From: Borislav Petkov <bp@suse.de>
To: Andy Lutomirski <luto@kernel.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>,
kvm@vger.kernel.org, Peter Zijlstra <peterz@infradead.org>,
x86@kernel.org, linux-kernel@vger.kernel.org,
Ralf Baechle <ralf@linux-mips.org>,
virtualization@lists.linux-foundation.org,
Huang Rui <ray.huang@amd.com>,
John Stultz <john.stultz@linaro.org>, Len Brown <lenb@kernel.org>
Subject: Re: [PATCH v3 03/18] x86/tsc/paravirt: Remove the read_tsc and read_tscp paravirt hooks
Date: Wed, 17 Jun 2015 11:56:19 +0200 [thread overview]
Message-ID: <20150617095619.GD26661@pd.tnic> (raw)
In-Reply-To: <d08a2600fb298af163681e5efd8e599d889a5b97.1434501121.git.luto@kernel.org>
+ paravirt list.
On Tue, Jun 16, 2015 at 05:35:51PM -0700, Andy Lutomirski wrote:
> We've had read_tsc and read_tscp paravirt hooks since the very
> beginning of paravirt, i.e., d3561b7fa0fb ("[PATCH] paravirt: header
> and stubs for paravirtualisation"). AFAICT the only paravirt guest
> implementation that ever replaced these calls was vmware, and it's
> gone. Arguably even vmware shouldn't have hooked rdtsc -- we fully
> support systems that don't have a TSC at all, so there's no point
> for a paravirt implementation to pretend that we have a TSC but to
> replace it.
>
> I also doubt that these hooks actually worked. Calls to rdtscl and
> rdtscll, which respected the hooks, were used seemingly
> interchangeably with native_read_tsc, which did not.
>
> Just remove them. If anyone ever needs them again, they can try
> to make a case for why they need them.
>
> Before, on a paravirt config:
> text data bss dec hex filename
> 13426505 1827056 14508032 29761593 1c62039 vmlinux
>
> After:
> text data bss dec hex filename
> 13426617 1827056 14508032 29761705 1c620a9 vmlinux
>
> Signed-off-by: Andy Lutomirski <luto@kernel.org>
> ---
> arch/x86/include/asm/msr.h | 16 ++++++++--------
> arch/x86/include/asm/paravirt.h | 34 ----------------------------------
> arch/x86/include/asm/paravirt_types.h | 2 --
> arch/x86/kernel/paravirt.c | 2 --
> arch/x86/kernel/paravirt_patch_32.c | 2 --
> arch/x86/xen/enlighten.c | 3 ---
> 6 files changed, 8 insertions(+), 51 deletions(-)
Nice diffstat.
Acked-by: Borislav Petkov <bp@suse.de>
(leaving in the rest for reference)
> diff --git a/arch/x86/include/asm/msr.h b/arch/x86/include/asm/msr.h
> index 88711470af7f..d1afac7df484 100644
> --- a/arch/x86/include/asm/msr.h
> +++ b/arch/x86/include/asm/msr.h
> @@ -178,12 +178,6 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
> return err;
> }
>
> -#define rdtscl(low) \
> - ((low) = (u32)native_read_tsc())
> -
> -#define rdtscll(val) \
> - ((val) = native_read_tsc())
> -
> #define rdpmc(counter, low, high) \
> do { \
> u64 _l = native_read_pmc((counter)); \
> @@ -193,6 +187,14 @@ do { \
>
> #define rdpmcl(counter, val) ((val) = native_read_pmc(counter))
>
> +#endif /* !CONFIG_PARAVIRT */
> +
> +#define rdtscl(low) \
> + ((low) = (u32)native_read_tsc())
> +
> +#define rdtscll(val) \
> + ((val) = native_read_tsc())
> +
> #define rdtscp(low, high, aux) \
> do { \
> unsigned long long _val = native_read_tscp(&(aux)); \
> @@ -202,8 +204,6 @@ do { \
>
> #define rdtscpll(val, aux) (val) = native_read_tscp(&(aux))
>
> -#endif /* !CONFIG_PARAVIRT */
> -
> /*
> * 64-bit version of wrmsr_safe():
> */
> diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
> index d143bfad45d7..c2be0375bcad 100644
> --- a/arch/x86/include/asm/paravirt.h
> +++ b/arch/x86/include/asm/paravirt.h
> @@ -174,19 +174,6 @@ static inline int rdmsrl_safe(unsigned msr, unsigned long long *p)
> return err;
> }
>
> -static inline u64 paravirt_read_tsc(void)
> -{
> - return PVOP_CALL0(u64, pv_cpu_ops.read_tsc);
> -}
> -
> -#define rdtscl(low) \
> -do { \
> - u64 _l = paravirt_read_tsc(); \
> - low = (int)_l; \
> -} while (0)
> -
> -#define rdtscll(val) (val = paravirt_read_tsc())
> -
> static inline unsigned long long paravirt_sched_clock(void)
> {
> return PVOP_CALL0(unsigned long long, pv_time_ops.sched_clock);
> @@ -215,27 +202,6 @@ do { \
>
> #define rdpmcl(counter, val) ((val) = paravirt_read_pmc(counter))
>
> -static inline unsigned long long paravirt_rdtscp(unsigned int *aux)
> -{
> - return PVOP_CALL1(u64, pv_cpu_ops.read_tscp, aux);
> -}
> -
> -#define rdtscp(low, high, aux) \
> -do { \
> - int __aux; \
> - unsigned long __val = paravirt_rdtscp(&__aux); \
> - (low) = (u32)__val; \
> - (high) = (u32)(__val >> 32); \
> - (aux) = __aux; \
> -} while (0)
> -
> -#define rdtscpll(val, aux) \
> -do { \
> - unsigned long __aux; \
> - val = paravirt_rdtscp(&__aux); \
> - (aux) = __aux; \
> -} while (0)
> -
> static inline void paravirt_alloc_ldt(struct desc_struct *ldt, unsigned entries)
> {
> PVOP_VCALL2(pv_cpu_ops.alloc_ldt, ldt, entries);
> diff --git a/arch/x86/include/asm/paravirt_types.h b/arch/x86/include/asm/paravirt_types.h
> index a6b8f9fadb06..ce029e4fa7c6 100644
> --- a/arch/x86/include/asm/paravirt_types.h
> +++ b/arch/x86/include/asm/paravirt_types.h
> @@ -156,9 +156,7 @@ struct pv_cpu_ops {
> u64 (*read_msr)(unsigned int msr, int *err);
> int (*write_msr)(unsigned int msr, unsigned low, unsigned high);
>
> - u64 (*read_tsc)(void);
> u64 (*read_pmc)(int counter);
> - unsigned long long (*read_tscp)(unsigned int *aux);
>
> #ifdef CONFIG_X86_32
> /*
> diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
> index 58bcfb67c01f..f68e48f5f6c2 100644
> --- a/arch/x86/kernel/paravirt.c
> +++ b/arch/x86/kernel/paravirt.c
> @@ -351,9 +351,7 @@ __visible struct pv_cpu_ops pv_cpu_ops = {
> .wbinvd = native_wbinvd,
> .read_msr = native_read_msr_safe,
> .write_msr = native_write_msr_safe,
> - .read_tsc = native_read_tsc,
> .read_pmc = native_read_pmc,
> - .read_tscp = native_read_tscp,
> .load_tr_desc = native_load_tr_desc,
> .set_ldt = native_set_ldt,
> .load_gdt = native_load_gdt,
> diff --git a/arch/x86/kernel/paravirt_patch_32.c b/arch/x86/kernel/paravirt_patch_32.c
> index e1b013696dde..c89f50a76e97 100644
> --- a/arch/x86/kernel/paravirt_patch_32.c
> +++ b/arch/x86/kernel/paravirt_patch_32.c
> @@ -10,7 +10,6 @@ DEF_NATIVE(pv_mmu_ops, read_cr2, "mov %cr2, %eax");
> DEF_NATIVE(pv_mmu_ops, write_cr3, "mov %eax, %cr3");
> DEF_NATIVE(pv_mmu_ops, read_cr3, "mov %cr3, %eax");
> DEF_NATIVE(pv_cpu_ops, clts, "clts");
> -DEF_NATIVE(pv_cpu_ops, read_tsc, "rdtsc");
>
> #if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS)
> DEF_NATIVE(pv_lock_ops, queued_spin_unlock, "movb $0, (%eax)");
> @@ -52,7 +51,6 @@ unsigned native_patch(u8 type, u16 clobbers, void *ibuf,
> PATCH_SITE(pv_mmu_ops, read_cr3);
> PATCH_SITE(pv_mmu_ops, write_cr3);
> PATCH_SITE(pv_cpu_ops, clts);
> - PATCH_SITE(pv_cpu_ops, read_tsc);
> #if defined(CONFIG_PARAVIRT_SPINLOCKS) && defined(CONFIG_QUEUED_SPINLOCKS)
> case PARAVIRT_PATCH(pv_lock_ops.queued_spin_unlock):
> if (pv_is_native_spin_unlock()) {
> diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
> index 0b95c9b8283f..32136bfca43f 100644
> --- a/arch/x86/xen/enlighten.c
> +++ b/arch/x86/xen/enlighten.c
> @@ -1175,11 +1175,8 @@ static const struct pv_cpu_ops xen_cpu_ops __initconst = {
> .read_msr = xen_read_msr_safe,
> .write_msr = xen_write_msr_safe,
>
> - .read_tsc = native_read_tsc,
> .read_pmc = native_read_pmc,
>
> - .read_tscp = native_read_tscp,
> -
> .iret = xen_iret,
> #ifdef CONFIG_X86_64
> .usergs_sysret32 = xen_sysret32,
> --
> 2.4.2
>
--
Regards/Gruss,
Boris.
ECO tip #101: Trim your mails when you reply.
--
next prev parent reply other threads:[~2015-06-17 9:56 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 0:35 [PATCH v3 00/18] x86/tsc: Clean up rdtsc helpers Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 01/18] x86/tsc: Inline native_read_tsc and remove __native_read_tsc Andy Lutomirski
2015-06-17 9:26 ` Borislav Petkov
2015-07-06 15:39 ` [tip:x86/asm] x86/asm/tsc: Inline native_read_tsc() and remove __native_read_tsc() tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 02/18] x86/msr/kvm: Remove vget_cycles() Andy Lutomirski
2015-06-17 9:42 ` Borislav Petkov
2015-06-17 13:34 ` Paolo Bonzini
2015-07-06 15:40 ` [tip:x86/asm] x86/asm/tsc, kvm: " tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 03/18] x86/tsc/paravirt: Remove the read_tsc and read_tscp paravirt hooks Andy Lutomirski
2015-06-17 9:56 ` Borislav Petkov [this message]
2015-06-19 15:32 ` Borislav Petkov
2015-06-19 16:14 ` Andy Lutomirski
2015-06-19 17:13 ` Borislav Petkov
2015-07-06 15:40 ` [tip:x86/asm] x86/asm/tsc, x86/paravirt: Remove read_tsc() and read_tscp() " tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 04/18] x86/tsc: Replace rdtscll with native_read_tsc Andy Lutomirski
2015-06-17 10:03 ` Borislav Petkov
2015-07-06 15:40 ` [tip:x86/asm] x86/asm/tsc: Replace rdtscll() with native_read_tsc () tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 05/18] x86/tsc: Remove the rdtscp and rdtscpll macros Andy Lutomirski
2015-07-06 15:41 ` [tip:x86/asm] x86/asm/tsc: Remove the rdtscp() and rdtscpll() macros tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 06/18] x86/tsc: Use the full 64-bit tsc in tsc_delay Andy Lutomirski
2015-07-06 15:41 ` [tip:x86/asm] x86/asm/tsc: Use the full 64-bit TSC in delay_tsc() tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 07/18] x86/cpu/amd: Use the full 64-bit TSC to detect the 2.6.2 bug Andy Lutomirski
2015-07-06 15:41 ` [tip:x86/asm] x86/asm/tsc, " tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 08/18] baycom_epp: Replace rdtscl() with native_read_tsc() Andy Lutomirski
2015-06-17 0:49 ` Thomas Sailer
2015-06-20 13:54 ` walter harms
2015-06-20 14:14 ` Thomas Gleixner
2015-06-20 14:26 ` Andy Lutomirski
2015-06-20 16:30 ` Thomas Gleixner
2015-07-06 15:42 ` [tip:x86/asm] x86/asm/tsc, drivers/net/hamradio/baycom_epp: " tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 09/18] staging/lirc_serial: Remove TSC-based timing Andy Lutomirski
2015-07-06 15:42 ` [tip:x86/asm] x86/asm/tsc, " tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 10/18] input/joystick/analog: Switch from rdtscl() to native_read_tsc() Andy Lutomirski
2015-07-06 15:42 ` [tip:x86/asm] x86/asm/tsc, " tip-bot for Andy Lutomirski
2015-06-17 0:35 ` [PATCH v3 11/18] drivers/input/gameport: Replace rdtscl() with native_read_tsc() Andy Lutomirski
2015-07-06 15:43 ` [tip:x86/asm] x86/asm/tsc, drivers/input/gameport: Replace rdtscl () " tip-bot for Andy Lutomirski
2015-06-17 0:36 ` [PATCH v3 12/18] x86/tsc: Remove rdtscl() Andy Lutomirski
2015-07-06 15:43 ` [tip:x86/asm] x86/asm/tsc: " tip-bot for Andy Lutomirski
2015-06-17 0:36 ` [PATCH v3 13/18] x86/tsc: Rename native_read_tsc() to rdtsc() Andy Lutomirski
2015-06-24 21:38 ` Borislav Petkov
2015-07-06 15:43 ` [tip:x86/asm] x86/asm/tsc: " tip-bot for Andy Lutomirski
2015-06-17 0:36 ` [PATCH v3 14/18] x86: Add rdtsc_ordered() and use it in trivial call sites Andy Lutomirski
2015-07-06 15:44 ` [tip:x86/asm] x86/asm/tsc: " tip-bot for Andy Lutomirski
2015-08-21 7:45 ` [tip:x86/asm] x86/asm/tsc: Add rdtscll() merge helper tip-bot for Ingo Molnar
2015-06-17 0:36 ` [PATCH v3 15/18] x86/tsc: Use rdtsc_ordered() in check_tsc_warp() and drop extra barriers Andy Lutomirski
2015-07-06 15:44 ` [tip:x86/asm] x86/asm/tsc/sync: " tip-bot for Andy Lutomirski
2015-06-17 0:36 ` [PATCH v3 16/18] x86/tsc: In read_tsc, use rdtsc_ordered() instead of get_cycles() Andy Lutomirski
2015-07-06 15:44 ` [tip:x86/asm] x86/asm/tsc: Use rdtsc_ordered() in read_tsc() " tip-bot for Andy Lutomirski
2015-06-17 0:36 ` [PATCH v3 17/18] x86/kvm/tsc: Drop extra barrier and use rdtsc_ordered in kvmclock Andy Lutomirski
2015-06-17 7:47 ` Paolo Bonzini
2015-06-17 13:31 ` Paolo Bonzini
2015-06-20 21:50 ` Borislav Petkov
2015-07-06 15:45 ` [tip:x86/asm] x86/asm/tsc, x86/kvm: Drop open-coded barrier and use rdtsc_ordered() " tip-bot for Andy Lutomirski
2015-06-17 0:36 ` [PATCH v3 18/18] x86/tsc: Remove rdtsc_barrier() Andy Lutomirski
2015-07-06 15:45 ` [tip:x86/asm] x86/asm/tsc: " tip-bot for Andy Lutomirski
2015-06-17 11:11 ` [PATCH v3 00/18] x86/tsc: Clean up rdtsc helpers Borislav Petkov
2015-06-17 13:37 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150617095619.GD26661@pd.tnic \
--to=bp@suse.de \
--cc=dvlasenk@redhat.com \
--cc=john.stultz@linaro.org \
--cc=kvm@vger.kernel.org \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@kernel.org \
--cc=peterz@infradead.org \
--cc=ralf@linux-mips.org \
--cc=ray.huang@amd.com \
--cc=virtualization@lists.linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).