[PATCH v2 15/18] vhost: switch vhost get_indirect() to iov_iter, kill memcpy_fromiovec()

[PATCH v2 15/18] vhost: switch vhost get_indirect() to iov_iter, kill memcpy_fromiovec()

[Al Viro]

From: Al Viro <viro@zeniv.linux.org.uk>

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/vhost/vhost.c |  6 ++++--
 include/linux/uio.h   |  1 -
 lib/iovec.c           | 25 -------------------------
 3 files changed, 4 insertions(+), 28 deletions(-)

diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
index cb807d0..2ee2826 100644
--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1125,6 +1125,7 @@ static int get_indirect(struct vhost_virtqueue *vq,
 	struct vring_desc desc;
 	unsigned int i = 0, count, found = 0;
 	u32 len = vhost32_to_cpu(vq, indirect->len);
+	struct iov_iter from;
 	int ret;
 
 	/* Sanity check */
@@ -1142,6 +1143,7 @@ static int get_indirect(struct vhost_virtqueue *vq,
 		vq_err(vq, "Translation failure %d in indirect.\n", ret);
 		return ret;
 	}
+	iov_iter_init(&from, READ, vq->indirect, ret, len);
 
 	/* We will use the result as an address to read from, so most
 	 * architectures only need a compiler barrier here. */
@@ -1164,8 +1166,8 @@ static int get_indirect(struct vhost_virtqueue *vq,
 			       i, count);
 			return -EINVAL;
 		}
-		if (unlikely(memcpy_fromiovec((unsigned char *)&desc,
-					      vq->indirect, sizeof desc))) {
+		if (unlikely(copy_from_iter(&desc, sizeof(desc), &from) !=
+			     sizeof(desc))) {
 			vq_err(vq, "Failed indirect descriptor: idx %d, %zx\n",
 			       i, (size_t)vhost64_to_cpu(vq, indirect->addr) + i * sizeof desc);
 			return -EINVAL;
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 1c5e453..af3439f 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -135,7 +135,6 @@ static inline void iov_iter_reexpand(struct iov_iter *i, size_t count)
 size_t csum_and_copy_to_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i);
 size_t csum_and_copy_from_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i);
 
-int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
 int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
 			int offset, int len);
 int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
diff --git a/lib/iovec.c b/lib/iovec.c
index 2d99cb4..4a90875 100644
--- a/lib/iovec.c
+++ b/lib/iovec.c
@@ -3,31 +3,6 @@
 #include <linux/uio.h>
 
 /*
- *	Copy iovec to kernel. Returns -EFAULT on error.
- *
- *	Note: this modifies the original iovec.
- */
-
-int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len)
-{
-	while (len > 0) {
-		if (iov->iov_len) {
-			int copy = min_t(unsigned int, len, iov->iov_len);
-			if (copy_from_user(kdata, iov->iov_base, copy))
-				return -EFAULT;
-			len -= copy;
-			kdata += copy;
-			iov->iov_base += copy;
-			iov->iov_len -= copy;
-		}
-		iov++;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(memcpy_fromiovec);
-
-/*
  *	Copy kernel to iovec. Returns -EFAULT on error.
  */
 
-- 
2.1.4

Re: [PATCH v2 15/18] vhost: switch vhost get_indirect() to iov_iter, kill memcpy_fromiovec()

[Michael S. Tsirkin]

On Mon, Feb 02, 2015 at 07:59:34AM +0000, Al Viro wrote:
> From: Al Viro <viro@zeniv.linux.org.uk>
> 
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: kvm@vger.kernel.org
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Acked-by: Michael S. Tsirkin <mst@redhat.com>

But, can you pls copy virtualization@lists.linux-foundation.org ?
I think some guys working on virtio might only hang out there.

> ---
>  drivers/vhost/vhost.c |  6 ++++--
>  include/linux/uio.h   |  1 -
>  lib/iovec.c           | 25 -------------------------
>  3 files changed, 4 insertions(+), 28 deletions(-)
> 
> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> index cb807d0..2ee2826 100644
> --- a/drivers/vhost/vhost.c
> +++ b/drivers/vhost/vhost.c
> @@ -1125,6 +1125,7 @@ static int get_indirect(struct vhost_virtqueue *vq,
>  	struct vring_desc desc;
>  	unsigned int i = 0, count, found = 0;
>  	u32 len = vhost32_to_cpu(vq, indirect->len);
> +	struct iov_iter from;
>  	int ret;
>  
>  	/* Sanity check */
> @@ -1142,6 +1143,7 @@ static int get_indirect(struct vhost_virtqueue *vq,
>  		vq_err(vq, "Translation failure %d in indirect.\n", ret);
>  		return ret;
>  	}
> +	iov_iter_init(&from, READ, vq->indirect, ret, len);
>  
>  	/* We will use the result as an address to read from, so most
>  	 * architectures only need a compiler barrier here. */
> @@ -1164,8 +1166,8 @@ static int get_indirect(struct vhost_virtqueue *vq,
>  			       i, count);
>  			return -EINVAL;
>  		}
> -		if (unlikely(memcpy_fromiovec((unsigned char *)&desc,
> -					      vq->indirect, sizeof desc))) {
> +		if (unlikely(copy_from_iter(&desc, sizeof(desc), &from) !=
> +			     sizeof(desc))) {
>  			vq_err(vq, "Failed indirect descriptor: idx %d, %zx\n",
>  			       i, (size_t)vhost64_to_cpu(vq, indirect->addr) + i * sizeof desc);
>  			return -EINVAL;
> diff --git a/include/linux/uio.h b/include/linux/uio.h
> index 1c5e453..af3439f 100644
> --- a/include/linux/uio.h
> +++ b/include/linux/uio.h
> @@ -135,7 +135,6 @@ static inline void iov_iter_reexpand(struct iov_iter *i, size_t count)
>  size_t csum_and_copy_to_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i);
>  size_t csum_and_copy_from_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i);
>  
> -int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len);
>  int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
>  			int offset, int len);
>  int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
> diff --git a/lib/iovec.c b/lib/iovec.c
> index 2d99cb4..4a90875 100644
> --- a/lib/iovec.c
> +++ b/lib/iovec.c
> @@ -3,31 +3,6 @@
>  #include <linux/uio.h>
>  
>  /*
> - *	Copy iovec to kernel. Returns -EFAULT on error.
> - *
> - *	Note: this modifies the original iovec.
> - */
> -
> -int memcpy_fromiovec(unsigned char *kdata, struct iovec *iov, int len)
> -{
> -	while (len > 0) {
> -		if (iov->iov_len) {
> -			int copy = min_t(unsigned int, len, iov->iov_len);
> -			if (copy_from_user(kdata, iov->iov_base, copy))
> -				return -EFAULT;
> -			len -= copy;
> -			kdata += copy;
> -			iov->iov_base += copy;
> -			iov->iov_len -= copy;
> -		}
> -		iov++;
> -	}
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(memcpy_fromiovec);
> -
> -/*
>   *	Copy kernel to iovec. Returns -EFAULT on error.
>   */
>  
> -- 
> 2.1.4

[PATCH v2 16/18] vhost: don't bother with copying iovec in handle_tx()

[Al Viro]

From: Al Viro <viro@zeniv.linux.org.uk>

just advance the msg.msg_iter and be done with that.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/vhost/net.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index 6906f76..d86cc9b 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -336,7 +336,7 @@ static void handle_tx(struct vhost_net *net)
 {
 	struct vhost_net_virtqueue *nvq = &net->vqs[VHOST_NET_VQ_TX];
 	struct vhost_virtqueue *vq = &nvq->vq;
-	unsigned out, in, s;
+	unsigned out, in;
 	int head;
 	struct msghdr msg = {
 		.msg_name = NULL,
@@ -395,16 +395,17 @@ static void handle_tx(struct vhost_net *net)
 			break;
 		}
 		/* Skip header. TODO: support TSO. */
-		s = move_iovec_hdr(vq->iov, nvq->hdr, hdr_size, out);
 		len = iov_length(vq->iov, out);
 		iov_iter_init(&msg.msg_iter, WRITE, vq->iov, out, len);
+		iov_iter_advance(&msg.msg_iter, hdr_size);
 		/* Sanity check */
-		if (!len) {
+		if (!iov_iter_count(&msg.msg_iter)) {
 			vq_err(vq, "Unexpected header len for TX: "
 			       "%zd expected %zd\n",
-			       iov_length(nvq->hdr, s), hdr_size);
+			       len, hdr_size);
 			break;
 		}
+		len = iov_iter_count(&msg.msg_iter);
 
 		zcopy_used = zcopy && len >= VHOST_GOODCOPY_LEN
 				   && (nvq->upend_idx + 1) % UIO_MAXIOV !=
-- 
2.1.4

Re: [PATCH v2 16/18] vhost: don't bother with copying iovec in handle_tx()

[Michael S. Tsirkin]

On Mon, Feb 02, 2015 at 07:59:35AM +0000, Al Viro wrote:
> From: Al Viro <viro@zeniv.linux.org.uk>
> 
> just advance the msg.msg_iter and be done with that.
> 
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: kvm@vger.kernel.org
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Nice.

Acked-by: Michael S. Tsirkin <mst@redhat.com>

But, can you pls copy virtualization@lists.linux-foundation.org ?
I think some guys working on virtio might only hang out there.


> ---
>  drivers/vhost/net.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 6906f76..d86cc9b 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -336,7 +336,7 @@ static void handle_tx(struct vhost_net *net)
>  {
>  	struct vhost_net_virtqueue *nvq = &net->vqs[VHOST_NET_VQ_TX];
>  	struct vhost_virtqueue *vq = &nvq->vq;
> -	unsigned out, in, s;
> +	unsigned out, in;
>  	int head;
>  	struct msghdr msg = {
>  		.msg_name = NULL,
> @@ -395,16 +395,17 @@ static void handle_tx(struct vhost_net *net)
>  			break;
>  		}
>  		/* Skip header. TODO: support TSO. */
> -		s = move_iovec_hdr(vq->iov, nvq->hdr, hdr_size, out);
>  		len = iov_length(vq->iov, out);
>  		iov_iter_init(&msg.msg_iter, WRITE, vq->iov, out, len);
> +		iov_iter_advance(&msg.msg_iter, hdr_size);
>  		/* Sanity check */
> -		if (!len) {
> +		if (!iov_iter_count(&msg.msg_iter)) {
>  			vq_err(vq, "Unexpected header len for TX: "
>  			       "%zd expected %zd\n",
> -			       iov_length(nvq->hdr, s), hdr_size);
> +			       len, hdr_size);
>  			break;
>  		}
> +		len = iov_iter_count(&msg.msg_iter);
>  
>  		zcopy_used = zcopy && len >= VHOST_GOODCOPY_LEN
>  				   && (nvq->upend_idx + 1) % UIO_MAXIOV !=
> -- 
> 2.1.4

[PATCH v2 17/18] vhost: don't bother copying iovecs in handle_rx(), kill memcpy_toiovecend()

[Al Viro]

From: Al Viro <viro@zeniv.linux.org.uk>

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/vhost/net.c | 79 ++++++++++++++---------------------------------------
 include/linux/uio.h |  3 --
 lib/iovec.c         | 26 ------------------
 3 files changed, 20 insertions(+), 88 deletions(-)

diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
index d86cc9b..73c0ebf 100644
--- a/drivers/vhost/net.c
+++ b/drivers/vhost/net.c
@@ -84,10 +84,6 @@ struct vhost_net_ubuf_ref {
 
 struct vhost_net_virtqueue {
 	struct vhost_virtqueue vq;
-	/* hdr is used to store the virtio header.
-	 * Since each iovec has >= 1 byte length, we never need more than
-	 * header length entries to store the header. */
-	struct iovec hdr[sizeof(struct virtio_net_hdr_mrg_rxbuf)];
 	size_t vhost_hlen;
 	size_t sock_hlen;
 	/* vhost zerocopy support fields below: */
@@ -235,44 +231,6 @@ static bool vhost_sock_zcopy(struct socket *sock)
 		sock_flag(sock->sk, SOCK_ZEROCOPY);
 }
 
-/* Pop first len bytes from iovec. Return number of segments used. */
-static int move_iovec_hdr(struct iovec *from, struct iovec *to,
-			  size_t len, int iov_count)
-{
-	int seg = 0;
-	size_t size;
-
-	while (len && seg < iov_count) {
-		size = min(from->iov_len, len);
-		to->iov_base = from->iov_base;
-		to->iov_len = size;
-		from->iov_len -= size;
-		from->iov_base += size;
-		len -= size;
-		++from;
-		++to;
-		++seg;
-	}
-	return seg;
-}
-/* Copy iovec entries for len bytes from iovec. */
-static void copy_iovec_hdr(const struct iovec *from, struct iovec *to,
-			   size_t len, int iovcount)
-{
-	int seg = 0;
-	size_t size;
-
-	while (len && seg < iovcount) {
-		size = min(from->iov_len, len);
-		to->iov_base = from->iov_base;
-		to->iov_len = size;
-		len -= size;
-		++from;
-		++to;
-		++seg;
-	}
-}
-
 /* In case of DMA done not in order in lower device driver for some reason.
  * upend_idx is used to track end of used idx, done_idx is used to track head
  * of used idx. Once lower device DMA done contiguously, we will signal KVM
@@ -570,9 +528,9 @@ static void handle_rx(struct vhost_net *net)
 		.msg_controllen = 0,
 		.msg_flags = MSG_DONTWAIT,
 	};
-	struct virtio_net_hdr_mrg_rxbuf hdr = {
-		.hdr.flags = 0,
-		.hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE
+	struct virtio_net_hdr hdr = {
+		.flags = 0,
+		.gso_type = VIRTIO_NET_HDR_GSO_NONE
 	};
 	size_t total_len = 0;
 	int err, mergeable;
@@ -580,6 +538,7 @@ static void handle_rx(struct vhost_net *net)
 	size_t vhost_hlen, sock_hlen;
 	size_t vhost_len, sock_len;
 	struct socket *sock;
+	struct iov_iter fixup;
 
 	mutex_lock(&vq->mutex);
 	sock = vq->private_data;
@@ -624,14 +583,17 @@ static void handle_rx(struct vhost_net *net)
 			break;
 		}
 		/* We don't need to be notified again. */
-		if (unlikely((vhost_hlen)))
-			/* Skip header. TODO: support TSO. */
-			move_iovec_hdr(vq->iov, nvq->hdr, vhost_hlen, in);
-		else
-			/* Copy the header for use in VIRTIO_NET_F_MRG_RXBUF:
-			 * needed because recvmsg can modify msg_iov. */
-			copy_iovec_hdr(vq->iov, nvq->hdr, sock_hlen, in);
-		iov_iter_init(&msg.msg_iter, READ, vq->iov, in, sock_len);
+		iov_iter_init(&msg.msg_iter, READ, vq->iov, in, vhost_len);
+		fixup = msg.msg_iter;
+		if (unlikely((vhost_hlen))) {
+			/* We will supply the header ourselves
+			 * TODO: support TSO. */
+			iov_iter_advance(&msg.msg_iter, vhost_hlen);
+		} else {
+			/* It'll come from socket; we'll need to patch
+			 * ->num_buffers over if VIRTIO_NET_F_MRG_RXBUF */
+			iov_iter_advance(&fixup, sizeof(hdr));
+		}
 		err = sock->ops->recvmsg(NULL, sock, &msg,
 					 sock_len, MSG_DONTWAIT | MSG_TRUNC);
 		/* Userspace might have consumed the packet meanwhile:
@@ -643,18 +605,17 @@ static void handle_rx(struct vhost_net *net)
 			vhost_discard_vq_desc(vq, headcount);
 			continue;
 		}
+		/* Supply virtio_net_hdr if VHOST_NET_F_VIRTIO_NET_HDR */
 		if (unlikely(vhost_hlen) &&
-		    memcpy_toiovecend(nvq->hdr, (unsigned char *)&hdr, 0,
-				      vhost_hlen)) {
+		    copy_to_iter(&hdr, sizeof(hdr), &fixup) != sizeof(hdr)) {
 			vq_err(vq, "Unable to write vnet_hdr at addr %p\n",
 			       vq->iov->iov_base);
 			break;
 		}
-		/* TODO: Should check and handle checksum. */
+		/* Supply (or replace) ->num_buffers if VIRTIO_NET_F_MRG_RXBUF
+		 * TODO: Should check and handle checksum. */
 		if (likely(mergeable) &&
-		    memcpy_toiovecend(nvq->hdr, (unsigned char *)&headcount,
-				      offsetof(typeof(hdr), num_buffers),
-				      sizeof hdr.num_buffers)) {
+		    copy_to_iter(&headcount, 2, &fixup) != 2) {
 			vq_err(vq, "Failed num_buffers write");
 			vhost_discard_vq_desc(vq, headcount);
 			break;
diff --git a/include/linux/uio.h b/include/linux/uio.h
index af3439f..02bd8a9 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -137,7 +137,4 @@ size_t csum_and_copy_from_iter(void *addr, size_t bytes, __wsum *csum, struct io
 
 int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
 			int offset, int len);
-int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
-		      int offset, int len);
-
 #endif
diff --git a/lib/iovec.c b/lib/iovec.c
index 4a90875..d8f17a9 100644
--- a/lib/iovec.c
+++ b/lib/iovec.c
@@ -3,32 +3,6 @@
 #include <linux/uio.h>
 
 /*
- *	Copy kernel to iovec. Returns -EFAULT on error.
- */
-
-int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata,
-		      int offset, int len)
-{
-	int copy;
-	for (; len > 0; ++iov) {
-		/* Skip over the finished iovecs */
-		if (unlikely(offset >= iov->iov_len)) {
-			offset -= iov->iov_len;
-			continue;
-		}
-		copy = min_t(unsigned int, iov->iov_len - offset, len);
-		if (copy_to_user(iov->iov_base + offset, kdata, copy))
-			return -EFAULT;
-		offset = 0;
-		kdata += copy;
-		len -= copy;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(memcpy_toiovecend);
-
-/*
  *	Copy iovec to kernel. Returns -EFAULT on error.
  */
 
-- 
2.1.4

Re: [PATCH v2 17/18] vhost: don't bother copying iovecs in handle_rx(), kill memcpy_toiovecend()

[Michael S. Tsirkin]

On Mon, Feb 02, 2015 at 07:59:36AM +0000, Al Viro wrote:
> From: Al Viro <viro@zeniv.linux.org.uk>
> 
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: kvm@vger.kernel.org
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
> ---

So this made me notice a bug in vhost introduced in 3.19.
I sent a patch for that, this one will have to be
rebased on top. Otherwise:

Acked-by: Michael S. Tsirkin <mst@redhat.com>

But, can you pls copy virtualization@lists.linux-foundation.org ?
I think some guys working on virtio might only hang out there.



>  drivers/vhost/net.c | 79 ++++++++++++++---------------------------------------
>  include/linux/uio.h |  3 --
>  lib/iovec.c         | 26 ------------------
>  3 files changed, 20 insertions(+), 88 deletions(-)
> 
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index d86cc9b..73c0ebf 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -84,10 +84,6 @@ struct vhost_net_ubuf_ref {
>  
>  struct vhost_net_virtqueue {
>  	struct vhost_virtqueue vq;
> -	/* hdr is used to store the virtio header.
> -	 * Since each iovec has >= 1 byte length, we never need more than
> -	 * header length entries to store the header. */
> -	struct iovec hdr[sizeof(struct virtio_net_hdr_mrg_rxbuf)];
>  	size_t vhost_hlen;
>  	size_t sock_hlen;
>  	/* vhost zerocopy support fields below: */
> @@ -235,44 +231,6 @@ static bool vhost_sock_zcopy(struct socket *sock)
>  		sock_flag(sock->sk, SOCK_ZEROCOPY);
>  }
>  
> -/* Pop first len bytes from iovec. Return number of segments used. */
> -static int move_iovec_hdr(struct iovec *from, struct iovec *to,
> -			  size_t len, int iov_count)
> -{
> -	int seg = 0;
> -	size_t size;
> -
> -	while (len && seg < iov_count) {
> -		size = min(from->iov_len, len);
> -		to->iov_base = from->iov_base;
> -		to->iov_len = size;
> -		from->iov_len -= size;
> -		from->iov_base += size;
> -		len -= size;
> -		++from;
> -		++to;
> -		++seg;
> -	}
> -	return seg;
> -}
> -/* Copy iovec entries for len bytes from iovec. */
> -static void copy_iovec_hdr(const struct iovec *from, struct iovec *to,
> -			   size_t len, int iovcount)
> -{
> -	int seg = 0;
> -	size_t size;
> -
> -	while (len && seg < iovcount) {
> -		size = min(from->iov_len, len);
> -		to->iov_base = from->iov_base;
> -		to->iov_len = size;
> -		len -= size;
> -		++from;
> -		++to;
> -		++seg;
> -	}
> -}
> -
>  /* In case of DMA done not in order in lower device driver for some reason.
>   * upend_idx is used to track end of used idx, done_idx is used to track head
>   * of used idx. Once lower device DMA done contiguously, we will signal KVM
> @@ -570,9 +528,9 @@ static void handle_rx(struct vhost_net *net)
>  		.msg_controllen = 0,
>  		.msg_flags = MSG_DONTWAIT,
>  	};
> -	struct virtio_net_hdr_mrg_rxbuf hdr = {
> -		.hdr.flags = 0,
> -		.hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE
> +	struct virtio_net_hdr hdr = {
> +		.flags = 0,
> +		.gso_type = VIRTIO_NET_HDR_GSO_NONE
>  	};
>  	size_t total_len = 0;
>  	int err, mergeable;
> @@ -580,6 +538,7 @@ static void handle_rx(struct vhost_net *net)
>  	size_t vhost_hlen, sock_hlen;
>  	size_t vhost_len, sock_len;
>  	struct socket *sock;
> +	struct iov_iter fixup;
>  
>  	mutex_lock(&vq->mutex);
>  	sock = vq->private_data;
> @@ -624,14 +583,17 @@ static void handle_rx(struct vhost_net *net)
>  			break;
>  		}
>  		/* We don't need to be notified again. */
> -		if (unlikely((vhost_hlen)))
> -			/* Skip header. TODO: support TSO. */
> -			move_iovec_hdr(vq->iov, nvq->hdr, vhost_hlen, in);
> -		else
> -			/* Copy the header for use in VIRTIO_NET_F_MRG_RXBUF:
> -			 * needed because recvmsg can modify msg_iov. */
> -			copy_iovec_hdr(vq->iov, nvq->hdr, sock_hlen, in);
> -		iov_iter_init(&msg.msg_iter, READ, vq->iov, in, sock_len);
> +		iov_iter_init(&msg.msg_iter, READ, vq->iov, in, vhost_len);
> +		fixup = msg.msg_iter;
> +		if (unlikely((vhost_hlen))) {
> +			/* We will supply the header ourselves
> +			 * TODO: support TSO. */
> +			iov_iter_advance(&msg.msg_iter, vhost_hlen);
> +		} else {
> +			/* It'll come from socket; we'll need to patch
> +			 * ->num_buffers over if VIRTIO_NET_F_MRG_RXBUF */
> +			iov_iter_advance(&fixup, sizeof(hdr));
> +		}
>  		err = sock->ops->recvmsg(NULL, sock, &msg,
>  					 sock_len, MSG_DONTWAIT | MSG_TRUNC);
>  		/* Userspace might have consumed the packet meanwhile:
> @@ -643,18 +605,17 @@ static void handle_rx(struct vhost_net *net)
>  			vhost_discard_vq_desc(vq, headcount);
>  			continue;
>  		}
> +		/* Supply virtio_net_hdr if VHOST_NET_F_VIRTIO_NET_HDR */
>  		if (unlikely(vhost_hlen) &&
> -		    memcpy_toiovecend(nvq->hdr, (unsigned char *)&hdr, 0,
> -				      vhost_hlen)) {
> +		    copy_to_iter(&hdr, sizeof(hdr), &fixup) != sizeof(hdr)) {

BTW, all iovecs are pre-validated in vhost core.
I'd like to add __copy_to_iter and __copy_from_iter that are the same
but skip the extra checks, and use that everywhere in vhost (shouln't
matter here specifically, because we don't hit this path).
>From experience, this helps gcc optimize the code resulting
in measureable performance gains.
Comments? Will you be ok with a patch like this?


>  			vq_err(vq, "Unable to write vnet_hdr at addr %p\n",
>  			       vq->iov->iov_base);
>  			break;
>  		}
> -		/* TODO: Should check and handle checksum. */
> +		/* Supply (or replace) ->num_buffers if VIRTIO_NET_F_MRG_RXBUF
> +		 * TODO: Should check and handle checksum. */
>  		if (likely(mergeable) &&
> -		    memcpy_toiovecend(nvq->hdr, (unsigned char *)&headcount,
> -				      offsetof(typeof(hdr), num_buffers),
> -				      sizeof hdr.num_buffers)) {
> +		    copy_to_iter(&headcount, 2, &fixup) != 2) {
>  			vq_err(vq, "Failed num_buffers write");
>  			vhost_discard_vq_desc(vq, headcount);
>  			break;

This made me notice we have a bug: native-endianness integer is copied out to guest.
I sent a patch, hope it'll make it in 3.19.


> diff --git a/include/linux/uio.h b/include/linux/uio.h
> index af3439f..02bd8a9 100644
> --- a/include/linux/uio.h
> +++ b/include/linux/uio.h
> @@ -137,7 +137,4 @@ size_t csum_and_copy_from_iter(void *addr, size_t bytes, __wsum *csum, struct io
>  
>  int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
>  			int offset, int len);
> -int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
> -		      int offset, int len);
> -
>  #endif
> diff --git a/lib/iovec.c b/lib/iovec.c
> index 4a90875..d8f17a9 100644
> --- a/lib/iovec.c
> +++ b/lib/iovec.c
> @@ -3,32 +3,6 @@
>  #include <linux/uio.h>
>  
>  /*
> - *	Copy kernel to iovec. Returns -EFAULT on error.
> - */
> -
> -int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata,
> -		      int offset, int len)
> -{
> -	int copy;
> -	for (; len > 0; ++iov) {
> -		/* Skip over the finished iovecs */
> -		if (unlikely(offset >= iov->iov_len)) {
> -			offset -= iov->iov_len;
> -			continue;
> -		}
> -		copy = min_t(unsigned int, iov->iov_len - offset, len);
> -		if (copy_to_user(iov->iov_base + offset, kdata, copy))
> -			return -EFAULT;
> -		offset = 0;
> -		kdata += copy;
> -		len -= copy;
> -	}
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(memcpy_toiovecend);
> -
> -/*
>   *	Copy iovec to kernel. Returns -EFAULT on error.
>   */
>  
> -- 
> 2.1.4

Re: [PATCH v2 17/18] vhost: don't bother copying iovecs in handle_rx(), kill memcpy_toiovecend()

[Michael S. Tsirkin]

On Mon, Feb 02, 2015 at 07:59:36AM +0000, Al Viro wrote:
> From: Al Viro <viro@zeniv.linux.org.uk>
> 
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: kvm@vger.kernel.org
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
> ---
>  drivers/vhost/net.c | 79 ++++++++++++++---------------------------------------
>  include/linux/uio.h |  3 --
>  lib/iovec.c         | 26 ------------------
>  3 files changed, 20 insertions(+), 88 deletions(-)
> 
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index d86cc9b..73c0ebf 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -84,10 +84,6 @@ struct vhost_net_ubuf_ref {
>  
>  struct vhost_net_virtqueue {
>  	struct vhost_virtqueue vq;
> -	/* hdr is used to store the virtio header.
> -	 * Since each iovec has >= 1 byte length, we never need more than
> -	 * header length entries to store the header. */
> -	struct iovec hdr[sizeof(struct virtio_net_hdr_mrg_rxbuf)];
>  	size_t vhost_hlen;
>  	size_t sock_hlen;
>  	/* vhost zerocopy support fields below: */
> @@ -235,44 +231,6 @@ static bool vhost_sock_zcopy(struct socket *sock)
>  		sock_flag(sock->sk, SOCK_ZEROCOPY);
>  }
>  
> -/* Pop first len bytes from iovec. Return number of segments used. */
> -static int move_iovec_hdr(struct iovec *from, struct iovec *to,
> -			  size_t len, int iov_count)
> -{
> -	int seg = 0;
> -	size_t size;
> -
> -	while (len && seg < iov_count) {
> -		size = min(from->iov_len, len);
> -		to->iov_base = from->iov_base;
> -		to->iov_len = size;
> -		from->iov_len -= size;
> -		from->iov_base += size;
> -		len -= size;
> -		++from;
> -		++to;
> -		++seg;
> -	}
> -	return seg;
> -}
> -/* Copy iovec entries for len bytes from iovec. */
> -static void copy_iovec_hdr(const struct iovec *from, struct iovec *to,
> -			   size_t len, int iovcount)
> -{
> -	int seg = 0;
> -	size_t size;
> -
> -	while (len && seg < iovcount) {
> -		size = min(from->iov_len, len);
> -		to->iov_base = from->iov_base;
> -		to->iov_len = size;
> -		len -= size;
> -		++from;
> -		++to;
> -		++seg;
> -	}
> -}
> -
>  /* In case of DMA done not in order in lower device driver for some reason.
>   * upend_idx is used to track end of used idx, done_idx is used to track head
>   * of used idx. Once lower device DMA done contiguously, we will signal KVM
> @@ -570,9 +528,9 @@ static void handle_rx(struct vhost_net *net)
>  		.msg_controllen = 0,
>  		.msg_flags = MSG_DONTWAIT,
>  	};
> -	struct virtio_net_hdr_mrg_rxbuf hdr = {
> -		.hdr.flags = 0,
> -		.hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE
> +	struct virtio_net_hdr hdr = {
> +		.flags = 0,
> +		.gso_type = VIRTIO_NET_HDR_GSO_NONE
>  	};
>  	size_t total_len = 0;
>  	int err, mergeable;
> @@ -580,6 +538,7 @@ static void handle_rx(struct vhost_net *net)
>  	size_t vhost_hlen, sock_hlen;
>  	size_t vhost_len, sock_len;
>  	struct socket *sock;
> +	struct iov_iter fixup;
>  
>  	mutex_lock(&vq->mutex);
>  	sock = vq->private_data;
> @@ -624,14 +583,17 @@ static void handle_rx(struct vhost_net *net)
>  			break;
>  		}
>  		/* We don't need to be notified again. */
> -		if (unlikely((vhost_hlen)))
> -			/* Skip header. TODO: support TSO. */
> -			move_iovec_hdr(vq->iov, nvq->hdr, vhost_hlen, in);
> -		else
> -			/* Copy the header for use in VIRTIO_NET_F_MRG_RXBUF:
> -			 * needed because recvmsg can modify msg_iov. */
> -			copy_iovec_hdr(vq->iov, nvq->hdr, sock_hlen, in);
> -		iov_iter_init(&msg.msg_iter, READ, vq->iov, in, sock_len);
> +		iov_iter_init(&msg.msg_iter, READ, vq->iov, in, vhost_len);
> +		fixup = msg.msg_iter;
> +		if (unlikely((vhost_hlen))) {
> +			/* We will supply the header ourselves
> +			 * TODO: support TSO. */
> +			iov_iter_advance(&msg.msg_iter, vhost_hlen);
> +		} else {
> +			/* It'll come from socket; we'll need to patch
> +			 * ->num_buffers over if VIRTIO_NET_F_MRG_RXBUF */
> +			iov_iter_advance(&fixup, sizeof(hdr));
> +		}
>  		err = sock->ops->recvmsg(NULL, sock, &msg,
>  					 sock_len, MSG_DONTWAIT | MSG_TRUNC);
>  		/* Userspace might have consumed the packet meanwhile:


Hmm having second thoughts here.
Will this modify the iov in vq->iov?
If yes, how will recvmsg fill it?




> @@ -643,18 +605,17 @@ static void handle_rx(struct vhost_net *net)
>  			vhost_discard_vq_desc(vq, headcount);
>  			continue;
>  		}
> +		/* Supply virtio_net_hdr if VHOST_NET_F_VIRTIO_NET_HDR */
>  		if (unlikely(vhost_hlen) &&
> -		    memcpy_toiovecend(nvq->hdr, (unsigned char *)&hdr, 0,
> -				      vhost_hlen)) {
> +		    copy_to_iter(&hdr, sizeof(hdr), &fixup) != sizeof(hdr)) {
>  			vq_err(vq, "Unable to write vnet_hdr at addr %p\n",
>  			       vq->iov->iov_base);
>  			break;
>  		}
> -		/* TODO: Should check and handle checksum. */
> +		/* Supply (or replace) ->num_buffers if VIRTIO_NET_F_MRG_RXBUF
> +		 * TODO: Should check and handle checksum. */
>  		if (likely(mergeable) &&
> -		    memcpy_toiovecend(nvq->hdr, (unsigned char *)&headcount,
> -				      offsetof(typeof(hdr), num_buffers),
> -				      sizeof hdr.num_buffers)) {
> +		    copy_to_iter(&headcount, 2, &fixup) != 2) {
>  			vq_err(vq, "Failed num_buffers write");
>  			vhost_discard_vq_desc(vq, headcount);
>  			break;

Here, if recvmsg modified the iov, how does copy_to_iter
see the header?


> diff --git a/include/linux/uio.h b/include/linux/uio.h
> index af3439f..02bd8a9 100644
> --- a/include/linux/uio.h
> +++ b/include/linux/uio.h
> @@ -137,7 +137,4 @@ size_t csum_and_copy_from_iter(void *addr, size_t bytes, __wsum *csum, struct io
>  
>  int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
>  			int offset, int len);
> -int memcpy_toiovecend(const struct iovec *v, unsigned char *kdata,
> -		      int offset, int len);
> -
>  #endif
> diff --git a/lib/iovec.c b/lib/iovec.c
> index 4a90875..d8f17a9 100644
> --- a/lib/iovec.c
> +++ b/lib/iovec.c
> @@ -3,32 +3,6 @@
>  #include <linux/uio.h>
>  
>  /*
> - *	Copy kernel to iovec. Returns -EFAULT on error.
> - */
> -
> -int memcpy_toiovecend(const struct iovec *iov, unsigned char *kdata,
> -		      int offset, int len)
> -{
> -	int copy;
> -	for (; len > 0; ++iov) {
> -		/* Skip over the finished iovecs */
> -		if (unlikely(offset >= iov->iov_len)) {
> -			offset -= iov->iov_len;
> -			continue;
> -		}
> -		copy = min_t(unsigned int, iov->iov_len - offset, len);
> -		if (copy_to_user(iov->iov_base + offset, kdata, copy))
> -			return -EFAULT;
> -		offset = 0;
> -		kdata += copy;
> -		len -= copy;
> -	}
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(memcpy_toiovecend);
> -
> -/*
>   *	Copy iovec to kernel. Returns -EFAULT on error.
>   */
>  
> -- 
> 2.1.4

Re: [PATCH v2 17/18] vhost: don't bother copying iovecs in handle_rx(), kill memcpy_toiovecend()

[Michael S. Tsirkin]

> Hmm having second thoughts here.
> Will this modify the iov in vq->iov?
> If yes, how will recvmsg fill it?

OK that was just me misunderstanding what the
function does. As it doesn't modify the iovec itself,
I think there's no issue, my ack stands.

Re: [PATCH v2 17/18] vhost: don't bother copying iovecs in handle_rx(), kill memcpy_toiovecend()

[Al Viro]

On Tue, Feb 03, 2015 at 04:21:54PM +0100, Michael S. Tsirkin wrote:
> > Hmm having second thoughts here.
> > Will this modify the iov in vq->iov?
> > If yes, how will recvmsg fill it?
> 
> OK that was just me misunderstanding what the
> function does. As it doesn't modify the iovec itself,
> I think there's no issue, my ack stands.

That, BTW, was the point of switching ->sendmsg() and ->recvmsg() to
iov_iter primitives - not only do memcpy_toiovec() et.al. change the
iovec, the way it's done was protocol-dependent, up to and including
the things like "have sent 60 caller-supplied bytes, iovec modified
with only 6 bytes consumed".  What's worse, on TCP sendmsg we usually
left iovec unchanged, but sometimes it got drained.  Granted, that
happened only after setsockopt() playing caller with TCP_REPAIR (i.e.
checkpoint/restart stuff), but...

[PATCH v2 18/18] vhost: vhost_scsi_handle_vq() should just use copy_from_user()

[Al Viro]

From: Al Viro <viro@zeniv.linux.org.uk>

it has just verified that it asks no more than the length of the
first segment of iovec.

And with that the last user of stuff in lib/iovec.c is gone.
RIP.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
Cc: kvm@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
---
 drivers/vhost/scsi.c |  2 +-
 include/linux/uio.h  |  2 --
 lib/Makefile         |  2 +-
 lib/iovec.c          | 36 ------------------------------------
 4 files changed, 2 insertions(+), 40 deletions(-)
 delete mode 100644 lib/iovec.c

diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
index d695b16..dc78d87 100644
--- a/drivers/vhost/scsi.c
+++ b/drivers/vhost/scsi.c
@@ -1079,7 +1079,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq)
 			       req_size, vq->iov[0].iov_len);
 			break;
 		}
-		ret = memcpy_fromiovecend(req, &vq->iov[0], 0, req_size);
+		ret = copy_from_user(req, vq->iov[0].iov_base, req_size);
 		if (unlikely(ret)) {
 			vq_err(vq, "Faulted on virtio_scsi_cmd_req\n");
 			break;
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 02bd8a9..3e0cb4e 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -135,6 +135,4 @@ static inline void iov_iter_reexpand(struct iov_iter *i, size_t count)
 size_t csum_and_copy_to_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i);
 size_t csum_and_copy_from_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i);
 
-int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
-			int offset, int len);
 #endif
diff --git a/lib/Makefile b/lib/Makefile
index 3c3b30b..1071d06 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -24,7 +24,7 @@ obj-y	+= lockref.o
 
 obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
 	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
-	 gcd.o lcm.o list_sort.o uuid.o flex_array.o iovec.o clz_ctz.o \
+	 gcd.o lcm.o list_sort.o uuid.o flex_array.o clz_ctz.o \
 	 bsearch.o find_last_bit.o find_next_bit.o llist.o memweight.o kfifo.o \
 	 percpu-refcount.o percpu_ida.o rhashtable.o reciprocal_div.o
 obj-y += string_helpers.o
diff --git a/lib/iovec.c b/lib/iovec.c
deleted file mode 100644
index d8f17a9..0000000
--- a/lib/iovec.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <linux/uaccess.h>
-#include <linux/export.h>
-#include <linux/uio.h>
-
-/*
- *	Copy iovec to kernel. Returns -EFAULT on error.
- */
-
-int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
-			int offset, int len)
-{
-	/* No data? Done! */
-	if (len == 0)
-		return 0;
-
-	/* Skip over the finished iovecs */
-	while (offset >= iov->iov_len) {
-		offset -= iov->iov_len;
-		iov++;
-	}
-
-	while (len > 0) {
-		u8 __user *base = iov->iov_base + offset;
-		int copy = min_t(unsigned int, len, iov->iov_len - offset);
-
-		offset = 0;
-		if (copy_from_user(kdata, base, copy))
-			return -EFAULT;
-		len -= copy;
-		kdata += copy;
-		iov++;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(memcpy_fromiovecend);
-- 
2.1.4

Re: [PATCH v2 18/18] vhost: vhost_scsi_handle_vq() should just use copy_from_user()

[Nicholas A. Bellinger]

Hi Al,

On Mon, 2015-02-02 at 07:59 +0000, Al Viro wrote:
> From: Al Viro <viro@zeniv.linux.org.uk>
> 
> it has just verified that it asks no more than the length of the
> first segment of iovec.
> 
> And with that the last user of stuff in lib/iovec.c is gone.
> RIP.
> 
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
> Cc: kvm@vger.kernel.org
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
> ---
>  drivers/vhost/scsi.c |  2 +-
>  include/linux/uio.h  |  2 --
>  lib/Makefile         |  2 +-
>  lib/iovec.c          | 36 ------------------------------------
>  4 files changed, 2 insertions(+), 40 deletions(-)
>  delete mode 100644 lib/iovec.c
> 
> diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
> index d695b16..dc78d87 100644
> --- a/drivers/vhost/scsi.c
> +++ b/drivers/vhost/scsi.c
> @@ -1079,7 +1079,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq)
>  			       req_size, vq->iov[0].iov_len);
>  			break;
>  		}
> -		ret = memcpy_fromiovecend(req, &vq->iov[0], 0, req_size);
> +		ret = copy_from_user(req, vq->iov[0].iov_base, req_size);
>  		if (unlikely(ret)) {
>  			vq_err(vq, "Faulted on virtio_scsi_cmd_req\n");
>  			break;

Is this in for-next yet..?

If not, please push out ASAP so SFR can hit the conflict between
target-pending/for-next as a heads up for Linus..

--nab

Re: [PATCH v2 18/18] vhost: vhost_scsi_handle_vq() should just use copy_from_user()

[Michael S. Tsirkin]

On Mon, Feb 02, 2015 at 07:59:37AM +0000, Al Viro wrote:
> From: Al Viro <viro@zeniv.linux.org.uk>
> 
> it has just verified that it asks no more than the length of the
> first segment of iovec.
> 
> And with that the last user of stuff in lib/iovec.c is gone.
> RIP.
> 
> Cc: Michael S. Tsirkin <mst@redhat.com>
> Cc: Nicholas A. Bellinger <nab@linux-iscsi.org>
> Cc: kvm@vger.kernel.org
> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

BTW it should really be __copy_from_user since the iovec
is pre-validated by vhost core.

Still Nicholas is rewriting it all anyway, so not worth the
time to optimize it, so

Acked-by: Michael S. Tsirkin <mst@redhat.com>

But, can you pls copy virtualization@lists.linux-foundation.org ?
I think some guys working on virtio might only hang out there.

> ---
>  drivers/vhost/scsi.c |  2 +-
>  include/linux/uio.h  |  2 --
>  lib/Makefile         |  2 +-
>  lib/iovec.c          | 36 ------------------------------------
>  4 files changed, 2 insertions(+), 40 deletions(-)
>  delete mode 100644 lib/iovec.c
> 
> diff --git a/drivers/vhost/scsi.c b/drivers/vhost/scsi.c
> index d695b16..dc78d87 100644
> --- a/drivers/vhost/scsi.c
> +++ b/drivers/vhost/scsi.c
> @@ -1079,7 +1079,7 @@ vhost_scsi_handle_vq(struct vhost_scsi *vs, struct vhost_virtqueue *vq)
>  			       req_size, vq->iov[0].iov_len);
>  			break;
>  		}
> -		ret = memcpy_fromiovecend(req, &vq->iov[0], 0, req_size);
> +		ret = copy_from_user(req, vq->iov[0].iov_base, req_size);
>  		if (unlikely(ret)) {
>  			vq_err(vq, "Faulted on virtio_scsi_cmd_req\n");
>  			break;
> diff --git a/include/linux/uio.h b/include/linux/uio.h
> index 02bd8a9..3e0cb4e 100644
> --- a/include/linux/uio.h
> +++ b/include/linux/uio.h
> @@ -135,6 +135,4 @@ static inline void iov_iter_reexpand(struct iov_iter *i, size_t count)
>  size_t csum_and_copy_to_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i);
>  size_t csum_and_copy_from_iter(void *addr, size_t bytes, __wsum *csum, struct iov_iter *i);
>  
> -int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
> -			int offset, int len);
>  #endif
> diff --git a/lib/Makefile b/lib/Makefile
> index 3c3b30b..1071d06 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -24,7 +24,7 @@ obj-y	+= lockref.o
>  
>  obj-y += bcd.o div64.o sort.o parser.o halfmd4.o debug_locks.o random32.o \
>  	 bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
> -	 gcd.o lcm.o list_sort.o uuid.o flex_array.o iovec.o clz_ctz.o \
> +	 gcd.o lcm.o list_sort.o uuid.o flex_array.o clz_ctz.o \
>  	 bsearch.o find_last_bit.o find_next_bit.o llist.o memweight.o kfifo.o \
>  	 percpu-refcount.o percpu_ida.o rhashtable.o reciprocal_div.o
>  obj-y += string_helpers.o
> diff --git a/lib/iovec.c b/lib/iovec.c
> deleted file mode 100644
> index d8f17a9..0000000
> --- a/lib/iovec.c
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -#include <linux/uaccess.h>
> -#include <linux/export.h>
> -#include <linux/uio.h>
> -
> -/*
> - *	Copy iovec to kernel. Returns -EFAULT on error.
> - */
> -
> -int memcpy_fromiovecend(unsigned char *kdata, const struct iovec *iov,
> -			int offset, int len)
> -{
> -	/* No data? Done! */
> -	if (len == 0)
> -		return 0;
> -
> -	/* Skip over the finished iovecs */
> -	while (offset >= iov->iov_len) {
> -		offset -= iov->iov_len;
> -		iov++;
> -	}
> -
> -	while (len > 0) {
> -		u8 __user *base = iov->iov_base + offset;
> -		int copy = min_t(unsigned int, len, iov->iov_len - offset);
> -
> -		offset = 0;
> -		if (copy_from_user(kdata, base, copy))
> -			return -EFAULT;
> -		len -= copy;
> -		kdata += copy;
> -		iov++;
> -	}
> -
> -	return 0;
> -}
> -EXPORT_SYMBOL(memcpy_fromiovecend);
> -- 
> 2.1.4