[PATCH v2 00/13] MIPS: Add mips_paravirt

[PATCH v2 00/13] MIPS: Add mips_paravirt

[Andreas Herrmann]

Hi,

This is v2 of patches to add support for paravirtualized guest on mips
(mips_paravirt). Some of the patches add basic support to run it on
octeon3.

The core of mips_paravirt is David's work.

I've run it using lkvm on a host with KVM MIPS-VZ support (on
octeon3). I've tested guest kernels built for CPU_MIPS64_R2 and
CPU_MIPS32_R2.

When the guest kernel is built for CPU_CAVIUM_OCTEON it requires an
additional patch to avoid usage of octeon_send_ipi_single in
octeon_flush_icache_all_cores. Latest patch for this is not yet
included as it caused a regression and needs some rework.

To built a mips_paravirt guest kernel it's easiest to start with
mips_paravirt_defconfig, check/modify CPU selection (defconfig has
CPU_MIPS64_R2), and kick off kernel built.

Patches are against linux-next/master as of today (next-20140528).
(To make use of __BITFIELD_FIELD macro.)

Diffstat is

 arch/mips/Kbuild.platforms                         |    1 +
 arch/mips/Kconfig                                  |   30 +-
 arch/mips/cavium-octeon/Kconfig                    |   23 +-
 arch/mips/configs/mips_paravirt_defconfig          |  103 ++++++
 arch/mips/include/asm/cpu-features.h               |    9 +-
 arch/mips/include/asm/cpu-type.h                   |    1 +
 arch/mips/include/asm/kvm_para.h                   |   91 +++++
 .../asm/mach-cavium-octeon/cpu-feature-overrides.h |    1 -
 .../asm/mach-paravirt/cpu-feature-overrides.h      |   36 ++
 arch/mips/include/asm/mach-paravirt/irq.h          |   19 +
 .../include/asm/mach-paravirt/kernel-entry-init.h  |   50 +++
 arch/mips/include/asm/mach-paravirt/war.h          |   25 ++
 arch/mips/include/asm/mipsregs.h                   |    9 +
 arch/mips/include/asm/r4kcache.h                   |    2 +
 arch/mips/include/uapi/asm/kvm_para.h              |    6 +-
 arch/mips/kernel/Makefile                          |    2 +-
 arch/mips/kernel/branch.c                          |    6 +-
 arch/mips/kernel/cpu-probe.c                       |    2 +-
 arch/mips/kernel/octeon_switch.S                   |   84 +++--
 arch/mips/kernel/r4k_switch.S                      |    3 +
 arch/mips/math-emu/cp1emu.c                        |    6 +-
 arch/mips/mm/c-r4k.c                               |   48 ++-
 arch/mips/mm/tlbex.c                               |    2 +-
 arch/mips/paravirt/Kconfig                         |    6 +
 arch/mips/paravirt/Makefile                        |   14 +
 arch/mips/paravirt/Platform                        |    9 +
 arch/mips/paravirt/paravirt-irq.c                  |  369 ++++++++++++++++++++
 arch/mips/paravirt/paravirt-smp.c                  |  148 ++++++++
 arch/mips/paravirt/serial.c                        |   40 +++
 arch/mips/paravirt/setup.c                         |   67 ++++
 arch/mips/pci/Makefile                             |    2 +-
 arch/mips/pci/pci-virtio-guest.c                   |  131 +++++++
 include/uapi/linux/kvm_para.h                      |    3 +
 33 files changed, 1295 insertions(+), 53 deletions(-)

Changelog:
v2:
 - Rebased patches on latest linux-next
 - Define hypercalls and HC numbers for MIPS in kvm_para.h header files
 - Misc changes to pci-virtio-guest.c:
   * Make use of __BITFIELD_FIELD macro
   * Calculate IO address for in[lwb] and out[lwb] depending on size
     as usually done throughout the kernel.
   * I still kept this driver version. Once that "Generic
     Configuration Access Mechanism support"
     (https://lkml.org/lkml/2014/5/18/54) is mainline I might have to
     think about how to make use of that instead.
 - Provide minimal defconfig
 - Renaming mips_cpunum to get_ebase_cpunum
 - Provide _machine_halt function with initial patch of paravirt code
   * No _machine_restart so far. I have to look into this separately
     from this initial patch set -- I think it requires additionl
     kvm-tool changes.
 - Fix barriers when booting secondary CPUs
 - Replace check for 64-bit kernel by common macro
 - Remove R4600_HIT_CACHEOP_WAR_IMPL from r4k_blast_dcache_page_dc128()
 - Use switch statement in r4k_blast_dcache_page_setup()]
 - Remove mistakenly introduced config options from patch
  "MIPS: OCTEON: Move CAVIUM_OCTEON_CVMSEG_SIZE to CPU_CAVIUM_OCTEON"
 - Use on_each_cpu unconditionally in irq_core_bus_sync_unlock
 - Misc minor changes after review of v1
 - Remove call to irq_reserve_irq from irq_init_core as linux-next
   contains a patches to remove this function and friends
v1:
 - http://marc.info/?i=1400597236-11352-1-git-send-email-andreas.herrmann@caviumnetworks.com

Comments are welcome.


Thanks,

Andreas

PS: 1, or 2 comments from mailing list after 1st submission are still
not addressed. I'll look into this asap but I thought sending out v2
shouldn't be delayed.

[PATCH v2 01/13] MIPS: OCTEON: Enable use of FPU

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

Some versions of the assembler will not assemble CFC1 for OCTEON, so
override the ISA for these.

Add r4k_fpu.o to handle low level FPU initialization.

Modify octeon_switch.S to save the FPU registers.  And include
r4k_switch.S to pick up more FPU support.

Get rid of "#define cpu_has_fpu		0"

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 .../asm/mach-cavium-octeon/cpu-feature-overrides.h |    1 -
 arch/mips/kernel/Makefile                          |    2 +-
 arch/mips/kernel/branch.c                          |    6 +-
 arch/mips/kernel/octeon_switch.S                   |   84 ++++++++++++++------
 arch/mips/kernel/r4k_switch.S                      |    3 +
 arch/mips/math-emu/cp1emu.c                        |    6 +-
 6 files changed, 75 insertions(+), 27 deletions(-)

diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
index 94ed063..cf80228 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h
@@ -22,7 +22,6 @@
 #define cpu_has_3k_cache	0
 #define cpu_has_4k_cache	0
 #define cpu_has_tx39_cache	0
-#define cpu_has_fpu		0
 #define cpu_has_counter		1
 #define cpu_has_watch		1
 #define cpu_has_divec		1
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 8f8b531..e00a1eb 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -41,7 +41,7 @@ obj-$(CONFIG_CPU_R4K_FPU)	+= r4k_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_R3000)		+= r2300_fpu.o r2300_switch.o
 obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 obj-$(CONFIG_CPU_TX39XX)	+= r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_CAVIUM_OCTEON) += octeon_switch.o
+obj-$(CONFIG_CPU_CAVIUM_OCTEON)	+= r4k_fpu.o octeon_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_SMP_UP)		+= smp-up.o
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 101ab9a..7b2df22 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -562,7 +562,11 @@ int __compute_return_epc_for_insn(struct pt_regs *regs,
 	case cop1_op:
 		preempt_disable();
 		if (is_fpu_owner())
-			asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+			asm volatile(
+				".set push\n"
+				"\t.set mips1\n"
+				"\tcfc1\t%0,$31\n"
+				"\t.set pop" : "=r" (fcr31));
 		else
 			fcr31 = current->thread.fpu.fcr31;
 		preempt_enable();
diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S
index 029e002..f654768 100644
--- a/arch/mips/kernel/octeon_switch.S
+++ b/arch/mips/kernel/octeon_switch.S
@@ -10,24 +10,12 @@
  * Copyright (C) 2000 MIPS Technologies, Inc.
  *    written by Carsten Langgaard, carstenl@mips.com
  */
-#include <asm/asm.h>
-#include <asm/cachectl.h>
-#include <asm/fpregdef.h>
-#include <asm/mipsregs.h>
-#include <asm/asm-offsets.h>
-#include <asm/pgtable-bits.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/thread_info.h>
-
-#include <asm/asmmacro.h>
-
-/*
- * Offset to the current process status flags, the first 32 bytes of the
- * stack are not used.
- */
-#define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
 
+#define USE_ALTERNATE_RESUME_IMPL 1
+	.set push
+	.set arch=mips64r2
+#include "r4k_switch.S"
+	.set pop
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
  *		       struct thread_info *next_ti, int usedfpu)
@@ -40,6 +28,61 @@
 	cpu_save_nonscratch a0
 	LONG_S	ra, THREAD_REG31(a0)
 
+	/*
+	 * check if we need to save FPU registers
+	 */
+	PTR_L	t3, TASK_THREAD_INFO(a0)
+	LONG_L	t0, TI_FLAGS(t3)
+	li	t1, _TIF_USEDFPU
+	and	t2, t0, t1
+	beqz	t2, 1f
+	nor	t1, zero, t1
+
+	and	t0, t0, t1
+	LONG_S	t0, TI_FLAGS(t3)
+
+	/*
+	 * clear saved user stack CU1 bit
+	 */
+	LONG_L	t0, ST_OFF(t3)
+	li	t1, ~ST0_CU1
+	and	t0, t0, t1
+	LONG_S	t0, ST_OFF(t3)
+
+	.set push
+	.set arch=mips64r2
+	fpu_save_double a0 t0 t1		# c0_status passed in t0
+						# clobbers t1
+	.set pop
+1:
+
+	/* check if we need to save COP2 registers */
+	PTR_L	t2, TASK_THREAD_INFO(a0)
+	LONG_L	t0, ST_OFF(t2)
+	bbit0	t0, 30, 1f
+
+	/* Disable COP2 in the stored process state */
+	li	t1, ST0_CU2
+	xor	t0, t1
+	LONG_S	t0, ST_OFF(t2)
+
+	/* Enable COP2 so we can save it */
+	mfc0	t0, CP0_STATUS
+	or	t0, t1
+	mtc0	t0, CP0_STATUS
+
+	/* Save COP2 */
+	daddu	a0, THREAD_CP2
+	jal octeon_cop2_save
+	dsubu	a0, THREAD_CP2
+
+	/* Disable COP2 now that we are done */
+	mfc0	t0, CP0_STATUS
+	li	t1, ST0_CU2
+	xor	t0, t1
+	mtc0	t0, CP0_STATUS
+
+1:
 #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0
 	/* Check if we need to store CVMSEG state */
 	mfc0	t0, $11,7	/* CvmMemCtl */
@@ -85,12 +128,7 @@
 	move	$28, a2
 	cpu_restore_nonscratch a1
 
-#if (_THREAD_SIZE - 32) < 0x8000
-	PTR_ADDIU	t0, $28, _THREAD_SIZE - 32
-#else
-	PTR_LI		t0, _THREAD_SIZE - 32
-	PTR_ADDU	t0, $28
-#endif
+	PTR_ADDU	t0, $28, _THREAD_SIZE - 32
 	set_saved_sp	t0, t1, t2
 
 	mfc0	t1, CP0_STATUS		/* Do we really need this? */
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 547c522..81ca3f7 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -28,6 +28,7 @@
  */
 #define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS)
 
+#ifndef USE_ALTERNATE_RESUME_IMPL
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
  *		       struct thread_info *next_ti, s32 fp_save)
@@ -99,6 +100,8 @@
 	jr	ra
 	END(resume)
 
+#endif /* USE_ALTERNATE_RESUME_IMPL */
+
 /*
  * Save a thread's fp context.
  */
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 08e6a74..5afda3c 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -584,7 +584,11 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
 		if (insn.i_format.rs == bc_op) {
 			preempt_disable();
 			if (is_fpu_owner())
-				asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+				asm volatile(
+					".set push\n"
+					"\t.set mips1\n"
+					"\tcfc1\t%0,$31\n"
+					"\t.set pop" : "=r" (fcr31));
 			else
 				fcr31 = current->thread.fpu.fcr31;
 			preempt_enable();
-- 
1.7.9.5

[PATCH v2 02/13] MIPS: Move system level config items from CPU_CAVIUM_OCTEON to CAVIUM_OCTEON_SOC

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

They are a property of the SoC not the CPU itself.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/Kconfig |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 125edd4..d540945 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -730,6 +730,11 @@ config CAVIUM_OCTEON_SOC
 	select ZONE_DMA32
 	select HOLES_IN_ZONE
 	select ARCH_REQUIRE_GPIOLIB
+	select LIBFDT
+	select USE_OF
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_SUPPORTS_SMP
+	select NR_CPUS_DEFAULT_16
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -1408,16 +1413,11 @@ config CPU_SB1
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
 	depends on SYS_HAS_CPU_CAVIUM_OCTEON
-	select ARCH_SPARSEMEM_ENABLE
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_SMP
-	select NR_CPUS_DEFAULT_16
 	select WEAK_ORDERING
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
-	select LIBFDT
-	select USE_OF
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select MIPS_L1_CACHE_SHIFT_7
 	help
-- 
1.7.9.5

[PATCH v2 03/13] MIPS: OCTEON: Move CAVIUM_OCTEON_CVMSEG_SIZE to CPU_CAVIUM_OCTEON

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

CVMSEG is related to the CPU core not the SoC system.  So needs to be
configurable there.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/cavium-octeon/Kconfig |   23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig
index 227705d..6028666 100644
--- a/arch/mips/cavium-octeon/Kconfig
+++ b/arch/mips/cavium-octeon/Kconfig
@@ -10,6 +10,17 @@ config CAVIUM_CN63XXP1
 	  non-CN63XXP1 hardware, so it is recommended to select "n"
 	  unless it is known the workarounds are needed.
 
+config CAVIUM_OCTEON_CVMSEG_SIZE
+	int "Number of L1 cache lines reserved for CVMSEG memory"
+	range 0 54
+	default 1
+	help
+	  CVMSEG LM is a segment that accesses portions of the dcache as a
+	  local memory; the larger CVMSEG is, the smaller the cache is.
+	  This selects the size of CVMSEG LM, which is in cache blocks. The
+	  legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
+	  between zero and 6192 bytes).
+
 endif # CPU_CAVIUM_OCTEON
 
 if CAVIUM_OCTEON_SOC
@@ -23,17 +34,6 @@ config CAVIUM_OCTEON_2ND_KERNEL
 	  with this option to be run at the same time as one built without this
 	  option.
 
-config CAVIUM_OCTEON_CVMSEG_SIZE
-	int "Number of L1 cache lines reserved for CVMSEG memory"
-	range 0 54
-	default 1
-	help
-	  CVMSEG LM is a segment that accesses portions of the dcache as a
-	  local memory; the larger CVMSEG is, the smaller the cache is.
-	  This selects the size of CVMSEG LM, which is in cache blocks. The
-	  legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
-	  between zero and 6192 bytes).
-
 config CAVIUM_OCTEON_LOCK_L2
 	bool "Lock often used kernel code in the L2"
 	default "y"
@@ -86,7 +86,6 @@ config SWIOTLB
 	select IOMMU_HELPER
 	select NEED_SG_DMA_LENGTH
 
-
 config OCTEON_ILM
 	tristate "Module to measure interrupt latency using Octeon CIU Timer"
 	help
-- 
1.7.9.5

[PATCH v2 04/13] MIPS: Don't use RI/XI with 32-bit kernels on 64-bit CPUs

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

The TLB handlers cannot handle this case, so disable it for now.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/include/asm/cpu-features.h |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index f75dd70..c7d8c99 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -110,9 +110,15 @@
 #ifndef cpu_has_smartmips
 #define cpu_has_smartmips	(cpu_data[0].ases & MIPS_ASE_SMARTMIPS)
 #endif
+
 #ifndef cpu_has_rixi
-#define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
+# ifdef CONFIG_64BIT
+# define cpu_has_rixi		(cpu_data[0].options & MIPS_CPU_RIXI)
+# else /* CONFIG_32BIT */
+# define cpu_has_rixi		((cpu_data[0].options & MIPS_CPU_RIXI) && !cpu_has_64bits)
+# endif
 #endif
+
 #ifndef cpu_has_mmips
 # ifdef CONFIG_SYS_SUPPORTS_MICROMIPS
 #  define cpu_has_mmips		(cpu_data[0].options & MIPS_CPU_MICROMIPS)
@@ -120,6 +126,7 @@
 #  define cpu_has_mmips		0
 # endif
 #endif
+
 #ifndef cpu_has_vtag_icache
 #define cpu_has_vtag_icache	(cpu_data[0].icache.flags & MIPS_CACHE_VTAG)
 #endif
-- 
1.7.9.5

[PATCH v2 05/13] MIPS: Don't build fast TLB refill handler with 32-bit kernels

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

The fast handler only supports 64-bit kernels.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/mm/tlbex.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index f99ec587..af91f3e 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1250,13 +1250,17 @@ static void build_r4000_tlb_refill_handler(void)
 	unsigned int final_len;
 	struct mips_huge_tlb_info htlb_info __maybe_unused;
 	enum vmalloc64_mode vmalloc_mode __maybe_unused;
-
+#ifdef CONFIG_64BIT
+	bool is64bit = true;
+#else
+	bool is64bit = false;
+#endif
 	memset(tlb_handler, 0, sizeof(tlb_handler));
 	memset(labels, 0, sizeof(labels));
 	memset(relocs, 0, sizeof(relocs));
 	memset(final_handler, 0, sizeof(final_handler));
 
-	if ((scratch_reg >= 0 || scratchpad_available()) && use_bbit_insns()) {
+	if (is64bit && (scratch_reg >= 0 || scratchpad_available()) && use_bbit_insns()) {
 		htlb_info = build_fast_tlb_refill_handler(&p, &l, &r, K0, K1,
 							  scratch_reg);
 		vmalloc_mode = refill_scratch;
-- 
1.7.9.5

[PATCH v2 06/13] MIPS: Add minimal support for OCTEON3 to c-r4k.c

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

These are needed to boot a generic mips64r2 kernel on OCTEONIII.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/include/asm/r4kcache.h |    2 ++
 arch/mips/mm/c-r4k.c             |   48 ++++++++++++++++++++++++++++++++++----
 2 files changed, 46 insertions(+), 4 deletions(-)

[andreas.herrmann:
  * Remove R4600_HIT_CACHEOP_WAR_IMPL from r4k_blast_dcache_page_dc128()
  * Use switch statement in r4k_blast_dcache_page_setup()]

diff --git a/arch/mips/include/asm/r4kcache.h b/arch/mips/include/asm/r4kcache.h
index fe8d1b6..0b8bd28 100644
--- a/arch/mips/include/asm/r4kcache.h
+++ b/arch/mips/include/asm/r4kcache.h
@@ -523,6 +523,8 @@ __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32,
 __BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
 __BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
 __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
 __BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
 
 __BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 5c21282..3eb7270 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -108,18 +108,34 @@ static inline void r4k_blast_dcache_page_dc64(unsigned long addr)
 	blast_dcache64_page(addr);
 }
 
+static inline void r4k_blast_dcache_page_dc128(unsigned long addr)
+{
+	blast_dcache128_page(addr);
+}
+
 static void r4k_blast_dcache_page_setup(void)
 {
 	unsigned long  dc_lsize = cpu_dcache_line_size();
 
-	if (dc_lsize == 0)
+	switch (dc_lsize) {
+	case 0:
 		r4k_blast_dcache_page = (void *)cache_noop;
-	else if (dc_lsize == 16)
+		break;
+	case 16:
 		r4k_blast_dcache_page = blast_dcache16_page;
-	else if (dc_lsize == 32)
+		break;
+	case 32:
 		r4k_blast_dcache_page = r4k_blast_dcache_page_dc32;
-	else if (dc_lsize == 64)
+		break;
+	case 64:
 		r4k_blast_dcache_page = r4k_blast_dcache_page_dc64;
+		break;
+	case 128:
+		r4k_blast_dcache_page = r4k_blast_dcache_page_dc128;
+		break;
+	default:
+		break;
+	}
 }
 
 #ifndef CONFIG_EVA
@@ -158,6 +174,8 @@ static void r4k_blast_dcache_page_indexed_setup(void)
 		r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
 	else if (dc_lsize == 64)
 		r4k_blast_dcache_page_indexed = blast_dcache64_page_indexed;
+	else if (dc_lsize == 128)
+		r4k_blast_dcache_page_indexed = blast_dcache128_page_indexed;
 }
 
 void (* r4k_blast_dcache)(void);
@@ -175,6 +193,8 @@ static void r4k_blast_dcache_setup(void)
 		r4k_blast_dcache = blast_dcache32;
 	else if (dc_lsize == 64)
 		r4k_blast_dcache = blast_dcache64;
+	else if (dc_lsize == 128)
+		r4k_blast_dcache = blast_dcache128;
 }
 
 /* force code alignment (used for TX49XX_ICACHE_INDEX_INV_WAR) */
@@ -264,6 +284,8 @@ static void r4k_blast_icache_page_setup(void)
 		r4k_blast_icache_page = blast_icache32_page;
 	else if (ic_lsize == 64)
 		r4k_blast_icache_page = blast_icache64_page;
+	else if (ic_lsize == 128)
+		r4k_blast_icache_page = blast_icache128_page;
 }
 
 #ifndef CONFIG_EVA
@@ -337,6 +359,8 @@ static void r4k_blast_icache_setup(void)
 			r4k_blast_icache = blast_icache32;
 	} else if (ic_lsize == 64)
 		r4k_blast_icache = blast_icache64;
+	else if (ic_lsize == 128)
+		r4k_blast_icache = blast_icache128;
 }
 
 static void (* r4k_blast_scache_page)(unsigned long addr);
@@ -1093,6 +1117,21 @@ static void probe_pcache(void)
 		c->dcache.waybit = 0;
 		break;
 
+	case CPU_CAVIUM_OCTEON3:
+		/* For now lie about the number of ways. */
+		c->icache.linesz = 128;
+		c->icache.sets = 16;
+		c->icache.ways = 8;
+		c->icache.flags |= MIPS_CACHE_VTAG;
+		icache_size = c->icache.sets * c->icache.ways * c->icache.linesz;
+
+		c->dcache.linesz = 128;
+		c->dcache.ways = 8;
+		c->dcache.sets = 8;
+		dcache_size = c->dcache.sets * c->dcache.ways * c->dcache.linesz;
+		c->options |= MIPS_CPU_PREFETCH;
+		break;
+
 	default:
 		if (!(config & MIPS_CONF_M))
 			panic("Don't know how to probe P-caches on this cpu.");
@@ -1413,6 +1452,7 @@ static void setup_scache(void)
 		loongson3_sc_init();
 		return;
 
+	case CPU_CAVIUM_OCTEON3:
 	case CPU_XLP:
 		/* don't need to worry about L2, fully coherent */
 		return;
-- 
1.7.9.5

[PATCH v2 07/13] MIPS: Add function get_ebase_cpunum

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

This returns the CPUNum from the low order Ebase bits.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/include/asm/mipsregs.h |    9 +++++++++
 arch/mips/kernel/cpu-probe.c     |    2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

[andreas.herrmann:
  * Renamed function from mips_cpunum
  * Make use of function in cpu-probe.c]

diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index fb2d174..98e9754 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1792,6 +1792,15 @@ __BUILD_SET_C0(brcm_cmt_ctrl)
 __BUILD_SET_C0(brcm_config)
 __BUILD_SET_C0(brcm_mode)
 
+/*
+ * Return low 10 bits of ebase.
+ * Note that under KVM (MIPSVZ) this returns vcpu id.
+ */
+static inline unsigned int get_ebase_cpunum(void)
+{
+	return read_c0_ebase() & 0x3ff;
+}
+
 #endif /* !__ASSEMBLY__ */
 
 #endif /* _ASM_MIPSREGS_H */
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index e8638c5..dfc6f62 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -423,7 +423,7 @@ static void decode_configs(struct cpuinfo_mips *c)
 
 #ifndef CONFIG_MIPS_CPS
 	if (cpu_has_mips_r2) {
-		c->core = read_c0_ebase() & 0x3ff;
+		c->core = get_ebase_cpunum();
 		if (cpu_has_mipsmt)
 			c->core >>= fls(core_nvpes()) - 1;
 	}
-- 
1.7.9.5

[PATCH v2 08/13] MIPS: OCTEON: Add OCTEON3 to __get_cpu_type

[Andreas Herrmann]

Otherwise __builtin_unreachable might be called.

Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/include/asm/cpu-type.h |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/mips/include/asm/cpu-type.h b/arch/mips/include/asm/cpu-type.h
index e3308b4..b4e2bd8 100644
--- a/arch/mips/include/asm/cpu-type.h
+++ b/arch/mips/include/asm/cpu-type.h
@@ -163,6 +163,7 @@ static inline int __pure __get_cpu_type(const int cpu_type)
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 	case CPU_CAVIUM_OCTEON2:
+	case CPU_CAVIUM_OCTEON3:
 #endif
 
 #if defined(CONFIG_SYS_HAS_CPU_BMIPS32_3300) || \
-- 
1.7.9.5

[PATCH v2 09/13] MIPS: Add functions for hypervisor call

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

Introduce kvm_hypercall[0-3].
Define three new hypercalls for MIPS: GET_CLOCK_FREQ, EXIT_VM, and
CONSOLE_OUTPUT.

[andreas.herrmann:
  * Properly define hypercalls and HC numbers for MIPS
    in kvm_para.h header files]

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/include/asm/kvm_para.h      |   91 +++++++++++++++++++++++++++++++++
 arch/mips/include/uapi/asm/kvm_para.h |    6 ++-
 include/uapi/linux/kvm_para.h         |    3 ++
 3 files changed, 99 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/include/asm/kvm_para.h

diff --git a/arch/mips/include/asm/kvm_para.h b/arch/mips/include/asm/kvm_para.h
new file mode 100644
index 0000000..e559812
--- /dev/null
+++ b/arch/mips/include/asm/kvm_para.h
@@ -0,0 +1,91 @@
+#ifndef _ASM_MIPS_KVM_PARA_H
+#define _ASM_MIPS_KVM_PARA_H
+
+#include <uapi/asm/kvm_para.h>
+
+#define KVM_HYPERCALL ".word 0x42000028"
+
+/*
+ * Hypercalls for KVM.
+ *
+ * Hypercall number is passed in v0.
+ * Return value will be placed in v0.
+ * Up to 3 arguments are passed in a0, a1, and a2.
+ */
+static inline unsigned long kvm_hypercall0(unsigned long num)
+{
+	register unsigned long n asm("v0");
+	register unsigned long r asm("v0");
+
+	n = num;
+	__asm__ __volatile__(
+		KVM_HYPERCALL
+		: "=r" (r) : "r" (n) : "memory"
+		);
+
+	return r;
+}
+
+static inline unsigned long kvm_hypercall1(unsigned long num,
+					unsigned long arg0)
+{
+	register unsigned long n asm("v0");
+	register unsigned long r asm("v0");
+	register unsigned long a0 asm("a0");
+
+	n = num;
+	a0 = arg0;
+	__asm__ __volatile__(
+		KVM_HYPERCALL
+		: "=r" (r) : "r" (n), "r" (a0) : "memory"
+		);
+
+	return r;
+}
+
+static inline unsigned long kvm_hypercall2(unsigned long num,
+					unsigned long arg0, unsigned long arg1)
+{
+	register unsigned long n asm("v0");
+	register unsigned long r asm("v0");
+	register unsigned long a0 asm("a0");
+	register unsigned long a1 asm("a1");
+
+	n = num;
+	a0 = arg0;
+	a1 = arg1;
+	__asm__ __volatile__(
+		KVM_HYPERCALL
+		: "=r" (r) : "r" (n), "r" (a0), "r" (a1) : "memory"
+		);
+
+	return r;
+}
+
+static inline unsigned long kvm_hypercall3(unsigned long num,
+	unsigned long arg0, unsigned long arg1, unsigned long arg2)
+{
+	register unsigned long n asm("v0");
+	register unsigned long r asm("v0");
+	register unsigned long a0 asm("a0");
+	register unsigned long a1 asm("a1");
+	register unsigned long a2 asm("a2");
+
+	n = num;
+	a0 = arg0;
+	a1 = arg1;
+	a2 = arg2;
+	__asm__ __volatile__(
+		KVM_HYPERCALL
+		: "=r" (r) : "r" (n), "r" (a0), "r" (a1), "r" (a2) : "memory"
+		);
+
+	return r;
+}
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#endif /* _ASM_MIPS_KVM_PARA_H */
diff --git a/arch/mips/include/uapi/asm/kvm_para.h b/arch/mips/include/uapi/asm/kvm_para.h
index 14fab8f..7e16d7c 100644
--- a/arch/mips/include/uapi/asm/kvm_para.h
+++ b/arch/mips/include/uapi/asm/kvm_para.h
@@ -1 +1,5 @@
-#include <asm-generic/kvm_para.h>
+#ifndef _UAPI_ASM_MIPS_KVM_PARA_H
+#define _UAPI_ASM_MIPS_KVM_PARA_H
+
+
+#endif /* _UAPI_ASM_MIPS_KVM_PARA_H */
diff --git a/include/uapi/linux/kvm_para.h b/include/uapi/linux/kvm_para.h
index 2841f86..bf6cd7d 100644
--- a/include/uapi/linux/kvm_para.h
+++ b/include/uapi/linux/kvm_para.h
@@ -20,6 +20,9 @@
 #define KVM_HC_FEATURES			3
 #define KVM_HC_PPC_MAP_MAGIC_PAGE	4
 #define KVM_HC_KICK_CPU			5
+#define KVM_HC_MIPS_GET_CLOCK_FREQ	6
+#define KVM_HC_MIPS_EXIT_VM		7
+#define KVM_HC_MIPS_CONSOLE_OUTPUT	8
 
 /*
  * hypercalls use architecture specific
-- 
1.7.9.5

[PATCH v2 10/13] MIPS: Add code for new system 'paravirt'

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

For para-virtualized guests running under KVM or other equivalent
hypervisor.

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 .../asm/mach-paravirt/cpu-feature-overrides.h      |   36 ++
 arch/mips/include/asm/mach-paravirt/irq.h          |   19 +
 .../include/asm/mach-paravirt/kernel-entry-init.h  |   50 +++
 arch/mips/include/asm/mach-paravirt/war.h          |   25 ++
 arch/mips/mm/tlbex.c                               |    8 +-
 arch/mips/paravirt/Makefile                        |   14 +
 arch/mips/paravirt/Platform                        |    9 +
 arch/mips/paravirt/paravirt-irq.c                  |  369 ++++++++++++++++++++
 arch/mips/paravirt/paravirt-smp.c                  |  148 ++++++++
 arch/mips/paravirt/serial.c                        |   40 +++
 arch/mips/paravirt/setup.c                         |   67 ++++
 11 files changed, 779 insertions(+), 6 deletions(-)
 create mode 100644 arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h
 create mode 100644 arch/mips/include/asm/mach-paravirt/irq.h
 create mode 100644 arch/mips/include/asm/mach-paravirt/kernel-entry-init.h
 create mode 100644 arch/mips/include/asm/mach-paravirt/war.h
 create mode 100644 arch/mips/paravirt/Makefile
 create mode 100644 arch/mips/paravirt/Platform
 create mode 100644 arch/mips/paravirt/paravirt-irq.c
 create mode 100644 arch/mips/paravirt/paravirt-smp.c
 create mode 100644 arch/mips/paravirt/serial.c
 create mode 100644 arch/mips/paravirt/setup.c

[andreas.herrmann:
  * Adaptions after renaming of mips_cpunum to get_ebase_cpunum
  * Provide _machine_halt function to exit VM on shutdown of guest
  * Adapt serial.c and setup.c to use new hypercalls and HC numbers
  * Fix barriers when booting secondary CPUs
  * Replace check for 64-bit kernel by common macro
  * Remove call to irq_reserve_irq from irq_init_core
    The function was removed (linux-next) see
    - commit 1d008353ba088fdec0b2a944e140ff9154a5fb20
      (genirq: Remove irq_reserve_irq[s])
    - commit f63b6a05f2b11537612266a8b27a61f412344a1d
      (genirq: Replace reserve_irqs in core code)
    - commit be4034016c11f8913d38fccf692007fab1c50be1
      (s390: Avoid call to irq_reserve_irqs())
    Not reserving unused irqs shouldn't hurt.
  * Use on_each_cpu unconditionally in irq_core_bus_sync_unlock]
  * Misc other minor changes after review of v1]

diff --git a/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h b/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h
new file mode 100644
index 0000000..725e1ed
--- /dev/null
+++ b/arch/mips/include/asm/mach-paravirt/cpu-feature-overrides.h
@@ -0,0 +1,36 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+#ifndef __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_has_4kex		1
+#define cpu_has_3k_cache	0
+#define cpu_has_tx39_cache	0
+#define cpu_has_counter		1
+#define cpu_has_llsc		1
+/*
+ * We Disable LL/SC on non SMP systems as it is faster to disable
+ * interrupts for atomic access than a LL/SC.
+ */
+#ifdef CONFIG_SMP
+# define kernel_uses_llsc	1
+#else
+# define kernel_uses_llsc	0
+#endif
+
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+#define cpu_dcache_line_size()	128
+#define cpu_icache_line_size()	128
+#define cpu_has_octeon_cache	1
+#define cpu_has_4k_cache	0
+#else
+#define cpu_has_octeon_cache	0
+#define cpu_has_4k_cache	1
+#endif
+
+#endif /* __ASM_MACH_PARAVIRT_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-paravirt/irq.h b/arch/mips/include/asm/mach-paravirt/irq.h
new file mode 100644
index 0000000..9b4d35e
--- /dev/null
+++ b/arch/mips/include/asm/mach-paravirt/irq.h
@@ -0,0 +1,19 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+#ifndef __ASM_MACH_PARAVIRT_IRQ_H__
+#define  __ASM_MACH_PARAVIRT_IRQ_H__
+
+#define NR_IRQS 64
+#define MIPS_CPU_IRQ_BASE 1
+
+#define MIPS_IRQ_PCIA (MIPS_CPU_IRQ_BASE + 8)
+
+#define MIPS_IRQ_MBOX0 (MIPS_CPU_IRQ_BASE + 32)
+#define MIPS_IRQ_MBOX1 (MIPS_CPU_IRQ_BASE + 33)
+
+#endif /* __ASM_MACH_PARAVIRT_IRQ_H__ */
diff --git a/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h b/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h
new file mode 100644
index 0000000..2f82bfa
--- /dev/null
+++ b/arch/mips/include/asm/mach-paravirt/kernel-entry-init.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc
+ */
+#ifndef __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H
+#define __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H
+
+#define CP0_EBASE $15, 1
+
+	.macro  kernel_entry_setup
+	mfc0	t0, CP0_EBASE
+	andi	t0, t0, 0x3ff		# CPUNum
+	beqz	t0, 1f
+	# CPUs other than zero goto smp_bootstrap
+	j	smp_bootstrap
+
+1:
+	.endm
+
+/*
+ * Do SMP slave processor setup necessary before we can safely execute
+ * C code.
+ */
+	.macro  smp_slave_setup
+	mfc0	t0, CP0_EBASE
+	andi	t0, t0, 0x3ff		# CPUNum
+	slti	t1, t0, NR_CPUS
+	bnez	t1, 1f
+2:
+	di
+	wait
+	b	2b			# Unknown CPU, loop forever.
+1:
+	PTR_LA	t1, paravirt_smp_sp
+	PTR_SLL	t0, PTR_SCALESHIFT
+	PTR_ADDU t1, t1, t0
+3:
+	PTR_L	sp, 0(t1)
+	beqz	sp, 3b			# Spin until told to proceed.
+
+	PTR_LA	t1, paravirt_smp_gp
+	PTR_ADDU t1, t1, t0
+	sync
+	PTR_L	gp, 0(t1)
+	.endm
+
+#endif /* __ASM_MACH_PARAVIRT_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-paravirt/war.h b/arch/mips/include/asm/mach-paravirt/war.h
new file mode 100644
index 0000000..36d3afb
--- /dev/null
+++ b/arch/mips/include/asm/mach-paravirt/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2013 Cavium Networks <support@caviumnetworks.com>
+ */
+#ifndef __ASM_MIPS_MACH_PARAVIRT_WAR_H
+#define __ASM_MIPS_MACH_PARAVIRT_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR	0
+#define R4600_V1_HIT_CACHEOP_WAR	0
+#define R4600_V2_HIT_CACHEOP_WAR	0
+#define R5432_CP0_INTERRUPT_WAR		0
+#define BCM1250_M3_WAR			0
+#define SIBYTE_1956_WAR			0
+#define MIPS4K_ICACHE_REFILL_WAR	0
+#define MIPS_CACHE_SYNC_WAR		0
+#define TX49XX_ICACHE_INDEX_INV_WAR	0
+#define ICACHE_REFILLS_WORKAROUND_WAR	0
+#define R10000_LLSC_WAR			0
+#define MIPS34K_MISSED_ITLB_WAR		0
+
+#endif /* __ASM_MIPS_MACH_PARAVIRT_WAR_H */
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index af91f3e..e80e10b 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -1250,17 +1250,13 @@ static void build_r4000_tlb_refill_handler(void)
 	unsigned int final_len;
 	struct mips_huge_tlb_info htlb_info __maybe_unused;
 	enum vmalloc64_mode vmalloc_mode __maybe_unused;
-#ifdef CONFIG_64BIT
-	bool is64bit = true;
-#else
-	bool is64bit = false;
-#endif
+
 	memset(tlb_handler, 0, sizeof(tlb_handler));
 	memset(labels, 0, sizeof(labels));
 	memset(relocs, 0, sizeof(relocs));
 	memset(final_handler, 0, sizeof(final_handler));
 
-	if (is64bit && (scratch_reg >= 0 || scratchpad_available()) && use_bbit_insns()) {
+	if (IS_ENABLED(CONFIG_64BIT) && (scratch_reg >= 0 || scratchpad_available()) && use_bbit_insns()) {
 		htlb_info = build_fast_tlb_refill_handler(&p, &l, &r, K0, K1,
 							  scratch_reg);
 		vmalloc_mode = refill_scratch;
diff --git a/arch/mips/paravirt/Makefile b/arch/mips/paravirt/Makefile
new file mode 100644
index 0000000..5023af7
--- /dev/null
+++ b/arch/mips/paravirt/Makefile
@@ -0,0 +1,14 @@
+#
+# Makefile for MIPS para-virtualized specific kernel interface routines
+# under Linux.
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2013 Cavium, Inc.
+#
+
+obj-y := setup.o serial.o paravirt-irq.o
+
+obj-$(CONFIG_SMP)		+= paravirt-smp.o
diff --git a/arch/mips/paravirt/Platform b/arch/mips/paravirt/Platform
new file mode 100644
index 0000000..c3901fa
--- /dev/null
+++ b/arch/mips/paravirt/Platform
@@ -0,0 +1,9 @@
+#
+# Generic para-virtualized guest.
+#
+platform-$(CONFIG_MIPS_PARAVIRT)	+= paravirt/
+cflags-$(CONFIG_MIPS_PARAVIRT)		+=				\
+		-I$(srctree)/arch/mips/include/asm/mach-paravirt
+
+load-$(CONFIG_MIPS_PARAVIRT)	= 0xffffffff80010000
+
diff --git a/arch/mips/paravirt/paravirt-irq.c b/arch/mips/paravirt/paravirt-irq.c
new file mode 100644
index 0000000..f4d3247
--- /dev/null
+++ b/arch/mips/paravirt/paravirt-irq.c
@@ -0,0 +1,369 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+
+#include <asm/io.h>
+
+#define MBOX_BITS_PER_CPU 2
+
+static int cpunum_for_cpu(int cpu)
+{
+#ifdef CONFIG_SMP
+	return cpu_logical_map(cpu);
+#else
+	return get_ebase_cpunum();
+#endif
+}
+
+struct core_chip_data {
+	struct mutex core_irq_mutex;
+	bool current_en;
+	bool desired_en;
+	u8 bit;
+};
+
+static struct core_chip_data irq_core_chip_data[8];
+
+static void irq_core_ack(struct irq_data *data)
+{
+	struct core_chip_data *cd = irq_data_get_irq_chip_data(data);
+	unsigned int bit = cd->bit;
+
+	/*
+	 * We don't need to disable IRQs to make these atomic since
+	 * they are already disabled earlier in the low level
+	 * interrupt code.
+	 */
+	clear_c0_status(0x100 << bit);
+	/* The two user interrupts must be cleared manually. */
+	if (bit < 2)
+		clear_c0_cause(0x100 << bit);
+}
+
+static void irq_core_eoi(struct irq_data *data)
+{
+	struct core_chip_data *cd = irq_data_get_irq_chip_data(data);
+
+	/*
+	 * We don't need to disable IRQs to make these atomic since
+	 * they are already disabled earlier in the low level
+	 * interrupt code.
+	 */
+	set_c0_status(0x100 << cd->bit);
+}
+
+static void irq_core_set_enable_local(void *arg)
+{
+	struct irq_data *data = arg;
+	struct core_chip_data *cd = irq_data_get_irq_chip_data(data);
+	unsigned int mask = 0x100 << cd->bit;
+
+	/*
+	 * Interrupts are already disabled, so these are atomic.
+	 */
+	if (cd->desired_en)
+		set_c0_status(mask);
+	else
+		clear_c0_status(mask);
+
+}
+
+static void irq_core_disable(struct irq_data *data)
+{
+	struct core_chip_data *cd = irq_data_get_irq_chip_data(data);
+	cd->desired_en = false;
+}
+
+static void irq_core_enable(struct irq_data *data)
+{
+	struct core_chip_data *cd = irq_data_get_irq_chip_data(data);
+	cd->desired_en = true;
+}
+
+static void irq_core_bus_lock(struct irq_data *data)
+{
+	struct core_chip_data *cd = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&cd->core_irq_mutex);
+}
+
+static void irq_core_bus_sync_unlock(struct irq_data *data)
+{
+	struct core_chip_data *cd = irq_data_get_irq_chip_data(data);
+
+	if (cd->desired_en != cd->current_en) {
+		on_each_cpu(irq_core_set_enable_local, data, 1);
+		cd->current_en = cd->desired_en;
+	}
+
+	mutex_unlock(&cd->core_irq_mutex);
+}
+
+static struct irq_chip irq_chip_core = {
+	.name = "Core",
+	.irq_enable = irq_core_enable,
+	.irq_disable = irq_core_disable,
+	.irq_ack = irq_core_ack,
+	.irq_eoi = irq_core_eoi,
+	.irq_bus_lock = irq_core_bus_lock,
+	.irq_bus_sync_unlock = irq_core_bus_sync_unlock,
+
+	.irq_cpu_online = irq_core_eoi,
+	.irq_cpu_offline = irq_core_ack,
+	.flags = IRQCHIP_ONOFFLINE_ENABLED,
+};
+
+static void __init irq_init_core(void)
+{
+	int i;
+	int irq;
+	struct core_chip_data *cd;
+
+	/* Start with a clean slate */
+	clear_c0_status(ST0_IM);
+	clear_c0_cause(CAUSEF_IP0 | CAUSEF_IP1);
+
+	for (i = 0; i < ARRAY_SIZE(irq_core_chip_data); i++) {
+		cd = irq_core_chip_data + i;
+		cd->current_en = false;
+		cd->desired_en = false;
+		cd->bit = i;
+		mutex_init(&cd->core_irq_mutex);
+
+		irq = MIPS_CPU_IRQ_BASE + i;
+
+		switch (i) {
+		case 0: /* SW0 */
+		case 1: /* SW1 */
+		case 5: /* IP5 */
+		case 6: /* IP6 */
+		case 7: /* IP7 */
+			irq_set_chip_data(irq, cd);
+			irq_set_chip_and_handler(irq, &irq_chip_core,
+						 handle_percpu_irq);
+			break;
+		default:
+			break;
+		}
+	}
+}
+
+static void __iomem *mips_irq_chip;
+#define MIPS_IRQ_CHIP_NUM_BITS 0
+#define MIPS_IRQ_CHIP_REGS 8
+
+static int mips_irq_cpu_stride;
+static int mips_irq_chip_reg_raw;
+static int mips_irq_chip_reg_src;
+static int mips_irq_chip_reg_en;
+static int mips_irq_chip_reg_raw_w1s;
+static int mips_irq_chip_reg_raw_w1c;
+static int mips_irq_chip_reg_en_w1s;
+static int mips_irq_chip_reg_en_w1c;
+
+static void irq_pci_enable(struct irq_data *data)
+{
+	u32 mask = 1u << data->irq;
+
+	__raw_writel(mask, mips_irq_chip + mips_irq_chip_reg_en_w1s);
+}
+
+static void irq_pci_disable(struct irq_data *data)
+{
+	u32 mask = 1u << data->irq;
+
+	__raw_writel(mask, mips_irq_chip + mips_irq_chip_reg_en_w1c);
+}
+
+static void irq_pci_ack(struct irq_data *data)
+{
+}
+
+static void irq_pci_mask(struct irq_data *data)
+{
+	u32 mask = 1u << data->irq;
+
+	__raw_writel(mask, mips_irq_chip + mips_irq_chip_reg_en_w1c);
+}
+
+static void irq_pci_unmask(struct irq_data *data)
+{
+	u32 mask = 1u << data->irq;
+
+	__raw_writel(mask, mips_irq_chip + mips_irq_chip_reg_en_w1s);
+}
+
+static struct irq_chip irq_chip_pci = {
+	.name = "PCI",
+	.irq_enable = irq_pci_enable,
+	.irq_disable = irq_pci_disable,
+	.irq_ack = irq_pci_ack,
+	.irq_mask = irq_pci_mask,
+	.irq_unmask = irq_pci_unmask,
+};
+
+static void irq_mbox_all(struct irq_data *data,  void __iomem *base)
+{
+	int cpu;
+	unsigned int mbox = data->irq - MIPS_IRQ_MBOX0;
+	u32 mask;
+
+	WARN_ON(mbox >= MBOX_BITS_PER_CPU);
+
+	for_each_online_cpu(cpu) {
+		unsigned int cpuid = cpunum_for_cpu(cpu);
+		mask = 1 << (cpuid * MBOX_BITS_PER_CPU + mbox);
+		__raw_writel(mask, base + (cpuid * mips_irq_cpu_stride));
+	}
+}
+
+static void irq_mbox_enable(struct irq_data *data)
+{
+	irq_mbox_all(data, mips_irq_chip + mips_irq_chip_reg_en_w1s + sizeof(u32));
+}
+
+static void irq_mbox_disable(struct irq_data *data)
+{
+	irq_mbox_all(data, mips_irq_chip + mips_irq_chip_reg_en_w1c + sizeof(u32));
+}
+
+static void irq_mbox_ack(struct irq_data *data)
+{
+	u32 mask;
+	unsigned int mbox = data->irq - MIPS_IRQ_MBOX0;
+
+	WARN_ON(mbox >= MBOX_BITS_PER_CPU);
+
+	mask = 1 << (get_ebase_cpunum() * MBOX_BITS_PER_CPU + mbox);
+	__raw_writel(mask, mips_irq_chip + mips_irq_chip_reg_raw_w1c + sizeof(u32));
+}
+
+void irq_mbox_ipi(int cpu, unsigned int actions)
+{
+	unsigned int cpuid = cpunum_for_cpu(cpu);
+	u32 mask;
+
+	WARN_ON(actions >= (1 << MBOX_BITS_PER_CPU));
+
+	mask = actions << (cpuid * MBOX_BITS_PER_CPU);
+	__raw_writel(mask, mips_irq_chip + mips_irq_chip_reg_raw_w1s + sizeof(u32));
+}
+
+static void irq_mbox_cpu_onoffline(struct irq_data *data,  void __iomem *base)
+{
+	unsigned int mbox = data->irq - MIPS_IRQ_MBOX0;
+	unsigned int cpuid = get_ebase_cpunum();
+	u32 mask;
+
+	WARN_ON(mbox >= MBOX_BITS_PER_CPU);
+
+	mask = 1 << (cpuid * MBOX_BITS_PER_CPU + mbox);
+	__raw_writel(mask, base + (cpuid * mips_irq_cpu_stride));
+
+}
+
+static void irq_mbox_cpu_online(struct irq_data *data)
+{
+	irq_mbox_cpu_onoffline(data, mips_irq_chip + mips_irq_chip_reg_en_w1s + sizeof(u32));
+}
+
+static void irq_mbox_cpu_offline(struct irq_data *data)
+{
+	irq_mbox_cpu_onoffline(data, mips_irq_chip + mips_irq_chip_reg_en_w1c + sizeof(u32));
+}
+
+static struct irq_chip irq_chip_mbox = {
+	.name = "MBOX",
+	.irq_enable = irq_mbox_enable,
+	.irq_disable = irq_mbox_disable,
+	.irq_ack = irq_mbox_ack,
+	.irq_cpu_online = irq_mbox_cpu_online,
+	.irq_cpu_offline = irq_mbox_cpu_offline,
+	.flags = IRQCHIP_ONOFFLINE_ENABLED,
+};
+
+static void __init irq_pci_init(void)
+{
+	int i, stride;
+	u32 num_bits;
+
+	mips_irq_chip = ioremap(0x1e010000, 4096);
+
+	num_bits = __raw_readl(mips_irq_chip + MIPS_IRQ_CHIP_NUM_BITS);
+	stride = 8 * (1 + ((num_bits - 1) / 64));
+
+
+	pr_notice("mips_irq_chip: %u bits, reg stride: %d\n", num_bits, stride);
+	mips_irq_chip_reg_raw		= MIPS_IRQ_CHIP_REGS + 0 * stride;
+	mips_irq_chip_reg_raw_w1s	= MIPS_IRQ_CHIP_REGS + 1 * stride;
+	mips_irq_chip_reg_raw_w1c	= MIPS_IRQ_CHIP_REGS + 2 * stride;
+	mips_irq_chip_reg_src		= MIPS_IRQ_CHIP_REGS + 3 * stride;
+	mips_irq_chip_reg_en		= MIPS_IRQ_CHIP_REGS + 4 * stride;
+	mips_irq_chip_reg_en_w1s	= MIPS_IRQ_CHIP_REGS + 5 * stride;
+	mips_irq_chip_reg_en_w1c	= MIPS_IRQ_CHIP_REGS + 6 * stride;
+	mips_irq_cpu_stride		= stride * 4;
+
+	for (i = 0; i < 4; i++)
+		irq_set_chip_and_handler(i + MIPS_IRQ_PCIA, &irq_chip_pci, handle_level_irq);
+
+	for (i = 0; i < 2; i++)
+		irq_set_chip_and_handler(i + MIPS_IRQ_MBOX0, &irq_chip_mbox, handle_percpu_irq);
+
+
+	set_c0_status(STATUSF_IP2);
+}
+
+static void irq_pci_dispatch(void)
+{
+	unsigned int cpuid = get_ebase_cpunum();
+	u32 en;
+
+	en = __raw_readl(mips_irq_chip + mips_irq_chip_reg_src +
+			(cpuid * mips_irq_cpu_stride));
+
+	if (!en) {
+		en = __raw_readl(mips_irq_chip + mips_irq_chip_reg_src + (cpuid * mips_irq_cpu_stride) + sizeof(u32));
+		en = (en >> (2 * cpuid)) & 3;
+
+		if (!en)
+			spurious_interrupt();
+		else
+			do_IRQ(__ffs(en) + MIPS_IRQ_MBOX0);	/* MBOX type */
+	} else {
+		do_IRQ(__ffs(en));
+	}
+}
+
+
+void __init arch_init_irq(void)
+{
+	irq_init_core();
+	irq_pci_init();
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int ip;
+
+	if (unlikely(!pending)) {
+		spurious_interrupt();
+		return;
+	}
+
+	ip = ffs(pending) - 1 - STATUSB_IP0;
+	if (ip == 2)
+		irq_pci_dispatch();
+	else
+		do_IRQ(MIPS_CPU_IRQ_BASE + ip);
+}
+
diff --git a/arch/mips/paravirt/paravirt-smp.c b/arch/mips/paravirt/paravirt-smp.c
new file mode 100644
index 0000000..73a123e
--- /dev/null
+++ b/arch/mips/paravirt/paravirt-smp.c
@@ -0,0 +1,148 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/mipsregs.h>
+#include <asm/setup.h>
+#include <asm/time.h>
+#include <asm/smp.h>
+
+/*
+ * Writing the sp releases the CPU, so writes must be ordered, gp
+ * first, then sp.
+ */
+unsigned long paravirt_smp_sp[NR_CPUS];
+unsigned long paravirt_smp_gp[NR_CPUS];
+
+static int numcpus = 1;
+
+static int __init set_numcpus(char *str)
+{
+	int newval;
+
+	if (get_option(&str, &newval)) {
+		if (newval < 1 || newval >= NR_CPUS)
+			goto bad;
+		numcpus = newval;
+		return 0;
+	}
+bad:
+	return -EINVAL;
+}
+early_param("numcpus", set_numcpus);
+
+
+static void paravirt_smp_setup(void)
+{
+	int id;
+	unsigned int cpunum = get_ebase_cpunum();
+
+	if (WARN_ON(cpunum >= NR_CPUS))
+		return;
+
+	/* The present CPUs are initially just the boot cpu (CPU 0). */
+	for (id = 0; id < NR_CPUS; id++) {
+		set_cpu_possible(id, id == 0);
+		set_cpu_present(id, id == 0);
+	}
+	__cpu_number_map[cpunum] = 0;
+	__cpu_logical_map[0] = cpunum;
+
+	for (id = 0; id < numcpus; id++) {
+		set_cpu_possible(id, true);
+		set_cpu_present(id, true);
+		__cpu_number_map[id] = id;
+		__cpu_logical_map[id] = id;
+	}
+}
+
+void irq_mbox_ipi(int cpu, unsigned int actions);
+static void paravirt_send_ipi_single(int cpu, unsigned int action)
+{
+	irq_mbox_ipi(cpu, action);
+}
+
+static void paravirt_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+	unsigned int cpu;
+
+	for_each_cpu_mask(cpu, *mask)
+		paravirt_send_ipi_single(cpu, action);
+}
+
+static void paravirt_init_secondary(void)
+{
+	unsigned int sr;
+
+	sr = set_c0_status(ST0_BEV);
+	write_c0_ebase((u32)ebase);
+
+	sr |= STATUSF_IP2; /* Interrupt controller on IP2 */
+	write_c0_status(sr);
+
+	irq_cpu_online();
+}
+
+static void paravirt_smp_finish(void)
+{
+	/* to generate the first CPU timer interrupt */
+	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+	local_irq_enable();
+}
+
+static void paravirt_cpus_done(void)
+{
+}
+
+static void paravirt_boot_secondary(int cpu, struct task_struct *idle)
+{
+	paravirt_smp_gp[cpu] = (unsigned long)task_thread_info(idle);
+	smp_wmb();
+	paravirt_smp_sp[cpu] = __KSTK_TOS(idle);
+}
+
+static irqreturn_t paravirt_reched_interrupt(int irq, void *dev_id)
+{
+	scheduler_ipi();
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t paravirt_function_interrupt(int irq, void *dev_id)
+{
+	smp_call_function_interrupt();
+	return IRQ_HANDLED;
+}
+
+static void paravirt_prepare_cpus(unsigned int max_cpus)
+{
+	if (request_irq(MIPS_IRQ_MBOX0, paravirt_reched_interrupt,
+			IRQF_PERCPU | IRQF_NO_THREAD, "Scheduler",
+			paravirt_reched_interrupt)) {
+		panic("Cannot request_irq for SchedulerIPI");
+	}
+	if (request_irq(MIPS_IRQ_MBOX1, paravirt_function_interrupt,
+			IRQF_PERCPU | IRQF_NO_THREAD, "SMP-Call",
+			paravirt_function_interrupt)) {
+		panic("Cannot request_irq for SMP-Call");
+	}
+}
+
+struct plat_smp_ops paravirt_smp_ops = {
+	.send_ipi_single	= paravirt_send_ipi_single,
+	.send_ipi_mask		= paravirt_send_ipi_mask,
+	.init_secondary		= paravirt_init_secondary,
+	.smp_finish		= paravirt_smp_finish,
+	.cpus_done		= paravirt_cpus_done,
+	.boot_secondary		= paravirt_boot_secondary,
+	.smp_setup		= paravirt_smp_setup,
+	.prepare_cpus		= paravirt_prepare_cpus,
+};
diff --git a/arch/mips/paravirt/serial.c b/arch/mips/paravirt/serial.c
new file mode 100644
index 0000000..02b665c
--- /dev/null
+++ b/arch/mips/paravirt/serial.c
@@ -0,0 +1,40 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/virtio_console.h>
+#include <linux/kvm_para.h>
+
+/*
+ * Emit one character to the boot console.
+ */
+int prom_putchar(char c)
+{
+	kvm_hypercall3(KVM_HC_MIPS_CONSOLE_OUTPUT, 0 /*  port 0 */,
+		(unsigned long)&c, 1 /* len == 1 */);
+
+	return 1;
+}
+
+#ifdef CONFIG_VIRTIO_CONSOLE
+static int paravirt_put_chars(u32 vtermno, const char *buf, int count)
+{
+	kvm_hypercall3(KVM_HC_MIPS_CONSOLE_OUTPUT, vtermno,
+		(unsigned long)buf, count);
+
+	return count;
+}
+
+static int __init paravirt_cons_init(void)
+{
+	virtio_cons_early_init(paravirt_put_chars);
+	return 0;
+}
+core_initcall(paravirt_cons_init);
+
+#endif
diff --git a/arch/mips/paravirt/setup.c b/arch/mips/paravirt/setup.c
new file mode 100644
index 0000000..cb8448b
--- /dev/null
+++ b/arch/mips/paravirt/setup.c
@@ -0,0 +1,67 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kvm_para.h>
+
+#include <asm/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/smp-ops.h>
+#include <asm/time.h>
+
+extern struct plat_smp_ops paravirt_smp_ops;
+
+const char *get_system_type(void)
+{
+	return "MIPS Para-Virtualized Guest";
+}
+
+void __init plat_time_init(void)
+{
+	mips_hpt_frequency = kvm_hypercall0(KVM_HC_MIPS_GET_CLOCK_FREQ);
+
+	preset_lpj = mips_hpt_frequency / (2 * HZ);
+}
+
+static void pv_machine_halt(void)
+{
+	kvm_hypercall0(KVM_HC_MIPS_EXIT_VM);
+}
+
+/*
+ * Early entry point for arch setup
+ */
+void __init prom_init(void)
+{
+	int i;
+	int argc = fw_arg0;
+	char **argv = (char **)fw_arg1;
+
+#ifdef CONFIG_32BIT
+	set_io_port_base(KSEG1ADDR(0x1e000000));
+#else /* CONFIG_64BIT */
+	set_io_port_base(PHYS_TO_XKSEG_UNCACHED(0x1e000000));
+#endif
+
+	for (i = 0; i < argc; i++) {
+		strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
+		if (i < argc - 1)
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
+	}
+	_machine_halt = pv_machine_halt;
+	register_smp_ops(&paravirt_smp_ops);
+}
+
+void __init plat_mem_setup(void)
+{
+	/* Do nothing, the "mem=???" parser handles our memory. */
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
-- 
1.7.9.5

[PATCH v2 11/13] MIPS: paravirt: Add pci controller for virtio

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>


Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/Kconfig                |    1 +
 arch/mips/paravirt/Kconfig       |    6 ++
 arch/mips/pci/Makefile           |    2 +-
 arch/mips/pci/pci-virtio-guest.c |  131 ++++++++++++++++++++++++++++++++++++++
 4 files changed, 139 insertions(+), 1 deletion(-)
 create mode 100644 arch/mips/paravirt/Kconfig
 create mode 100644 arch/mips/pci/pci-virtio-guest.c

[andreas.herrmann:
  * Make use of __BITFIELD_FIELD macro
  * Calculate IO address for in[lwb] and out[lwb] depending on size]

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index d540945..1f836d8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -823,6 +823,7 @@ source "arch/mips/cavium-octeon/Kconfig"
 source "arch/mips/loongson/Kconfig"
 source "arch/mips/loongson1/Kconfig"
 source "arch/mips/netlogic/Kconfig"
+source "arch/mips/paravirt/Kconfig"
 
 endmenu
 
diff --git a/arch/mips/paravirt/Kconfig b/arch/mips/paravirt/Kconfig
new file mode 100644
index 0000000..ecae586
--- /dev/null
+++ b/arch/mips/paravirt/Kconfig
@@ -0,0 +1,6 @@
+if MIPS_PARAVIRT
+
+config MIPS_PCI_VIRTIO
+	def_bool y
+
+endif #  MIPS_PARAVIRT
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index d61138a..ff8a553 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_BCM63XX)		+= pci-bcm63xx.o fixup-bcm63xx.o \
 obj-$(CONFIG_MIPS_ALCHEMY)	+= pci-alchemy.o
 obj-$(CONFIG_SOC_AR71XX)	+= pci-ar71xx.o
 obj-$(CONFIG_PCI_AR724X)	+= pci-ar724x.o
-
+obj-$(CONFIG_MIPS_PCI_VIRTIO)	+= pci-virtio-guest.o
 #
 # These are still pretty much in the old state, watch, go blind.
 #
diff --git a/arch/mips/pci/pci-virtio-guest.c b/arch/mips/pci/pci-virtio-guest.c
new file mode 100644
index 0000000..40a078b
--- /dev/null
+++ b/arch/mips/pci/pci-virtio-guest.c
@@ -0,0 +1,131 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 Cavium, Inc.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+
+#include <uapi/asm/bitfield.h>
+#include <asm/byteorder.h>
+#include <asm/io.h>
+
+#define PCI_CONFIG_ADDRESS	0xcf8
+#define PCI_CONFIG_DATA		0xcfc
+
+union pci_config_address {
+	struct {
+		__BITFIELD_FIELD(unsigned enable_bit	  : 1,	/* 31       */
+		__BITFIELD_FIELD(unsigned reserved	  : 7,	/* 30 .. 24 */
+		__BITFIELD_FIELD(unsigned bus_number	  : 8,	/* 23 .. 16 */
+		__BITFIELD_FIELD(unsigned devfn_number	  : 8,	/* 15 .. 8  */
+		__BITFIELD_FIELD(unsigned register_number : 8,	/* 7  .. 0  */
+		)))));
+	};
+	u32 w;
+};
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return ((pin + slot) % 4)+ MIPS_IRQ_PCIA;
+}
+
+static void pci_virtio_guest_write_config_addr(struct pci_bus *bus,
+					unsigned int devfn, int reg)
+{
+	union pci_config_address pca = { .w = 0 };
+
+	pca.register_number = reg;
+	pca.devfn_number = devfn;
+	pca.bus_number = bus->number;
+	pca.enable_bit = 1;
+
+	outl(pca.w, PCI_CONFIG_ADDRESS);
+}
+
+static int pci_virtio_guest_write_config(struct pci_bus *bus,
+		unsigned int devfn, int reg, int size, u32 val)
+{
+	pci_virtio_guest_write_config_addr(bus, devfn, reg);
+
+	switch (size) {
+	case 1:
+		outb(val, PCI_CONFIG_DATA + (reg & 3));
+		break;
+	case 2:
+		outw(val, PCI_CONFIG_DATA + (reg & 2));
+		break;
+	case 4:
+		outl(val, PCI_CONFIG_DATA);
+		break;
+	}
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_virtio_guest_read_config(struct pci_bus *bus, unsigned int devfn,
+					int reg, int size, u32 *val)
+{
+	pci_virtio_guest_write_config_addr(bus, devfn, reg);
+
+	switch (size) {
+	case 1:
+		*val = inb(PCI_CONFIG_DATA + (reg & 3));
+		break;
+	case 2:
+		*val = inw(PCI_CONFIG_DATA + (reg & 2));
+		break;
+	case 4:
+		*val = inl(PCI_CONFIG_DATA);
+		break;
+	}
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_virtio_guest_ops = {
+	.read  = pci_virtio_guest_read_config,
+	.write = pci_virtio_guest_write_config,
+};
+
+static struct resource pci_virtio_guest_mem_resource = {
+	.name = "Virtio MEM",
+	.flags = IORESOURCE_MEM,
+	.start	= 0x10000000,
+	.end	= 0x1dffffff
+};
+
+static struct resource pci_virtio_guest_io_resource = {
+	.name = "Virtio IO",
+	.flags = IORESOURCE_IO,
+	.start	= 0,
+	.end	= 0xffff
+};
+
+static struct pci_controller pci_virtio_guest_controller = {
+	.pci_ops = &pci_virtio_guest_ops,
+	.mem_resource = &pci_virtio_guest_mem_resource,
+	.io_resource = &pci_virtio_guest_io_resource,
+};
+
+static int __init pci_virtio_guest_setup(void)
+{
+	pr_err("pci_virtio_guest_setup\n");
+
+	/* Virtio comes pre-assigned */
+	pci_set_flags(PCI_PROBE_ONLY);
+
+	pci_virtio_guest_controller.io_map_base = mips_io_port_base;
+	register_pci_controller(&pci_virtio_guest_controller);
+	return 0;
+}
+arch_initcall(pci_virtio_guest_setup);
-- 
1.7.9.5

[PATCH v2 12/13] MIPS: Enable build for new system 'paravirt'

[Andreas Herrmann]

From: David Daney <david.daney@cavium.com>

Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/Kbuild.platforms |    1 +
 arch/mips/Kconfig          |   19 +++++++++++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 6e23912..f5e18bf 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -18,6 +18,7 @@ platforms += loongson1
 platforms += mti-malta
 platforms += mti-sead3
 platforms += netlogic
+platforms += paravirt
 platforms += pmcs-msp71xx
 platforms += pnx833x
 platforms += ralink
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 1f836d8..df16e1e 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -803,6 +803,25 @@ config NLM_XLP_BOARD
 	  This board is based on Netlogic XLP Processor.
 	  Say Y here if you have a XLP based board.
 
+config MIPS_PARAVIRT
+	bool "Para-Virtualized guest system"
+	select CEVT_R4K
+	select CSRC_R4K
+	select DMA_COHERENT
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_SMP
+	select NR_CPUS_DEFAULT_4
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_HAS_CPU_MIPS64_R2
+	select SYS_HAS_CPU_CAVIUM_OCTEON
+	select HW_HAS_PCI
+	select SWAP_IO_SPACE
+	help
+	  This option supports guest running under ????
+
 endchoice
 
 source "arch/mips/alchemy/Kconfig"
-- 
1.7.9.5

[PATCH v2 13/13] MIPS: Add minimal defconfig for mips_paravirt

[Andreas Herrmann]

Signed-off-by: Andreas Herrmann <andreas.herrmann@caviumnetworks.com>
---
 arch/mips/configs/mips_paravirt_defconfig |  103 +++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)
 create mode 100644 arch/mips/configs/mips_paravirt_defconfig

diff --git a/arch/mips/configs/mips_paravirt_defconfig b/arch/mips/configs/mips_paravirt_defconfig
new file mode 100644
index 0000000..84cfcb4
--- /dev/null
+++ b/arch/mips/configs/mips_paravirt_defconfig
@@ -0,0 +1,103 @@
+CONFIG_MIPS_PARAVIRT=y
+CONFIG_CPU_MIPS64_R2=y
+CONFIG_64BIT=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_SMP=y
+CONFIG_HZ_1000=y
+CONFIG_PREEMPT=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_MIPS32_COMPAT=y
+CONFIG_MIPS32_O32=y
+CONFIG_MIPS32_N32=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PHYLIB=y
+CONFIG_MARVELL_PHY=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_BCM87XX_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_VIRTIO_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
-- 
1.7.9.5

Re: [PATCH v2 09/13] MIPS: Add functions for hypervisor call

[Ralf Baechle]

On Wed, May 28, 2014 at 11:52:12PM +0200, Andreas Herrmann wrote:

> +/*
> + * Hypercalls for KVM.
> + *
> + * Hypercall number is passed in v0.
> + * Return value will be placed in v0.
> + * Up to 3 arguments are passed in a0, a1, and a2.
> + */
> +static inline unsigned long kvm_hypercall0(unsigned long num)
> +{
> +	register unsigned long n asm("v0");
> +	register unsigned long r asm("v0");

Btw, is it safe to put two variables in the same register?

The syscall wrappers that used to be in <asm/unistd.h> were occasionally
hitting problems which eventually forced me to stop forcing variables
into particular registers instead using a MOVE instruction to shove
each variable into the right place.

Of course they were being used from non-PIC and PIC code, kernel and userland
so GCC had a much better chance to do evil than in the hypercall wrapper
case - but it made me paranoid ...

  Ralf

Re: [PATCH v2 09/13] MIPS: Add functions for hypervisor call

[Andreas Herrmann]

On Tue, Jun 03, 2014 at 10:30:31AM +0200, Ralf Baechle wrote:
> On Wed, May 28, 2014 at 11:52:12PM +0200, Andreas Herrmann wrote:
> 
> > +/*
> > + * Hypercalls for KVM.
> > + *
> > + * Hypercall number is passed in v0.
> > + * Return value will be placed in v0.
> > + * Up to 3 arguments are passed in a0, a1, and a2.
> > + */
> > +static inline unsigned long kvm_hypercall0(unsigned long num)
> > +{
> > +	register unsigned long n asm("v0");
> > +	register unsigned long r asm("v0");
> 
> Btw, is it safe to put two variables in the same register?

I think it's safe.

If we would have a matching constraint letter (say "v" for register v0) the
asm should translate to

        __asm__ __volatile__(
	       KVM_HYPERCALL
                : "=v" (n) : "v" (r) : "memory"
                );

which isn't unusual on other archs. (Or maybe I am just biased from
x86 ... or missed something else.)

> The syscall wrappers that used to be in <asm/unistd.h> were occasionally
> hitting problems which eventually forced me to stop forcing variables
> into particular registers instead using a MOVE instruction to shove
> each variable into the right place.
> 
> Of course they were being used from non-PIC and PIC code, kernel and userland
> so GCC had a much better chance to do evil than in the hypercall wrapper
> case - but it made me paranoid ...



Andreas

Re: [PATCH v2 09/13] MIPS: Add functions for hypervisor call

[David Daney]

In cases like this, I always wonder WWPD (What Would Pinski Do)...

Let's get him to opine.

Andrew, the patch in question is:

http://www.linux-mips.org/archives/linux-mips/2014-05/msg00309.html

Thanks,
David Daney

On 06/03/2014 08:03 AM, Andreas Herrmann wrote:
> On Tue, Jun 03, 2014 at 10:30:31AM +0200, Ralf Baechle wrote:
>> On Wed, May 28, 2014 at 11:52:12PM +0200, Andreas Herrmann wrote:
>>
>>> +/*
>>> + * Hypercalls for KVM.
>>> + *
>>> + * Hypercall number is passed in v0.
>>> + * Return value will be placed in v0.
>>> + * Up to 3 arguments are passed in a0, a1, and a2.
>>> + */
>>> +static inline unsigned long kvm_hypercall0(unsigned long num)
>>> +{
>>> +	register unsigned long n asm("v0");
>>> +	register unsigned long r asm("v0");
>>
>> Btw, is it safe to put two variables in the same register?
>
> I think it's safe.
>
> If we would have a matching constraint letter (say "v" for register v0) the
> asm should translate to
>
>          __asm__ __volatile__(
> 	       KVM_HYPERCALL
>                  : "=v" (n) : "v" (r) : "memory"
>                  );
>
> which isn't unusual on other archs. (Or maybe I am just biased from
> x86 ... or missed something else.)
>
>> The syscall wrappers that used to be in <asm/unistd.h> were occasionally
>> hitting problems which eventually forced me to stop forcing variables
>> into particular registers instead using a MOVE instruction to shove
>> each variable into the right place.
>>
>> Of course they were being used from non-PIC and PIC code, kernel and userland
>> so GCC had a much better chance to do evil than in the hypercall wrapper
>> case - but it made me paranoid ...
>
>
>
> Andreas
>

Re: [PATCH v2 09/13] MIPS: Add functions for hypervisor call

[Pinski, Andrew]

> On Jun 3, 2014, at 9:40 AM, "Daney, David" <David.Daney@caviumnetworks.com> wrote:
> 
> In cases like this, I always wonder WWPD (What Would Pinski Do)...
> 
> Let's get him to opine.
> 
> Andrew, the patch in question is:
> 
> http://www.linux-mips.org/archives/linux-mips/2014-05/msg00309.html


Yes having two variables with the same register is safe as long as the only time the live ranges of them overlap is the inline-asm where they are used. 

Thanks,
Andrew

> 
> Thanks,
> David Daney
> 
>> On 06/03/2014 08:03 AM, Andreas Herrmann wrote:
>>> On Tue, Jun 03, 2014 at 10:30:31AM +0200, Ralf Baechle wrote:
>>>> On Wed, May 28, 2014 at 11:52:12PM +0200, Andreas Herrmann wrote:
>>>> 
>>>> +/*
>>>> + * Hypercalls for KVM.
>>>> + *
>>>> + * Hypercall number is passed in v0.
>>>> + * Return value will be placed in v0.
>>>> + * Up to 3 arguments are passed in a0, a1, and a2.
>>>> + */
>>>> +static inline unsigned long kvm_hypercall0(unsigned long num)
>>>> +{
>>>> +    register unsigned long n asm("v0");
>>>> +    register unsigned long r asm("v0");
>>> 
>>> Btw, is it safe to put two variables in the same register?
>> 
>> I think it's safe.
>> 
>> If we would have a matching constraint letter (say "v" for register v0) the
>> asm should translate to
>> 
>>         __asm__ __volatile__(
>>           KVM_HYPERCALL
>>                 : "=v" (n) : "v" (r) : "memory"
>>                 );
>> 
>> which isn't unusual on other archs. (Or maybe I am just biased from
>> x86 ... or missed something else.)
>> 
>>> The syscall wrappers that used to be in <asm/unistd.h> were occasionally
>>> hitting problems which eventually forced me to stop forcing variables
>>> into particular registers instead using a MOVE instruction to shove
>>> each variable into the right place.
>>> 
>>> Of course they were being used from non-PIC and PIC code, kernel and userland
>>> so GCC had a much better chance to do evil than in the hypercall wrapper
>>> case - but it made me paranoid ...
>> 
>> 
>> 
>> Andreas
>>