From: Gleb Natapov <gleb@redhat.com>
To: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>,
avi.kivity@gmail.com, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, takuya.yoshikawa@gmail.com
Subject: Re: [PATCH v4 4/6] KVM: MMU: fast invalid all shadow pages
Date: Mon, 6 May 2013 15:36:26 +0300 [thread overview]
Message-ID: <20130506123625.GB12349@redhat.com> (raw)
In-Reply-To: <518725DF.5090503@linux.vnet.ibm.com>
On Mon, May 06, 2013 at 11:39:11AM +0800, Xiao Guangrong wrote:
> On 05/04/2013 08:52 AM, Marcelo Tosatti wrote:
> > On Sat, May 04, 2013 at 12:51:06AM +0800, Xiao Guangrong wrote:
> >> On 05/03/2013 11:53 PM, Marcelo Tosatti wrote:
> >>> On Fri, May 03, 2013 at 01:52:07PM +0800, Xiao Guangrong wrote:
> >>>> On 05/03/2013 09:05 AM, Marcelo Tosatti wrote:
> >>>>
> >>>>>> +
> >>>>>> +/*
> >>>>>> + * Fast invalid all shadow pages belong to @slot.
> >>>>>> + *
> >>>>>> + * @slot != NULL means the invalidation is caused the memslot specified
> >>>>>> + * by @slot is being deleted, in this case, we should ensure that rmap
> >>>>>> + * and lpage-info of the @slot can not be used after calling the function.
> >>>>>> + *
> >>>>>> + * @slot == NULL means the invalidation due to other reasons, we need
> >>>>>> + * not care rmap and lpage-info since they are still valid after calling
> >>>>>> + * the function.
> >>>>>> + */
> >>>>>> +void kvm_mmu_invalid_memslot_pages(struct kvm *kvm,
> >>>>>> + struct kvm_memory_slot *slot)
> >>>>>> +{
> >>>>>> + spin_lock(&kvm->mmu_lock);
> >>>>>> + kvm->arch.mmu_valid_gen++;
> >>>>>> +
> >>>>>> + /*
> >>>>>> + * All shadow paes are invalid, reset the large page info,
> >>>>>> + * then we can safely desotry the memslot, it is also good
> >>>>>> + * for large page used.
> >>>>>> + */
> >>>>>> + kvm_clear_all_lpage_info(kvm);
> >>>>>
> >>>>> Xiao,
> >>>>>
> >>>>> I understood it was agreed that simple mmu_lock lockbreak while
> >>>>> avoiding zapping of newly instantiated pages upon a
> >>>>>
> >>>>> if(spin_needbreak)
> >>>>> cond_resched_lock()
> >>>>>
> >>>>> cycle was enough as a first step? And then later introduce root zapping
> >>>>> along with measurements.
> >>>>>
> >>>>> https://lkml.org/lkml/2013/4/22/544
> >>>>
> >>>> Yes, it is.
> >>>>
> >>>> See the changelog in 0/0:
> >>>>
> >>>> " we use lock-break technique to zap all sptes linked on the
> >>>> invalid rmap, it is not very effective but good for the first step."
> >>>>
> >>>> Thanks!
> >>>
> >>> Sure, but what is up with zeroing kvm_clear_all_lpage_info(kvm) and
> >>> zapping the root? Only lock-break technique along with generation number
> >>> was what was agreed.
> >>
> >> Marcelo,
> >>
> >> Please Wait... I am completely confused. :(
> >>
> >> Let's clarify "zeroing kvm_clear_all_lpage_info(kvm) and zapping the root" first.
> >> Are these changes you wanted?
> >>
> >> void kvm_mmu_invalid_memslot_pages(struct kvm *kvm,
> >> struct kvm_memory_slot *slot)
> >> {
> >> spin_lock(&kvm->mmu_lock);
> >> kvm->arch.mmu_valid_gen++;
> >>
> >> /* Zero all root pages.*/
> >> restart:
> >> list_for_each_entry_safe(sp, node, &kvm->arch.active_mmu_pages, link) {
> >> if (!sp->root_count)
> >> continue;
> >>
> >> if (kvm_mmu_prepare_zap_page(kvm, sp, &invalid_list))
> >> goto restart;
> >> }
> >>
> >> /*
> >> * All shadow paes are invalid, reset the large page info,
> >> * then we can safely desotry the memslot, it is also good
> >> * for large page used.
> >> */
> >> kvm_clear_all_lpage_info(kvm);
> >>
> >> kvm_mmu_commit_zap_page(kvm, &invalid_list);
> >> spin_unlock(&kvm->mmu_lock);
> >> }
> >>
> >> static void rmap_remove(struct kvm *kvm, u64 *spte)
> >> {
> >> struct kvm_mmu_page *sp;
> >> gfn_t gfn;
> >> unsigned long *rmapp;
> >>
> >> sp = page_header(__pa(spte));
> >> +
> >> + /* Let invalid sp do not access its rmap. */
> >> + if (!sp_is_valid(sp))
> >> + return;
> >> +
> >> gfn = kvm_mmu_page_get_gfn(sp, spte - sp->spt);
> >> rmapp = gfn_to_rmap(kvm, gfn, sp->role.level);
> >> pte_list_remove(spte, rmapp);
> >> }
> >>
> >> If yes, there is the reason why we can not do this that i mentioned before:
> >>
> >> after call kvm_mmu_invalid_memslot_pages(), the memslot->rmap will be destroyed.
> >> Later, if host reclaim page, the mmu-notify handlers, ->invalidate_page and
> >> ->invalidate_range_start, can not find any spte using the host page, then
> >> Accessed/Dirty for host page is missing tracked.
> >> (missing call kvm_set_pfn_accessed and kvm_set_pfn_dirty properly.)
> >>
> >> What's your idea?
> >
> >
> > Step 1) Fix kvm_mmu_zap_all's behaviour: introduce lockbreak via
> > spin_needbreak. Use generation numbers so that in case kvm_mmu_zap_all
> > releases mmu_lock and reacquires it again, only shadow pages
> > from the generation with which kvm_mmu_zap_all started are zapped (this
> > guarantees forward progress and eventual termination).
> >
> > kvm_mmu_zap_generation()
> > spin_lock(mmu_lock)
> > int generation = kvm->arch.mmu_generation;
> >
> > for_each_shadow_page(sp) {
> > if (sp->generation == kvm->arch.mmu_generation)
> > zap_page(sp)
> > if (spin_needbreak(mmu_lock)) {
> > kvm->arch.mmu_generation++;
> > cond_resched_lock(mmu_lock);
> > }
> > }
> >
> > kvm_mmu_zap_all()
> > spin_lock(mmu_lock)
> > for_each_shadow_page(sp) {
> > if (spin_needbreak(mmu_lock)) {
> > cond_resched_lock(mmu_lock);
> > }
> > }
> >
> > Use kvm_mmu_zap_generation for kvm_arch_flush_shadow_memslot.
> > Use kvm_mmu_zap_all for kvm_mmu_notifier_release,kvm_destroy_vm.
> >
> > This addresses the main problem: excessively long hold times
> > of kvm_mmu_zap_all with very large guests.
> >
> > Do you see any problem with this logic? This was what i was thinking
> > we agreed.
>
> No. I understand it and it can work.
>
> Actually, it is similar with Gleb's idea that "zapping stale shadow pages
> (and uses lock break technique)", after some discussion, we thought "only zap
> shadow pages that are reachable from the slot's rmap" is better, that is this
> patchset does.
> (https://lkml.org/lkml/2013/4/23/73)
>
But this is not what the patch is doing. Close, but not the same :)
Instead of zapping shadow pages reachable from slot's rmap the patch
does kvm_unmap_rmapp() which drop all spte without zapping shadow pages.
That is why you need special code to re-init lpage_info. What I proposed
was to call zap_page() on all shadow pages reachable from rmap. This
will take care of lpage_info counters. Does this make sense?
> >
> > Step 2) Show that the optimization to zap only the roots is worthwhile
> > via benchmarking, and implement it.
>
> This is what i am confused. I can not understand how "zap only the roots"
> works. You mean these change?
>
> kvm_mmu_zap_generation()
> spin_lock(mmu_lock)
> int generation = kvm->arch.mmu_generation;
>
> for_each_shadow_page(sp) {
> /* Change here. */
> => if ((sp->generation == kvm->arch.mmu_generation) &&
> => sp->root_count)
> zap_page(sp)
>
> if (spin_needbreak(mmu_lock)) {
> kvm->arch.mmu_generation++;
> cond_resched_lock(mmu_lock);
> }
> }
>
> If we do this, there will have shadow pages that are linked to invalid memslot's
> rmap. How do we handle these pages and the mmu-notify issue?
>
> Thanks!
>
--
Gleb.
next prev parent reply other threads:[~2013-05-06 12:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-27 3:13 [PATCH v4 0/6] KVM: MMU: fast zap all shadow pages Xiao Guangrong
2013-04-27 3:13 ` [PATCH v4 1/6] KVM: MMU: drop unnecessary kvm_reload_remote_mmus Xiao Guangrong
2013-04-27 3:13 ` [PATCH v4 2/6] KVM: x86: introduce memslot_set_lpage_disallowed Xiao Guangrong
2013-05-03 2:10 ` Takuya Yoshikawa
2013-05-03 5:55 ` Xiao Guangrong
2013-04-27 3:13 ` [PATCH v4 3/6] KVM: MMU: introduce kvm_clear_all_lpage_info Xiao Guangrong
2013-05-03 2:15 ` Takuya Yoshikawa
2013-05-03 5:57 ` Xiao Guangrong
2013-04-27 3:13 ` [PATCH v4 4/6] KVM: MMU: fast invalid all shadow pages Xiao Guangrong
2013-05-03 1:05 ` Marcelo Tosatti
2013-05-03 5:52 ` Xiao Guangrong
2013-05-03 15:53 ` Marcelo Tosatti
2013-05-03 16:51 ` Xiao Guangrong
2013-05-04 0:52 ` Marcelo Tosatti
2013-05-04 0:56 ` Marcelo Tosatti
2013-05-06 3:39 ` Xiao Guangrong
2013-05-06 12:36 ` Gleb Natapov [this message]
2013-05-06 13:10 ` Xiao Guangrong
2013-05-06 17:24 ` Gleb Natapov
2013-05-06 17:45 ` Xiao Guangrong
2013-05-07 8:58 ` Gleb Natapov
2013-05-07 9:41 ` Xiao Guangrong
2013-05-07 10:00 ` Gleb Natapov
2013-05-07 14:33 ` Marcelo Tosatti
2013-05-07 14:56 ` Gleb Natapov
2013-05-07 15:09 ` Marcelo Tosatti
2013-05-08 10:41 ` Gleb Natapov
2013-05-06 19:50 ` Marcelo Tosatti
2013-05-07 3:39 ` Xiao Guangrong
2013-05-07 14:42 ` Marcelo Tosatti
2013-05-03 2:27 ` Takuya Yoshikawa
2013-05-03 6:00 ` Xiao Guangrong
2013-04-27 3:13 ` [PATCH v4 5/6] KVM: x86: use the fast way to invalid all pages Xiao Guangrong
2013-04-27 3:13 ` [PATCH v4 6/6] KVM: MMU: make kvm_mmu_zap_all preemptable Xiao Guangrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130506123625.GB12349@redhat.com \
--to=gleb@redhat.com \
--cc=avi.kivity@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=takuya.yoshikawa@gmail.com \
--cc=xiaoguangrong@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox