From: Marc Zyngier <marc.zyngier@arm.com>
To: linux-arm-kernel@lists.infradead.org, kvm@vger.kernel.org,
kvmarm@lists.cs.columbia.edu
Cc: Christoffer Dall <christoffer.dall@linaro.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
James Morse <james.morse@arm.com>,
Steve Capper <steve.capper@arm.com>,
Peter Maydell <peter.maydell@linaro.org>
Subject: [PATCH v4 08/19] arm64: KVM: Dynamically patch the kernel/hyp VA mask
Date: Thu, 4 Jan 2018 18:43:23 +0000 [thread overview]
Message-ID: <20180104184334.16571-9-marc.zyngier@arm.com> (raw)
In-Reply-To: <20180104184334.16571-1-marc.zyngier@arm.com>
So far, we're using a complicated sequence of alternatives to
patch the kernel/hyp VA mask on non-VHE, and NOP out the
masking altogether when on VHE.
THe newly introduced dynamic patching gives us the opportunity
to simplify that code by patching a single instruction with
the correct mask (instead of the mind bending cummulative masking
we have at the moment) or even a single NOP on VHE.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
---
arch/arm64/include/asm/kvm_mmu.h | 45 ++++++--------------
arch/arm64/kvm/Makefile | 2 +-
arch/arm64/kvm/va_layout.c | 91 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 104 insertions(+), 34 deletions(-)
create mode 100644 arch/arm64/kvm/va_layout.c
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index 672c8684d5c2..b0c3cbe9b513 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -69,9 +69,6 @@
* mappings, and none of this applies in that case.
*/
-#define HYP_PAGE_OFFSET_HIGH_MASK ((UL(1) << VA_BITS) - 1)
-#define HYP_PAGE_OFFSET_LOW_MASK ((UL(1) << (VA_BITS - 1)) - 1)
-
#ifdef __ASSEMBLY__
#include <asm/alternative.h>
@@ -81,28 +78,14 @@
* Convert a kernel VA into a HYP VA.
* reg: VA to be converted.
*
- * This generates the following sequences:
- * - High mask:
- * and x0, x0, #HYP_PAGE_OFFSET_HIGH_MASK
- * nop
- * - Low mask:
- * and x0, x0, #HYP_PAGE_OFFSET_HIGH_MASK
- * and x0, x0, #HYP_PAGE_OFFSET_LOW_MASK
- * - VHE:
- * nop
- * nop
- *
- * The "low mask" version works because the mask is a strict subset of
- * the "high mask", hence performing the first mask for nothing.
- * Should be completely invisible on any viable CPU.
+ * The actual code generation takes place in kvm_update_va_mask, and
+ * the instructions below are only there to reserve the space and
+ * perform the register allocation.
*/
.macro kern_hyp_va reg
-alternative_if_not ARM64_HAS_VIRT_HOST_EXTN
- and \reg, \reg, #HYP_PAGE_OFFSET_HIGH_MASK
-alternative_else_nop_endif
-alternative_if ARM64_HYP_OFFSET_LOW
- and \reg, \reg, #HYP_PAGE_OFFSET_LOW_MASK
-alternative_else_nop_endif
+alternative_cb kvm_update_va_mask
+ and \reg, \reg, #1
+alternative_cb_end
.endm
#else
@@ -113,18 +96,14 @@ alternative_else_nop_endif
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
+void kvm_update_va_mask(struct alt_instr *alt,
+ __le32 *origptr, __le32 *updptr, int nr_inst);
+
static inline unsigned long __kern_hyp_va(unsigned long v)
{
- asm volatile(ALTERNATIVE("and %0, %0, %1",
- "nop",
- ARM64_HAS_VIRT_HOST_EXTN)
- : "+r" (v)
- : "i" (HYP_PAGE_OFFSET_HIGH_MASK));
- asm volatile(ALTERNATIVE("nop",
- "and %0, %0, %1",
- ARM64_HYP_OFFSET_LOW)
- : "+r" (v)
- : "i" (HYP_PAGE_OFFSET_LOW_MASK));
+ asm volatile(ALTERNATIVE_CB("and %0, %0, #1\n",
+ kvm_update_va_mask)
+ : "+r" (v));
return v;
}
diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile
index 87c4f7ae24de..93afff91cb7c 100644
--- a/arch/arm64/kvm/Makefile
+++ b/arch/arm64/kvm/Makefile
@@ -16,7 +16,7 @@ kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o $(KVM)/e
kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/arm.o $(KVM)/arm/mmu.o $(KVM)/arm/mmio.o
kvm-$(CONFIG_KVM_ARM_HOST) += $(KVM)/arm/psci.o $(KVM)/arm/perf.o
-kvm-$(CONFIG_KVM_ARM_HOST) += inject_fault.o regmap.o
+kvm-$(CONFIG_KVM_ARM_HOST) += inject_fault.o regmap.o va_layout.o
kvm-$(CONFIG_KVM_ARM_HOST) += hyp.o hyp-init.o handle_exit.o
kvm-$(CONFIG_KVM_ARM_HOST) += guest.o debug.o reset.o sys_regs.o sys_regs_generic_v8.o
kvm-$(CONFIG_KVM_ARM_HOST) += vgic-sys-reg-v3.o
diff --git a/arch/arm64/kvm/va_layout.c b/arch/arm64/kvm/va_layout.c
new file mode 100644
index 000000000000..aee758574e61
--- /dev/null
+++ b/arch/arm64/kvm/va_layout.c
@@ -0,0 +1,91 @@
+/*
+ * Copyright (C) 2017 ARM Ltd.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kvm_host.h>
+#include <asm/alternative.h>
+#include <asm/debug-monitors.h>
+#include <asm/insn.h>
+#include <asm/kvm_mmu.h>
+
+#define HYP_PAGE_OFFSET_HIGH_MASK ((UL(1) << VA_BITS) - 1)
+#define HYP_PAGE_OFFSET_LOW_MASK ((UL(1) << (VA_BITS - 1)) - 1)
+
+static u64 va_mask;
+
+static void compute_layout(void)
+{
+ phys_addr_t idmap_addr = __pa_symbol(__hyp_idmap_text_start);
+ unsigned long mask = HYP_PAGE_OFFSET_HIGH_MASK;
+
+ /*
+ * Activate the lower HYP offset only if the idmap doesn't
+ * clash with it,
+ */
+ if (idmap_addr > HYP_PAGE_OFFSET_LOW_MASK)
+ mask = HYP_PAGE_OFFSET_HIGH_MASK;
+
+ va_mask = mask;
+}
+
+static u32 compute_instruction(int n, u32 rd, u32 rn)
+{
+ u32 insn = AARCH64_BREAK_FAULT;
+
+ switch (n) {
+ case 0:
+ insn = aarch64_insn_gen_logical_immediate(AARCH64_INSN_LOGIC_AND,
+ AARCH64_INSN_VARIANT_64BIT,
+ rn, rd, va_mask);
+ break;
+ }
+
+ return insn;
+}
+
+void __init kvm_update_va_mask(struct alt_instr *alt,
+ __le32 *origptr, __le32 *updptr, int nr_inst)
+{
+ int i;
+
+ /* We only expect a 1 instruction sequence */
+ BUG_ON(nr_inst != 1);
+
+ if (!has_vhe() && !va_mask)
+ compute_layout();
+
+ for (i = 0; i < nr_inst; i++) {
+ u32 rd, rn, insn, oinsn;
+
+ /*
+ * VHE doesn't need any address translation, let's NOP
+ * everything.
+ */
+ if (has_vhe()) {
+ updptr[i] = aarch64_insn_gen_nop();
+ continue;
+ }
+
+ oinsn = le32_to_cpu(origptr[i]);
+ rd = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RD, oinsn);
+ rn = aarch64_insn_decode_register(AARCH64_INSN_REGTYPE_RN, oinsn);
+
+ insn = compute_instruction(i, rd, rn);
+ BUG_ON(insn == AARCH64_BREAK_FAULT);
+
+ updptr[i] = cpu_to_le32(insn);
+ }
+}
--
2.14.2
next prev parent reply other threads:[~2018-01-04 18:44 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-04 18:43 [PATCH v4 00/19] KVM/arm64: Randomise EL2 mappings Marc Zyngier
2018-01-04 18:43 ` [PATCH v4 01/19] arm64: asm-offsets: Avoid clashing DMA definitions Marc Zyngier
2018-01-04 18:43 ` [PATCH v4 02/19] arm64: asm-offsets: Remove unused definitions Marc Zyngier
2018-01-04 18:43 ` [PATCH v4 03/19] arm64: asm-offsets: Remove potential circular dependency Marc Zyngier
2018-01-15 8:34 ` Christoffer Dall
2018-01-15 8:42 ` Marc Zyngier
2018-01-15 9:46 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 04/19] arm64: alternatives: Enforce alignment of struct alt_instr Marc Zyngier
2018-01-15 9:11 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 05/19] arm64: alternatives: Add dynamic patching feature Marc Zyngier
2018-01-15 11:26 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 06/19] arm64: insn: Add N immediate encoding Marc Zyngier
2018-01-15 11:26 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 07/19] arm64: insn: Add encoder for bitwise operations using literals Marc Zyngier
2018-01-15 11:26 ` Christoffer Dall
2018-01-04 18:43 ` Marc Zyngier [this message]
2018-01-15 11:47 ` [PATCH v4 08/19] arm64: KVM: Dynamically patch the kernel/hyp VA mask Christoffer Dall
2018-02-15 13:11 ` Marc Zyngier
2018-02-16 9:02 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 09/19] arm64: cpufeatures: Drop the ARM64_HYP_OFFSET_LOW feature flag Marc Zyngier
2018-01-15 11:48 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 10/19] KVM: arm/arm64: Do not use kern_hyp_va() with kvm_vgic_global_state Marc Zyngier
2018-01-15 15:36 ` Christoffer Dall
2018-02-15 13:22 ` Marc Zyngier
2018-02-16 9:05 ` Christoffer Dall
2018-02-16 9:33 ` Marc Zyngier
2018-02-19 14:39 ` Christoffer Dall
2018-02-20 11:40 ` Marc Zyngier
2018-01-04 18:43 ` [PATCH v4 11/19] KVM: arm/arm64: Demote HYP VA range display to being a debug feature Marc Zyngier
2018-01-15 15:54 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 12/19] KVM: arm/arm64: Move ioremap calls to create_hyp_io_mappings Marc Zyngier
2018-01-15 18:07 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 13/19] KVM: arm/arm64: Keep GICv2 HYP VAs in kvm_vgic_global_state Marc Zyngier
2018-01-18 14:39 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 14/19] KVM: arm/arm64: Move HYP IO VAs to the "idmap" range Marc Zyngier
2018-01-18 14:39 ` Christoffer Dall
2018-02-15 13:52 ` Marc Zyngier
2018-02-16 9:25 ` Christoffer Dall
2018-02-16 15:20 ` Marc Zyngier
2018-01-04 18:43 ` [PATCH v4 15/19] arm64; insn: Add encoder for the EXTR instruction Marc Zyngier
2018-01-18 20:27 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 16/19] arm64: insn: Allow ADD/SUB (immediate) with LSL #12 Marc Zyngier
2018-01-18 20:28 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 17/19] arm64: KVM: Dynamically compute the HYP VA mask Marc Zyngier
2018-01-18 20:28 ` Christoffer Dall
2018-02-15 13:58 ` Marc Zyngier
2018-01-04 18:43 ` [PATCH v4 18/19] arm64: KVM: Introduce EL2 VA randomisation Marc Zyngier
2018-01-18 20:28 ` Christoffer Dall
2018-02-15 15:32 ` Marc Zyngier
2018-02-16 9:33 ` Christoffer Dall
2018-01-04 18:43 ` [PATCH v4 19/19] arm64: Update the KVM memory map documentation Marc Zyngier
2018-01-18 20:28 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180104184334.16571-9-marc.zyngier@arm.com \
--to=marc.zyngier@arm.com \
--cc=catalin.marinas@arm.com \
--cc=christoffer.dall@linaro.org \
--cc=james.morse@arm.com \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.cs.columbia.edu \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=peter.maydell@linaro.org \
--cc=steve.capper@arm.com \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).