* [PATCH 1/8] KVM: x86 emulator: add support for writing back the source operand
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
@ 2013-02-09 9:31 ` Avi Kivity
2013-02-10 11:56 ` Gleb Natapov
2013-02-09 9:31 ` [PATCH 2/8] KVM: x86 emulator: decode extended accumulator explicity Avi Kivity
` (6 subsequent siblings)
7 siblings, 1 reply; 13+ messages in thread
From: Avi Kivity @ 2013-02-09 9:31 UTC (permalink / raw)
To: Gleb Natapov, Marcelo Tosatti; +Cc: kvm
Some instructions write back the source operand, not just the destination.
Add support for doing this via the decode flags.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 47 ++++++++++++++++++++++++++---------------------
1 file changed, 26 insertions(+), 21 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 2b11318..18c86b5 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -152,6 +152,7 @@
#define Avx ((u64)1 << 43) /* Advanced Vector Extensions */
#define Fastop ((u64)1 << 44) /* Use opcode::u.fastop */
#define NoWrite ((u64)1 << 45) /* No writeback */
+#define SrcWrite ((u64)1 << 46) /* Write back src operand */
#define X2(x...) x, x
#define X3(x...) X2(x), x
@@ -1708,45 +1709,42 @@ static void write_register_operand(struct operand *op)
}
}
-static int writeback(struct x86_emulate_ctxt *ctxt)
+static int writeback(struct x86_emulate_ctxt *ctxt, struct operand *op)
{
int rc;
- if (ctxt->d & NoWrite)
- return X86EMUL_CONTINUE;
-
- switch (ctxt->dst.type) {
+ switch (op->type) {
case OP_REG:
- write_register_operand(&ctxt->dst);
+ write_register_operand(op);
break;
case OP_MEM:
if (ctxt->lock_prefix)
rc = segmented_cmpxchg(ctxt,
- ctxt->dst.addr.mem,
- &ctxt->dst.orig_val,
- &ctxt->dst.val,
- ctxt->dst.bytes);
+ op->addr.mem,
+ &op->orig_val,
+ &op->val,
+ op->bytes);
else
rc = segmented_write(ctxt,
- ctxt->dst.addr.mem,
- &ctxt->dst.val,
- ctxt->dst.bytes);
+ op->addr.mem,
+ &op->val,
+ op->bytes);
if (rc != X86EMUL_CONTINUE)
return rc;
break;
case OP_MEM_STR:
rc = segmented_write(ctxt,
- ctxt->dst.addr.mem,
- ctxt->dst.data,
- ctxt->dst.bytes * ctxt->dst.count);
+ op->addr.mem,
+ op->data,
+ op->bytes * op->count);
if (rc != X86EMUL_CONTINUE)
return rc;
break;
case OP_XMM:
- write_sse_reg(ctxt, &ctxt->dst.vec_val, ctxt->dst.addr.xmm);
+ write_sse_reg(ctxt, &op->vec_val, op->addr.xmm);
break;
case OP_MM:
- write_mmx_reg(ctxt, &ctxt->dst.mm_val, ctxt->dst.addr.mm);
+ write_mmx_reg(ctxt, &op->mm_val, op->addr.mm);
break;
case OP_NONE:
/* no writeback */
@@ -4717,9 +4715,16 @@ special_insn:
goto done;
writeback:
- rc = writeback(ctxt);
- if (rc != X86EMUL_CONTINUE)
- goto done;
+ if (!(ctxt->d & NoWrite)) {
+ rc = writeback(ctxt, &ctxt->dst);
+ if (rc != X86EMUL_CONTINUE)
+ goto done;
+ }
+ if (ctxt->d & SrcWrite) {
+ rc = writeback(ctxt, &ctxt->src);
+ if (rc != X86EMUL_CONTINUE)
+ goto done;
+ }
/*
* restore dst type in case the decoding will be reused
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 1/8] KVM: x86 emulator: add support for writing back the source operand
2013-02-09 9:31 ` [PATCH 1/8] KVM: x86 emulator: add support for writing back the source operand Avi Kivity
@ 2013-02-10 11:56 ` Gleb Natapov
0 siblings, 0 replies; 13+ messages in thread
From: Gleb Natapov @ 2013-02-10 11:56 UTC (permalink / raw)
To: Avi Kivity; +Cc: Marcelo Tosatti, kvm
On Sat, Feb 09, 2013 at 11:31:44AM +0200, Avi Kivity wrote:
> Some instructions write back the source operand, not just the destination.
> Add support for doing this via the decode flags.
>
We cannot really write back to memory operands. I feel it's deceiving to make
the code look like we can.
> Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
> ---
> arch/x86/kvm/emulate.c | 47 ++++++++++++++++++++++++++---------------------
> 1 file changed, 26 insertions(+), 21 deletions(-)
>
> diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
> index 2b11318..18c86b5 100644
> --- a/arch/x86/kvm/emulate.c
> +++ b/arch/x86/kvm/emulate.c
> @@ -152,6 +152,7 @@
> #define Avx ((u64)1 << 43) /* Advanced Vector Extensions */
> #define Fastop ((u64)1 << 44) /* Use opcode::u.fastop */
> #define NoWrite ((u64)1 << 45) /* No writeback */
> +#define SrcWrite ((u64)1 << 46) /* Write back src operand */
>
> #define X2(x...) x, x
> #define X3(x...) X2(x), x
> @@ -1708,45 +1709,42 @@ static void write_register_operand(struct operand *op)
> }
> }
>
> -static int writeback(struct x86_emulate_ctxt *ctxt)
> +static int writeback(struct x86_emulate_ctxt *ctxt, struct operand *op)
> {
> int rc;
>
> - if (ctxt->d & NoWrite)
> - return X86EMUL_CONTINUE;
> -
> - switch (ctxt->dst.type) {
> + switch (op->type) {
> case OP_REG:
> - write_register_operand(&ctxt->dst);
> + write_register_operand(op);
> break;
> case OP_MEM:
> if (ctxt->lock_prefix)
> rc = segmented_cmpxchg(ctxt,
> - ctxt->dst.addr.mem,
> - &ctxt->dst.orig_val,
> - &ctxt->dst.val,
> - ctxt->dst.bytes);
> + op->addr.mem,
> + &op->orig_val,
> + &op->val,
> + op->bytes);
> else
> rc = segmented_write(ctxt,
> - ctxt->dst.addr.mem,
> - &ctxt->dst.val,
> - ctxt->dst.bytes);
> + op->addr.mem,
> + &op->val,
> + op->bytes);
> if (rc != X86EMUL_CONTINUE)
> return rc;
> break;
> case OP_MEM_STR:
> rc = segmented_write(ctxt,
> - ctxt->dst.addr.mem,
> - ctxt->dst.data,
> - ctxt->dst.bytes * ctxt->dst.count);
> + op->addr.mem,
> + op->data,
> + op->bytes * op->count);
> if (rc != X86EMUL_CONTINUE)
> return rc;
> break;
> case OP_XMM:
> - write_sse_reg(ctxt, &ctxt->dst.vec_val, ctxt->dst.addr.xmm);
> + write_sse_reg(ctxt, &op->vec_val, op->addr.xmm);
> break;
> case OP_MM:
> - write_mmx_reg(ctxt, &ctxt->dst.mm_val, ctxt->dst.addr.mm);
> + write_mmx_reg(ctxt, &op->mm_val, op->addr.mm);
> break;
> case OP_NONE:
> /* no writeback */
> @@ -4717,9 +4715,16 @@ special_insn:
> goto done;
>
> writeback:
> - rc = writeback(ctxt);
> - if (rc != X86EMUL_CONTINUE)
> - goto done;
> + if (!(ctxt->d & NoWrite)) {
> + rc = writeback(ctxt, &ctxt->dst);
> + if (rc != X86EMUL_CONTINUE)
> + goto done;
> + }
> + if (ctxt->d & SrcWrite) {
> + rc = writeback(ctxt, &ctxt->src);
> + if (rc != X86EMUL_CONTINUE)
> + goto done;
> + }
>
> /*
> * restore dst type in case the decoding will be reused
> --
> 1.8.1.2
--
Gleb.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 2/8] KVM: x86 emulator: decode extended accumulator explicity
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
2013-02-09 9:31 ` [PATCH 1/8] KVM: x86 emulator: add support for writing back the source operand Avi Kivity
@ 2013-02-09 9:31 ` Avi Kivity
2013-02-10 12:19 ` Gleb Natapov
2013-02-09 9:31 ` [PATCH 3/8] KVM: x86 emulator: switch MUL/DIV to DstXacc Avi Kivity
` (5 subsequent siblings)
7 siblings, 1 reply; 13+ messages in thread
From: Avi Kivity @ 2013-02-09 9:31 UTC (permalink / raw)
To: Gleb Natapov, Marcelo Tosatti; +Cc: kvm
Single-operand MUL and DIV access an extended accumulator: AX for byte
instructions, and DX:AX, EDX:EAX, or RDX:RAX for larger-sized instructions.
Add support for fetching the extended accumulator.
In order not to change things too much, RDX is loaded into Src2, which is
already loaded by fastop(). This avoids increasing register pressure on
i386.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 18c86b5..aa8516e 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -60,6 +60,8 @@
#define OpGS 25ull /* GS */
#define OpMem8 26ull /* 8-bit zero extended memory operand */
#define OpImm64 27ull /* Sign extended 16/32/64-bit immediate */
+#define OpAccLo 29ull /* Low part of extended acc (AX/AX/EAX/RAX) */
+#define OpAccHi 30ull /* High part of extended acc (-/DX/EDX/RDX) */
#define OpBits 5 /* Width of operand field */
#define OpMask ((1ull << OpBits) - 1)
@@ -85,6 +87,7 @@
#define DstMem64 (OpMem64 << DstShift)
#define DstImmUByte (OpImmUByte << DstShift)
#define DstDX (OpDX << DstShift)
+#define DstAccLo (OpAccLo << DstShift)
#define DstMask (OpMask << DstShift)
/* Source operand type. */
#define SrcShift 6
@@ -106,6 +109,7 @@
#define SrcImm64 (OpImm64 << SrcShift)
#define SrcDX (OpDX << SrcShift)
#define SrcMem8 (OpMem8 << SrcShift)
+#define SrcAccHi (OpAccHi << SrcShift)
#define SrcMask (OpMask << SrcShift)
#define BitOp (1<<11)
#define MemAbs (1<<12) /* Memory operand is absolute displacement */
@@ -154,6 +158,8 @@
#define NoWrite ((u64)1 << 45) /* No writeback */
#define SrcWrite ((u64)1 << 46) /* Write back src operand */
+#define DstXacc (DstAccLo | SrcAccHi | SrcWrite)
+
#define X2(x...) x, x
#define X3(x...) X2(x), x
#define X4(x...) X2(x), X2(x)
@@ -4129,6 +4135,22 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
fetch_register_operand(op);
op->orig_val = op->val;
break;
+ case OpAccLo:
+ op->type = OP_REG;
+ op->bytes = (ctxt->d & ByteOp) ? 2 : ctxt->op_bytes;
+ op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RAX);
+ fetch_register_operand(op);
+ op->orig_val = op->val;
+ break;
+ case OpAccHi:
+ if (ctxt->d & ByteOp)
+ break;
+ op->type = OP_REG;
+ op->bytes = ctxt->op_bytes;
+ op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RDX);
+ fetch_register_operand(op);
+ op->orig_val = op->val;
+ break;
case OpDI:
op->type = OP_MEM;
op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 2/8] KVM: x86 emulator: decode extended accumulator explicity
2013-02-09 9:31 ` [PATCH 2/8] KVM: x86 emulator: decode extended accumulator explicity Avi Kivity
@ 2013-02-10 12:19 ` Gleb Natapov
2013-05-20 12:32 ` Gleb Natapov
0 siblings, 1 reply; 13+ messages in thread
From: Gleb Natapov @ 2013-02-10 12:19 UTC (permalink / raw)
To: Avi Kivity; +Cc: Marcelo Tosatti, kvm
On Sat, Feb 09, 2013 at 11:31:45AM +0200, Avi Kivity wrote:
> Single-operand MUL and DIV access an extended accumulator: AX for byte
> instructions, and DX:AX, EDX:EAX, or RDX:RAX for larger-sized instructions.
> Add support for fetching the extended accumulator.
>
Where this "extended accumulator" definition is coming from? Spec just
says that two registers are used for a result depending on the operand
size.
> In order not to change things too much, RDX is loaded into Src2, which is
> already loaded by fastop(). This avoids increasing register pressure on
> i386.
>
> Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
> ---
> arch/x86/kvm/emulate.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
> index 18c86b5..aa8516e 100644
> --- a/arch/x86/kvm/emulate.c
> +++ b/arch/x86/kvm/emulate.c
> @@ -60,6 +60,8 @@
> #define OpGS 25ull /* GS */
> #define OpMem8 26ull /* 8-bit zero extended memory operand */
> #define OpImm64 27ull /* Sign extended 16/32/64-bit immediate */
> +#define OpAccLo 29ull /* Low part of extended acc (AX/AX/EAX/RAX) */
> +#define OpAccHi 30ull /* High part of extended acc (-/DX/EDX/RDX) */
>
> #define OpBits 5 /* Width of operand field */
> #define OpMask ((1ull << OpBits) - 1)
> @@ -85,6 +87,7 @@
> #define DstMem64 (OpMem64 << DstShift)
> #define DstImmUByte (OpImmUByte << DstShift)
> #define DstDX (OpDX << DstShift)
> +#define DstAccLo (OpAccLo << DstShift)
> #define DstMask (OpMask << DstShift)
> /* Source operand type. */
> #define SrcShift 6
> @@ -106,6 +109,7 @@
> #define SrcImm64 (OpImm64 << SrcShift)
> #define SrcDX (OpDX << SrcShift)
> #define SrcMem8 (OpMem8 << SrcShift)
> +#define SrcAccHi (OpAccHi << SrcShift)
> #define SrcMask (OpMask << SrcShift)
> #define BitOp (1<<11)
> #define MemAbs (1<<12) /* Memory operand is absolute displacement */
> @@ -154,6 +158,8 @@
> #define NoWrite ((u64)1 << 45) /* No writeback */
> #define SrcWrite ((u64)1 << 46) /* Write back src operand */
>
> +#define DstXacc (DstAccLo | SrcAccHi | SrcWrite)
> +
> #define X2(x...) x, x
> #define X3(x...) X2(x), x
> #define X4(x...) X2(x), X2(x)
> @@ -4129,6 +4135,22 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
> fetch_register_operand(op);
> op->orig_val = op->val;
> break;
> + case OpAccLo:
> + op->type = OP_REG;
> + op->bytes = (ctxt->d & ByteOp) ? 2 : ctxt->op_bytes;
> + op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RAX);
> + fetch_register_operand(op);
> + op->orig_val = op->val;
> + break;
> + case OpAccHi:
> + if (ctxt->d & ByteOp)
> + break;
Why would we set OpAccHi if ByteOp is set in decode tables in the first
place?
> + op->type = OP_REG;
> + op->bytes = ctxt->op_bytes;
> + op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RDX);
> + fetch_register_operand(op);
> + op->orig_val = op->val;
> + break;
> case OpDI:
> op->type = OP_MEM;
> op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
> --
> 1.8.1.2
--
Gleb.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [PATCH 2/8] KVM: x86 emulator: decode extended accumulator explicity
2013-02-10 12:19 ` Gleb Natapov
@ 2013-05-20 12:32 ` Gleb Natapov
0 siblings, 0 replies; 13+ messages in thread
From: Gleb Natapov @ 2013-05-20 12:32 UTC (permalink / raw)
To: Avi Kivity; +Cc: Marcelo Tosatti, kvm
On Sun, Feb 10, 2013 at 02:19:29PM +0200, Gleb Natapov wrote:
> On Sat, Feb 09, 2013 at 11:31:45AM +0200, Avi Kivity wrote:
> > Single-operand MUL and DIV access an extended accumulator: AX for byte
> > instructions, and DX:AX, EDX:EAX, or RDX:RAX for larger-sized instructions.
> > Add support for fetching the extended accumulator.
> >
> Where this "extended accumulator" definition is coming from? Spec just
> says that two registers are used for a result depending on the operand
> size.
>
> > In order not to change things too much, RDX is loaded into Src2, which is
> > already loaded by fastop(). This avoids increasing register pressure on
> > i386.
> >
> > Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
> > ---
> > arch/x86/kvm/emulate.c | 22 ++++++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> > diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
> > index 18c86b5..aa8516e 100644
> > --- a/arch/x86/kvm/emulate.c
> > +++ b/arch/x86/kvm/emulate.c
> > @@ -60,6 +60,8 @@
> > #define OpGS 25ull /* GS */
> > #define OpMem8 26ull /* 8-bit zero extended memory operand */
> > #define OpImm64 27ull /* Sign extended 16/32/64-bit immediate */
> > +#define OpAccLo 29ull /* Low part of extended acc (AX/AX/EAX/RAX) */
> > +#define OpAccHi 30ull /* High part of extended acc (-/DX/EDX/RDX) */
> >
> > #define OpBits 5 /* Width of operand field */
> > #define OpMask ((1ull << OpBits) - 1)
> > @@ -85,6 +87,7 @@
> > #define DstMem64 (OpMem64 << DstShift)
> > #define DstImmUByte (OpImmUByte << DstShift)
> > #define DstDX (OpDX << DstShift)
> > +#define DstAccLo (OpAccLo << DstShift)
> > #define DstMask (OpMask << DstShift)
> > /* Source operand type. */
> > #define SrcShift 6
> > @@ -106,6 +109,7 @@
> > #define SrcImm64 (OpImm64 << SrcShift)
> > #define SrcDX (OpDX << SrcShift)
> > #define SrcMem8 (OpMem8 << SrcShift)
> > +#define SrcAccHi (OpAccHi << SrcShift)
> > #define SrcMask (OpMask << SrcShift)
> > #define BitOp (1<<11)
> > #define MemAbs (1<<12) /* Memory operand is absolute displacement */
> > @@ -154,6 +158,8 @@
> > #define NoWrite ((u64)1 << 45) /* No writeback */
> > #define SrcWrite ((u64)1 << 46) /* Write back src operand */
> >
> > +#define DstXacc (DstAccLo | SrcAccHi | SrcWrite)
> > +
> > #define X2(x...) x, x
> > #define X3(x...) X2(x), x
> > #define X4(x...) X2(x), X2(x)
> > @@ -4129,6 +4135,22 @@ static int decode_operand(struct x86_emulate_ctxt *ctxt, struct operand *op,
> > fetch_register_operand(op);
> > op->orig_val = op->val;
> > break;
> > + case OpAccLo:
> > + op->type = OP_REG;
> > + op->bytes = (ctxt->d & ByteOp) ? 2 : ctxt->op_bytes;
> > + op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RAX);
> > + fetch_register_operand(op);
> > + op->orig_val = op->val;
> > + break;
> > + case OpAccHi:
> > + if (ctxt->d & ByteOp)
> > + break;
> Why would we set OpAccHi if ByteOp is set in decode tables in the first
> place?
>
Was trying to create decode tables so that this one will not be
necessary, but it will require to have two group3 arrays, one for ByteOp
and another for non ByteOp. Not nice.
But what I noticed is that current code writes into NULL pointer when
ByteOp mul/div is emulated. It happens because src operand stays
undecoded, but since SrcWrite is set for the instruction src operand is
written back anyway. Since it is undecoded op->type is zero and
op->addr.reg is NULL and type zero happens to be OP_REG, so
write_register_operand() is called with op->addr.reg == NULL.
We should do op->type = OP_NONE if !ByteOp here.
Will fix and apply, try to come up with a way to express it via decode
tables on top.
> > + op->type = OP_REG;
> > + op->bytes = ctxt->op_bytes;
> > + op->addr.reg = reg_rmw(ctxt, VCPU_REGS_RDX);
> > + fetch_register_operand(op);
> > + op->orig_val = op->val;
> > + break;
> > case OpDI:
> > op->type = OP_MEM;
> > op->bytes = (ctxt->d & ByteOp) ? 1 : ctxt->op_bytes;
> > --
> > 1.8.1.2
>
> --
> Gleb.
> --
> To unsubscribe from this list: send the line "unsubscribe kvm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Gleb.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 3/8] KVM: x86 emulator: switch MUL/DIV to DstXacc
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
2013-02-09 9:31 ` [PATCH 1/8] KVM: x86 emulator: add support for writing back the source operand Avi Kivity
2013-02-09 9:31 ` [PATCH 2/8] KVM: x86 emulator: decode extended accumulator explicity Avi Kivity
@ 2013-02-09 9:31 ` Avi Kivity
2013-02-09 9:31 ` [PATCH 4/8] KVM: x86 emulator: Switch fastop src operand to RDX Avi Kivity
` (4 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Avi Kivity @ 2013-02-09 9:31 UTC (permalink / raw)
To: Gleb Natapov, Marcelo Tosatti; +Cc: kvm
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index aa8516e..d51f6f4 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -139,6 +139,7 @@
/* Source 2 operand type */
#define Src2Shift (30)
#define Src2None (OpNone << Src2Shift)
+#define Src2Mem (OpMem << Src2Shift)
#define Src2CL (OpCL << Src2Shift)
#define Src2ImmByte (OpImmByte << Src2Shift)
#define Src2One (OpOne << Src2Shift)
@@ -542,8 +543,8 @@ FOP_END;
#define __emulate_1op_rax_rdx(ctxt, _op, _suffix, _ex) \
do { \
unsigned long _tmp; \
- ulong *rax = reg_rmw((ctxt), VCPU_REGS_RAX); \
- ulong *rdx = reg_rmw((ctxt), VCPU_REGS_RDX); \
+ ulong *rax = &ctxt->dst.val; \
+ ulong *rdx = &ctxt->src.val; \
\
__asm__ __volatile__ ( \
_PRE_EFLAGS("0", "5", "1") \
@@ -558,7 +559,7 @@ FOP_END;
_ASM_EXTABLE(1b, 3b) \
: "=m" ((ctxt)->eflags), "=&r" (_tmp), \
"+a" (*rax), "+d" (*rdx), "+qm"(_ex) \
- : "i" (EFLAGS_MASK), "m" ((ctxt)->src.val)); \
+ : "i" (EFLAGS_MASK), "m" ((ctxt)->src2.val)); \
} while (0)
/* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */
@@ -3701,10 +3702,10 @@ static const struct opcode group3[] = {
F(DstMem | SrcImm | NoWrite, em_test),
F(DstMem | SrcNone | Lock, em_not),
F(DstMem | SrcNone | Lock, em_neg),
- I(SrcMem, em_mul_ex),
- I(SrcMem, em_imul_ex),
- I(SrcMem, em_div_ex),
- I(SrcMem, em_idiv_ex),
+ I(DstXacc | Src2Mem, em_mul_ex),
+ I(DstXacc | Src2Mem, em_imul_ex),
+ I(DstXacc | Src2Mem, em_div_ex),
+ I(DstXacc | Src2Mem, em_idiv_ex),
};
static const struct opcode group4[] = {
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 4/8] KVM: x86 emulator: Switch fastop src operand to RDX
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
` (2 preceding siblings ...)
2013-02-09 9:31 ` [PATCH 3/8] KVM: x86 emulator: switch MUL/DIV to DstXacc Avi Kivity
@ 2013-02-09 9:31 ` Avi Kivity
2013-02-09 9:31 ` [PATCH 5/8] KVM: x86 emulator: convert single-operand MUL/IMUL to fastop Avi Kivity
` (3 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Avi Kivity @ 2013-02-09 9:31 UTC (permalink / raw)
To: Gleb Natapov, Marcelo Tosatti; +Cc: kvm
This makes OpAccHi useful.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index d51f6f4..fe91e70 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -176,8 +176,8 @@
/*
* fastop functions have a special calling convention:
*
- * dst: [rdx]:rax (in/out)
- * src: rbx (in/out)
+ * dst: rax (in/out)
+ * src: rdx (in/out)
* src2: rcx (in)
* flags: rflags (in/out)
*
@@ -482,19 +482,19 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
#define FASTOP2(op) \
FOP_START(op) \
- FOP2E(op##b, al, bl) \
- FOP2E(op##w, ax, bx) \
- FOP2E(op##l, eax, ebx) \
- ON64(FOP2E(op##q, rax, rbx)) \
+ FOP2E(op##b, al, dl) \
+ FOP2E(op##w, ax, dx) \
+ FOP2E(op##l, eax, edx) \
+ ON64(FOP2E(op##q, rax, rdx)) \
FOP_END
/* 2 operand, word only */
#define FASTOP2W(op) \
FOP_START(op) \
FOPNOP() \
- FOP2E(op##w, ax, bx) \
- FOP2E(op##l, eax, ebx) \
- ON64(FOP2E(op##q, rax, rbx)) \
+ FOP2E(op##w, ax, dx) \
+ FOP2E(op##l, eax, edx) \
+ ON64(FOP2E(op##q, rax, rdx)) \
FOP_END
/* 2 operand, src is CL */
@@ -513,9 +513,9 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
#define FASTOP3WCL(op) \
FOP_START(op) \
FOPNOP() \
- FOP3E(op##w, ax, bx, cl) \
- FOP3E(op##l, eax, ebx, cl) \
- ON64(FOP3E(op##q, rax, rbx, cl)) \
+ FOP3E(op##w, ax, dx, cl) \
+ FOP3E(op##l, eax, edx, cl) \
+ ON64(FOP3E(op##q, rax, rdx, cl)) \
FOP_END
/* Special case for SETcc - 1 instruction per cc */
@@ -4521,7 +4521,7 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *))
ulong flags = (ctxt->eflags & EFLAGS_MASK) | X86_EFLAGS_IF;
fop += __ffs(ctxt->dst.bytes) * FASTOP_SIZE;
asm("push %[flags]; popf; call *%[fastop]; pushf; pop %[flags]\n"
- : "+a"(ctxt->dst.val), "+b"(ctxt->src.val), [flags]"+D"(flags)
+ : "+a"(ctxt->dst.val), "+d"(ctxt->src.val), [flags]"+D"(flags)
: "c"(ctxt->src2.val), [fastop]"S"(fop));
ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK);
return X86EMUL_CONTINUE;
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 5/8] KVM: x86 emulator: convert single-operand MUL/IMUL to fastop
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
` (3 preceding siblings ...)
2013-02-09 9:31 ` [PATCH 4/8] KVM: x86 emulator: Switch fastop src operand to RDX Avi Kivity
@ 2013-02-09 9:31 ` Avi Kivity
2013-02-09 9:31 ` [PATCH 6/8] KVM: x86 emulator: convert DIV/IDIV " Avi Kivity
` (2 subsequent siblings)
7 siblings, 0 replies; 13+ messages in thread
From: Avi Kivity @ 2013-02-09 9:31 UTC (permalink / raw)
To: Gleb Natapov, Marcelo Tosatti; +Cc: kvm
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 35 ++++++++++++++++-------------------
1 file changed, 16 insertions(+), 19 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index fe91e70..0f0c15e 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -477,6 +477,15 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
ON64(FOP1E(op##q, rax)) \
FOP_END
+/* 1-operand, using src2 (for MUL/DIV r/m) */
+#define FASTOP1SRC2(op, name) \
+ FOP_START(name) \
+ FOP1E(op, cl) \
+ FOP1E(op, cx) \
+ FOP1E(op, ecx) \
+ ON64(FOP1E(op, rcx)) \
+ FOP_END
+
#define FOP2E(op, dst, src) \
FOP_ALIGN #op " %" #src ", %" #dst " \n\t" FOP_RET
@@ -990,6 +999,9 @@ FASTOP2(xor);
FASTOP2(cmp);
FASTOP2(test);
+FASTOP1SRC2(mul, mul_ex);
+FASTOP1SRC2(imul, imul_ex);
+
FASTOP3WCL(shld);
FASTOP3WCL(shrd);
@@ -2104,22 +2116,6 @@ static int em_jmp_far(struct x86_emulate_ctxt *ctxt)
return X86EMUL_CONTINUE;
}
-static int em_mul_ex(struct x86_emulate_ctxt *ctxt)
-{
- u8 ex = 0;
-
- emulate_1op_rax_rdx(ctxt, "mul", ex);
- return X86EMUL_CONTINUE;
-}
-
-static int em_imul_ex(struct x86_emulate_ctxt *ctxt)
-{
- u8 ex = 0;
-
- emulate_1op_rax_rdx(ctxt, "imul", ex);
- return X86EMUL_CONTINUE;
-}
-
static int em_div_ex(struct x86_emulate_ctxt *ctxt)
{
u8 de = 0;
@@ -3702,8 +3698,8 @@ static const struct opcode group3[] = {
F(DstMem | SrcImm | NoWrite, em_test),
F(DstMem | SrcNone | Lock, em_not),
F(DstMem | SrcNone | Lock, em_neg),
- I(DstXacc | Src2Mem, em_mul_ex),
- I(DstXacc | Src2Mem, em_imul_ex),
+ F(DstXacc | Src2Mem, em_mul_ex),
+ F(DstXacc | Src2Mem, em_imul_ex),
I(DstXacc | Src2Mem, em_div_ex),
I(DstXacc | Src2Mem, em_idiv_ex),
};
@@ -4519,7 +4515,8 @@ static void fetch_possible_mmx_operand(struct x86_emulate_ctxt *ctxt,
static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *))
{
ulong flags = (ctxt->eflags & EFLAGS_MASK) | X86_EFLAGS_IF;
- fop += __ffs(ctxt->dst.bytes) * FASTOP_SIZE;
+ if (!(ctxt->d & ByteOp))
+ fop += __ffs(ctxt->dst.bytes) * FASTOP_SIZE;
asm("push %[flags]; popf; call *%[fastop]; pushf; pop %[flags]\n"
: "+a"(ctxt->dst.val), "+d"(ctxt->src.val), [flags]"+D"(flags)
: "c"(ctxt->src2.val), [fastop]"S"(fop));
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 6/8] KVM: x86 emulator: convert DIV/IDIV to fastop
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
` (4 preceding siblings ...)
2013-02-09 9:31 ` [PATCH 5/8] KVM: x86 emulator: convert single-operand MUL/IMUL to fastop Avi Kivity
@ 2013-02-09 9:31 ` Avi Kivity
2013-02-10 12:26 ` Gleb Natapov
2013-02-09 9:31 ` [PATCH 7/8] KVM: x86 emulator: drop unused old-style inline emulation Avi Kivity
2013-02-09 9:31 ` [PATCH 8/8] KVM: x86 emulator: convert XADD to fastop Avi Kivity
7 siblings, 1 reply; 13+ messages in thread
From: Avi Kivity @ 2013-02-09 9:31 UTC (permalink / raw)
To: Gleb Natapov, Marcelo Tosatti; +Cc: kvm
Since DIV and IDIV can generate exceptions, we need an additional output
parameter indicating whether an execption has occured. To avoid increasing
register pressure on i386, we use %rsi, which is already allocated for
the fastop code pointer.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 51 +++++++++++++++++++++++++-------------------------
1 file changed, 26 insertions(+), 25 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 0f0c15e..89f56bb 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -180,6 +180,7 @@
* src: rdx (in/out)
* src2: rcx (in)
* flags: rflags (in/out)
+ * ex: rsi (in:nonzero, out:zero if exception)
*
* Moreover, they are all exactly FASTOP_SIZE bytes long, so functions for
* different operand sizes can be reached by calculation, rather than a jump
@@ -467,7 +468,10 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
#define FOPNOP() FOP_ALIGN FOP_RET
#define FOP1E(op, dst) \
- FOP_ALIGN #op " %" #dst " \n\t" FOP_RET
+ FOP_ALIGN "10: " #op " %" #dst " \n\t" FOP_RET
+
+#define FOP1EEX(op, dst) \
+ FOP1E(op, dst) _ASM_EXTABLE(10b, kvm_fastop_exception)
#define FASTOP1(op) \
FOP_START(op) \
@@ -486,6 +490,15 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
ON64(FOP1E(op, rcx)) \
FOP_END
+/* 1-operand, using src2 (for MUL/DIV r/m), with exceptions */
+#define FASTOP1SRC2EX(op, name) \
+ FOP_START(name) \
+ FOP1EEX(op, cl) \
+ FOP1EEX(op, cx) \
+ FOP1EEX(op, ecx) \
+ ON64(FOP1EEX(op, rcx)) \
+ FOP_END
+
#define FOP2E(op, dst, src) \
FOP_ALIGN #op " %" #src ", %" #dst " \n\t" FOP_RET
@@ -530,6 +543,9 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
/* Special case for SETcc - 1 instruction per cc */
#define FOP_SETCC(op) ".align 4; " #op " %al; ret \n\t"
+asm(".global kvm_fastop_exception \n"
+ "kvm_fastop_exception: xor %esi, %esi; ret");
+
FOP_START(setcc)
FOP_SETCC(seto)
FOP_SETCC(setno)
@@ -1001,6 +1017,8 @@ FASTOP2(test);
FASTOP1SRC2(mul, mul_ex);
FASTOP1SRC2(imul, imul_ex);
+FASTOP1SRC2EX(div, div_ex);
+FASTOP1SRC2EX(idiv, idiv_ex);
FASTOP3WCL(shld);
FASTOP3WCL(shrd);
@@ -2116,26 +2134,6 @@ static int em_jmp_far(struct x86_emulate_ctxt *ctxt)
return X86EMUL_CONTINUE;
}
-static int em_div_ex(struct x86_emulate_ctxt *ctxt)
-{
- u8 de = 0;
-
- emulate_1op_rax_rdx(ctxt, "div", de);
- if (de)
- return emulate_de(ctxt);
- return X86EMUL_CONTINUE;
-}
-
-static int em_idiv_ex(struct x86_emulate_ctxt *ctxt)
-{
- u8 de = 0;
-
- emulate_1op_rax_rdx(ctxt, "idiv", de);
- if (de)
- return emulate_de(ctxt);
- return X86EMUL_CONTINUE;
-}
-
static int em_grp45(struct x86_emulate_ctxt *ctxt)
{
int rc = X86EMUL_CONTINUE;
@@ -3700,8 +3698,8 @@ static const struct opcode group3[] = {
F(DstMem | SrcNone | Lock, em_neg),
F(DstXacc | Src2Mem, em_mul_ex),
F(DstXacc | Src2Mem, em_imul_ex),
- I(DstXacc | Src2Mem, em_div_ex),
- I(DstXacc | Src2Mem, em_idiv_ex),
+ F(DstXacc | Src2Mem, em_div_ex),
+ F(DstXacc | Src2Mem, em_idiv_ex),
};
static const struct opcode group4[] = {
@@ -4518,9 +4516,12 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *))
if (!(ctxt->d & ByteOp))
fop += __ffs(ctxt->dst.bytes) * FASTOP_SIZE;
asm("push %[flags]; popf; call *%[fastop]; pushf; pop %[flags]\n"
- : "+a"(ctxt->dst.val), "+d"(ctxt->src.val), [flags]"+D"(flags)
- : "c"(ctxt->src2.val), [fastop]"S"(fop));
+ : "+a"(ctxt->dst.val), "+d"(ctxt->src.val), [flags]"+D"(flags),
+ [fastop]"+S"(fop)
+ : "c"(ctxt->src2.val));
ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK);
+ if (!fop)
+ return emulate_de(ctxt);
return X86EMUL_CONTINUE;
}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH 6/8] KVM: x86 emulator: convert DIV/IDIV to fastop
2013-02-09 9:31 ` [PATCH 6/8] KVM: x86 emulator: convert DIV/IDIV " Avi Kivity
@ 2013-02-10 12:26 ` Gleb Natapov
0 siblings, 0 replies; 13+ messages in thread
From: Gleb Natapov @ 2013-02-10 12:26 UTC (permalink / raw)
To: Avi Kivity; +Cc: Marcelo Tosatti, kvm
On Sat, Feb 09, 2013 at 11:31:49AM +0200, Avi Kivity wrote:
> Since DIV and IDIV can generate exceptions, we need an additional output
> parameter indicating whether an execption has occured. To avoid increasing
> register pressure on i386, we use %rsi, which is already allocated for
> the fastop code pointer.
>
> Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
> ---
> arch/x86/kvm/emulate.c | 51 +++++++++++++++++++++++++-------------------------
> 1 file changed, 26 insertions(+), 25 deletions(-)
>
> diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
> index 0f0c15e..89f56bb 100644
> --- a/arch/x86/kvm/emulate.c
> +++ b/arch/x86/kvm/emulate.c
> @@ -180,6 +180,7 @@
> * src: rdx (in/out)
> * src2: rcx (in)
> * flags: rflags (in/out)
> + * ex: rsi (in:nonzero, out:zero if exception)
in:fastop pointer, or "code pointer" may be?
> *
> * Moreover, they are all exactly FASTOP_SIZE bytes long, so functions for
> * different operand sizes can be reached by calculation, rather than a jump
> @@ -467,7 +468,10 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
> #define FOPNOP() FOP_ALIGN FOP_RET
>
> #define FOP1E(op, dst) \
> - FOP_ALIGN #op " %" #dst " \n\t" FOP_RET
> + FOP_ALIGN "10: " #op " %" #dst " \n\t" FOP_RET
> +
> +#define FOP1EEX(op, dst) \
> + FOP1E(op, dst) _ASM_EXTABLE(10b, kvm_fastop_exception)
>
> #define FASTOP1(op) \
> FOP_START(op) \
> @@ -486,6 +490,15 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
> ON64(FOP1E(op, rcx)) \
> FOP_END
>
> +/* 1-operand, using src2 (for MUL/DIV r/m), with exceptions */
> +#define FASTOP1SRC2EX(op, name) \
> + FOP_START(name) \
> + FOP1EEX(op, cl) \
> + FOP1EEX(op, cx) \
> + FOP1EEX(op, ecx) \
> + ON64(FOP1EEX(op, rcx)) \
> + FOP_END
> +
> #define FOP2E(op, dst, src) \
> FOP_ALIGN #op " %" #src ", %" #dst " \n\t" FOP_RET
>
> @@ -530,6 +543,9 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
> /* Special case for SETcc - 1 instruction per cc */
> #define FOP_SETCC(op) ".align 4; " #op " %al; ret \n\t"
>
> +asm(".global kvm_fastop_exception \n"
> + "kvm_fastop_exception: xor %esi, %esi; ret");
> +
> FOP_START(setcc)
> FOP_SETCC(seto)
> FOP_SETCC(setno)
> @@ -1001,6 +1017,8 @@ FASTOP2(test);
>
> FASTOP1SRC2(mul, mul_ex);
> FASTOP1SRC2(imul, imul_ex);
> +FASTOP1SRC2EX(div, div_ex);
> +FASTOP1SRC2EX(idiv, idiv_ex);
>
> FASTOP3WCL(shld);
> FASTOP3WCL(shrd);
> @@ -2116,26 +2134,6 @@ static int em_jmp_far(struct x86_emulate_ctxt *ctxt)
> return X86EMUL_CONTINUE;
> }
>
> -static int em_div_ex(struct x86_emulate_ctxt *ctxt)
> -{
> - u8 de = 0;
> -
> - emulate_1op_rax_rdx(ctxt, "div", de);
> - if (de)
> - return emulate_de(ctxt);
> - return X86EMUL_CONTINUE;
> -}
> -
> -static int em_idiv_ex(struct x86_emulate_ctxt *ctxt)
> -{
> - u8 de = 0;
> -
> - emulate_1op_rax_rdx(ctxt, "idiv", de);
> - if (de)
> - return emulate_de(ctxt);
> - return X86EMUL_CONTINUE;
> -}
> -
> static int em_grp45(struct x86_emulate_ctxt *ctxt)
> {
> int rc = X86EMUL_CONTINUE;
> @@ -3700,8 +3698,8 @@ static const struct opcode group3[] = {
> F(DstMem | SrcNone | Lock, em_neg),
> F(DstXacc | Src2Mem, em_mul_ex),
> F(DstXacc | Src2Mem, em_imul_ex),
> - I(DstXacc | Src2Mem, em_div_ex),
> - I(DstXacc | Src2Mem, em_idiv_ex),
> + F(DstXacc | Src2Mem, em_div_ex),
> + F(DstXacc | Src2Mem, em_idiv_ex),
> };
>
> static const struct opcode group4[] = {
> @@ -4518,9 +4516,12 @@ static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *))
> if (!(ctxt->d & ByteOp))
> fop += __ffs(ctxt->dst.bytes) * FASTOP_SIZE;
> asm("push %[flags]; popf; call *%[fastop]; pushf; pop %[flags]\n"
> - : "+a"(ctxt->dst.val), "+d"(ctxt->src.val), [flags]"+D"(flags)
> - : "c"(ctxt->src2.val), [fastop]"S"(fop));
> + : "+a"(ctxt->dst.val), "+d"(ctxt->src.val), [flags]"+D"(flags),
> + [fastop]"+S"(fop)
> + : "c"(ctxt->src2.val));
> ctxt->eflags = (ctxt->eflags & ~EFLAGS_MASK) | (flags & EFLAGS_MASK);
> + if (!fop)
Looks like this magic deserves at least a short comment :)
> + return emulate_de(ctxt);
> return X86EMUL_CONTINUE;
> }
>
> --
> 1.8.1.2
--
Gleb.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH 7/8] KVM: x86 emulator: drop unused old-style inline emulation
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
` (5 preceding siblings ...)
2013-02-09 9:31 ` [PATCH 6/8] KVM: x86 emulator: convert DIV/IDIV " Avi Kivity
@ 2013-02-09 9:31 ` Avi Kivity
2013-02-09 9:31 ` [PATCH 8/8] KVM: x86 emulator: convert XADD to fastop Avi Kivity
7 siblings, 0 replies; 13+ messages in thread
From: Avi Kivity @ 2013-02-09 9:31 UTC (permalink / raw)
To: Gleb Natapov, Marcelo Tosatti; +Cc: kvm
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 198 -------------------------------------------------
1 file changed, 198 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 89f56bb..a706e52 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -282,174 +282,17 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt)
}
/*
- * Instruction emulation:
- * Most instructions are emulated directly via a fragment of inline assembly
- * code. This allows us to save/restore EFLAGS and thus very easily pick up
- * any modified flags.
- */
-
-#if defined(CONFIG_X86_64)
-#define _LO32 "k" /* force 32-bit operand */
-#define _STK "%%rsp" /* stack pointer */
-#elif defined(__i386__)
-#define _LO32 "" /* force 32-bit operand */
-#define _STK "%%esp" /* stack pointer */
-#endif
-
-/*
* These EFLAGS bits are restored from saved value during emulation, and
* any changes are written back to the saved value after emulation.
*/
#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
-/* Before executing instruction: restore necessary bits in EFLAGS. */
-#define _PRE_EFLAGS(_sav, _msk, _tmp) \
- /* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); _sav &= ~_msk; */ \
- "movl %"_sav",%"_LO32 _tmp"; " \
- "push %"_tmp"; " \
- "push %"_tmp"; " \
- "movl %"_msk",%"_LO32 _tmp"; " \
- "andl %"_LO32 _tmp",("_STK"); " \
- "pushf; " \
- "notl %"_LO32 _tmp"; " \
- "andl %"_LO32 _tmp",("_STK"); " \
- "andl %"_LO32 _tmp","__stringify(BITS_PER_LONG/4)"("_STK"); " \
- "pop %"_tmp"; " \
- "orl %"_LO32 _tmp",("_STK"); " \
- "popf; " \
- "pop %"_sav"; "
-
-/* After executing instruction: write-back necessary bits in EFLAGS. */
-#define _POST_EFLAGS(_sav, _msk, _tmp) \
- /* _sav |= EFLAGS & _msk; */ \
- "pushf; " \
- "pop %"_tmp"; " \
- "andl %"_msk",%"_LO32 _tmp"; " \
- "orl %"_LO32 _tmp",%"_sav"; "
-
#ifdef CONFIG_X86_64
#define ON64(x) x
#else
#define ON64(x)
#endif
-#define ____emulate_2op(ctxt, _op, _x, _y, _suffix, _dsttype) \
- do { \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "4", "2") \
- _op _suffix " %"_x"3,%1; " \
- _POST_EFLAGS("0", "4", "2") \
- : "=m" ((ctxt)->eflags), \
- "+q" (*(_dsttype*)&(ctxt)->dst.val), \
- "=&r" (_tmp) \
- : _y ((ctxt)->src.val), "i" (EFLAGS_MASK)); \
- } while (0)
-
-
-/* Raw emulation: instruction has two explicit operands. */
-#define __emulate_2op_nobyte(ctxt,_op,_wx,_wy,_lx,_ly,_qx,_qy) \
- do { \
- unsigned long _tmp; \
- \
- switch ((ctxt)->dst.bytes) { \
- case 2: \
- ____emulate_2op(ctxt,_op,_wx,_wy,"w",u16); \
- break; \
- case 4: \
- ____emulate_2op(ctxt,_op,_lx,_ly,"l",u32); \
- break; \
- case 8: \
- ON64(____emulate_2op(ctxt,_op,_qx,_qy,"q",u64)); \
- break; \
- } \
- } while (0)
-
-#define __emulate_2op(ctxt,_op,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
- do { \
- unsigned long _tmp; \
- switch ((ctxt)->dst.bytes) { \
- case 1: \
- ____emulate_2op(ctxt,_op,_bx,_by,"b",u8); \
- break; \
- default: \
- __emulate_2op_nobyte(ctxt, _op, \
- _wx, _wy, _lx, _ly, _qx, _qy); \
- break; \
- } \
- } while (0)
-
-/* Source operand is byte-sized and may be restricted to just %cl. */
-#define emulate_2op_SrcB(ctxt, _op) \
- __emulate_2op(ctxt, _op, "b", "c", "b", "c", "b", "c", "b", "c")
-
-/* Source operand is byte, word, long or quad sized. */
-#define emulate_2op_SrcV(ctxt, _op) \
- __emulate_2op(ctxt, _op, "b", "q", "w", "r", _LO32, "r", "", "r")
-
-/* Source operand is word, long or quad sized. */
-#define emulate_2op_SrcV_nobyte(ctxt, _op) \
- __emulate_2op_nobyte(ctxt, _op, "w", "r", _LO32, "r", "", "r")
-
-/* Instruction has three operands and one operand is stored in ECX register */
-#define __emulate_2op_cl(ctxt, _op, _suffix, _type) \
- do { \
- unsigned long _tmp; \
- _type _clv = (ctxt)->src2.val; \
- _type _srcv = (ctxt)->src.val; \
- _type _dstv = (ctxt)->dst.val; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "5", "2") \
- _op _suffix " %4,%1 \n" \
- _POST_EFLAGS("0", "5", "2") \
- : "=m" ((ctxt)->eflags), "+r" (_dstv), "=&r" (_tmp) \
- : "c" (_clv) , "r" (_srcv), "i" (EFLAGS_MASK) \
- ); \
- \
- (ctxt)->src2.val = (unsigned long) _clv; \
- (ctxt)->src2.val = (unsigned long) _srcv; \
- (ctxt)->dst.val = (unsigned long) _dstv; \
- } while (0)
-
-#define emulate_2op_cl(ctxt, _op) \
- do { \
- switch ((ctxt)->dst.bytes) { \
- case 2: \
- __emulate_2op_cl(ctxt, _op, "w", u16); \
- break; \
- case 4: \
- __emulate_2op_cl(ctxt, _op, "l", u32); \
- break; \
- case 8: \
- ON64(__emulate_2op_cl(ctxt, _op, "q", ulong)); \
- break; \
- } \
- } while (0)
-
-#define __emulate_1op(ctxt, _op, _suffix) \
- do { \
- unsigned long _tmp; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "3", "2") \
- _op _suffix " %1; " \
- _POST_EFLAGS("0", "3", "2") \
- : "=m" ((ctxt)->eflags), "+m" ((ctxt)->dst.val), \
- "=&r" (_tmp) \
- : "i" (EFLAGS_MASK)); \
- } while (0)
-
-/* Instruction has only one explicit operand (no source operand). */
-#define emulate_1op(ctxt, _op) \
- do { \
- switch ((ctxt)->dst.bytes) { \
- case 1: __emulate_1op(ctxt, _op, "b"); break; \
- case 2: __emulate_1op(ctxt, _op, "w"); break; \
- case 4: __emulate_1op(ctxt, _op, "l"); break; \
- case 8: ON64(__emulate_1op(ctxt, _op, "q")); break; \
- } \
- } while (0)
-
static int fastop(struct x86_emulate_ctxt *ctxt, void (*fop)(struct fastop *));
#define FOP_ALIGN ".align " __stringify(FASTOP_SIZE) " \n\t"
@@ -565,47 +408,6 @@ FOP_SETCC(setle)
FOP_SETCC(setnle)
FOP_END;
-#define __emulate_1op_rax_rdx(ctxt, _op, _suffix, _ex) \
- do { \
- unsigned long _tmp; \
- ulong *rax = &ctxt->dst.val; \
- ulong *rdx = &ctxt->src.val; \
- \
- __asm__ __volatile__ ( \
- _PRE_EFLAGS("0", "5", "1") \
- "1: \n\t" \
- _op _suffix " %6; " \
- "2: \n\t" \
- _POST_EFLAGS("0", "5", "1") \
- ".pushsection .fixup,\"ax\" \n\t" \
- "3: movb $1, %4 \n\t" \
- "jmp 2b \n\t" \
- ".popsection \n\t" \
- _ASM_EXTABLE(1b, 3b) \
- : "=m" ((ctxt)->eflags), "=&r" (_tmp), \
- "+a" (*rax), "+d" (*rdx), "+qm"(_ex) \
- : "i" (EFLAGS_MASK), "m" ((ctxt)->src2.val)); \
- } while (0)
-
-/* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */
-#define emulate_1op_rax_rdx(ctxt, _op, _ex) \
- do { \
- switch((ctxt)->src.bytes) { \
- case 1: \
- __emulate_1op_rax_rdx(ctxt, _op, "b", _ex); \
- break; \
- case 2: \
- __emulate_1op_rax_rdx(ctxt, _op, "w", _ex); \
- break; \
- case 4: \
- __emulate_1op_rax_rdx(ctxt, _op, "l", _ex); \
- break; \
- case 8: ON64( \
- __emulate_1op_rax_rdx(ctxt, _op, "q", _ex)); \
- break; \
- } \
- } while (0)
-
static int emulator_check_intercept(struct x86_emulate_ctxt *ctxt,
enum x86_intercept intercept,
enum x86_intercept_stage stage)
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH 8/8] KVM: x86 emulator: convert XADD to fastop
2013-02-09 9:31 [PATCH 0/8] Convert MUL/DIV to fastop Avi Kivity
` (6 preceding siblings ...)
2013-02-09 9:31 ` [PATCH 7/8] KVM: x86 emulator: drop unused old-style inline emulation Avi Kivity
@ 2013-02-09 9:31 ` Avi Kivity
7 siblings, 0 replies; 13+ messages in thread
From: Avi Kivity @ 2013-02-09 9:31 UTC (permalink / raw)
To: Gleb Natapov, Marcelo Tosatti; +Cc: kvm
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
---
arch/x86/kvm/emulate.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index a706e52..2f895c2 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -847,6 +847,8 @@ FASTOP2W(bts);
FASTOP2W(btr);
FASTOP2W(btc);
+FASTOP2(xadd);
+
static u8 test_cc(unsigned int condition, unsigned long flags)
{
u8 rc;
@@ -3824,7 +3826,7 @@ static const struct opcode twobyte_table[256] = {
F(DstReg | SrcMem | ModRM, em_bsf), F(DstReg | SrcMem | ModRM, em_bsr),
D(DstReg | SrcMem8 | ModRM | Mov), D(DstReg | SrcMem16 | ModRM | Mov),
/* 0xC0 - 0xC7 */
- D2bv(DstMem | SrcReg | ModRM | Lock),
+ F2bv(DstMem | SrcReg | ModRM | SrcWrite | Lock, em_xadd),
N, D(DstMem | SrcReg | ModRM | Mov),
N, N, N, GD(0, &group9),
/* 0xC8 - 0xCF */
@@ -4643,12 +4645,6 @@ twobyte_insn:
ctxt->dst.val = (ctxt->src.bytes == 1) ? (s8) ctxt->src.val :
(s16) ctxt->src.val;
break;
- case 0xc0 ... 0xc1: /* xadd */
- fastop(ctxt, em_add);
- /* Write back the register source. */
- ctxt->src.val = ctxt->dst.orig_val;
- write_register_operand(&ctxt->src);
- break;
case 0xc3: /* movnti */
ctxt->dst.bytes = ctxt->op_bytes;
ctxt->dst.val = (ctxt->op_bytes == 4) ? (u32) ctxt->src.val :
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread