From: "Radim Krčmář" <rkrcmar@redhat.com>
To: Wanpeng Li <kernellwp@gmail.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
kvm <kvm@vger.kernel.org>, Paolo Bonzini <pbonzini@redhat.com>,
Wanpeng Li <wanpeng.li@hotmail.com>,
Nadav Amit <nadav.amit@gmail.com>
Subject: [PATCH] KVM: VMX: Fix invalid guest state detection after task-switch emulation
Date: Wed, 19 Jul 2017 13:29:30 +0200 [thread overview]
Message-ID: <20170719112926.GA13502@potion> (raw)
In-Reply-To: <CANRm+CzO3SKWx2s2F0S9_UfZ-uhY+5jCu+LKRsTKFAUxT2DwTw@mail.gmail.com>
2017-07-19 13:34+0800, Wanpeng Li:
> Ping, :)
I misunderstood where the ball is ... is the patch below ok?
---8<---
This can be reproduced by EPT=1, unrestricted_guest=N, emulate_invalid_state=Y
or EPT=0, the trace of kvm-unit-tests/taskswitch2.flat is like below, it
tries to emulate invalid guest state task-switch:
kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)
kvm_entry: vcpu 0
kvm_exit: reason TASK_SWITCH rip 0x0 info 40000058 0
kvm_emulate_insn: 42000:0:0f 0b (0x2)
kvm_emulate_insn: 42000:0:0f 0b (0x2) failed
kvm_inj_exception: #UD (0x0)
It appears that the task-switch emulation updates rflags (and vm86 flag)
only after the segments are loaded, causing vmx->emulation_required to
be set, when in fact invalid guest state emulation is not needed.
This patch fixes it by updating vmx->emulation_required after the rflags
(and vm86 flag) is updated.
Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
[Wanpeng wrote the commit message with initial patch and Radim moved the
update to vmx_set_rflags and added Paolo's suggestion for the check.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
---
arch/x86/kvm/vmx.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 84e62acf2dd8..a776aea0043a 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -2326,6 +2326,11 @@ static void vmx_vcpu_put(struct kvm_vcpu *vcpu)
__vmx_load_host_state(to_vmx(vcpu));
}
+static bool emulation_required(struct kvm_vcpu *vcpu)
+{
+ return emulate_invalid_guest_state && !guest_state_valid(vcpu);
+}
+
static void vmx_decache_cr0_guest_bits(struct kvm_vcpu *vcpu);
/*
@@ -2363,6 +2368,8 @@ static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
{
+ unsigned long old_rflags = to_vmx(vcpu)->rflags;
+
__set_bit(VCPU_EXREG_RFLAGS, (ulong *)&vcpu->arch.regs_avail);
to_vmx(vcpu)->rflags = rflags;
if (to_vmx(vcpu)->rmode.vm86_active) {
@@ -2370,6 +2377,9 @@ static void vmx_set_rflags(struct kvm_vcpu *vcpu, unsigned long rflags)
rflags |= X86_EFLAGS_IOPL | X86_EFLAGS_VM;
}
vmcs_writel(GUEST_RFLAGS, rflags);
+
+ if ((old_rflags ^ rflags) & X86_EFLAGS_VM)
+ to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
}
static u32 vmx_get_pkru(struct kvm_vcpu *vcpu)
@@ -3857,11 +3867,6 @@ static __init int alloc_kvm_area(void)
return 0;
}
-static bool emulation_required(struct kvm_vcpu *vcpu)
-{
- return emulate_invalid_guest_state && !guest_state_valid(vcpu);
-}
-
static void fix_pmode_seg(struct kvm_vcpu *vcpu, int seg,
struct kvm_segment *save)
{
--
2.13.2
next prev parent reply other threads:[~2017-07-19 11:29 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-11 7:13 [PATCH] KVM: VMX: Fix invalid guest state detection after task-switch emulation Wanpeng Li
2017-07-11 15:54 ` Radim Krčmář
2017-07-11 16:09 ` Paolo Bonzini
2017-07-12 13:50 ` Wanpeng Li
2017-07-19 5:34 ` Wanpeng Li
2017-07-19 11:29 ` Radim Krčmář [this message]
2017-07-19 15:14 ` Nadav Amit
2017-07-19 16:19 ` [PATCH v2] " Radim Krčmář
2017-07-19 16:25 ` Nadav Amit
2017-07-19 22:48 ` Wanpeng Li
2017-07-19 22:53 ` Nadav Amit
2017-07-19 23:01 ` Wanpeng Li
2017-07-19 23:06 ` Nadav Amit
2017-07-19 23:09 ` Wanpeng Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170719112926.GA13502@potion \
--to=rkrcmar@redhat.com \
--cc=kernellwp@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nadav.amit@gmail.com \
--cc=pbonzini@redhat.com \
--cc=wanpeng.li@hotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox