From: Gleb Natapov <gleb@redhat.com>
To: Vadim Rozenfeld <vrozenfe@redhat.com>
Cc: kvm@vger.kernel.org, mtosatti@redhat.com, pl@dlh.net
Subject: Re: [RFC PATCH 1/2] Hyper-H reference counter
Date: Thu, 16 May 2013 11:34:51 +0300 [thread overview]
Message-ID: <20130516083450.GM26453@redhat.com> (raw)
In-Reply-To: <1368445517-5496-2-git-send-email-vrozenfe@redhat.com>
On Mon, May 13, 2013 at 09:45:16PM +1000, Vadim Rozenfeld wrote:
> Signed-off: Peter Lieven <pl@dlh.net>
> Signed-off: Gleb Natapov <gleb@redhat.com>
> Signed-off: Vadim Rozenfeld <vrozenfe@redhat.com>
>
> The following patch allows to activate Hyper-V
> reference time counter
> ---
> arch/x86/include/asm/kvm_host.h | 2 ++
> arch/x86/include/uapi/asm/hyperv.h | 3 +++
> arch/x86/kvm/x86.c | 25 ++++++++++++++++++++++++-
> 3 files changed, 29 insertions(+), 1 deletion(-)
>
> diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
> index 3741c65..f0fee35 100644
> --- a/arch/x86/include/asm/kvm_host.h
> +++ b/arch/x86/include/asm/kvm_host.h
> @@ -575,6 +575,8 @@ struct kvm_arch {
> /* fields used by HYPER-V emulation */
> u64 hv_guest_os_id;
> u64 hv_hypercall;
> + u64 hv_ref_count;
> + u64 hv_tsc_page;
>
> #ifdef CONFIG_KVM_MMU_AUDIT
> int audit_point;
> diff --git a/arch/x86/include/uapi/asm/hyperv.h b/arch/x86/include/uapi/asm/hyperv.h
> index b80420b..9711819 100644
> --- a/arch/x86/include/uapi/asm/hyperv.h
> +++ b/arch/x86/include/uapi/asm/hyperv.h
> @@ -136,6 +136,9 @@
> /* MSR used to read the per-partition time reference counter */
> #define HV_X64_MSR_TIME_REF_COUNT 0x40000020
>
> +/* A partition's reference time stamp counter (TSC) page */
> +#define HV_X64_MSR_REFERENCE_TSC 0x40000021
> +
> /* Define the virtual APIC registers */
> #define HV_X64_MSR_EOI 0x40000070
> #define HV_X64_MSR_ICR 0x40000071
> diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> index 094b5d9..1a4036d 100644
> --- a/arch/x86/kvm/x86.c
> +++ b/arch/x86/kvm/x86.c
> @@ -843,7 +843,7 @@ EXPORT_SYMBOL_GPL(kvm_rdpmc);
> static u32 msrs_to_save[] = {
> MSR_KVM_SYSTEM_TIME, MSR_KVM_WALL_CLOCK,
> MSR_KVM_SYSTEM_TIME_NEW, MSR_KVM_WALL_CLOCK_NEW,
> - HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,
> + HV_X64_MSR_GUEST_OS_ID, HV_X64_MSR_HYPERCALL,HV_X64_MSR_TIME_REF_COUNT,
> HV_X64_MSR_APIC_ASSIST_PAGE, MSR_KVM_ASYNC_PF_EN, MSR_KVM_STEAL_TIME,
> MSR_KVM_PV_EOI_EN,
> MSR_IA32_SYSENTER_CS, MSR_IA32_SYSENTER_ESP, MSR_IA32_SYSENTER_EIP,
> @@ -1764,6 +1764,8 @@ static bool kvm_hv_msr_partition_wide(u32 msr)
> switch (msr) {
> case HV_X64_MSR_GUEST_OS_ID:
> case HV_X64_MSR_HYPERCALL:
> + case HV_X64_MSR_REFERENCE_TSC:
> + case HV_X64_MSR_TIME_REF_COUNT:
> r = true;
> break;
> }
> @@ -1803,6 +1805,21 @@ static int set_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 data)
> if (__copy_to_user((void __user *)addr, instructions, 4))
> return 1;
> kvm->arch.hv_hypercall = data;
> + kvm->arch.hv_ref_count = get_kernel_ns();
> + break;
> + }
> + case HV_X64_MSR_REFERENCE_TSC: {
> + u64 gfn;
> + unsigned long addr;
> + u32 tsc_ref;
> + gfn = data >> HV_X64_MSR_HYPERCALL_PAGE_ADDRESS_SHIFT;
Shouldn't you check HV_X64_MSR_TSC_REFERENCE_ENABLE here?
> + addr = gfn_to_hva(kvm, gfn);
> + if (kvm_is_error_hva(addr))
> + return 1;
> + tsc_ref = 0;
> + if(__copy_to_user((void __user *)addr, &tsc_ref, sizeof(tsc_ref)))
> + return 1;
> + kvm->arch.hv_tsc_page = data;
> break;
> }
> default:
> @@ -2229,6 +2246,12 @@ static int get_msr_hyperv_pw(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
> case HV_X64_MSR_HYPERCALL:
> data = kvm->arch.hv_hypercall;
> break;
> + case HV_X64_MSR_TIME_REF_COUNT:
> + data = div_u64(get_kernel_ns() - kvm->arch.hv_ref_count,100);
> + break;
> + case HV_X64_MSR_REFERENCE_TSC:
> + data = kvm->arch.hv_tsc_page;
> + break;
> default:
> vcpu_unimpl(vcpu, "Hyper-V unhandled rdmsr: 0x%x\n", msr);
> return 1;
> --
> 1.8.1.2
--
Gleb.
next prev parent reply other threads:[~2013-05-16 8:34 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-13 11:45 [RFC PATCH 0/2] Hyper-V timers Vadim Rozenfeld
2013-05-13 11:45 ` [RFC PATCH 1/2] Hyper-H reference counter Vadim Rozenfeld
2013-05-13 23:30 ` Eric Northup
2013-05-14 9:46 ` Vadim Rozenfeld
2013-05-16 8:18 ` Gleb Natapov
2013-05-16 8:53 ` Vadim Rozenfeld
2013-05-14 14:14 ` Peter Lieven
2013-05-15 10:24 ` Vadim Rozenfeld
2013-05-16 8:10 ` Gleb Natapov
2013-05-16 8:34 ` Gleb Natapov [this message]
2013-05-16 9:13 ` Vadim Rozenfeld
2013-05-16 9:21 ` Gleb Natapov
2013-05-16 9:28 ` Vadim Rozenfeld
2013-05-16 13:37 ` Paolo Bonzini
2013-05-16 14:22 ` Vadim Rozenfeld
2013-05-16 14:48 ` Paolo Bonzini
2013-05-16 13:44 ` Paolo Bonzini
2013-05-16 14:26 ` Vadim Rozenfeld
2013-05-16 14:45 ` Paolo Bonzini
2013-05-19 6:37 ` Vadim Rozenfeld
2013-05-20 8:05 ` Paolo Bonzini
2013-05-20 8:36 ` Gleb Natapov
2013-05-20 8:42 ` Paolo Bonzini
2013-05-20 8:49 ` Gleb Natapov
2013-05-20 8:56 ` Paolo Bonzini
2013-05-20 9:13 ` Gleb Natapov
2013-05-20 9:25 ` Gleb Natapov
2013-05-20 9:32 ` Paolo Bonzini
2013-05-20 9:41 ` Gleb Natapov
2013-05-20 10:06 ` Peter Lieven
2013-05-20 10:25 ` Vadim Rozenfeld
2013-05-20 10:27 ` Gleb Natapov
2013-05-20 10:44 ` Vadim Rozenfeld
2013-05-20 10:21 ` Vadim Rozenfeld
2013-05-20 9:12 ` Vadim Rozenfeld
2013-05-16 14:40 ` Paolo Bonzini
2013-05-13 11:45 ` [RFC PATCH 2/2] Hyper-V iTSC handler Vadim Rozenfeld
2013-05-16 8:33 ` Gleb Natapov
2013-05-16 8:58 ` Vadim Rozenfeld
2013-05-16 8:02 ` [RFC PATCH 0/2] Hyper-V timers Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130516083450.GM26453@redhat.com \
--to=gleb@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
--cc=pl@dlh.net \
--cc=vrozenfe@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).