From: Sean Christopherson <sean.j.christopherson@intel.com>
To: "Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>
Cc: kvm@vger.kernel.org, Nadav Amit <nadav.amit@gmail.com>,
Liran Alon <liran.alon@oracle.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>
Subject: [PATCH 07/15] KVM: nVMX: Don't reread VMCS-agnostic state when switching VMCS
Date: Tue, 7 May 2019 09:06:32 -0700 [thread overview]
Message-ID: <20190507160640.4812-8-sean.j.christopherson@intel.com> (raw)
In-Reply-To: <20190507160640.4812-1-sean.j.christopherson@intel.com>
When switching between vmcs01 and vmcs02, there is no need to update
state tracking for values that aren't tied to any particular VMCS as
the per-vCPU values are already up-to-date (vmx_switch_vmcs() can only
be called when the vCPU is loaded).
Avoiding the update eliminates a RDMSR, and potentially a RDPKRU and
posted-interrupt updated (cmpxchg64() and more).
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
---
arch/x86/kvm/vmx/nested.c | 2 +-
arch/x86/kvm/vmx/vmx.c | 18 +++++++++++++-----
arch/x86/kvm/vmx/vmx.h | 2 +-
3 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index 4651d3462df4..99164d054922 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -251,7 +251,7 @@ static void vmx_switch_vmcs(struct kvm_vcpu *vcpu, struct loaded_vmcs *vmcs)
cpu = get_cpu();
prev = vmx->loaded_cpu_state;
vmx->loaded_vmcs = vmcs;
- vmx_vcpu_load(vcpu, cpu);
+ __vmx_vcpu_load(vcpu, cpu);
if (likely(prev)) {
src = &prev->host_state;
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index b97666731425..0c48dee4159b 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -1231,11 +1231,7 @@ static void vmx_vcpu_pi_load(struct kvm_vcpu *vcpu, int cpu)
pi_set_on(pi_desc);
}
-/*
- * Switches to specified vcpu, until a matching vcpu_put(), but assumes
- * vcpu mutex is already taken.
- */
-void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+void __vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
bool already_loaded = vmx->loaded_vmcs->cpu == cpu;
@@ -1296,8 +1292,20 @@ void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
if (kvm_has_tsc_control &&
vmx->current_tsc_ratio != vcpu->arch.tsc_scaling_ratio)
decache_tsc_multiplier(vmx);
+}
+
+/*
+ * Switches to specified vcpu, until a matching vcpu_put(), but assumes
+ * vcpu mutex is already taken.
+ */
+static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
+{
+ struct vcpu_vmx *vmx = to_vmx(vcpu);
+
+ __vmx_vcpu_load(vcpu, cpu);
vmx_vcpu_pi_load(vcpu, cpu);
+
vmx->host_pkru = read_pkru();
vmx->host_debugctlmsr = get_debugctlmsr();
}
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index f81b32ae1822..f62a008c9227 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -292,7 +292,7 @@ struct kvm_vmx {
};
bool nested_vmx_allowed(struct kvm_vcpu *vcpu);
-void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
+void __vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu);
int allocate_vpid(void);
void free_vpid(int vpid);
void vmx_set_constant_host_state(struct vcpu_vmx *vmx);
--
2.21.0
next prev parent reply other threads:[~2019-05-07 16:07 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-07 16:06 [PATCH 00/15] KVM: nVMX: Optimize nested VM-Entry Sean Christopherson
2019-05-07 16:06 ` [PATCH 01/15] KVM: nVMX: Don't dump VMCS if virtual APIC page can't be mapped Sean Christopherson
2019-05-07 20:09 ` Paolo Bonzini
2019-05-07 16:06 ` [PATCH 02/15] KVM: VMX: Always signal #GP on WRMSR to MSR_IA32_CR_PAT with bad value Sean Christopherson
2019-05-07 16:06 ` [PATCH 03/15] KVM: nVMX: Always sync GUEST_BNDCFGS when it comes from vmcs01 Sean Christopherson
2019-05-07 16:06 ` [PATCH 04/15] KVM: nVMX: Write ENCLS-exiting bitmap once per vmcs02 Sean Christopherson
2019-05-07 16:06 ` [PATCH 05/15] KVM: nVMX: Don't rewrite GUEST_PML_INDEX during nested VM-Entry Sean Christopherson
2019-06-06 15:49 ` Paolo Bonzini
2019-05-07 16:06 ` [PATCH 06/15] KVM: nVMX: Don't "put" vCPU or host state when switching VMCS Sean Christopherson
2019-06-06 16:24 ` Paolo Bonzini
2019-06-06 18:57 ` Sean Christopherson
2019-06-07 17:00 ` Paolo Bonzini
2019-06-07 17:08 ` Sean Christopherson
2019-05-07 16:06 ` Sean Christopherson [this message]
2019-05-07 21:01 ` [PATCH 07/15] KVM: nVMX: Don't reread VMCS-agnostic " Paolo Bonzini
2019-05-07 16:06 ` [PATCH 08/15] KVM: nVMX: Don't speculatively write virtual-APIC page address Sean Christopherson
2019-05-07 16:06 ` [PATCH 09/15] KVM: nVMX: Don't speculatively write APIC-access " Sean Christopherson
2019-05-07 16:06 ` [PATCH 10/15] KVM: nVMX: Update vmcs12 for MSR_IA32_CR_PAT when it's written Sean Christopherson
2019-05-07 16:06 ` [PATCH 11/15] KVM: nVMX: Update vmcs12 for SYSENTER MSRs when they're written Sean Christopherson
2019-06-06 16:35 ` Paolo Bonzini
2019-05-07 16:06 ` [PATCH 12/15] KVM: nVMX: Update vmcs12 for MSR_IA32_DEBUGCTLMSR when it's written Sean Christopherson
2019-05-07 16:06 ` [PATCH 13/15] KVM: nVMX: Update vmcs02 GUEST_IA32_DEBUGCTL only when vmcs12 is dirty Sean Christopherson
2019-06-06 16:39 ` Paolo Bonzini
2019-05-07 16:06 ` [PATCH 14/15] KVM: nVMX: Don't update GUEST_BNDCFGS if it's clean in HV eVMCS Sean Christopherson
2019-05-07 16:06 ` [PATCH 15/15] KVM: nVMX: Copy PDPTRs to/from vmcs12 only when necessary Sean Christopherson
2019-06-06 16:53 ` Paolo Bonzini
2019-06-06 16:54 ` [PATCH 00/15] KVM: nVMX: Optimize nested VM-Entry Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190507160640.4812-8-sean.j.christopherson@intel.com \
--to=sean.j.christopherson@intel.com \
--cc=kvm@vger.kernel.org \
--cc=liran.alon@oracle.com \
--cc=nadav.amit@gmail.com \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=vkuznets@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox