns 0. LLC-loads was a hardware cache event, besides the
> setting of general PMU MSR, need to set MSR_OFFCORE_RSP_0 as well, in perf,
> it would be the extra_reg and extra_config in "hw_perf_event". I add some
> debuginfo in function "read_pmc" and found that when measuring LLC-loads,
> pmc->perf_event->hw.extra_reg is 0x0, and the counter's number was always
> the same. I think this is the reason, but I can't find when and where the
> value changed.
> 
> Anybody has some idea for this?
> 
Currently counters that need extra regs are not supported by KVM PMU
emulation.

--
			Gleb.

Re: use perf to get LLC-loads count in Guest

[Storm Wang]

>Currently counters that need extra regs are not supported by KVM PMU
>emulation
Thank you, Gleb. But actually only 1% chance, I got the LLC-loads
count nonzero, I really have no idea why this happend.

On Wed, Dec 19, 2012 at 8:49 PM, Gleb Natapov <gleb@redhat.com> wrote:
> On Wed, Dec 19, 2012 at 02:08:07AM +0800, Storm Wang wrote:
>> Hello guys
>>
>> here I have a problem, when I used perf in Guest, the count of LLC-loads
>> usually returns 0. LLC-loads was a hardware cache event, besides the
>> setting of general PMU MSR, need to set MSR_OFFCORE_RSP_0 as well, in perf,
>> it would be the extra_reg and extra_config in "hw_perf_event". I add some
>> debuginfo in function "read_pmc" and found that when measuring LLC-loads,
>> pmc->perf_event->hw.extra_reg is 0x0, and the counter's number was always
>> the same. I think this is the reason, but I can't find when and where the
>> value changed.
>>
>> Anybody has some idea for this?
>>
> Currently counters that need extra regs are not supported by KVM PMU
> emulation.
>
> --
>                         Gleb.

Re: use perf to get LLC-loads count in Guest

[Gleb Natapov]

On Wed, Dec 19, 2012 at 11:17:53PM +0800, Storm Wang wrote:
> >Currently counters that need extra regs are not supported by KVM PMU
> >emulation
> Thank you, Gleb. But actually only 1% chance, I got the LLC-loads
> count nonzero, I really have no idea why this happend.
> 
May be without configuring MSR_OFFCORE_RSP_0 the counter still counts
something.

> On Wed, Dec 19, 2012 at 8:49 PM, Gleb Natapov <gleb@redhat.com> wrote:
> > On Wed, Dec 19, 2012 at 02:08:07AM +0800, Storm Wang wrote:
> >> Hello guys
> >>
> >> here I have a problem, when I used perf in Guest, the count of LLC-loads
> >> usually returns 0. LLC-loads was a hardware cache event, besides the
> >> setting of general PMU MSR, need to set MSR_OFFCORE_RSP_0 as well, in perf,
> >> it would be the extra_reg and extra_config in "hw_perf_event". I add some
> >> debuginfo in function "read_pmc" and found that when measuring LLC-loads,
> >> pmc->perf_event->hw.extra_reg is 0x0, and the counter's number was always
> >> the same. I think this is the reason, but I can't find when and where the
> >> value changed.
> >>
> >> Anybody has some idea for this?
> >>
> > Currently counters that need extra regs are not supported by KVM PMU
> > emulation.
> >
> > --
> >                         Gleb.

--
			Gleb.

use perf to get LLC-loads count in Guest

[Storm Wang]

Hello,

I have a problem when I used perf in Guest, the count of LLC-loads
almost always returns 0.

LLC-loads was a hardware cache event, besides the setting of general
PMU MSR, need to set MSR_OFFCORE_RSP_0 as well, in perf, it would be
the extra_reg and extra_config in "hw_perf_event". I add some
debuginfo in function "read_pmc" and found that when measuring
LLC-loads, pmc->perf_event->hw.extra_reg is 0x0, and the counter's
number was always the same. I think this is the reason, but I can't
find when and where the value changed.

Anybody has some idea for this?

my environment:
CPU was Xeon E5620, 2.4GHz
centos 6.3 for both Host and Guest and "-cpu host" option was added
when start qemu.
I tried both the original kernel of centos6.3 and the latest stable
version 3.7.1

Thanks