From: Christoffer Dall <cdall@linaro.org>
To: Eric Auger <eric.auger@redhat.com>
Cc: eric.auger.pro@gmail.com, linux-kernel@vger.kernel.org,
kvm@vger.kernel.org, marc.zyngier@arm.com,
peter.maydell@linaro.org, andre.przywara@arm.com,
wanghaibin.wang@huawei.com, wu.wubin@huawei.com
Subject: Re: [PATCH v2 03/10] KVM: arm/arm64: vgic-its: Improve error reporting on device table save
Date: Fri, 13 Oct 2017 15:16:18 +0200 [thread overview]
Message-ID: <20171013131618.GH8927@cbox> (raw)
In-Reply-To: <1506518920-18571-4-git-send-email-eric.auger@redhat.com>
On Wed, Sep 27, 2017 at 03:28:33PM +0200, Eric Auger wrote:
> At the moment the device table save() returns -EINVAL if
> vgic_its_check_id() fails to return the gpa of the entry
> associated to the device/collection id. Let vgic_its_check_id()
> return an int instead of a bool and return a more precised
> error value:
> - EINVAL in case the id is out of range
> - EFAULT if the gpa is not provisionned or is not valid
>
This is just to ease debugging, yes?
Seems a bit invasive to me for that purpose.
> We also check first the GITS_BASER<n> Valid bit is set.
>
> This allows the userspace to discriminate failure reasons.
>
> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>
> ---
>
> need to CC stable
Is this solving a real issue that someone has? Otherwise I don't think
it should be cc'ed to stable, nor am I sure it warrants merging as a
fix.
Thanks,
-Christoffer
> ---
> virt/kvm/arm/vgic/vgic-its.c | 53 ++++++++++++++++++++++++++++++--------------
> 1 file changed, 36 insertions(+), 17 deletions(-)
>
> diff --git a/virt/kvm/arm/vgic/vgic-its.c b/virt/kvm/arm/vgic/vgic-its.c
> index 76bed2d..c1f7972 100644
> --- a/virt/kvm/arm/vgic/vgic-its.c
> +++ b/virt/kvm/arm/vgic/vgic-its.c
> @@ -688,14 +688,24 @@ static int vgic_its_cmd_handle_movi(struct kvm *kvm, struct vgic_its *its,
> }
>
> /*
> - * Check whether an ID can be stored into the corresponding guest table.
> + * vgic_its_check_id - Check whether an ID can be stored into
> + * the corresponding guest table.
> + *
> * For a direct table this is pretty easy, but gets a bit nasty for
> * indirect tables. We check whether the resulting guest physical address
> * is actually valid (covered by a memslot and guest accessible).
> * For this we have to read the respective first level entry.
> + *
> + * @its: its handle
> + * @baser: GITS_BASER<n> register
> + * @id: id of the device/collection
> + * @eaddr: output gpa of the corresponding table entry
> + *
> + * Return: 0 on success, -EINVAL if @id is out of range, -EFAULT if
> + * the address cannot be computed or is not valid
> */
> -static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
> - gpa_t *eaddr)
> +static int vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
> + gpa_t *eaddr)
> {
> int l1_tbl_size = GITS_BASER_NR_PAGES(baser) * SZ_64K;
> u64 indirect_ptr, type = GITS_BASER_TYPE(baser);
> @@ -703,50 +713,56 @@ static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
> int index;
> gfn_t gfn;
>
> + if (!(baser & GITS_BASER_VALID))
> + return -EFAULT;
> +
> switch (type) {
> case GITS_BASER_TYPE_DEVICE:
> if (id >= BIT_ULL(VITS_TYPER_DEVBITS))
> - return false;
> + return -EINVAL;
> break;
> case GITS_BASER_TYPE_COLLECTION:
> /* as GITS_TYPER.CIL == 0, ITS supports 16-bit collection ID */
> if (id >= BIT_ULL(16))
> - return false;
> + return -EINVAL;
> break;
> default:
> - return false;
> + return -EINVAL;
> }
>
> if (!(baser & GITS_BASER_INDIRECT)) {
> phys_addr_t addr;
>
> if (id >= (l1_tbl_size / esz))
> - return false;
> + return -EINVAL;
>
> addr = BASER_ADDRESS(baser) + id * esz;
> gfn = addr >> PAGE_SHIFT;
>
> if (eaddr)
> *eaddr = addr;
> - return kvm_is_visible_gfn(its->dev->kvm, gfn);
> + if (kvm_is_visible_gfn(its->dev->kvm, gfn))
> + return 0;
> + else
> + return -EFAULT;
> }
>
> /* calculate and check the index into the 1st level */
> index = id / (SZ_64K / esz);
> if (index >= (l1_tbl_size / sizeof(u64)))
> - return false;
> + return -EINVAL;
>
> /* Each 1st level entry is represented by a 64-bit value. */
> if (kvm_read_guest(its->dev->kvm,
> BASER_ADDRESS(baser) + index * sizeof(indirect_ptr),
> &indirect_ptr, sizeof(indirect_ptr)))
> - return false;
> + return -EFAULT;
>
> indirect_ptr = le64_to_cpu(indirect_ptr);
>
> /* check the valid bit of the first level entry */
> if (!(indirect_ptr & BIT_ULL(63)))
> - return false;
> + return -EFAULT;
>
> /*
> * Mask the guest physical address and calculate the frame number.
> @@ -762,7 +778,10 @@ static bool vgic_its_check_id(struct vgic_its *its, u64 baser, u32 id,
>
> if (eaddr)
> *eaddr = indirect_ptr;
> - return kvm_is_visible_gfn(its->dev->kvm, gfn);
> + if (kvm_is_visible_gfn(its->dev->kvm, gfn))
> + return 0;
> + else
> + return -EFAULT;
> }
>
> static int vgic_its_alloc_collection(struct vgic_its *its,
> @@ -771,7 +790,7 @@ static int vgic_its_alloc_collection(struct vgic_its *its,
> {
> struct its_collection *collection;
>
> - if (!vgic_its_check_id(its, its->baser_coll_table, coll_id, NULL))
> + if (vgic_its_check_id(its, its->baser_coll_table, coll_id, NULL))
> return E_ITS_MAPC_COLLECTION_OOR;
>
> collection = kzalloc(sizeof(*collection), GFP_KERNEL);
> @@ -943,7 +962,7 @@ static int vgic_its_cmd_handle_mapd(struct kvm *kvm, struct vgic_its *its,
> gpa_t itt_addr = its_cmd_get_ittaddr(its_cmd);
> struct its_device *device;
>
> - if (!vgic_its_check_id(its, its->baser_device_table, device_id, NULL))
> + if (vgic_its_check_id(its, its->baser_device_table, device_id, NULL))
> return E_ITS_MAPD_DEVICE_OOR;
>
> if (valid && num_eventid_bits > VITS_TYPER_IDBITS)
> @@ -2060,9 +2079,9 @@ static int vgic_its_save_device_tables(struct vgic_its *its)
> int ret;
> gpa_t eaddr;
>
> - if (!vgic_its_check_id(its, baser,
> - dev->device_id, &eaddr))
> - return -EINVAL;
> + ret = vgic_its_check_id(its, baser, dev->device_id, &eaddr);
> + if (ret)
> + return ret;
>
> ret = vgic_its_save_itt(its, dev);
> if (ret)
> --
> 2.5.5
>
next prev parent reply other threads:[~2017-10-13 13:16 UTC|newest]
Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-27 13:28 [PATCH v2 00/10] vITS Migration fixes and reset Eric Auger
2017-09-27 13:28 ` [PATCH v2 01/10] KVM: arm/arm64: vgic-its: fix return value for restore Eric Auger
2017-10-06 14:37 ` Andre Przywara
2017-10-06 15:33 ` Auger Eric
2017-10-13 11:04 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 02/10] KVM: arm/arm64: vgic-its: Always allow clearing GITS_CREADR/CWRITER Eric Auger
2017-10-06 14:37 ` Andre Przywara
2017-10-06 15:29 ` Auger Eric
2017-10-13 11:44 ` Christoffer Dall
2017-10-13 11:54 ` Auger Eric
2017-10-13 17:54 ` Christoffer Dall
2017-10-14 8:53 ` Auger Eric
2017-10-14 15:04 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 03/10] KVM: arm/arm64: vgic-its: Improve error reporting on device table save Eric Auger
2017-10-06 14:38 ` Andre Przywara
2017-10-13 13:16 ` Christoffer Dall [this message]
2017-10-13 14:22 ` Auger Eric
2017-10-13 17:56 ` Christoffer Dall
2017-10-14 8:52 ` Auger Eric
2017-10-14 15:06 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 04/10] KVM: arm/arm64: vgic-its: Check GITS_BASER Valid bit before saving tables Eric Auger
2017-10-06 14:38 ` Andre Przywara
2017-10-13 13:24 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 05/10] KVM: arm/arm64: vgic-its: Check GITS_CBASER validity before processing commands Eric Auger
2017-10-06 14:38 ` Andre Przywara
2017-10-06 15:29 ` Auger Eric
2017-09-27 13:28 ` [PATCH v2 06/10] KVM: arm/arm64: vgic-its: Always attempt to save/restore device and collection tables Eric Auger
2017-10-06 14:38 ` Andre Przywara
2017-10-06 15:29 ` Auger Eric
2017-09-27 13:28 ` [PATCH v2 07/10] KVM: arm/arm64: vgic-its: new helper functions to free the caches Eric Auger
2017-10-13 13:35 ` Christoffer Dall
2017-10-13 14:37 ` Auger Eric
2017-10-21 9:02 ` Auger Eric
2017-10-21 14:34 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 08/10] KVM: arm/arm64: vgic-its: free caches when GITS_BASER Valid bit is cleared Eric Auger
2017-10-13 15:19 ` Christoffer Dall
2017-10-13 15:34 ` Auger Eric
2017-10-13 17:59 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 09/10] KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET Eric Auger
2017-10-12 10:57 ` Peter Maydell
2017-10-12 11:34 ` Auger Eric
2017-10-13 15:26 ` Christoffer Dall
2017-10-13 15:41 ` Auger Eric
2017-10-13 18:00 ` Christoffer Dall
2017-09-27 13:28 ` [PATCH v2 10/10] KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET Eric Auger
2017-10-13 15:40 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171013131618.GH8927@cbox \
--to=cdall@linaro.org \
--cc=andre.przywara@arm.com \
--cc=eric.auger.pro@gmail.com \
--cc=eric.auger@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=peter.maydell@linaro.org \
--cc=wanghaibin.wang@huawei.com \
--cc=wu.wubin@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox