* the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)"
@ 2014-01-15 6:48 李义
2014-01-15 8:09 ` Michael S. Tsirkin
0 siblings, 1 reply; 5+ messages in thread
From: 李义 @ 2014-01-15 6:48 UTC (permalink / raw)
To: kvm; +Cc: Alex Williamson, mst
Hi ALL,
i have meet kvm guest os issue at redhat7beta.
Host os:
iredhat7 Beta
#virsh version
Compiled against library: libvirt 1.1.1
Using library: libvirt 1.1.1
Using API: QEMU 1.1.1
Running hypervisor: QEMU 1.5.3
guest os:
2.6.32.43 x86-64
Problem:
reboot at the guest os, the guest os will hang.(i have not find the
reproduce method)
pls: the below is the crash info.
[ 3.446282] Adding 2104504k swap on /dev/vda2. Priority:-1
extents:1 across:2104504k
[ 63.862133] md: stopping all md devices.
[ 64.960702] ACPI: Preparing to enter system sleep state S5
[ 64.961280] Disabling non-boot CPUs ...
[ 66.370651] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 66.370656] Pid: 0, comm: swapper Not tainted
2.6.32.43_guest-1.0.8.kvmguest-default #1
[ 66.370658] Call Trace:
[ 66.370660] <IRQ> [<ffffffff8107b176>] __report_bad_irq+0x26/0xa0
[ 66.370687] [<ffffffff8107b37c>] note_interrupt+0x18c/0x1d0
[ 66.370691] [<ffffffff8107bd4d>] handle_fasteoi_irq+0x13d/0x1c0
[ 66.370701] [<ffffffff8100ee5d>] handle_irq+0x1d/0x30
[ 66.370704] [<ffffffff8100e557>] do_IRQ+0x67/0xe0
[ 66.370708] [<ffffffff8100c813>] ret_from_intr+0x0/0x11
[ 66.370716] [<ffffffff8104ace3>] ? __do_softirq+0x63/0x140
[ 66.370720] [<ffffffff8100cfcc>] ? call_softirq+0x1c/0x30
[ 66.370723] [<ffffffff8100ee05>] ? do_softirq+0x65/0xa0
[ 66.370725] [<ffffffff8104abbd>] ? irq_exit+0x7d/0x90
[ 66.370728] [<ffffffff8100e560>] ? do_IRQ+0x70/0xe0
[ 66.370731] [<ffffffff8100c813>] ? ret_from_intr+0x0/0x11
[ 66.370732] <EOI> [<ffffffff81025586>] ? native_safe_halt+0x6/0x10
[ 66.370747] [<ffffffff81061d65>] ? atomic_notifier_call_chain+0x15/0x20
[ 66.370753] [<ffffffff81013f27>] ? default_idle+0x27/0x50
[ 66.370757] [<ffffffff8100b036>] ? cpu_idle+0x66/0xc0
[ 66.370772] [<ffffffff81597545>] ? rest_init+0x75/0x80
[ 66.370786] [<ffffffff81840c42>] ? start_kernel+0x2ed/0x2f9
[ 66.370790] [<ffffffff818402f4>] ? x86_64_start_reservations+0xfb/0xff
[ 66.370793] [<ffffffff818403f2>] ? x86_64_start_kernel+0xfa/0x109
[ 66.370795] handlers:
[ 66.370796] [<ffffffff8133d7c0>] (vp_interrupt+0x0/0x60)
[ 66.370810] Disabling IRQ #11
进程:
PID: 1943 TASK: ffff88007da18580 CPU: 0 COMMAND: "halt"
#0 [ffff88007e8b1b98] schedule at ffffffff815b295d
#1 [ffff88007e8b1ca0] schedule_timeout at ffffffff815b358e
#2 [ffff88007e8b1d30] schedule_timeout_uninterruptible at ffffffff815b36c9
#3 [ffff88007e8b1d40] msleep at ffffffff81050f98
#4 [ffff88007e8b1d50] native_cpu_die at ffffffff8101d81c
#5 [ffff88007e8b1d80] _cpu_down at ffffffff8159840a
#6 [ffff88007e8b1de0] disable_nonboot_cpus at ffffffff810461f2
#7 [ffff88007e8b1e30] kernel_power_off at ffffffff81057321
#8 [ffff88007e8b1e40] sys_reboot at ffffffff810575dc
#9 [ffff88007e8b1f80] system_call_fastpath at ffffffff8100bf02
RIP: 00007f2d9c768c66 RSP: 00007fff4ad666f8 RFLAGS: 00010202
RAX: 00000000000000a9 RBX: ffffffff8100bf02 RCX: 0000000000000000
RDX: 000000004321fedc RSI: 0000000028121969 RDI: fffffffffee1dead
RBP: 0000000000000003 R8: 0000000000000000 R9: ff00000000000000
R10: 00007fff4ad711e0 R11: 0000000000000202 R12: 0000000000000000
R13: 00007fff4ad71690 R14: 0000000000000003 R15: 0000000000000002
ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b
struct irq_desc {
irq = 11,
timer_rand_state = 0x0,
kstat_irqs = 0xffff88007f80d598,
handle_irq = 0xffffffff8107bc10 <handle_fasteoi_irq>,
chip = 0xffffffff81825e40,
msi_desc = 0x0,
handler_data = 0x0,
chip_data = 0xffffffff817bd4f0,
action = 0xffff88007efda340,
status = 8406528,
depth = 1,
wake_depth = 0,
irq_count = 0,
last_unhandled = 4294908888,
irqs_unhandled = 0,
lock = {
raw_lock = {
{
head_tail = 2532349678,
tickets = {
head = 38638,
tail = 38640
}
}
}
},
affinity = {{
bits = {3, 0}
}},
node = 0,
pending_mask = {{
bits = {0, 0}
}},
threads_active = {
counter = 0
},
wait_for_threads = {
lock = {
raw_lock = {
{
head_tail = 0,
tickets = {
head = 0,
tail = 0
}
}
}
},
task_list = {
next = 0xffffffff817b8ae0,
prev = 0xffffffff817b8ae0
}
},
dir = 0xffff88007f0045c0,
name = 0xffffffff8171cd20 "fasteoi"
}
thanks
yili
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)" 2014-01-15 6:48 the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)" 李义 @ 2014-01-15 8:09 ` Michael S. Tsirkin 2014-01-15 8:59 ` 李义 0 siblings, 1 reply; 5+ messages in thread From: Michael S. Tsirkin @ 2014-01-15 8:09 UTC (permalink / raw) To: 李义; +Cc: kvm, Alex Williamson On Wed, Jan 15, 2014 at 02:48:35PM +0800, 李义 wrote: > Hi ALL, > > i have meet kvm guest os issue at redhat7beta. > > Host os: > iredhat7 Beta > #virsh version > Compiled against library: libvirt 1.1.1 > Using library: libvirt 1.1.1 > Using API: QEMU 1.1.1 > Running hypervisor: QEMU 1.5.3 > > guest os: > 2.6.32.43 x86-64 Which OS is this, exactly? Does this reproduce with a newer guest? > Problem: > reboot at the guest os, the guest os will hang.(i have not find the > reproduce method) > > pls: the below is the crash info. > > [ 3.446282] Adding 2104504k swap on /dev/vda2. Priority:-1 > extents:1 across:2104504k > [ 63.862133] md: stopping all md devices. > [ 64.960702] ACPI: Preparing to enter system sleep state S5 > [ 64.961280] Disabling non-boot CPUs ... > [ 66.370651] irq 11: nobody cared (try booting with the "irqpoll" option) What uses irq 11? Could you check with lspci before you try to shutdown? > [ 66.370656] Pid: 0, comm: swapper Not tainted > 2.6.32.43_guest-1.0.8.kvmguest-default #1 > [ 66.370658] Call Trace: > [ 66.370660] <IRQ> [<ffffffff8107b176>] __report_bad_irq+0x26/0xa0 > [ 66.370687] [<ffffffff8107b37c>] note_interrupt+0x18c/0x1d0 > [ 66.370691] [<ffffffff8107bd4d>] handle_fasteoi_irq+0x13d/0x1c0 > [ 66.370701] [<ffffffff8100ee5d>] handle_irq+0x1d/0x30 > [ 66.370704] [<ffffffff8100e557>] do_IRQ+0x67/0xe0 > [ 66.370708] [<ffffffff8100c813>] ret_from_intr+0x0/0x11 > [ 66.370716] [<ffffffff8104ace3>] ? __do_softirq+0x63/0x140 > [ 66.370720] [<ffffffff8100cfcc>] ? call_softirq+0x1c/0x30 > [ 66.370723] [<ffffffff8100ee05>] ? do_softirq+0x65/0xa0 > [ 66.370725] [<ffffffff8104abbd>] ? irq_exit+0x7d/0x90 > [ 66.370728] [<ffffffff8100e560>] ? do_IRQ+0x70/0xe0 > [ 66.370731] [<ffffffff8100c813>] ? ret_from_intr+0x0/0x11 > [ 66.370732] <EOI> [<ffffffff81025586>] ? native_safe_halt+0x6/0x10 > [ 66.370747] [<ffffffff81061d65>] ? atomic_notifier_call_chain+0x15/0x20 > [ 66.370753] [<ffffffff81013f27>] ? default_idle+0x27/0x50 > [ 66.370757] [<ffffffff8100b036>] ? cpu_idle+0x66/0xc0 > [ 66.370772] [<ffffffff81597545>] ? rest_init+0x75/0x80 > [ 66.370786] [<ffffffff81840c42>] ? start_kernel+0x2ed/0x2f9 > [ 66.370790] [<ffffffff818402f4>] ? x86_64_start_reservations+0xfb/0xff > [ 66.370793] [<ffffffff818403f2>] ? x86_64_start_kernel+0xfa/0x109 > [ 66.370795] handlers: > [ 66.370796] [<ffffffff8133d7c0>] (vp_interrupt+0x0/0x60) > [ 66.370810] Disabling IRQ #11 > > 进程: > PID: 1943 TASK: ffff88007da18580 CPU: 0 COMMAND: "halt" > #0 [ffff88007e8b1b98] schedule at ffffffff815b295d > #1 [ffff88007e8b1ca0] schedule_timeout at ffffffff815b358e > #2 [ffff88007e8b1d30] schedule_timeout_uninterruptible at ffffffff815b36c9 > #3 [ffff88007e8b1d40] msleep at ffffffff81050f98 > #4 [ffff88007e8b1d50] native_cpu_die at ffffffff8101d81c > #5 [ffff88007e8b1d80] _cpu_down at ffffffff8159840a > #6 [ffff88007e8b1de0] disable_nonboot_cpus at ffffffff810461f2 > #7 [ffff88007e8b1e30] kernel_power_off at ffffffff81057321 > #8 [ffff88007e8b1e40] sys_reboot at ffffffff810575dc > #9 [ffff88007e8b1f80] system_call_fastpath at ffffffff8100bf02 > RIP: 00007f2d9c768c66 RSP: 00007fff4ad666f8 RFLAGS: 00010202 > RAX: 00000000000000a9 RBX: ffffffff8100bf02 RCX: 0000000000000000 > RDX: 000000004321fedc RSI: 0000000028121969 RDI: fffffffffee1dead > RBP: 0000000000000003 R8: 0000000000000000 R9: ff00000000000000 > R10: 00007fff4ad711e0 R11: 0000000000000202 R12: 0000000000000000 > R13: 00007fff4ad71690 R14: 0000000000000003 R15: 0000000000000002 > ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b > > > > struct irq_desc { > irq = 11, > timer_rand_state = 0x0, > kstat_irqs = 0xffff88007f80d598, > handle_irq = 0xffffffff8107bc10 <handle_fasteoi_irq>, > chip = 0xffffffff81825e40, > msi_desc = 0x0, > handler_data = 0x0, > chip_data = 0xffffffff817bd4f0, > action = 0xffff88007efda340, > status = 8406528, > depth = 1, > wake_depth = 0, > irq_count = 0, > last_unhandled = 4294908888, > irqs_unhandled = 0, > lock = { > raw_lock = { > { > head_tail = 2532349678, > tickets = { > head = 38638, > tail = 38640 > } > } > } > }, > affinity = {{ > bits = {3, 0} > }}, > node = 0, > pending_mask = {{ > bits = {0, 0} > }}, > threads_active = { > counter = 0 > }, > wait_for_threads = { > lock = { > raw_lock = { > { > head_tail = 0, > tickets = { > head = 0, > tail = 0 > } > } > } > }, > task_list = { > next = 0xffffffff817b8ae0, > prev = 0xffffffff817b8ae0 > } > }, > dir = 0xffff88007f0045c0, > name = 0xffffffff8171cd20 "fasteoi" > } > > > > thanks > yili ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)" 2014-01-15 8:09 ` Michael S. Tsirkin @ 2014-01-15 8:59 ` 李义 2014-01-15 9:19 ` Michael S. Tsirkin 2014-01-15 23:00 ` Alex Williamson 0 siblings, 2 replies; 5+ messages in thread From: 李义 @ 2014-01-15 8:59 UTC (permalink / raw) To: Michael S. Tsirkin; +Cc: kvm, Alex Williamson >Which OS is this, exactly? >Does this reproduce with a newer guest? the guest kernel (2.6.32.43) is come from the mainline of kernel.org. this issue just happened once at my guest kernel (2.6.32.43). >What uses irq 11? Could you check with lspci before you try to shutdown? # lspci 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 00:03.0 Ethernet controller: Red Hat, Inc Virtio network device 00:04.0 Ethernet controller: Red Hat, Inc Virtio network device 00:05.0 SCSI storage controller: Red Hat, Inc Virtio block device 00:06.0 SCSI storage controller: Red Hat, Inc Virtio block device 00:07.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon # lspci -vv 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) Subsystem: Red Hat, Inc Qemu virtual machine Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] Subsystem: Red Hat, Inc Qemu virtual machine Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] (prog-if 80 [Master]) Subsystem: Red Hat, Inc Qemu virtual machine Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at c100 [size=16] Kernel driver in use: ata_piix 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] (rev 01) (prog-if 00 [UHCI]) Subsystem: Red Hat, Inc Qemu virtual machine Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at c080 [size=32] 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) Subsystem: Red Hat, Inc Qemu virtual machine Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 9 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc Device 1100 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at febf0000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at febe0000 [disabled] [size=64K] 00:03.0 Ethernet controller: Red Hat, Inc Virtio network device Subsystem: Red Hat, Inc Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c0a0 [size=32] Region 1: Memory at febf1000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at feba0000 [disabled] [size=128K] Capabilities: [40] MSI-X: Enable+ Count=3 Masked- Vector table: BAR=1 offset=00000000 PBA: BAR=1 offset=00000800 Kernel driver in use: virtio-pci 00:04.0 Ethernet controller: Red Hat, Inc Virtio network device Subsystem: Red Hat, Inc Device 0001 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c0c0 [size=32] Region 1: Memory at febf2000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at febc0000 [disabled] [size=128K] Capabilities: [40] MSI-X: Enable+ Count=3 Masked- Vector table: BAR=1 offset=00000000 PBA: BAR=1 offset=00000800 Kernel driver in use: virtio-pci 00:05.0 SCSI storage controller: Red Hat, Inc Virtio block device Subsystem: Red Hat, Inc Device 0002 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c000 [size=64] Region 1: Memory at febf3000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] MSI-X: Enable+ Count=2 Masked- Vector table: BAR=1 offset=00000000 PBA: BAR=1 offset=00000800 Kernel driver in use: virtio-pci 00:06.0 SCSI storage controller: Red Hat, Inc Virtio block device Subsystem: Red Hat, Inc Device 0002 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c040 [size=64] Region 1: Memory at febf4000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] MSI-X: Enable+ Count=2 Masked- Vector table: BAR=1 offset=00000000 PBA: BAR=1 offset=00000800 Kernel driver in use: virtio-pci 00:07.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon Subsystem: Red Hat, Inc Device 0005 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c0e0 [size=32] Kernel driver in use: virtio-pc 2014/1/15, Michael S. Tsirkin <mst@redhat.com>: > On Wed, Jan 15, 2014 at 02:48:35PM +0800, 李义 wrote: >> Hi ALL, >> >> i have meet kvm guest os issue at redhat7beta. >> >> Host os: >> iredhat7 Beta >> #virsh version >> Compiled against library: libvirt 1.1.1 >> Using library: libvirt 1.1.1 >> Using API: QEMU 1.1.1 >> Running hypervisor: QEMU 1.5.3 >> >> guest os: >> 2.6.32.43 x86-64 > > Which OS is this, exactly? > Does this reproduce with a newer guest? > >> Problem: >> reboot at the guest os, the guest os will hang.(i have not find the >> reproduce method) >> >> pls: the below is the crash info. >> >> [ 3.446282] Adding 2104504k swap on /dev/vda2. Priority:-1 >> extents:1 across:2104504k >> [ 63.862133] md: stopping all md devices. >> [ 64.960702] ACPI: Preparing to enter system sleep state S5 >> [ 64.961280] Disabling non-boot CPUs ... >> [ 66.370651] irq 11: nobody cared (try booting with the "irqpoll" >> option) > > What uses irq 11? Could you check with lspci before you try to shutdown? > >> [ 66.370656] Pid: 0, comm: swapper Not tainted >> 2.6.32.43_guest-1.0.8.kvmguest-default #1 >> [ 66.370658] Call Trace: >> [ 66.370660] <IRQ> [<ffffffff8107b176>] __report_bad_irq+0x26/0xa0 >> [ 66.370687] [<ffffffff8107b37c>] note_interrupt+0x18c/0x1d0 >> [ 66.370691] [<ffffffff8107bd4d>] handle_fasteoi_irq+0x13d/0x1c0 >> [ 66.370701] [<ffffffff8100ee5d>] handle_irq+0x1d/0x30 >> [ 66.370704] [<ffffffff8100e557>] do_IRQ+0x67/0xe0 >> [ 66.370708] [<ffffffff8100c813>] ret_from_intr+0x0/0x11 >> [ 66.370716] [<ffffffff8104ace3>] ? __do_softirq+0x63/0x140 >> [ 66.370720] [<ffffffff8100cfcc>] ? call_softirq+0x1c/0x30 >> [ 66.370723] [<ffffffff8100ee05>] ? do_softirq+0x65/0xa0 >> [ 66.370725] [<ffffffff8104abbd>] ? irq_exit+0x7d/0x90 >> [ 66.370728] [<ffffffff8100e560>] ? do_IRQ+0x70/0xe0 >> [ 66.370731] [<ffffffff8100c813>] ? ret_from_intr+0x0/0x11 >> [ 66.370732] <EOI> [<ffffffff81025586>] ? native_safe_halt+0x6/0x10 >> [ 66.370747] [<ffffffff81061d65>] ? >> atomic_notifier_call_chain+0x15/0x20 >> [ 66.370753] [<ffffffff81013f27>] ? default_idle+0x27/0x50 >> [ 66.370757] [<ffffffff8100b036>] ? cpu_idle+0x66/0xc0 >> [ 66.370772] [<ffffffff81597545>] ? rest_init+0x75/0x80 >> [ 66.370786] [<ffffffff81840c42>] ? start_kernel+0x2ed/0x2f9 >> [ 66.370790] [<ffffffff818402f4>] ? >> x86_64_start_reservations+0xfb/0xff >> [ 66.370793] [<ffffffff818403f2>] ? x86_64_start_kernel+0xfa/0x109 >> [ 66.370795] handlers: >> [ 66.370796] [<ffffffff8133d7c0>] (vp_interrupt+0x0/0x60) >> [ 66.370810] Disabling IRQ #11 >> >> 进程: >> PID: 1943 TASK: ffff88007da18580 CPU: 0 COMMAND: "halt" >> #0 [ffff88007e8b1b98] schedule at ffffffff815b295d >> #1 [ffff88007e8b1ca0] schedule_timeout at ffffffff815b358e >> #2 [ffff88007e8b1d30] schedule_timeout_uninterruptible at >> ffffffff815b36c9 >> #3 [ffff88007e8b1d40] msleep at ffffffff81050f98 >> #4 [ffff88007e8b1d50] native_cpu_die at ffffffff8101d81c >> #5 [ffff88007e8b1d80] _cpu_down at ffffffff8159840a >> #6 [ffff88007e8b1de0] disable_nonboot_cpus at ffffffff810461f2 >> #7 [ffff88007e8b1e30] kernel_power_off at ffffffff81057321 >> #8 [ffff88007e8b1e40] sys_reboot at ffffffff810575dc >> #9 [ffff88007e8b1f80] system_call_fastpath at ffffffff8100bf02 >> RIP: 00007f2d9c768c66 RSP: 00007fff4ad666f8 RFLAGS: 00010202 >> RAX: 00000000000000a9 RBX: ffffffff8100bf02 RCX: 0000000000000000 >> RDX: 000000004321fedc RSI: 0000000028121969 RDI: fffffffffee1dead >> RBP: 0000000000000003 R8: 0000000000000000 R9: ff00000000000000 >> R10: 00007fff4ad711e0 R11: 0000000000000202 R12: 0000000000000000 >> R13: 00007fff4ad71690 R14: 0000000000000003 R15: 0000000000000002 >> ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b >> >> >> >> struct irq_desc { >> irq = 11, >> timer_rand_state = 0x0, >> kstat_irqs = 0xffff88007f80d598, >> handle_irq = 0xffffffff8107bc10 <handle_fasteoi_irq>, >> chip = 0xffffffff81825e40, >> msi_desc = 0x0, >> handler_data = 0x0, >> chip_data = 0xffffffff817bd4f0, >> action = 0xffff88007efda340, >> status = 8406528, >> depth = 1, >> wake_depth = 0, >> irq_count = 0, >> last_unhandled = 4294908888, >> irqs_unhandled = 0, >> lock = { >> raw_lock = { >> { >> head_tail = 2532349678, >> tickets = { >> head = 38638, >> tail = 38640 >> } >> } >> } >> }, >> affinity = {{ >> bits = {3, 0} >> }}, >> node = 0, >> pending_mask = {{ >> bits = {0, 0} >> }}, >> threads_active = { >> counter = 0 >> }, >> wait_for_threads = { >> lock = { >> raw_lock = { >> { >> head_tail = 0, >> tickets = { >> head = 0, >> tail = 0 >> } >> } >> } >> }, >> task_list = { >> next = 0xffffffff817b8ae0, >> prev = 0xffffffff817b8ae0 >> } >> }, >> dir = 0xffff88007f0045c0, >> name = 0xffffffff8171cd20 "fasteoi" >> } >> >> >> >> thanks >> yili > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)" 2014-01-15 8:59 ` 李义 @ 2014-01-15 9:19 ` Michael S. Tsirkin 2014-01-15 23:00 ` Alex Williamson 1 sibling, 0 replies; 5+ messages in thread From: Michael S. Tsirkin @ 2014-01-15 9:19 UTC (permalink / raw) To: 李义; +Cc: kvm, Alex Williamson On Wed, Jan 15, 2014 at 04:59:45PM +0800, 李义 wrote: > >Which OS is this, exactly? > >Does this reproduce with a newer guest? > > the guest kernel (2.6.32.43) is come from the mainline of kernel.org. > this issue just happened once at my guest kernel (2.6.32.43). Hmm. Could be one of the gazillion bugfixes that happened in one of the drivers since. > >What uses irq 11? Could you check with lspci before you try to shutdown? > > # lspci > 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) > 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] > 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] > 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB > [Natoma/Triton II] (rev 01) > 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) > 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 > 00:03.0 Ethernet controller: Red Hat, Inc Virtio network device > 00:04.0 Ethernet controller: Red Hat, Inc Virtio network device > 00:05.0 SCSI storage controller: Red Hat, Inc Virtio block device > 00:06.0 SCSI storage controller: Red Hat, Inc Virtio block device > 00:07.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon > > # lspci -vv > 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE > [Natoma/Triton II] (prog-if 80 [Master]) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] > Region 4: I/O ports at c100 [size=16] > Kernel driver in use: ata_piix > > 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB > [Natoma/Triton II] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at c080 [size=32] > > 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 9 > > 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00 > [VGA controller]) > Subsystem: Red Hat, Inc Device 1100 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M] > Region 1: Memory at febf0000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at febe0000 [disabled] [size=64K] > > 00:03.0 Ethernet controller: Red Hat, Inc Virtio network device > Subsystem: Red Hat, Inc Device 0001 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at c0a0 [size=32] > Region 1: Memory at febf1000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at feba0000 [disabled] [size=128K] > Capabilities: [40] MSI-X: Enable+ Count=3 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > > 00:04.0 Ethernet controller: Red Hat, Inc Virtio network device > Subsystem: Red Hat, Inc Device 0001 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at c0c0 [size=32] > Region 1: Memory at febf2000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at febc0000 [disabled] [size=128K] > Capabilities: [40] MSI-X: Enable+ Count=3 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > > 00:05.0 SCSI storage controller: Red Hat, Inc Virtio block device > Subsystem: Red Hat, Inc Device 0002 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at c000 [size=64] > Region 1: Memory at febf3000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] MSI-X: Enable+ Count=2 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > > 00:06.0 SCSI storage controller: Red Hat, Inc Virtio block device > Subsystem: Red Hat, Inc Device 0002 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at c040 [size=64] > Region 1: Memory at febf4000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] MSI-X: Enable+ Count=2 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > > 00:07.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon > Subsystem: Red Hat, Inc Device 0005 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at c0e0 [size=32] > Kernel driver in use: virtio-pc So it's probably either the balloon or the usb controller that' creating the problem. Try dropping the balloon from command line, maybe it will go away. -- MST ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)" 2014-01-15 8:59 ` 李义 2014-01-15 9:19 ` Michael S. Tsirkin @ 2014-01-15 23:00 ` Alex Williamson 1 sibling, 0 replies; 5+ messages in thread From: Alex Williamson @ 2014-01-15 23:00 UTC (permalink / raw) To: 李义; +Cc: Michael S. Tsirkin, kvm On Wed, 2014-01-15 at 16:59 +0800, 李义 wrote: > >Which OS is this, exactly? > >Does this reproduce with a newer guest? > > the guest kernel (2.6.32.43) is come from the mainline of kernel.org. > this issue just happened once at my guest kernel (2.6.32.43). What are the options used to start the VM, ex. ps aux | grep qemu What are the kernel options for the guest? Are you using anything like pci=nomsi to disable MSI support on the virtio devices? Thanks, Alex > >What uses irq 11? Could you check with lspci before you try to shutdown? > > # lspci > 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) > 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] > 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] > 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB > [Natoma/Triton II] (rev 01) > 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) > 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 > 00:03.0 Ethernet controller: Red Hat, Inc Virtio network device > 00:04.0 Ethernet controller: Red Hat, Inc Virtio network device > 00:05.0 SCSI storage controller: Red Hat, Inc Virtio block device > 00:06.0 SCSI storage controller: Red Hat, Inc Virtio block device > 00:07.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon > > # lspci -vv > 00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > > 00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE > [Natoma/Triton II] (prog-if 80 [Master]) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] > Region 4: I/O ports at c100 [size=16] > Kernel driver in use: ata_piix > > 00:01.2 USB controller: Intel Corporation 82371SB PIIX3 USB > [Natoma/Triton II] (rev 01) (prog-if 00 [UHCI]) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 11 > Region 4: I/O ports at c080 [size=32] > > 00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) > Subsystem: Red Hat, Inc Qemu virtual machine > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Interrupt: pin A routed to IRQ 9 > > 00:02.0 VGA compatible controller: Cirrus Logic GD 5446 (prog-if 00 > [VGA controller]) > Subsystem: Red Hat, Inc Device 1100 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M] > Region 1: Memory at febf0000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at febe0000 [disabled] [size=64K] > > 00:03.0 Ethernet controller: Red Hat, Inc Virtio network device > Subsystem: Red Hat, Inc Device 0001 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at c0a0 [size=32] > Region 1: Memory at febf1000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at feba0000 [disabled] [size=128K] > Capabilities: [40] MSI-X: Enable+ Count=3 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > > 00:04.0 Ethernet controller: Red Hat, Inc Virtio network device > Subsystem: Red Hat, Inc Device 0001 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at c0c0 [size=32] > Region 1: Memory at febf2000 (32-bit, non-prefetchable) [size=4K] > Expansion ROM at febc0000 [disabled] [size=128K] > Capabilities: [40] MSI-X: Enable+ Count=3 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > > 00:05.0 SCSI storage controller: Red Hat, Inc Virtio block device > Subsystem: Red Hat, Inc Device 0002 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at c000 [size=64] > Region 1: Memory at febf3000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] MSI-X: Enable+ Count=2 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > > 00:06.0 SCSI storage controller: Red Hat, Inc Virtio block device > Subsystem: Red Hat, Inc Device 0002 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at c040 [size=64] > Region 1: Memory at febf4000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [40] MSI-X: Enable+ Count=2 Masked- > Vector table: BAR=1 offset=00000000 > PBA: BAR=1 offset=00000800 > Kernel driver in use: virtio-pci > > 00:07.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon > Subsystem: Red Hat, Inc Device 0005 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at c0e0 [size=32] > Kernel driver in use: virtio-pc > > 2014/1/15, Michael S. Tsirkin <mst@redhat.com>: > > On Wed, Jan 15, 2014 at 02:48:35PM +0800, 李义 wrote: > >> Hi ALL, > >> > >> i have meet kvm guest os issue at redhat7beta. > >> > >> Host os: > >> iredhat7 Beta > >> #virsh version > >> Compiled against library: libvirt 1.1.1 > >> Using library: libvirt 1.1.1 > >> Using API: QEMU 1.1.1 > >> Running hypervisor: QEMU 1.5.3 > >> > >> guest os: > >> 2.6.32.43 x86-64 > > > > Which OS is this, exactly? > > Does this reproduce with a newer guest? > > > >> Problem: > >> reboot at the guest os, the guest os will hang.(i have not find the > >> reproduce method) > >> > >> pls: the below is the crash info. > >> > >> [ 3.446282] Adding 2104504k swap on /dev/vda2. Priority:-1 > >> extents:1 across:2104504k > >> [ 63.862133] md: stopping all md devices. > >> [ 64.960702] ACPI: Preparing to enter system sleep state S5 > >> [ 64.961280] Disabling non-boot CPUs ... > >> [ 66.370651] irq 11: nobody cared (try booting with the "irqpoll" > >> option) > > > > What uses irq 11? Could you check with lspci before you try to shutdown? > > > >> [ 66.370656] Pid: 0, comm: swapper Not tainted > >> 2.6.32.43_guest-1.0.8.kvmguest-default #1 > >> [ 66.370658] Call Trace: > >> [ 66.370660] <IRQ> [<ffffffff8107b176>] __report_bad_irq+0x26/0xa0 > >> [ 66.370687] [<ffffffff8107b37c>] note_interrupt+0x18c/0x1d0 > >> [ 66.370691] [<ffffffff8107bd4d>] handle_fasteoi_irq+0x13d/0x1c0 > >> [ 66.370701] [<ffffffff8100ee5d>] handle_irq+0x1d/0x30 > >> [ 66.370704] [<ffffffff8100e557>] do_IRQ+0x67/0xe0 > >> [ 66.370708] [<ffffffff8100c813>] ret_from_intr+0x0/0x11 > >> [ 66.370716] [<ffffffff8104ace3>] ? __do_softirq+0x63/0x140 > >> [ 66.370720] [<ffffffff8100cfcc>] ? call_softirq+0x1c/0x30 > >> [ 66.370723] [<ffffffff8100ee05>] ? do_softirq+0x65/0xa0 > >> [ 66.370725] [<ffffffff8104abbd>] ? irq_exit+0x7d/0x90 > >> [ 66.370728] [<ffffffff8100e560>] ? do_IRQ+0x70/0xe0 > >> [ 66.370731] [<ffffffff8100c813>] ? ret_from_intr+0x0/0x11 > >> [ 66.370732] <EOI> [<ffffffff81025586>] ? native_safe_halt+0x6/0x10 > >> [ 66.370747] [<ffffffff81061d65>] ? > >> atomic_notifier_call_chain+0x15/0x20 > >> [ 66.370753] [<ffffffff81013f27>] ? default_idle+0x27/0x50 > >> [ 66.370757] [<ffffffff8100b036>] ? cpu_idle+0x66/0xc0 > >> [ 66.370772] [<ffffffff81597545>] ? rest_init+0x75/0x80 > >> [ 66.370786] [<ffffffff81840c42>] ? start_kernel+0x2ed/0x2f9 > >> [ 66.370790] [<ffffffff818402f4>] ? > >> x86_64_start_reservations+0xfb/0xff > >> [ 66.370793] [<ffffffff818403f2>] ? x86_64_start_kernel+0xfa/0x109 > >> [ 66.370795] handlers: > >> [ 66.370796] [<ffffffff8133d7c0>] (vp_interrupt+0x0/0x60) > >> [ 66.370810] Disabling IRQ #11 > >> > >> 进程: > >> PID: 1943 TASK: ffff88007da18580 CPU: 0 COMMAND: "halt" > >> #0 [ffff88007e8b1b98] schedule at ffffffff815b295d > >> #1 [ffff88007e8b1ca0] schedule_timeout at ffffffff815b358e > >> #2 [ffff88007e8b1d30] schedule_timeout_uninterruptible at > >> ffffffff815b36c9 > >> #3 [ffff88007e8b1d40] msleep at ffffffff81050f98 > >> #4 [ffff88007e8b1d50] native_cpu_die at ffffffff8101d81c > >> #5 [ffff88007e8b1d80] _cpu_down at ffffffff8159840a > >> #6 [ffff88007e8b1de0] disable_nonboot_cpus at ffffffff810461f2 > >> #7 [ffff88007e8b1e30] kernel_power_off at ffffffff81057321 > >> #8 [ffff88007e8b1e40] sys_reboot at ffffffff810575dc > >> #9 [ffff88007e8b1f80] system_call_fastpath at ffffffff8100bf02 > >> RIP: 00007f2d9c768c66 RSP: 00007fff4ad666f8 RFLAGS: 00010202 > >> RAX: 00000000000000a9 RBX: ffffffff8100bf02 RCX: 0000000000000000 > >> RDX: 000000004321fedc RSI: 0000000028121969 RDI: fffffffffee1dead > >> RBP: 0000000000000003 R8: 0000000000000000 R9: ff00000000000000 > >> R10: 00007fff4ad711e0 R11: 0000000000000202 R12: 0000000000000000 > >> R13: 00007fff4ad71690 R14: 0000000000000003 R15: 0000000000000002 > >> ORIG_RAX: 00000000000000a9 CS: 0033 SS: 002b > >> > >> > >> > >> struct irq_desc { > >> irq = 11, > >> timer_rand_state = 0x0, > >> kstat_irqs = 0xffff88007f80d598, > >> handle_irq = 0xffffffff8107bc10 <handle_fasteoi_irq>, > >> chip = 0xffffffff81825e40, > >> msi_desc = 0x0, > >> handler_data = 0x0, > >> chip_data = 0xffffffff817bd4f0, > >> action = 0xffff88007efda340, > >> status = 8406528, > >> depth = 1, > >> wake_depth = 0, > >> irq_count = 0, > >> last_unhandled = 4294908888, > >> irqs_unhandled = 0, > >> lock = { > >> raw_lock = { > >> { > >> head_tail = 2532349678, > >> tickets = { > >> head = 38638, > >> tail = 38640 > >> } > >> } > >> } > >> }, > >> affinity = {{ > >> bits = {3, 0} > >> }}, > >> node = 0, > >> pending_mask = {{ > >> bits = {0, 0} > >> }}, > >> threads_active = { > >> counter = 0 > >> }, > >> wait_for_threads = { > >> lock = { > >> raw_lock = { > >> { > >> head_tail = 0, > >> tickets = { > >> head = 0, > >> tail = 0 > >> } > >> } > >> } > >> }, > >> task_list = { > >> next = 0xffffffff817b8ae0, > >> prev = 0xffffffff817b8ae0 > >> } > >> }, > >> dir = 0xffff88007f0045c0, > >> name = 0xffffffff8171cd20 "fasteoi" > >> } > >> > >> > >> > >> thanks > >> yili > > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-01-15 23:39 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2014-01-15 6:48 the reboot will hang at guest os when output "irq 11: nobody cared (try booting with the "irqpoll" option)" 李义 2014-01-15 8:09 ` Michael S. Tsirkin 2014-01-15 8:59 ` 李义 2014-01-15 9:19 ` Michael S. Tsirkin 2014-01-15 23:00 ` Alex Williamson
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox