From: Sean Christopherson <sean.j.christopherson@intel.com>
To: Wanpeng Li <kernellwp@gmail.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
Paolo Bonzini <pbonzini@redhat.com>,
Vitaly Kuznetsov <vkuznets@redhat.com>,
Wanpeng Li <wanpengli@tencent.com>,
Jim Mattson <jmattson@google.com>, Joerg Roedel <joro@8bytes.org>
Subject: Re: [PATCH] KVM: LAPIC: Reset timer_advance_ns if timer mode switch
Date: Wed, 2 Sep 2020 14:23:28 -0700 [thread overview]
Message-ID: <20200902212328.GI11695@sjchrist-ice> (raw)
In-Reply-To: <1598578508-14134-1-git-send-email-wanpengli@tencent.com>
On Fri, Aug 28, 2020 at 09:35:08AM +0800, Wanpeng Li wrote:
> From: Wanpeng Li <wanpengli@tencent.com>
>
> per-vCPU timer_advance_ns should be set to 0 if timer mode is not tscdeadline
> otherwise we waste cpu cycles in the function lapic_timer_int_injected(),
> especially on AMD platform which doesn't support tscdeadline mode. We can
> reset timer_advance_ns to the initial value if switch back to tscdealine
> timer mode.
>
> Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
> ---
> arch/x86/kvm/lapic.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
> index 654649b..abc296d 100644
> --- a/arch/x86/kvm/lapic.c
> +++ b/arch/x86/kvm/lapic.c
> @@ -1499,10 +1499,16 @@ static void apic_update_lvtt(struct kvm_lapic *apic)
> kvm_lapic_set_reg(apic, APIC_TMICT, 0);
> apic->lapic_timer.period = 0;
> apic->lapic_timer.tscdeadline = 0;
> + if (timer_mode == APIC_LVT_TIMER_TSCDEADLINE &&
> + lapic_timer_advance_dynamic)
Bad indentation.
> + apic->lapic_timer.timer_advance_ns = LAPIC_TIMER_ADVANCE_NS_INIT;
Redoing the tuning seems odd. Doubt it will matter, but it feels weird to
have to retune the advancement just because the guest toggled between modes.
Rather than clear timer_advance_ns, can we simply move the check against
apic->lapic_timer.expired_tscdeadline much earlier? I think that would
solve this performance hiccup, and IMO would be a logical change in any
case. E.g. with some refactoring to avoid more duplication between VMX and
SVM:
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 35cca2e0c8026..54222f0071547 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -1571,12 +1571,12 @@ static inline void adjust_lapic_timer_advance(struct kvm_vcpu *vcpu,
apic->lapic_timer.timer_advance_ns = timer_advance_ns;
}
-static void __kvm_wait_lapic_expire(struct kvm_vcpu *vcpu)
+void __kvm_wait_lapic_expire(struct kvm_vcpu *vcpu)
{
struct kvm_lapic *apic = vcpu->arch.apic;
u64 guest_tsc, tsc_deadline;
- if (apic->lapic_timer.expired_tscdeadline == 0)
+ if (!lapic_timer_int_injected(vcpu))
return;
tsc_deadline = apic->lapic_timer.expired_tscdeadline;
@@ -1590,13 +1590,7 @@ static void __kvm_wait_lapic_expire(struct kvm_vcpu *vcpu)
if (lapic_timer_advance_dynamic)
adjust_lapic_timer_advance(vcpu, apic->lapic_timer.advance_expire_delta);
}
-
-void kvm_wait_lapic_expire(struct kvm_vcpu *vcpu)
-{
- if (lapic_timer_int_injected(vcpu))
- __kvm_wait_lapic_expire(vcpu);
-}
-EXPORT_SYMBOL_GPL(kvm_wait_lapic_expire);
+EXPORT_SYMBOL_GPL(__kvm_wait_lapic_expire);
static void kvm_apic_inject_pending_timer_irqs(struct kvm_lapic *apic)
{
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 754f29beb83e3..64be9d751196a 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -236,7 +236,14 @@ static inline int kvm_lapic_latched_init(struct kvm_vcpu *vcpu)
bool kvm_apic_pending_eoi(struct kvm_vcpu *vcpu, int vector);
-void kvm_wait_lapic_expire(struct kvm_vcpu *vcpu);
+void __kvm_wait_lapic_expire(struct kvm_vcpu *vcpu);
+static inline void kvm_wait_lapic_expire(struct kvm_vcpu *vcpu)
+{
+ if (lapic_in_kernel(vcpu) &&
+ vcpu->arch.apic->lapic_timer.expired_tscdeadline &&
+ vcpu->arch.apic->lapic_timer.timer_advance_ns)
+ __kvm_wait_lapic_expire(vcpu);
+}
void kvm_bitmap_or_dest_vcpus(struct kvm *kvm, struct kvm_lapic_irq *irq,
unsigned long *vcpu_bitmap);
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index eee7edcbe7491..dfe505a7304a3 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -3456,9 +3456,7 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu)
clgi();
kvm_load_guest_xsave_state(vcpu);
- if (lapic_in_kernel(vcpu) &&
- vcpu->arch.apic->lapic_timer.timer_advance_ns)
- kvm_wait_lapic_expire(vcpu);
+ kvm_wait_lapic_expire(vcpu);
/*
* If this vCPU has touched SPEC_CTRL, restore the guest's value if
> }
> apic->lapic_timer.timer_mode = timer_mode;
> limit_periodic_timer_frequency(apic);
> }
> + if (timer_mode != APIC_LVT_TIMER_TSCDEADLINE &&
> + lapic_timer_advance_dynamic)
Bad indentation.
> + apic->lapic_timer.timer_advance_ns = 0;
> }
>
> /*
> --
> 2.7.4
>
next prev parent reply other threads:[~2020-09-02 21:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-28 1:35 [PATCH] KVM: LAPIC: Reset timer_advance_ns if timer mode switch Wanpeng Li
2020-08-31 12:48 ` Vitaly Kuznetsov
2020-09-01 3:25 ` Wanpeng Li
2020-09-02 21:23 ` Sean Christopherson [this message]
2020-09-03 10:57 ` Wanpeng Li
2020-09-04 16:06 ` Sean Christopherson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200902212328.GI11695@sjchrist-ice \
--to=sean.j.christopherson@intel.com \
--cc=jmattson@google.com \
--cc=joro@8bytes.org \
--cc=kernellwp@gmail.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=vkuznets@redhat.com \
--cc=wanpengli@tencent.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox