From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: kvm@vger.kernel.org, linux-kernel@vger.kernel.org,
Michael Tsirkin <mst@redhat.com>,
Julia Suvorova <jsuvorov@redhat.com>,
Paolo Bonzini <pbonzini@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>,
x86@kernel.org
Subject: Re: [PATCH RFC 4/5] KVM: x86: aggressively map PTEs in KVM_MEM_ALLONES slots
Date: Thu, 14 May 2020 12:46:24 -0700 [thread overview]
Message-ID: <20200514194624.GB15847@linux.intel.com> (raw)
In-Reply-To: <20200514180540.52407-5-vkuznets@redhat.com>
On Thu, May 14, 2020 at 08:05:39PM +0200, Vitaly Kuznetsov wrote:
> All PTEs in KVM_MEM_ALLONES slots point to the same read-only page
> in KVM so instead of mapping each page upon first access we can map
> everything aggressively.
>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
> ---
> arch/x86/kvm/mmu/mmu.c | 20 ++++++++++++++++++--
> arch/x86/kvm/mmu/paging_tmpl.h | 23 +++++++++++++++++++++--
> 2 files changed, 39 insertions(+), 4 deletions(-)
>
> diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
> index 3db499df2dfc..e92ca9ed3ff5 100644
> --- a/arch/x86/kvm/mmu/mmu.c
> +++ b/arch/x86/kvm/mmu/mmu.c
> @@ -4154,8 +4154,24 @@ static int direct_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
> goto out_unlock;
> if (make_mmu_pages_available(vcpu) < 0)
> goto out_unlock;
> - r = __direct_map(vcpu, gpa, write, map_writable, max_level, pfn,
> - prefault, is_tdp && lpage_disallowed);
> +
> + if (likely(!(slot->flags & KVM_MEM_ALLONES) || write)) {
The 'write' check is wrong. More specifically, patch 2/5 is missing code
to add KVM_MEM_ALLONES to memslot_is_readonly(). If we end up going with
an actual kvm_allones_pg backing, writes to an ALLONES memslots should be
handled same as writes to RO memslots; MMIO occurs but no MMIO spte is
created.
> + r = __direct_map(vcpu, gpa, write, map_writable, max_level, pfn,
> + prefault, is_tdp && lpage_disallowed);
> + } else {
> + /*
> + * KVM_MEM_ALLONES are 4k only slots fully mapped to the same
> + * readonly 'allones' page, map all PTEs aggressively here.
> + */
> + for (gfn = slot->base_gfn; gfn < slot->base_gfn + slot->npages;
> + gfn++) {
> + r = __direct_map(vcpu, gfn << PAGE_SHIFT, write,
> + map_writable, max_level, pfn, prefault,
> + is_tdp && lpage_disallowed);
IMO this is a waste of memory and TLB entries. Why not treat the access as
the MMIO it is and emulate the access with a 0xff return value? I think
it'd be a simple change to have __kvm_read_guest_page() stuff 0xff, i.e. a
kvm_allones_pg wouldn't be needed. I would even vote to never create an
MMIO SPTE. The guest has bigger issues if reading from a PCI hole is
performance sensitive.
Regarding memory, looping wantonly on __direct_map() will eventually trigger
the BUG_ON() in mmu_memory_cache_alloc(). mmu_topup_memory_caches() only
ensures there are enough objects available to map a single translation, i.e.
one entry per level, sans the root[*].
[*] The gorilla math in mmu_topup_memory_caches() is horrendously misleading,
e.g. the '8' pages is really 2*(ROOT_LEVEL - 1), but the 2x part has been
obsolete for the better part of a decade, and the '- 1' wasn't actually
originally intended or needed, but is now required because of 5-level
paging. I have the beginning of a series to clean up that mess; it was
low on my todo list because I didn't expect anyone to be mucking with
related code :-)
> + if (r)
> + break;
> + }
> + }
next prev parent reply other threads:[~2020-05-14 19:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-14 18:05 [PATCH RFC 0/5] KVM: x86: KVM_MEM_ALLONES memory Vitaly Kuznetsov
2020-05-14 18:05 ` [PATCH RFC 1/5] KVM: rename labels in kvm_init() Vitaly Kuznetsov
2020-05-14 18:05 ` [PATCH RFC 2/5] KVM: x86: introduce KVM_MEM_ALLONES memory Vitaly Kuznetsov
2020-05-14 19:18 ` Sean Christopherson
2020-05-15 8:24 ` Vitaly Kuznetsov
2020-05-14 18:05 ` [PATCH RFC 3/5] KVM: x86: move kvm_vcpu_gfn_to_memslot() out of try_async_pf() Vitaly Kuznetsov
2020-05-14 18:05 ` [PATCH RFC 4/5] KVM: x86: aggressively map PTEs in KVM_MEM_ALLONES slots Vitaly Kuznetsov
2020-05-14 19:46 ` Sean Christopherson [this message]
2020-05-15 8:36 ` Vitaly Kuznetsov
2020-05-15 13:58 ` Sean Christopherson
2020-05-14 18:05 ` [PATCH RFC 5/5] KVM: selftests: add KVM_MEM_ALLONES test Vitaly Kuznetsov
2020-05-14 22:05 ` [PATCH RFC 0/5] KVM: x86: KVM_MEM_ALLONES memory Peter Xu
2020-05-14 22:56 ` Sean Christopherson
2020-05-14 23:22 ` Peter Xu
2020-05-14 23:32 ` Sean Christopherson
2020-05-15 8:42 ` Vitaly Kuznetsov
2020-05-15 1:03 ` Andy Lutomirski
2020-05-15 11:15 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200514194624.GB15847@linux.intel.com \
--to=sean.j.christopherson@intel.com \
--cc=jmattson@google.com \
--cc=jsuvorov@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).