From: Thomas Huth <thuth@redhat.com>
To: kvm@vger.kernel.org, Paolo Bonzini <pbonzini@redhat.com>
Cc: david@redhat.com, Janosch Frank <frankja@linux.ibm.com>
Subject: [kvm-unit-tests PULL 5/9] s390x: smp: Only use smp_cpu_setup once
Date: Tue, 4 Feb 2020 08:13:31 +0100 [thread overview]
Message-ID: <20200204071335.18180-6-thuth@redhat.com> (raw)
In-Reply-To: <20200204071335.18180-1-thuth@redhat.com>
From: Janosch Frank <frankja@linux.ibm.com>
Let's stop and start instead of using setup to run a function on a
cpu.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200201152851.82867-6-frankja@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
---
s390x/smp.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/s390x/smp.c b/s390x/smp.c
index 93a9594..fa40753 100644
--- a/s390x/smp.c
+++ b/s390x/smp.c
@@ -53,7 +53,7 @@ static void test_start(void)
psw.addr = (unsigned long)test_func;
set_flag(0);
- smp_cpu_setup(1, psw);
+ smp_cpu_start(1, psw);
wait_for_flag();
report(1, "start");
}
@@ -109,6 +109,7 @@ static void test_store_status(void)
report(1, "status written");
free_pages(status, PAGE_SIZE * 2);
report_prefix_pop();
+ smp_cpu_stop(1);
report_prefix_pop();
}
@@ -137,9 +138,8 @@ static void test_ecall(void)
report_prefix_push("ecall");
set_flag(0);
- smp_cpu_destroy(1);
- smp_cpu_setup(1, psw);
+ smp_cpu_start(1, psw);
wait_for_flag();
set_flag(0);
sigp(1, SIGP_EXTERNAL_CALL, 0, NULL);
@@ -172,9 +172,8 @@ static void test_emcall(void)
report_prefix_push("emcall");
set_flag(0);
- smp_cpu_destroy(1);
- smp_cpu_setup(1, psw);
+ smp_cpu_start(1, psw);
wait_for_flag();
set_flag(0);
sigp(1, SIGP_EMERGENCY_SIGNAL, 0, NULL);
@@ -192,7 +191,7 @@ static void test_reset_initial(void)
psw.addr = (unsigned long)test_func;
report_prefix_push("reset initial");
- smp_cpu_setup(1, psw);
+ smp_cpu_start(1, psw);
sigp_retry(1, SIGP_INITIAL_CPU_RESET, 0, NULL);
sigp(1, SIGP_STORE_STATUS_AT_ADDRESS, (uintptr_t)status, NULL);
@@ -223,7 +222,7 @@ static void test_reset(void)
psw.addr = (unsigned long)test_func;
report_prefix_push("cpu reset");
- smp_cpu_setup(1, psw);
+ smp_cpu_start(1, psw);
sigp_retry(1, SIGP_CPU_RESET, 0, NULL);
report(smp_cpu_stopped(1), "cpu stopped");
@@ -232,6 +231,7 @@ static void test_reset(void)
int main(void)
{
+ struct psw psw;
report_prefix_push("smp");
if (smp_query_num_cpus() == 1) {
@@ -239,6 +239,12 @@ int main(void)
goto done;
}
+ /* Setting up the cpu to give it a stack and lowcore */
+ psw.mask = extract_psw_mask();
+ psw.addr = (unsigned long)cpu_loop;
+ smp_cpu_setup(1, psw);
+ smp_cpu_stop(1);
+
test_start();
test_stop();
test_stop_store_status();
@@ -247,6 +253,7 @@ int main(void)
test_emcall();
test_reset();
test_reset_initial();
+ smp_cpu_destroy(1);
done:
report_prefix_pop();
--
2.18.1
next prev parent reply other threads:[~2020-02-04 7:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-04 7:13 [kvm-unit-tests PULL 0/9] s390x and CI patches Thomas Huth
2020-02-04 7:13 ` [kvm-unit-tests PULL 1/9] s390x: smp: Cleanup smp.c Thomas Huth
2020-02-04 7:13 ` [kvm-unit-tests PULL 2/9] s390x: smp: Fix ecall and emcall report strings Thomas Huth
2020-02-04 7:13 ` [kvm-unit-tests PULL 3/9] s390x: Stop the cpu that is executing exit() Thomas Huth
2020-02-04 7:13 ` [kvm-unit-tests PULL 4/9] s390x: Add cpu id to interrupt error prints Thomas Huth
2020-02-04 7:13 ` Thomas Huth [this message]
2020-02-04 7:13 ` [kvm-unit-tests PULL 6/9] s390x: smp: Rework cpu start and active tracking Thomas Huth
2020-02-04 7:13 ` [kvm-unit-tests PULL 7/9] s390x: smp: Wait for cpu setup to finish Thomas Huth
2020-02-04 7:13 ` [kvm-unit-tests PULL 8/9] gitlab-ci.yml: Remove ioapic from the x86 tests Thomas Huth
2020-02-04 7:13 ` [kvm-unit-tests PULL 9/9] travis.yml: Prevent 'script' from premature exit Thomas Huth
2020-02-05 14:58 ` [kvm-unit-tests PULL 0/9] s390x and CI patches Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200204071335.18180-6-thuth@redhat.com \
--to=thuth@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox